Obliavimo linija

System TM Weinig Bison / Angus Hydromat

Gamybos metai: 1999, būklė: paruoštas naudoti (naudotas), Darbinis plotis: 230 mm, darbinis aukštis: 160 mm, velenų skaičius: 5, veleno diametras: 50 mm, veleno galia: 4x 5,5 kW / 2x 11 kW, padavimas: 24 m/min, padavimo stalo ilgis: 3000 mm, vertikalaus veleno ašinė eiga: 80 mm, horizontalaus veleno ašinė eiga: 45 mm. Bendras pajungimo galingumas: 126 kW, oro poreikis: 8400–9600 m³/val., staklių matmenys (X/Y/Z): apie 3500 mm / 2000 mm / 1800 mm, svoris: apie 3500 kg. Į komplektą įeina Weinig EM-11 įstūmimo įrenginys ir tinkamas ištraukimo paskirstytuvas. Dokumentacija yra. Galima apžiūrėti vietoje. Nwjdpfsu Damdox Abzeh

Būklė: naudotas, Velenų skaičius: 5 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 120 mm Obliavimo ir profiliavimo automatas Weinig Profimat 23 E, skirtas keturpusiam medienos obliavimui ir profiliavimui su mobiliu velenu. Velenas 1: Apačioje / 5,5 kW / 40 mm Velenas 2: Dešinėje / 5,5 kW / 40 mm Velenas 3: Kairėje / bendras variklis su nr. 2 / 40 mm Velenas 4: Viršuje / 7,5 kW / 40 mm Nsdpfx Abox Ecguezswh Velenas 5: Apačioje / 4 kW / 40 mm

Būklė: labai geros būklės (naudotas), WEINIG Hydromat H23 Line, S/N 87321, Year of manufacture 1999, Ref. No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains, approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed system Planer with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic, frequency-controlled feed: 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/brake combos • Pneumatically supported pressure rollers from above • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1, 6, 7, 8, 9 with counter bearings • Spindles 8 & 9 with straight jointer • Spindles 8 & 9 with profile jointer • Spindles 6 & 8 with pneumatic pressure • Reduced roller pitch on feed system • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported lateral pressure rollers • Automatic table lubrication • Central lubrication points • Freestanding operating panel • Total connected load approx. 145 kW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list, and circuit diagram included • Machine delivered without planer heads Machine dimensions approx.: • Length 6,000 mm Nsdpfx Ajwvqklobzswh • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors fitted with NEW bearings NEW electronic motor soft start / braking devices NEW hard-chromed table plates NEW hard-chromed fences Many additional NEW PARTS fitted in the machine Condition: See attached photos – technically in first-class condition Infeed mechanisation unrefurbished – all parts complete and functional Payment: Net cash prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Subject to prior sale and errors excepted.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, galia: 250 kW (339,91 AG), pavaros tipas: hidrostatinis, kuro tipas: dyzelinas, kuro bako talpa: 390 l, darbinė masė: 39 000 kg, didžiausias leistinas svoris: 14 000 kg, padang padangų: 100 procentas, emisijos klasė: Euro 3, kaušo tūris: 6,4 m³, kasimo kibiro plotis: 2 800 mm, Gamybos metai: 2013, Priekinė ašies apkrova: 19 115 kg Kabina: ROPS/FOPS sertifikuota Kuro bako talpa: 390 litrų Stabdžiai: SAHR (spyruokliniai aktyvuoti, hidrauliškai atleidžiami) daugiadiskiai šlapieji stabdžiai kiekvienam ratui Išorinis posūkio spindulys: 7,508 m Pavarų dėžė: Dana T40000 serija, 4 pavarų automatinė transmisija su konverteriu Vidinis posūkio spindulys: 4,015 m Maksimalus greitis: 26,9 km/h (4 pavara) Galinės ašies apkrova: 18 885 kg Nwodpsxpww Aofx Abzsh Maksimalus sukimo momentas (prie 1350 aps./min.): 1674 Nm Svoris: apie 39 000 kg Galia (prie 2100 aps./min.): 250 kW / 355 AG Variklio gamintojas: Cummins QSM11 EPA Tier 3/EU Stage IIIA Kaušo talpa (prikrauta): 6,4 m³ Pjaunamoji jėga (mechaninė): 18 420 kg Pjaunamoji jėga (hidraulinė): 22 300 kg Transportavimo talpa: 14 000 kg

Būklė: geras (naudotas), Board sorting line / Sorting system / Length sorting line Esterer Right-hand discharge 5 sorting bins Total length: 26 meters 1st bin: 2 meters 2nd bin: 3 meters 3rd bin: 4 meters 4th bin: 5 meters 5th bin: >5 meters Good condition – immediately available Location: Germany, near Landau an der Isar Nsdpogw Scqjfx Abzswh Also see my other listings. I look forward to your inquiry.

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller Nsdju Agh Sopfx Abzjwh 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Būklė: geras (naudotas), Gamybos metai: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821. The press is used for gluing wooden components, e.g., panels with maximum dimensions of 7800 mm x 2100 mm. The gluing process is accelerated by heated water supplied to the press deck and kept in constant circulation (the water can be supplied from central heating or heated via electric heaters installed on the press). Heating power of the press: 72 kW. Nwsdpfsrqzgkjx Abzjh Maximum output of the press: up to 2,000 m² / 7.5 hours. Glue applicator with infeed system for Kallesoe Press Type KL40 – designed for automatic application of adhesive on each lamella and direct feeding to the LV7821 press.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1981, WEINIG Hydromat H25R, S/N 2603-624, pagaminta 1981 m., su praeinama garso izoliacijos kabina KASCHWIG – beveik nauja, pagaminta 2017 m. • Trumpas įleidimo stalas su sunkiu 6 volelių įleidimu 1. apatinis velenas 11,0 kW 2. dešinysis velenas 11,0 kW Nwsdpfotkt Tpox Abzsh 3. kairysis velenas 11,0 kW 4. viršutinis velenas 15,0 kW 5. apatinis velenas 11,0 kW 6. apatinis velenas 11,0 kW • Hidraulinė padavimo sistema 6-60 m/min. • Padavimo variklis 22,0 kW • 4 pavaromis varomi stalo volai • Veleno skersmuo 50 mm • Automatinis stalo tepimas • 1, 4, 5 ir 6 velenai su atraminiais guoliais • 1 ir 4 velenai su tiesia griovimo funkcija • Padavimo volai 170 mm • 4 vnt. hidroobliavimo galvų 150 mm • 6 vnt. hidroobliavimo galvų 250 mm • Ištraukimo jungtis virš mašinos

Gamybos metai: 2026, būklė: naujas, VKM - Package Singulation for Milled Timber With the singulation of milled timber, whether loosely stacked or in a package, pre-milled timber can be processed further in an economical manner. In a two-stage process, the timber is separated for downstream processing. It is also possible to feed the singled-out timber into a running process in a controlled manner. The inserter is mechanically designed to reliably feed even crooked timber. Additionally, it can be adjusted to the diameter of the timber to ensure that only one piece is transported further, thus preventing downtimes in the subsequent process. Nsdpfog Rxhgox Abzewh

Būklė: geras (naudotas), Gamybos metai: 2004, Universal milling machine with HEIDENHAIN TNC 124 positioning control mechanical handwheels swivel tilting table ±45° hydraulic tool clamping half-cab enclosure coolant tank manual Technical details: X travel: 600 mm y travel: 400 mm z travel: 400 mm Spindle speed: 63 – 3,150 rpm Infinitely variable feed: 12–3,000 / 6–1,500 (Z) mm/min Nodpfjigm Tcex Abzewh Quill stroke: 100 mm Head swivel range: ±90° Spindle taper: ISO SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Machine weight approx. 2.2 t Space requirement approx. 2 x 1.9 x 1.95 m