Dyglių įkalimo staklės

BIESSE Techno S

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Crsdsvwbp Aepfx Ab Hjh

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): Crodpsgwbbqefx Ab Hjh No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Būklė: naujas, Gamybos metai: 2026, CNC gręžimo ir kaiščių įkalimo automatas, skirtas pilnai automatiniam gręžimui, klijavimui ir kaiščių įkėlimui. Gręžimo ir kaiščių apdirbimo centras pasižymi kompaktiškumu, efektyvumu, kokybe ir lankstumu. Trumpas pristatymas: • Universalus CNC valdomas gręžimo ir kaiščių įkalimo įrenginys • Klijų įpurškimo kontrolė per GIC • Uždara klijų sistema • Tinka plokščių ir masyvo apdirbimui Crodpfx Asdx Axfeb Hoh • Papildomos horizontalios ir vertikalios gręžimo galvutės – pasirinktinai • Palengvina CNC apdirbimo centrus • Optimali papildoma įranga nestingo staklėms

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, galia: 200 kW (271,92 AG), bendras svoris: 7 500 kg, MEBOR daugialapė linija su dviem būgnais, Mebor VC700 modelis, pagaminta 2016 m. Labai gera techninė būklė! Beveik kaip nauja. Daugialapė sudaro: 1- automatinis padavimo transporteris su automatiniu ritinių pozicionavimu Credpfxoy Sgane Ab Hjh 2- Pakrovimo rampa 3- Iškrovimo stalas su rūšiavimu į kairę/dešinę

Gamybos metai: 2013, būklė: naudotas, KUKA industrial robot with 6 articulated axes featuring point-to-point positioning. Independent control panel Panel orientation table Barcode scanner on the robot arm Panel feeding system via: * 1 motorized roller conveyor for preloading the panel stack * 1 motorized roller conveyor * 1 motorized roller conveyor for unloading the panel stacks Technical specifications: * Model: KR210-2 * Number of axes: 6 * Permissible rated payload: 210 kg * Machine weight: 1267 kg Codpfer Am Sqjx Ab Hjrh * Sound level: 75 dB * Installed power: 25.8 kW * Panel dimensions – min./max. length: 300/3000 mm * Panel dimensions – min./max. width: 180/1500 mm * Panel dimensions – min./max. thickness: 8/60 mm * Maximum panel weight: 90 kg

Būklė: naudotas, mašinos/transporto priemonės numeris: 008205, Darbinio eigos „X“ ašyje sritis: 4250 mm Darbinio eigos „Y“ ašyje sritis: 1320 mm Darbinis stalas: su vakuuminiais konsoliniais atramomis Pagrindinio veleno galia: 11 kW Crjdpfx Aox A Th Rjb Hoh Valdomų ašių skaičius: 4 ašys Gręžimo velenų skaičius: 31 Įrankių vietų skaičius: 22

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Klockner Chipper 120x400 H-2WT – German manufacture – Shaft condition: very good Csdpfx Asthfm Uob Hjrh TECHNICAL SPECIFICATIONS: Feed opening width: 400 mm Feed opening height: 120 mm Number of knives: 2 Rotor diameter: 420 mm Main motor power: 30 kW Feed motor power: 2 x 2.2 kW Lower infeed shaft: toothed and driven Upper infeed shaft: toothed and driven Screen: Ø 20 mm Feeder length: 2600 mm Transport dimensions (L/W/H): 300 / 245 / 170 cm Weight: 1500 kg

Būklė: labai geros būklės (naudotas), PC control: Power Control Software: TOPDRILL BST 500 No. 2 motorized through-feed conveyors No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 Crsdpfxsivawpe Ab Heh No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 20

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, CNC-Tischfräsmaschine ERGON CNC-Maschine SCM Typ: Ergon Seriennummer: AA1/012348 Baujahr: 2001 CNC-Maschine SCM ERGON Steuerung: NUM PC, Programmierung: CAD ALPHA CAM 2 Arbeitstische – simultaner oder Einzeln-Betrieb möglich 2 Werkzeugmagazine/Wechselstationen mit je 12 Plätzen 2 Elektrospindeln, je 11 kW, 18.000 U/min, können paarweise (DUOSET) unabhängig voneinander in Z-Richtung arbeiten Werkzeugaufnahme: HSK 63 1 Bohrkopf mit 18 Spindeln Werkzeugwechselmagazine: 2x12 Plätze Winkelgetriebekopf Handbuch/Bedienungsanleitung, Pneumatik- und Schaltpläne in mehreren Sprachen auf CD Technische Daten: Steuerung/Programm: NUM-PC, CAD Alpha CAM Verfahrwege X-Y-Z: 4500 – 1740 – 300 mm Arbeitstische: 2 Stück je 2160 x 1520 mm Elektrospindeln/Router DUOSET 2x11 kW, 18.000 U/min, können im Paarbetrieb arbeiten Vertikalhub von 2 unabhängigen Z-Achsen Synchron-elektrischer Schwebekopf Crsdpfjn Hx Tlsx Ab Hsh 2 Karussell-Werkzeugwechsler mit je 12 HSK63 Werkzeugplätzen Vektorachse Vakuumpumpe 90 m³/h F18-Bohrkopf: 18 Spindeln Anschlusswert: 400 Volt, 50 Hz, 3-phasig Aufstellmaße ca.: 7460 x 5500 mm (L x B) Gewicht: 7.000 kg Lager-Nr.: 2001650BXA Preis: 200.000 SEK

Būklė: naujas, Gamybos metai: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard version with: - Support with linear guidance consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for 8 mm Ø dowels, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traverse speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position over table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill length GL 70 mm) automatically set with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity of 150 to 350 mPas Csdsw Sgm Hspfx Ab Hjrh - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 liters water - Indicator lamp for glue level display in glue container - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic inclined clamping cylinders 10° for workpiece thickness up to max. 80 mm, minimum workpiece length (Y) 70 mm - 1 pc. suction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC incl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, 15" capacitive TFT industrial touchscreen display, Operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-driven user software, drilling positions freely programmable with ABSOLUTE, RELATIVE or GRID dimensions, automatic workpiece mirroring and operation optimization, two workzones programmable with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, plain text error diagnostics - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle Art. no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots prior to the start of the work program (drilling/gluing/dowel insertion). E.C.S. for 1 pc. glue nozzle Art. no. 0471-Z010 - 1 single-spindle vertical drilling unit, drilling from above, 0.65 kW (3000/5000/8000 rpm), Y-position manually adjustable via mechanical digital counter from 5–40 mm, max. drilling depth (Z) 30 mm (with drill length GL 57 mm). Max. workpiece thickness (Z) 50 mm, minimum workpiece length (Y) 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) Art. no. 0471-0830 - 4 vertical inclined clamping cylinders 10° with holder, additional, Art. no. 0470-0850 Available: at short notice