Biesse Techno Logic pirkti naudotą (329)

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (gantry) "RBO" Model Advantage C 320 double station, complete with central motorized roller conveyor. B) ROTARY TRANSFER UNIT (longitudinal/crosswise) with double cone "RBO" Model GPK-1 C) Double-sided sizing and edge banding machine "BIESSE" Model Stream SB2 11.0 D) ROTARY TURNER (180° inversion, top face down) "RBO" Model Ribaltatore E) ROTARY TRANSFER UNIT (crosswise/longitudinal) with double cone "RBO" Model GPK-2 Kodpfx Afohvah Ns Ijll F) STACKING STATION (gantry) "RBO" Model Advantage SC 3200 double station, complete with central motorized roller conveyor.

Sąlyga: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC MACHINING CENTER Mobile table (workpiece), movable machining head - Vertical table (workpiece) Control system: TPA - Software: Albatros Safety enclosure for the machining head Workpiece feed with transport chain Rubber rollers for securing the workpiece during feed and machining Infeed table (with conveyor belt) - Outfeed table (with conveyor belt) With automatic workpiece return system to the operator (180°) Minimum working area (X - Y - Z) mm: 260 x 40 x 10 (approx.) Maximum working area (X - Y - Z) mm: unlimited x 1300 x 80 (approx.) Separate electrical and control panel Total connected load (kW): 35 WORKING UNITS: Kjdpfjihfiijx Af Iell Drilling unit with vertical spindles (quantity): 1 Independent vertical drilling spindles (quantity): 24 (7 in X + 17 in Y) Drilling unit with horizontal spindles (quantity): 2 Independent horizontal drilling spindles (quantity): 36 (9+9 = 18 x 2) Motor power, drilling head (kW): 3 x 3 (approx.) Vertical main spindle (milling unit) quantity: 1 Vertical main spindle motor power (kW): 7.5 (approx.) Automatic tool changer system, turret - Magazine positions: 10 tool stations

Sąlyga: labai geros būklės (naudotas), PANEL SAW ANGLE SYSTEM Control: OSI Plus - Optiplanning Software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lift table (mm): 4500 x 2200 Kjdpjukhd Aofx Af Ijll 1st pusher saw with 5 grippers Rotating device (for panels) up to 90° 1st panel saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd pusher saw with 10 grippers 2nd panel saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air cushion tables (mm 2200 x 1500) Automatic unloader (bridge) for cut panels: "RBO (BIESSE)" model Lifter with no. 6 stacking positions

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edgeband Material (edges) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / SINITRA Software Feed Speed (variable) m/min: 10 – 40 (INVERTER CNC) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): - Safety milling cutter (pre-milling) AS 10 (5.8 kW) pneumatic - 2 x Chipper cutters DT 10 (5.8 + 5.8 kW) - Spraying device (for liquid non-stick agent) EDGE BANDING UNIT (for each side): - 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) - 2nd Gluing unit (pre-melter with hot air) Air Force System - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) - End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 – 25° - Pre-milling unit RS 10 (2 x 2 kW) Kjdpfxeu Rc Anj Af Iell - Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 – 25° - Multifunctional unit (radius milling and contour milling) AR 80 (0.65 kW x 2) 25 m/min ROTAX. Revolver 8+8 stations (max. 25 m/min) - Motors with automatic tool change (tools) - Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) - Flat scraper unit RC 20 + spraying units (for polishing fluid) - Buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: labai geros būklės (naudotas), Double-sided – First machine in a processing line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness with rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system: PC Base Windows / Software PC / SINTRA Feed speed (adjustable) m/min 10 – 40 (C.N. INVERTER) FORMAT PROCESSING (per side): Spray unit (for liquid release agent) No. 2 hoggers DT 10 (5.8 kW x 2) Empty space EDGEBANDING SECTION (per side): 1st gluing unit (Hot Melt + premelter) SP 30 (High Melt + Edge Control EC 40) 2nd gluing unit (premelter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 universal milling unit for grooving/rebating/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraper unit (CNC controlled) RB 40 Flat scraper unit RC 20 Kledpju Rc Hyefx Af Ijl Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007849, Didžiausias plokštės plotis: 1000 mm Ksdpfx Ajwkfzzsf Isll Didžiausias plokštės ilgis: 2200 mm Konvejerio ilgis: 9000 mm Grąžinimo įrenginys briaunų klijavimo staklėms: dešinėje pusėje

Sąlyga: labai geros būklės (naudotas), Flexible N.C. Automatiklinie zum Bohren, Fräsen und Einpressen von Beschlägen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel (Puffer-)Speicher (18 Positionen) Kjdpjidmkrsfx Af Ioll KZ2047) Übergabe mit motorisiertem Förderband KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 KZ2051) Übergabe mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 KZ2053) Übergabe mit motorisiertem Teppichband mit 90° Umlenkung auf einem Rollentisch KZ2054) Rollenförderer mit ebenfalls motorisierten Bändern (zum Bewegen der Platten um 180° zu den Montagelinien)

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), I am selling a Biesse line consisting of: Kljdsd Iv H Rjpfx Af Iol COMIL Insider dowel - milling - grooving - dowel insertion - glue application - accessories insertion - line. Year of manufacture: 1999-2001. It is possible to sell the machines separately. Vibration feeder and motorized conveyors included in the offer. For more photos and details, please send an inquiry.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, I am selling a CNC dowel drilling machine with dowel inserter: BIESSE COMIL INSIDER KT2, year of manufacture 2002. Kledpfx Aot N Rkvsf Iol - 2 pcs. CNC drilling heads, top-mounted - 1 pc. grooving saw - 2 pcs. SARG vibration dowel inserting units - 1 pc. vacuum pump This is part of a Biesse line consisting of: COMIL Insider dowel inserting – milling – grooving – dowel inserting – glue inserting – accessory inserting – line Year of manufacture 1999-2001. It is possible to sell the machines separately. Vibration dispensers and motorized conveyors included in the offer. Please send your inquiry for more photos and details.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, I am selling a CNC dowel drilling machine with dowel insertion unit BIESSE COMIL INSIDER KT2, year of manufacture 1999. - 2 pcs. CNC drilling heads from above - 1 pc. groove saw - 3 pcs. "3Master Vibratori" vibration dowel insertion units Kedet N Hmmepfx Af Iell This is part of a Biesse line consisting of: COMIL Insider dowel - milling - grooving - dowel insertion - glue application - accessory insertion - line Year of manufacture: 1999–2001. It is possible to sell the machines separately. Vibration feeders and motorised conveyors are included in the deal. For more photos and details, please send your enquiry.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, I am selling a CNC dowel boring machine with dowel inserting unit, BIESSE COMIL INSIDER KTC, year of manufacture 2002. - 2 pcs. CNC boring heads from the side Kjdot N Rixepfx Af Ijll - 1 pc. glue injection head - 3 pcs. 3Master Vibratori vibratory dowel insertion units The machine is part of a Biesse production line consisting of: COMIL Insider dowel boring – milling – grooving – dowel inserting – glue inserting – accessory inserting – line Years of manufacture 1999-2001. It is possible to sell the machines separately. Vibratory dispensers and motorized conveyors are included in the deal. For more photos and details, please send an inquiry.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, I am selling a CNC accessory insertion machine with gluing injection, BIESSE COMIL INSIDER IT2G, year of manufacture 2001. Included: - 2 pcs. CNC drawer slide insertion from above - 6 pcs. glue injection heads - 1 pc. vibrating accessory insertion unit Part of a Biesse production line comprising: Klodpfxot N N Aqj Af Iel COMIL Insider dowel - milling - grooving - dowel insertion - glue injection - accessory insertion - line Year of manufacture: 1999-2001 Machines can be sold separately. Vibration feeder and motorized conveyor are included in the offer. For more photos and details, please send an inquiry.

Sąlyga: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, CNC staklė, sunki konstrukcija, pagaminimo metai apie 1998 Kljdpfx Afsxwdz De Iol

Sąlyga: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, CNC machining center with edge banding for shaped workpieces Klsdpfx Aexraimef Isl Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis pendulum operation: 600 mm Y-axis: 1,240 mm Work table: 8 ATS workpiece supports, each with 3 vacuum cups 8 rear workpiece stops, programmable lowering, integrated in each support 8 workpiece stops, mounted 670 mm from the rear in each support 2 + 2 lateral workpiece stops 4 removable center stops 6 pneumatic lifting rails, programmable lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate working zones in X direction Auxiliary vacuum system for clamping templates Chip conveyor integrated into machine table Vacuum pump 90 m³/h Processing head configuration: Mounted on Z2 axis Drilling unit BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in X direction Grooving saw, diameter 120 mm fixed in X direction Grooving saw, diameter 120 mm fixed in Y direction Milling spindle 13.2 kW (11 kW S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Right/left rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the gluing process 16-slot tool magazine Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC-controlled, with 360-degree endless rotation Glue application for hot-melt adhesives Double pressure roller, exchangeable and switchable Heating lamp for preheating the edge material End trimming unit for cutting the edge material at 8 degrees angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results with wood edges with primer of 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. internal radius 18 mm for edges less than 1 mm thickness Min. internal radius 30 mm with edge thickness 2 mm Min. panel size for edge banding 300 x 300 mm Min. size for banding inner cutouts 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine; this configuration restricts pendulum operation. Roll diameter (edge material): 800 mm Safety equipment: * Safety mats in front of the machine * Right-side safety guard with access door No tools included Control: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/trimming and radius milling unit - Combination profile/flat scraping unit - Sawing unit

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 600 mm, Y ašies eiga: 1 535 mm, Z ašies eigos atstumas: 250 mm, Vertikalūs elektros velenai: 2 Pagrindinis variklis: 12 kW 4 ašis: C ašis Įrankių sistema: HSK-F63 Įrankių keitiklis: 22 Vertikalios gręžimo galvos: 29 Horizontalios gręžimo galvos X: 8 Horizontalios gręžimo galvos Y: 4 Pjūklo diskas griovelių pjovimui X kryptimi Strypų kiekis: 8 1 vakuuminė pompa, 250 m³/h Saugos kilimėlis Valdymo blokas: BIESSE XP 600 Programinė įranga: DIREKT CNC NC-HOPS 5.6 Įskaičiuoti 4 agregatai (durų išėmos ir pan.): - Gręžimo, frezavimo ir pjovimo agregatas su 4 velenais - Pjovimo ir frezavimo agregatas - Spynos dėžutės agregatas abiems pusėms Kljdpfx Ajx Ir Euef Ijl - Spynos dėžutės agregatas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Naudojamas ilgio diapazonas (X ašis) panelėms min./maks.: 200 – 3200 mm Naudojamas plotis (Y ašis) panelėms min./maks.: 35 – 900 mm Naudojamas storis (Z ašis) panelėms min./maks.: 8 – 60 mm 1 vertikalus elektroverpstas (4,5 kW) ISO 30 1 apvalus pjūklas (Ø 120 mm) 10 nepriklausomų vertikalių gręžimo velenų Kljdpfxex Rcy Ij Af Iel 6 nepriklausomi horizontalūs gręžimo velenai (4 X ašyje ir 2 Y ašyje) Lazerinio nuskaitymo sistema Skaitmeninis valdymas (bSolid programinė įranga)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1000004052, Įranga: Tipinė plokštelė prieinama, For sale: Biesse Stream B1 8.5 edgebander with return table. The edgebander is in continuous use – we edge band with PUR and AIR FORCE technologies. Feed speed: 1-25 m/min. Edgebanding methods: - AIR FORCE - PUR - EVA Maximum height of edged elements: 40 mm Kljdpou Suh Ssfx Af Iel Maximum width of elements on return table: 1300 mm Line composition: - 2 milling heads, height 44 mm - EVA/PUR application unit - AIR FORCE unit - end trimming saws - pre-milling profile cutters - corner rounding units - grooving saw - profile scrapers - flat scrapers - polishers Edge magazine for 12 rolls. For further information, please contact us.

Sąlyga: naudotas, Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, BIESSE Edgebanding Machine AKRON 1440-A Automatic single-sided edgebanding machine for applying and processing straight edges using coil material (melamine, PVC, ABS, veneer) and strip material (solid wood, HPL, sliced veneers, etc.). • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Ksdpfjxzb Iiox Af Iell Workpiece thickness: 10–60 mm Workpiece thickness with MFU aggregate (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edgebanding thickness (coil): 0.4–3 mm Edgebanding thickness (strip)*: 0.4–10 (12) mm Workpiece overhang: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x port Ø100 mm Compressed air connection: 7 bar Glue pot capacity: approx. 2 kg *Depending on selected aggregates - GLUING UNIT VC-511 Applies hot-melt adhesive to the workpiece, feeds the edge material onto the workpiece, automatically cuts coil material, and presses the edge precisely onto the workpiece, ensuring perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs at 0° to 15° angles. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of synthetic material edges up to a maximum thickness of 3 mm. - PRE-MILLING UNIT RT02 Pre-mills the workpiece before adhesive application. Two high-frequency motors, each 1.8 kW, 12,000 rpm. - SCRAPING UNIT RB02 For post-processing thick PVC/ABS edges. - FLAT SCRAPER RC02 Unit for removing excess glue at the joint between edge and panel. Equipped with tracing rollers and a flat knife with electronic engagement. - BUFFING UNIT SZ02 For cleaning and polishing the workpiece edge using fabric buffing wheels. The unit adjusts automatically to the workpiece thickness. - SPRAY SYSTEM FOR ANTI-ADHESIVE AGENT ADZ02 Precision application of anti-adhesive agent via injectors, numerically controlled. - KIT PRO-GLUE The PRO-GLUE kit includes: • TEKNO-GLUE system for optimal adhesive application via: - Controlled glue roller contact. - Automatic retract in case of feed stop. - Automatic ON/OFF of gluing section. • REVERSE system for switching the glue roller between co-rotating and counter-rotating modes. Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue on machines equipped for EVA. NC Axis for Fine Trimming Unit Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system. Pair of multi-profile cutters for fine trimming: bevel 25°, R=2 mm + R=1 mm, and straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of tracer to match edge thickness. Adjustment via control system. Function for processing corners only. NC Axis for Scraping Unit Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, STREAM SB LINE (WINNER W1 + STREAM C SB1/SB2 + SP30 + TURNER) Year of manufacture: 2021 Technical condition: very good Panels: particleboard, MDF, HDF, plywood, blockboard, solid wood. Coatings: ABS / PVC / laminate / veneer / lacquer / melamine. Shape: rectangular, without grooves or holes. Roughness: average < 5 µm, maximum < 35 µm. Operating temperature of components: < 50 °C. Minimum density: particleboard > 650 kg/m³, MDF > 750 kg/m³. FEEDER / STACKER WINNER W1 Element length: min 300 mm. Element width: min 240 mm (double row: min 120+120 mm), max 1200 mm (double row: max 600+600 mm). Element thickness: 10–60 mm. Element weight: up to 100 kg. Element flatness: ±1 mm/m (maximum total ±2 mm over the entire length). Uniform stack height on conveyor (H=250 mm): min 300 mm, max 1500 mm. High-speed set speeds: Y axis (carriage) 210 m/min, Z axis (frame with suction cups) 130 m/min (+ throughput ~2 cycles/min). Base capacity: 15 cycles/min (depending on composition/weight/spacings). Compressed air consumption: 950 Nl/min. Installed power: 16 kW. Option: powered panel separator – air 1050 Nl/min, power 8 kW. DOUBLE-SIDED EDGE BANDING MACHINES STREAM C SB1 (first pass) Panel overhang beyond conveyor: 35 mm. Panel thickness: 10–60 mm. Edge thickness: 0.3–3 mm. Edge height: 15–65 mm. Table height: 950 mm. Panel width: 240–1200 mm (SB1 TWIN: min 100 mm; SB1 SOFT: min 270 mm). SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires change of overhang/add-ons). STREAM C SB2 (second pass) Panel overhang beyond conveyor (fixed): 35 mm (SB2 SOFT: 50 mm). Panel thickness: 10–60 mm. Edge thickness: 0.3–3 mm. Edge height: 15–65 mm. Table height: 950 mm. Distance between pushers: 500 mm. Panel width: 240–1200 mm (SB2 SOFT: min 270 mm). Panel length: 240–2700 mm. SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires change of overhang/additional tables). GLUING UNIT SP30 Edge thickness: 0.3–3 mm. Max shear cut cross-section: 135 mm² (3 × 45). Panel thickness: 10–60 mm. Edge height: 15–65 mm. Minimum edge length: 250 mm. Kjdpfx Aow R Savjf Ioll Glue pot: 1.3 kg. Glue tank: 11 kg. Application capacity: 16 kg/h. Edge roll diameter: 800 mm. EDGE TRIM LENGTH CONTROL (options) EC40: minimum length 200 mm, speed 40 m/min, tolerance ±3 mm. EC60: minimum length 200 mm, speed 60 m/min, tolerance ±5 mm. TURNOVER DEVICES TURNER PT1 / PT2 Element length: 300–3200 mm. Element width: 200–1200 mm. Element thickness: 10–80 mm. Maximum element weight: 100 kg. Panel flatness tolerance: 1 mm/linear metre. Base flatness tolerance (area 8000 × 3000 mm): ±10 mm. Compressed air requirement: 250 L/min. Installed power: 7 kW. Assembly and commissioning available at extra charge.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 80709, plokštės aukštis: 45 mm, tuščias svoris: 2 900 kg, darbinis greitis: 333 mm/s, Įranga: CE žymėjimas, TECHNINĖS DETALĖS Maksimali plokštės storis: 45 mm Juostos storis: 13-60 mm Kraštinės medžiagos storis ritiniuose maks.: 3 mm Minimali plokštės plotis: 50 mm Minimali ilgis: 150 mm Darbo greitis: 10 - 20 m/min ĮRANGOS DETALĖS Elektros duomenys Įtampa: 400 V Dažnis: 50 Hz Matmenys ir svoris Matmenys (I x P x A): 4.950 mm x 1.700 mm x 1.530 mm Svoris: 2.900 kg ĮRANGA Klijų puodas VC 700 Pjovimo agregatas 701 Kraštų frezavimo agregatas RS 700 Kampų užapvalinimas CR 200 Pakreipiamas kraštų frezavimo agregatas + nuožulna RI 700 Kompaktiška kraštų grandiklis RBK501 Šepečiai SP700 Kraštų šlifavimo agregatas LV 700 Šildomas įvedimo kreiptuvas PLC valdymas Plokštės atraminis kreiptuvas Ritinių laikiklis didelio skersmens Kraštų pjovimo įrenginys 3 mm storio ritininiams kraštams Kljdexuqufjpfx Af Ijl CE ženklinimas

Sąlyga: geras (naudotas), Gamybos metai: 1992, • Galvutė: 21 grąžto velenai Kjdporcfiefx Af Ioll • Klijų pistoletai: 6

Sąlyga: naudotas, Gamybos metai: 1997, - Edge banding unit Klsdpfx Aed Inktof Iol - Cross-cut unit - Milling unit - Fine milling unit - Scraper - Buffing unit

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008030, Priklijuotos briaunos tipas: plona briauna, stora briauna, masyvo mediena Klijavimo sistema: EVA, PUR, karštas oras Sujungimo frezavimas: taip Kedpfx Afswvq Hgo Isll Daugiafunkcinis agregatas: taip Maks. padavimo greitis: 25 m/min Maksimali plokštės storis: 60 mm Darbo agregatai: 8 vnt.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008370, Darbinis plotas X ašyje: 5055 mm Darbinis plotas Y ašyje: 1930 mm Darbinis paviršius: Su vakuuminėmis konsolių atramomis Pagrindinio veleno galia: 19 kW Klodsx A Tk Sjpfx Af Iol Valdomų ašių skaičius: 5 ašys Maksimalus briaunos aukštis: 60 mm Gręžimo galvučių skaičius: 29 Įrankių vietų skaičius: 31

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008184, Darbinės srities X ašis: 8185 mm Darbinės srities Y ašis: 1550 mm Darbo paviršius: Su vakuuminėmis konsolėmis Pagrindinio veleno galia: 13 kW Valdomų ašių skaičius: 5 ašys Klodpfx Afsw Tivgs Iel Įrankių vietų skaičius: 22