Biesse Techno Logic pirkti naudotą (331)

Sąlyga: labai geros būklės (naudotas), Electronic control unit RT 483 No. 2 motorized throughfeed conveyor belts Feed rate (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports Kdedpfx Afofz Nano Ieg No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 endless screws for chip extraction Digital display for position data (axis) Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC control No. 2 through-feed motorised belts, feed rate up to 75 m/min. No. 2 horizontal drilling units (each with 2 drilling heads of 1.8 HP each and 22 drilling spindles each); Kdjdpjw Uhbkofx Af Ieg No. 5 lower drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 3 upper drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 5 upper vertical workpiece clamps. No. 2 (endless) screws for chip removal. PC control, type CNI. O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC No. 2 through-feed motorised belts, feed rate up to 75 m/min No. 2 horizontal drilling units (each with 6 horizontal supports – gluing and dowel insertion tools) No. 2 lower drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 2 upper vertical workpiece clamps. No. 2 (endless) screws for chip removal.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Šis "Biesse Techno Kernell" buvo pagamintas 2010 m. Tai naudota kelių verpstukų gręžimo linija su krovimo sistema, turinti Wamhoff firmos padavimo ir automatinio krovimo įrenginius. Ši mašina idealiai tinka efektyviam, didelės apimties gręžimo darbams, joje yra kelios gręžimo atramos tiek iš viršaus, tiek iš apačios. Jei ieškote aukštos kokybės gręžimo galimybių, apsvarstykite mūsų parduodamas "Biesse Techno Kernell" stakles. susisiekite su mumis ir gaukite daugiau informacijos. Mašinos privalumai Techninės mašinos privalumai • Naudota gręžimo linija su krovimo sistema • Sudaryta iš: padavimo įrenginio / kiaurinio padavimo gręžimo mašinos / automatinio krovimo įrenginio Kdsdjyap Uvopfx Af Ijg • Kiaurinio gręžimo staklės / 6 gręžimo atramos iš apačios / 4 gręžimo atramos iš viršaus / kiaurinio gręžimo staklės / 5 gręžimo atramos iš apačios / 4 gręžimo atramos iš viršaus • Pastaba: techniniai duomenys ir aprašymai paimti iš užsakymo patvirtinimo tuo metu. Duomenys pateikiami tik informaciniais tikslais ir nėra įpareigojantys.

Sąlyga: visiškai atnaujintas (naudotas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, equipped with fast automatic handling system. Comprising the following machines: A) LOADING STATION “RBO” Winner C 3200 with dual pick-up and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for panel stack infeed to the loader. B) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT Ksdpfxjdfgg Is Af Iodg with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° G) UNLOADING STATION “RBO” Winner SC 3200 with dual pick-up, double stacking station, and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for outfeed of panel stacks from the unloader.

Sąlyga: labai geros būklės (naudotas), Double-sided processing machine Can be positioned after a through-feed drilling line (for automatic drilling and dowel insertion cycle) Electronic control – Programmer RT 486 Through-feed motorized conveyor belts (No.) 2 Horizontal drilling units (No.) 2 Dowel insertion systems (incl. glue injection units) No. 6 LH + 6 RH Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) Lower vertical drilling units (No.) 4 Drilling heads per lower vertical unit (No.): 2 x 1.8 HP Upper vertical workpiece clamps (No.) 2 Total connected load (kW): 11.5 Kdedpfx Afjdi R R Rs Iog

Sąlyga: naudotas, Complete factory for furniture manufacturing, consisting of: SZ0M23) Angle panel saw "GIBEN" Type 17 (5700x2700 mm) with "SIRIO" stacking system SZ0M25) Panel saw "GIBEN" Model GammaDue (3800x2200 mm) SZ0M26) Multi-blade panel saw "GABBIANI" (finished panels 4250x2120 mm) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (paper glue application) SZ0M29) Press line "COLOMBO REMO" (1400x9600 mm) for paper/veneer/laminated panels SZ0M30) Press line "FRIZ" (1400x6200 mm) for paper/veneer/laminated panels SZ0M41) Double-sided sizing and edge banding line "IMA" Combima with high-speed "RBO-BIESSE" automatic handling system SZ0M42) Double-sided sizing and edge banding line "IMA" Combima Softforming with a second double-sided sizing and edge banding machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Model KAL 310 with splitter "NARDELLO" Model Elegance SZ0M35-36) Boring machine "BIESSE" Techno Logic with infeed and stacking system "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling system "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Model Author 600 KL SZ0M56) Roll slitting and winding machines "CEFLA-DUSPOHL" Type RSW 2200 T Kdjdpscr U Urofx Af Ieg SZ0M01) Cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Preparation line for honeycomb panels SZ0M18) No. 6 multi-daylight press "COLOMBO REMO" (dimensions ?? x ?? mm) SZ0M21) Sizing and calibrating line for honeycomb panels "GABBIANI + CELASCHI + ELMAG + COSTA LEVIGATRICI" Numerous other machines (VITAP drilling machine, circular saws, glue application machines, etc.), dust extraction system, roller conveyors, shelving (wall racks), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: VZ0250A) FEEDING STATION "RBO" Tornado C 1300, with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 continuous powered belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 2 drill heads, 1.8 kW each, with 22 drilling spindles each) - 4 lower drilling units (each with 2 split and reversible drill heads, 1.8 kW each, with various drill heads) Kdodpfxsd Nviqs Af Ieg - 3 upper drilling units (each with 2 split and reversible drill heads, 1.8 kW each, with various drill heads) - 3 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal CNC control NC 500 for both machines VZ0250C) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno SDT, with CNC - 2 continuous powered belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel inserting tools) - 2 lower drilling units (each with 2 split and reversible drill heads, 1.8 kW each, with various drill heads) - 2 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Model GP 11 VZ0250E) DESTACKING STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 (software) Through-feed motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 Upper vertical drilling supports (qty.) 4 Spindles per drilling unit of the upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axes) Total connected load (kW) 48 Kjdpfsgk T Ttex Af Ijdg The CNC control system manages the movement (X-axis) of the horizontal drilling supports. The CNC control system manages the movement (Y-axis) of the stops.

Sąlyga: labai geros būklės (naudotas), PC control system type NC 400 Deluxe No. 2 through-feed motorized conveyor belts No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support Number of spindles per horizontal drilling unit: 20 Maximum working width (mm): 3200 Minimum working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical workpiece clamps No. 2 chip removal conveyor belts Total connected load (kW): The CNC control manages the movement (X-axis) of horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts Kjdpfxerm Ik To Af Isdg

Sąlyga: labai geros būklės (naudotas), Electronic Programmer NC 400 Kdedpfx Afelwqrte Isg Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling units (qty.) 2 Drilling heads per horizontal drilling unit (qty.) 2 Spindles per horizontal drilling head (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling units (qty.) 6 Drilling heads per lower vertical drilling unit (qty.) 2 Upper vertical workpiece clamps (qty.) 4 Continuous chip extraction screws (qty.) 2 Digital position readout (axis) Total connected load (kW) 27.7 The CNC control operates the movement (X-axis) of the horizontal drilling units. The CNC control operates the movement (Y-axis) of the stops. The CNC controls the movement (Z-axis) of all vertical drilling units.

Sąlyga: labai geros būklės (naudotas), PC control type NC 400, Biesse software No. 2 throughfeed motorized conveyor belts Feed speed (m/min) 35 - 75 No. 2 horizontal drilling supports Dowel insertion systems (and glue injection units) No. 5+5 Max. working width (mm) 3200 Min. working width (mm) 235 No. 6 lower vertical drilling supports Drilling units per lower vertical drilling support (No.) 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Total connected load (kW) CNC-controlled movement (X-axis) of the horizontal drilling supports Kjdpfxod Nuwij Af Ijdg CNC-controlled movement (Y-axis) of the stops

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW PARTS, minimum width 100 mm W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); Kjdpju Tp Slofx Af Ijdg - No. 4 upper drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps + No. 2 continuous screws for chip extraction CNC control unit - PC DESK TOP (Module Editor) - software Tooling System W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 3 upper drilling units (each with drilling heads of 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps - No. 2 continuous screws for chip extraction 2nd drilling machine connected to the CNC of the 1st machine.

Sąlyga: labai geros būklės (naudotas), Dvipusė mašina, kurią galima pastatyti linijoje po pervaromą daugiašpylių gręžtuvą, skirtą automatiniam gręžimo ir kaiščių įstatymo ciklui. - Elektroninis programuotojas „CNI" NC 400 - Integruota valdymo ir elektros spinta - Didžiausias atstumas tarp horizontalių galvų: apie 3200 mm - Judama ir reguliuojama mašinos dešinė pusė (pagal plokščių plotį) - 2 vnt. motorizuotų transporterių juostų (po 0,25 AG kiekvienai, iš viso 2 varikliai) Kdodpfxow Ug A Ho Af Isg - 1+1 kaiščių talpyklos automatiškam jų padavimui į antgalius - 6+6 horizontalūs įstatymo antgaliai (klijų įpurškimo ir kaiščių įstatymo įrenginiai) - Aukšto slėgio klijų padavimo sistema - Bendra instaliuota galia: apie 5 kW.

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) throughfeed drilling line, comprising: W05022F) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control: NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with drilling heads of 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal 2nd drilling machine is connected to the NC of the 1st machine. Kdodpfx Aot Ig A Ssf Iog

Sąlyga: labai geros būklės (naudotas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 5 upper vertical workpiece clamps - 2 endless screws for chip extraction CNC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – glue application and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) Kdedpfjvnq Txex Af Iog - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 3 upper vertical workpiece clamps - 2 endless screws for chip extraction

Sąlyga: labai geros būklės (naudotas), PC control, type NC 400 No. 2 motorized through-feed conveyor belts Kodeidqd Tjpfx Af Ijdg No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling support No. 4 upper vertical workpiece clamps Chip conveyor belt Digital position display (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Ksdpfxeidqf Ro Af Iodg Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control operates the movement (X-axis) of the horizontal drilling supports The CNC control operates the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Sąlyga: labai geros būklės (naudotas), Electronic machine, CNC-controlled, PC control unit type NC 500 – Tooling System software No. 2 powered conveyor belts – feed speed (m/min) approx. 35–75 No. 2 horizontal drilling supports Drilling units per horizontal support (qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling supports Drilling units per lower vertical support (qty) 2 x 1.8 HP No. 3 upper vertical drilling supports Spindles per upper drilling support (qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 screw conveyors (endless) for chip extraction CNC controls movement (X-axis) of horizontal drilling supports CNC controls movement (Hv) of the 2 horizontal drilling supports CNC controls movement (X-axis) of vertical drilling supports CNC controls movement (axes Y1 and Y2) of the drilling units CNC controls movement (Y-axis) of the stops CNC controls movement (X-axis) of the workpiece clamps Kdodpshvi Dujfx Af Ieg CNC controls movement (X-axis) of the conveyor belts The CNC controller manages all programming of automatic work cycles.

Sąlyga: labai geros būklės (naudotas), PC control unit type NC 400 (with software for managing work cycles) No. 2 through-feed motorised conveyor belts Max. working width (mm): 3200 - Min. working width (mm): approx. 205 No. 2 horizontal drilling supports No. 2 drilling units on each horizontal drilling support Spindles per horizontal drilling unit (No.): 11 No. 4 lower vertical drilling supports No. 2 drilling units on each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Digital position display (axis) Total connected load (kW): 25 Kdjdpfxei D D Tfo Af Ieg The CNC controls the (X-axis) movement of the horizontal drilling supports. The CNC controls the (Y-axis) movement of the stops. OPTION: Front loading system (for narrow parts: Min 60mm - Max 260mm)

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), I am selling a throughfeed drilling machine BIESSE TECHNO FDT, year of manufacture 2004. Working area: X: 215 - 32,000 mm Y: max. 672 mm (horizontal spindle 24 units, 32 mm pitch) Z: Workpiece height: 9 - 65 mm Kedoi U Apmopfx Af Ijdg Min. X distance between vertical heads: 96 mm Configuration: 4+4 motors from below 1 routing motor with pneumatic on/off stroke from below 1+1 side motors, 24 spindles / 32 mm pitch 0 motors from rear 4+4 motors from above 4 material pressure rollers from above Very good condition. Available immediately. Another BIESSE TECHNO FDT with different configuration available in a line. Price upon request.

Sąlyga: naudotas, Gamybos metai: 2003, BIESSE FDT THROUGHFEED DRILLING MACHINE price: €20,000 / net Working area along X-axis: max 3200 mm min. 215 mm Workpiece thickness: max 65 mm min. 9 mm Work table height from floor: 900 mm 2 pcs horizontal heads, each with 2 drilling heads with 11 spindles, activated by a 1.1 kW (1.5 HP) motor. Each unit includes: • 2 drilling heads with 11 spindles each, equipped with quick-change system at 32mm pitch, without holders. Each head is powered by a 1.1 kW (1.5 HP) motor. • Quick manual positioning of the front heads (Y1) along a leadscrew rail using a hand crank for accurate adjustment. • Pneumatic stroke activation with scale, for manual setting of drilling depth. • Switch for manual stroke activation. • Pneumatic setting of drilling speed. • Maximum distance between the first and last spindle of the horizontal head: 704 mm • Maximum stroke of the horizontal head along the Z-axis: 5-40 mm 5 pcs lower vertical drilling head Width 96 mm, equipped with 2 motors (each 1.8 HP). Electronically activated drilling cycle. The head is equipped with: • Quick-change device for drill heads with 90° rotation capability. • Rapid positioning of heads along the beam (X-axis) via rack-and-pinion rail with gear wheel and position-indicating encoder; 2 roller guides; mechanical locking, pneumatic release. • Quick positioning of each drilling head in the transverse direction (Y-axis) by ball screw and position-indicating encoder; 1 roller guide; mechanical locking – pneumatic release. • Electronic activation via brushless servomotor; drilling parameter control via NC. Kdjdpfx Afswpq Hme Iog

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007869, Didžiausias plokštės plotis: 3200 mm Didžiausias plokštės ilgis: 800 mm Agregatų skaičius: 5 Šoniniai horizontalūs mazgai: taip Ksdpfx Afowimzye Iedg

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007870, Maks. plokštės plotis: 3200 mm Maks. plokštės ilgis: 800 mm Kjdpjwimz Hefx Af Iodg Agregatų skaičius: 2 Purkštuvų skaičius: 12

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007805, Didž. plokštės plotis: 3200 mm Didž. plokštės ilgis: 1200 mm Agregatų skaičius: 6 Kdsdpfxsx A E Suj Af Ieg Agregatų skaičius: 4 Pozicionavimas per NC valdymą: taip Šoniniai horizontalūs blokai: taip

Sąlyga: naudotas, Gamybos metai: 2006, No. 3195 CNC Machining Center BIESSE Rover C 6.50 CONF.2 Used, year of manufacture 2006 Machine already dismantled According to our customer, the machine is fully operational Multiple workpieces can be machined simultaneously on this machine Working area X: 4,850/4,600 mm Working area Y: 1,535 mm Electrical power: 228 kW, 39 A Required floor space approx. 8,100 x 6,500 mm (L x W) Total weight approx. 6,800 kg Kdedpfx Afsvn R A Hs Ijg Sale on behalf of a customer, ex location Poland, without dismantling, transport, or installation Subject to errors in description and price Dismantling, loading, and transport by us available as an option To avoid any misunderstandings, a site inspection by appointment is possible and recommended Sale is made as-is Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as seen Pictures and videos are for example purposes only and do not represent the actual items included Payment terms: Prices plus VAT, payment prior to collection or shipping Delivery terms: ex location