NEPERTRAUKIAMO GRĘŽIMO STAKLĖS

BIESSE TECHNO FDT

Būklė: naudotas, mašinos/transporto priemonės numeris: 008515, Maks. plokštės ilgis: 3200 mm Agregatų skaičius: 6 Ppodpfsy Edpgjx Apyor Agregatų skaičius: 2

Būklė: naudotas, SPE Renergi žemos temperatūros džiovintuvas. Renergi džiovintuvas skirtas pjuvenų ir kitų medžiagų džiovinimui biokuro gamybai. Džiovintuvas gali džiovinti pjuvenas, žievę ar medžio drožles — sumažinant drėgmės kiekį nuo maždaug 50 % iki apytiksliai 10 %. Šis žemos temperatūros džiovintuvas naudoja šiltą (arba karštą) vandenį nuo rekomenduojamos 65 °C temperatūros ir aukščiau. Didžiausia vandens temperatūra – 110 °C. Energijos tiekimo sauga: džiovintuvas gali būti prijungtas tik prie 3x400 V AC (630 A) 50/60 Hz elektros tinklo su atskiru apsauginiu įžeminimo laidininku. Energijos tiekimo duomenys: • Įtampa: 400 V AC, trys fazės • Rekomenduojama saugikliai tiekimo linijoje: ne daugiau 3x630 A • Tipinė elektros galia: 200 kW Džiovintuvo matmenys: maždaug 17,4 x 5,7 m, aukštis — 10,7 m. Reikalingas aikštelės plotas: apie 21,4 x 8,0 m. Mažiausias patalpos aukštis — 15 m (arba bent 4 m virš žaliavos padavimo angos). Oro tiekimas: mažiausiai 24 kg dujų/s šviežio oro reikia šiai mašinai veikti. Tai atitinka 20 nm³/s arba 72 000 nm³/val. Oro srautas: maks. 200 l/min Oro slėgis: min. 4,5 bar, rekomenduojama 6,0–8,0 bar Vandens tiekimas: karšto vandens tiekimas su srautu 32 dm³/s. Vandens slėgis: min. 1,5 bar, maks. 6,0 bar Darbinės temperatūros diapazonas: • Įeinančio oro temperatūra: –20 °C iki +50 °C • Santykinė drėgmė: 0 % iki 60 % Žaliava / terpė: • Santykinė drėgmė: 45 % – 55 % (pagal svorį) • Pageidaujama santykinė drėgmė išdžiovintoje medžiagoje: 8 % – 15 % Našumas: Ppsdpjwp Rqfefx Apysr • Dvigubos kameros, 4 m pločio džiovintuvas tipiniu režimu vienu įkrovimu gali išdžiovinti 2400 kg 55 % drėgmės žaliavos • Džiovintuvas pajėgus per maždaug vieną valandą išdžiovinti 6000 kg žaliavos (nuo 55 % iki 10 % drėgmės) SRE džiovintuvas suprojektuotas pagal ES direktyvas. Įranga atitinka šių norminių aktų esminius reikalavimus: • Mašinų direktyva 2006/42/EB • LVD 2006/95/EB • EMC 2004/108/EB Džiovintuvas yra Straupės sen., Cėsių r., LV-4152, Latvija. Galima apžiūra darbo dienomis nuo 8:00 iki 17:00 val., iš anksto susitarus dėl apžiūros laiko. Džiovintuvas jau išmontuotas. Visos elektros schemos, eksploatavimo instrukcijos ir vadovai prieinami. Pageidaujant galime pateikti kontaktą pasikonsultuoti su šio tipo džiovintuvą eksploatuojančiu specialistu. Kaina: 20 000,00 EUR (PVM neįskaičiuotas).

Būklė: naudotas, mašinos/transporto priemonės numeris: 007805, Didž. plokštės plotis: 3200 mm Didž. plokštės ilgis: 1200 mm Agregatų skaičius: 6 Agregatų skaičius: 4 Pozicionavimas per NC valdymą: taip Ppodpox A E Suofx Apysr Šoniniai horizontalūs blokai: taip

Būklė: labai geros būklės (naudotas), Electronic machine, CNC-controlled. PC control unit type NC 500 - Tooling System software. Psdpfx Aeyyw S Rspyspr No. 2 powered through-feed conveyor belts - Feed speed (m/min): approx. 35 - 75 Max. working width (mm): 3200 - Min. working width (mm): 215 No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support (11 spindles per drilling unit) No. 5 lower vertical drilling supports Drilling units per lower vertical drilling support: 2 x 1.8 HP No. 2 upper vertical drilling supports Spindles per upper drilling support unit: 2 x 1.8 HP No. 4 upper vertical workpiece clamps. No. 2 screw (endless) conveyors for chip removal Digital display for positional data (axes). Total connected load (kW): 62.7 The CNC system controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Hv) of the 2 horizontal drilling supports CNC controls the movement (X-axis) of the vertical drilling supports CNC controls the movement (axes Y1 and Y2) of the drilling units CNC controls the movement (Y-axis) of the stops CNC controls the movement (X-axis) of the workpiece clamps CNC controls the movement (X-axis) of the conveyor belts The CNC control manages all programming of automatic work cycles

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions Length: 20 – 1250 mm Width: 100 – 800 mm Thickness: 10 – 60 mm Active center stop: Max. length 600 mm Configuration: - Horizontal drilling unit with 3 individually selectable spindles, spindle spacing 32 mm - 1 dowel insertion unit (32 mm from the first drilling spindle) - Glue nozzle with adjustable glue volume - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimensions: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Robust steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drive (Y and Z axes) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side stops and rear stop rail - Center stop pneumatically lowerable, manually controlled via selector switch - 6 top hold-down cylinders, manually adjustable Pjdoxdl Raspfx Apyjpr - Central lubrication power control PC85T Modern control system based on Windows PC

Būklė: labai geros būklės (naudotas), PC valdymas, tipas NC 500 (programinė įranga Tooling System) Nr. 2 varomieji pratekamieji konvejeriniai diržai Nr. 2 horizontalios gręžimo atramos Nr. 2 gręžimo agregatai ant kiekvienos horizontalios gręžimo atramos Maks. darbinis plotis (mm) 3200 - Min. darbinis plotis (mm) 205 (apytiksliai) Nr. 8 apatinės vertikalios gręžimo atramos Nr. 2 gręžimo agregatai ant kiekvienos apatinės vertikalios atramos Nr. 4 viršutinės vertikalios gręžimo atramos Nr. 2 velenai kiekvienam viršutinių gręžimo agregatui Nr. 5 viršutiniai vertikalūs ruošinio spaustuvai Nr. 2 be galo varomosios drožlių transportavimo sraigės Skaitmeninis padėties rodmuo (ašis) Pedpeyvrrqjfx Apyopr Bendra prijungimo galia (kW) 48 CNC valdymas kontroliuoja (X ašies) horizontalių gręžimo atramų judėjimą CNC valdymas reguliuoja transportavimo juostų (X ašies) judėjimą CNC valdymas reguliuoja atramų (Y ašies) judėjimą CNC valdymas kontroliuoja visų vertikalių gręžimo atramų (Z ašies) judėjimą

Būklė: labai geros būklės (naudotas), Electronic Programmer NC 400 Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling units (qty.) 2 Drilling heads per horizontal drilling unit (qty.) 2 Spindles per horizontal drilling head (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling units (qty.) 6 Drilling heads per lower vertical drilling unit (qty.) 2 Upper vertical workpiece clamps (qty.) 4 Continuous chip extraction screws (qty.) 2 Digital position readout (axis) Total connected load (kW) 27.7 Ppedpfxolwqrts Apyer The CNC control operates the movement (X-axis) of the horizontal drilling units. The CNC control operates the movement (Y-axis) of the stops. The CNC controls the movement (Z-axis) of all vertical drilling units.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: Pedpfx Ajvf E Avjpyepr - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: visiškai atnaujintas (naudotas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, equipped with fast automatic handling system. Comprising the following machines: A) LOADING STATION “RBO” Winner C 3200 with dual pick-up and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for panel stack infeed to the loader. Ppjdpfxedfgg Is Apysr B) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° G) UNLOADING STATION “RBO” Winner SC 3200 with dual pick-up, double stacking station, and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for outfeed of panel stacks from the unloader.

Būklė: labai geros būklės (naudotas), CNC-controlled (automatic) throughfeed drilling line, comprising: W05022F) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control: NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); Psdpfx Apot Ig A Seyepr - No. 3 upper drilling supports (each with drilling heads of 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal 2nd drilling machine is connected to the NC of the 1st machine.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, I am selling a 2-head UV curing tunnel Superfici Essiccatoio UV, model Poliedra S.Cure 1650x2 + TT1 3500, year of manufacture 2015. Immediately available. Requires repairs: display and power sources for both UV units. Ppjdpeffk Etofx Apyer

Būklė: labai geros būklės (naudotas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) Ppsdpfx Aevnq Txopysr - 5 upper vertical workpiece clamps - 2 endless screws for chip extraction CNC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – glue application and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 3 upper vertical workpiece clamps - 2 endless screws for chip extraction

Būklė: labai geros būklės (naudotas), PC control type NC 400 (software) Through-feed motorized conveyor belts (qty.) 2 Ppedpfsgk T Ttjx Apysr Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 Upper vertical drilling supports (qty.) 4 Spindles per drilling unit of the upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axes) Total connected load (kW) 48 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. The CNC control system manages the movement (Y-axis) of the stops.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Dulkių ir pjuvenų ištraukimo filtras. Podpfx Apotzld Ueyepr

Būklė: labai geros būklės (naudotas), PC control, type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty): 11 Psdpfx Aoidqd Tspyepr Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling support No. 4 upper vertical workpiece clamps Chip conveyor belt Digital position display (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts