Perforavimo staklės su pravažiavimu pirkti naudotą (72)

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 2 800 mm, padavimo eiga Y ašimi: 1 000 mm, padavimo ilgis Z ašis: 50 mm, X ašies padavimo greitis: 140 m/min, Y ašies padavimo greitis: 90 m/min, padavimo greitis Z ašis: 50 m/min, ruošinio ilgis (maks.): 2 800 mm, ruošinio plotis (maks.): 1 000 mm, valdymo tipas: CNC valdymas, Didelio našumo CNC gręžimo centras KDT KD-610NHZ šešių pusių ruošinių apdirbimui. Iš karto prieinamas iš sandėlio. Viršutiniai ir apatiniai gręžimo mazgai. Precizinis apdirbimas ir didelis greitis. Idealiai tinka korpusinių baldų gamybai. Galima apžiūrėti susitarus iš anksto. Lrjdpfsymz Aljx Ahcjt

Būklė: labai geros būklės (naudotas), PC control: Power Control Software: TOPDRILL BST 500 No. 2 motorized through-feed conveyors No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Lodpfx Asivawpshcsrt Total connected load (kW): 20

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles Ljdpfogwbbqex Ahcjrt No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Būklė: labai geros būklės (naudotas), PC control type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support Lrjdpjidqf Rjfx Ahcet No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control operates the movement (X-axis) of the horizontal drilling supports The CNC control operates the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Būklė: labai geros būklės (naudotas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in a line alongside other machines. Control system: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal drilling support (qty): 2 Lrsdpfsh Ryhnsx Ahcet Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical drilling support (qty): 2 Spindles per unit of lower vertical drilling supports (qty): various Upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): Upper vertical workpiece clamps (qty): 6 Chip removal conveyor Digital display of axis position data Total connected load (kW): 26

Būklė: labai geros būklės (naudotas), Electronic control unit RT 483 No. 2 motorized throughfeed conveyor belts Feed rate (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 endless screws for chip extraction Digital display for position data (axis) Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops Ljdpfefz Nanox Ahcert

Būklė: labai geros būklės (naudotas), PC control type NC 400 (software) Through-feed motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 Upper vertical drilling supports (qty.) 4 Spindles per drilling unit of the upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axes) Total connected load (kW) 48 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. Lodpsgk T Ttofx Ahcsrt The CNC control system manages the movement (Y-axis) of the stops.

Būklė: labai geros būklės (naudotas), UNIVERSALI CNC GRĄŽTŲ IR FRESAVIMO ĮRANGA DĖŽIŲ FASADAMS (arba panašioms plokštėms) 231200A) Automatinė plokščių padavimo sistema su „KUKA“ robotu, modelis KR 120 R3200 PA 231200B) CNC apdirbimo centras (su pramonine platforma) „COMEC“ modelis Frontal 1000 3S CN CA CNC portalinis įrenginys – pilna mašinos apsauga Horizontaliai judanti platforma. Judanti apdirbimo galvutė Plokščių padavimas naudojant varomus diržus Įtraukimo stalas (su varomais diržais) + ištraukimo stalas (su varomais diržais) Minimalūs ruošinio matmenys (X-Y-Z) mm 250 x 50 x 15 Lodpfezxn Nzsx Ahcjrt Maksimalūs ruošinio matmenys (X-Y-Z) mm 1100 x 350 x 30 Bendroji prijungimo galia (kW) 28 (apytiksliai) DARBINĖS GRUPĖS: 1. Pozicija: vertikalus gręžimas iš viršaus, CNC valdymas (taško į tašką) 2. Pozicija: CNC valdomas frezavimas grioveliams/vagoms (su horizontaliu elektriniu velenu) 3. Pozicija: 2 grupės vertikaliam gręžimui iš viršaus, CNC valdymas (taško į tašką) 4. Pozicija: vertikalus gręžimas iš apačios, CNC valdymas (taško į tašką) 231200C) Automatinė plokščių iškrovimo sistema su „KUKA“ robotu, modelis KR 120 R3200 PA

Būklė: geras (naudotas), Gamybos metai: 2002, 1 stotis: komponentų pjovimas reikiamu ilgiu 2 stotis: galinių paviršių gręžimas su 27, 32 ar 60 mm žingsniu, 95 mm gylyje 3 stotis: papildoma galinė gręžtuvė arba pirmos stoties gręžimo anga išpučiama Lrsdpfx Aoy Hv Uqohcet 4 stotis: lenkimo patikra Lentjuosčių apdirbimas: galimas ilgis nuo maždaug 400/450 mm iki apie 2500 mm

Būklė: labai geros būklės (naudotas), PC valdymas, tipas NC 500 (programinė įranga Tooling System) Nr. 2 varomieji pratekamieji konvejeriniai diržai Nr. 2 horizontalios gręžimo atramos Nr. 2 gręžimo agregatai ant kiekvienos horizontalios gręžimo atramos Maks. darbinis plotis (mm) 3200 - Min. darbinis plotis (mm) 205 (apytiksliai) Nr. 8 apatinės vertikalios gręžimo atramos Nr. 2 gręžimo agregatai ant kiekvienos apatinės vertikalios atramos Nr. 4 viršutinės vertikalios gręžimo atramos Nr. 2 velenai kiekvienam viršutinių gręžimo agregatui Nr. 5 viršutiniai vertikalūs ruošinio spaustuvai Nr. 2 be galo varomosios drožlių transportavimo sraigės Skaitmeninis padėties rodmuo (ašis) Bendra prijungimo galia (kW) 48 CNC valdymas kontroliuoja (X ašies) horizontalių gręžimo atramų judėjimą CNC valdymas reguliuoja transportavimo juostų (X ašies) judėjimą Ljdpfxsyvrrqe Ahcert CNC valdymas reguliuoja atramų (Y ašies) judėjimą CNC valdymas kontroliuoja visų vertikalių gręžimo atramų (Z ašies) judėjimą

Būklė: labai geros būklės (naudotas), CNC-controlled flexible automatic through-feed boring line for milling, drilling, and dowel inserting Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Driven roller conveyor "RBO" with 90° workpiece rotation device B) Gantry CNC-controlled through-feed boring machine "BIESSE" FTT 800 (for milling and drilling) Zone A: No. 2 electrospindles ISO 30 (each 4.5 kW) with tool changer, each holding 3 tools Zone B: No. 2 pre-installed locations for mounting No. 2 additional electrospindles No. 4 upper drilling units (total 128 vertical spindles + 16 horizontal spindles on Y-axis) Lrjdpfxsyhqa Ao Ahcet No. 2 tool magazines (turret) with 60 positions each for spindles (2 x 60 = total 120) C) Transfer connection with flipper (180° turn, face-down) "RBO" Ribaltatore D) Gantry CNC-controlled through-feed boring machine "BIESSE" FTT 800 R8 (for milling and drilling) 2 horizontal boring units (1 right + 1 left) with 4 heads each, with 18 spindles per head (36R+36L), total 72 Zone A: No. 2 electrospindles ISO 30 (each 4.5 kW) with tool holder magazine, each with 3 positions Zone B: No. 2 pre-set positions for installing No. 2 additional electrospindles No. 4 upper drilling units (total 128 vertical spindles + 16 horizontal spindles on Y-axis) No. 2 tool turret magazines with 60 positions each (2 x 60 = total 120) E) "BIESSE" RD dowel insertion unit No. 2 horizontal boring units (1 right + 1 left) with 5 insertion nozzles each (5LH + 5RH), total 10 nozzles F) Dust extraction and cleaning machine "WANDRES"

Būklė: naujas, Šešių pusių gręžimo staklės Gamintojas: Quick Modelis: KQ-62Lite Naujos Techniniai duomenys: - Apdirbamo gaminio ilgis: 70–2400 mm Ljdpfxszvgnds Ahcort - Apdirbamo gaminio storis: 9–60 mm - Apdirbamo gaminio plotis: 30–1220 mm - Mažiausias apdirbimo dydis: 50 x 70 mm - Judėjimo greitis ašyje X: 138 m/min - Judėjimo greitis ašyje Y: 90 m/min - Judėjimo greitis ašyje Z: 28 m/min - Staklių valdymo sistema: Higerman - Darbinis aukštis: 890 mm - Frezuojantis vėžlys: 2 x 3,5 kW, 18 000 aps./min., rankinis įrankio keitimas - Gręžimo galvutė: Viršuje – 9 vertikalios ir 4 horizontalios / Apačioje – 7 vertikalios - Padėties tikslumas: 0,03/1000 - Pakartotinio padėties tikslumas: 0,02/1000 - Galia: 25,8 kW Papildoma įranga (pasirenkama) - Staklės su apdirbamo gaminio grąžinimo sistema Kitos konfigūracijos pagal užsakymą.

Būklė: visiškai atnaujintas (naudotas), PC Control Type Power Control Professional Lrsdpfx Ahodz Uk Tecot Software: woodWOP / TopDrill BST No. 2 automatic throughfeed conveyor belts (4 x kW?) No. 2 horizontal drilling supports (digital position data display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position data display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital position data display for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Būklė: nepatikrintas (naudotas), Gamybos metai: 2009, Funkcionalumas: nepatikrintas, ruošinio ilgis (maks.): 2 500 mm, ruošinio plotis (maks.): 700 mm, ašies skaičius: 40, TECHNICAL DETAILS Minimum panel length: 170 mm Lredsyq Irhopfx Ahcot Maximum panel length: 2,500 mm Minimum panel width: 50 mm Maximum panel width: 700 mm Number of injectors: 2 Number of support units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-direction: 6 Number of spindles for horizontal drilling in X-direction: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Motor power (vertical drilling): 3 kW Motor power (horizontal drilling): 2.2 kW Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 6106

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, ruošinio ilgis (maks.): 2 500 mm, ruošinio plotis (maks.): 700 mm, sukimosi greitis (maks.): 2 800 aps./min, TECHNINĖ INFORMACIJA Minimalus plokštės ilgis: 170 mm Maksimalus plokštės ilgis: 2 500 mm Minimalus plokštės plotis: 50 mm Maksimalus plokštės plotis: 700 mm Gręžimo galvų pozicionavimas: NC Vertikaliam gręžimui skirtos ašys: 40 Horizontaliam gręžimui „Y“ kryptimi skirtos ašys: 6 Variklio galia: 3 kW Didžiausias apsisukimų skaičius: 2 800 aps./min. Vertikaliam gręžimui skirtos ašys: 4+4 Variklio galia: 2,2 kW Didžiausias apsisukimų skaičius: 2 780 aps./min. ĮRENGINIO DETALĖS Purškiklių skaičius: 2 Talpyklų skaičius: 2 ĮRANGA Valdymo sistema: WINDOWS Mediniai kaiščiai Ø8 Pastaba: Įrankiai į pasiūlymą neįtraukti. Lsdpfxoxw U Ars Ahcsrt

Būklė: labai geros būklės (naudotas), Portal machine Movable table (workpiece), movable machining head (horizontal workpiece orientation) Control: Power Control, Software: WoodWOP Lsdpfx Asdg Itnshcjrt Workpiece drive via No. 3 transport belts Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 50 Chip conveyor belt Total connected load (kW): 60 WORKING UNITS (BOTTOM): Drilling units with vertical spindles: No. 6 Independent vertical drilling spindles: No. 40 x 6 (total No. 240) Drilling head power: No. 6 x 2.7 kW WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles: No. 4 (4 x 2.7 kW) Horizontal drilling spindles – right side: No. 13 x 2 (total No. 26) Horizontal drilling spindles – left side: No. 13 x 2 (total No. 26) High-pressure glue and dowel insertion nozzles (right side): No. 8 High-pressure glue and dowel insertion nozzles (left side): No. 8 Dowel magazine for automatic dowel insertion: No. 2

Būklė: labai geros būklės (naudotas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles) Lodpfx Ahjvnq Txjcort - 5 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 5 upper vertical workpiece clamps - 2 endless screws for chip extraction CNC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – glue application and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 3 upper vertical workpiece clamps - 2 endless screws for chip extraction

Būklė: naujas, Gamybos metai: 2024, Boring and Inserting Machines Rilesa Vlg 2200, new, March 2024 Make: Rilesa Model: Vlg 2200 Description: Condition: new Year: 2023 Startup Type: to be agreed Shipping Cost: Buyer Protection Delivery Terms: EXW (EX WORKS) – COLLECTION BY BUYER Category: Machine Tool Accessories in Poland Lsdpfx Aegbpmhshcert Subcategory: Drill Bits Subcategory 2: Drilling Machines Description: DRILLING MACHINE WITH AN 8-SPINDLE MAGAZINE, TWO FRONT RIGHT AND LEFT, 3 TOP, AND 3 REAR. Year: 2024 The machine can be equipped with additional drilling heads; we are also a manufacturer of heads available in various spacings and with varying numbers of drilling spindles, tailored to individual requirements.

Būklė: visiškai atnaujintas (naudotas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, equipped with fast automatic handling system. Comprising the following machines: A) LOADING STATION “RBO” Winner C 3200 with dual pick-up and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for panel stack infeed to the loader. B) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° Lrjdpfxjdfgg Ie Ahcst C) 1st AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° G) UNLOADING STATION “RBO” Winner SC 3200 with dual pick-up, double stacking station, and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for outfeed of panel stacks from the unloader.

Būklė: naujas, 6 puselių gręžimo staklės Gamintojas: Quick Tipas: KQ-63E Naujos Techninės specifikacijos: - Apdirbamo ruošinio ilgis: 70–2800 mm - Apdirbamo ruošinio plotis: 50–1220 mm - Apdirbamo ruošinio storis: 9–60 mm - Mažiausias apdirbamas ruošinys: 70 x 50 mm - Transportavimo greitis ašyje X: 135 m/min. - Transportavimo greitis ašyje Y: 90 m/min. - Transportavimo greitis ašyje Z: 25 m/min. - Atskirai valdomi velenai: Viršuje – 2 x 12 vertikaliai, 4 horizontaliai / Apačioje – 1 x 7 vertikaliai - Staklių valdymo sistema: Higerman (vokiečių kalba) - Frezuojantis velenas viršuje: 9 kW, 24 000 aps./min. - Įrankių keitiklis viršuje: 5 padėčių - Frezuojantis velenas apačioje: 3,5 kW, 18 000 aps./min. - Varikliai: bešepetiniai servo varikliai - Pozicionavimo tikslumas: 0,03/1000 - Pakartotinio pozicionavimo tikslumas: 0,02/1000 Papildoma įranga (pasirenkama): - Staklės su ruošinio grąžinimo funkcija Greitai rasite Siūlykite stakles Užsiregistruokite į naujienlaiškį Lrodpfx Ahozvgn Djcot Atsisakykite naujienlaiškio Susisiekite su mumis Apžvalga

Būklė: labai geros būklės (naudotas), PC control unit type NC 400 (with software for managing work cycles) No. 2 through-feed motorised conveyor belts Max. working width (mm): 3200 - Min. working width (mm): approx. 205 No. 2 horizontal drilling supports No. 2 drilling units on each horizontal drilling support Spindles per horizontal drilling unit (No.): 11 No. 4 lower vertical drilling supports No. 2 drilling units on each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Digital position display (axis) Total connected load (kW): 25 The CNC controls the (X-axis) movement of the horizontal drilling supports. The CNC controls the (Y-axis) movement of the stops. Lredpfx Ahsi D D Tfecot OPTION: Front loading system (for narrow parts: Min 60mm - Max 260mm)

Būklė: labai geros būklės (naudotas), CNC-controlled Throughfeed Drilling and Dowel Insertion Line (3 machines) J06031) THROUGHFEED DRILLING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads of 2.3 HP and 11 drilling spindles per head) - No. 6 lower drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 6 upper drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 6 upper vertical workpiece clamps + No. 2 continuous screws for chip removal J06032) THROUGHFEED DRILLING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads of 2.3 HP and 11 drilling spindles per head) - No. 6 lower drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 6 upper drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 6 upper vertical workpiece clamps - No. 2 continuous screws for chip removal J06033) THROUGHFEED DRILLING MACHINE "BIESSE" KERNEL, with CNC - No. 4 lower drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) Lrsdpfx Ahsg Urn Escst - No. 4 upper vertical workpiece clamps - No. 2 continuous screws for chip removal CNC Control (software Tooling System + Woodmaster) CNC controls the movement (X-axis and Hv) of the 2 horizontal drilling supports CNC controls the movement (X-axis) of the vertical drilling supports CNC controls the movement (axes Y1 and Y2) of the drilling units + (Y-axis) of the stops CNC controls the movement (X-axis) of the workpiece clamps CNC controls the movement (X-axis) of the conveyor belts