Kapinė pjūklas pirkti naudotą (133)

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1500 kg Total power requirement: 10.2 kW Fully optimizing automatic cross-cut saw TR-600 MATRIX-6000 - Motor drive power: 9.2 kW - Saw blade diameter: 600 x 30 mm, Z=60 - Cutting capacity according to cutting diagram - Cutting capacity: 150 x 365 mm - Cutting capacity: 130 x 440 mm - Cutting capacity: 100 x 530 mm - Cutting capacity: 60 x 580 mm - Cutting capacity: 30 x 610 mm - Cutting cycle: 6 seconds - Hydraulic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1500 kg Electrical connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x 100 mm diameter - Extraction capacity: 2400 m³/h - Air velocity at the center of the extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Max. pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and pinion and feedback via servo motor - Pneumatic lifting of the pusher at cycle end and upper return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Working surface inclination 8° - Positioning tolerance: +/- 0.4 mm Nsdpfx Afjv A Htks Iocl Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cut lists directly at the machine control - Up to 1000 cut lists with 10 dimensions each - One list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimal waste, and priority) - Standard USB and Ethernet port - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing material of variable lengths, with single or bundle infeed - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings to ensure full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cut lists at PC €360.00 - Outfeed table €360.00/m

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimized automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity according to cutting diagram - Cutting capacity 135 x 280 mm - Cutting capacity 125 x 295 mm - Cutting capacity 95 x 325 mm - Cutting capacity 80 x 340 mm - Cutting capacity 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - 8° inclined worktable - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm Ncsdpfxov A Htds Af Iel - Pusher speed: 90 m/min. - Drive by brushless servomotor - Feed system with precision rack and pinion, measurement by servomotor - Pneumatic pusher lift at end of cycle and upper return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - 8° inclined working surface - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Cutting list creation directly via machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard USB and Ethernet ports - Including OPTI function for automatic measuring of the workpiece to be cut. Optimal solution for processing material with variable lengths, for single or bundle feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, priority) - Including OPTI PLUS function for mark detection, enabling full optimization and removal of knots and defects - Marking with chalk Option: - Pneumatic side clamp €850.00 - Cutting list creation via PC €360.00 - Outfeed table €360.00/m

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (LxWxH): 0x0x0 mm Weight: 900 kg Total power requirement: 5 kW Automatic optimizing cross-cut saw with full optimization TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle time: 4 seconds - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 900 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air speed at center of extraction port: approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Drive via brushless servo motor - Feed system with precision rack-and-pinion and measurement via servo motor - Pneumatic lift of the pusher at cycle end and overhead return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - Worktable inclination 8° - Positioning tolerance +/- 0.4 mm Control: - High-resolution 12'' touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on the machine control - Up to 1000 cutting lists with 10 sizes each Ncjdpov A Hr Tjfx Af Ijl - Single list with 10,000 sequential sizes - 3 optimization options: maximum length, sequence, and workpiece sequence - 3 optimization options: volume, minimum waste, and priority - Standard USB and Ethernet interface - Including OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing material with variable lengths, with single or batch feeding. 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimum waste, and priority) - Including OPTI PLUS function for reading chalk markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cutting lists on PC €360.00 - Outfeed table €360.00/m

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 4500x1200x1200 mm Weight: 1500 kg Total Power Requirement: 8 kW Optimizing Cross-Cut Saw WS1 - Cutting Height Pos. A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Pos. B: 100x290, 80x315, 50x340, 30x355, 15x365 mm - Cutting speed up to 100 cycles/min. - Feed speed: 120 m/min - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3600 rpm - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm - Cutting accuracy: +/- 0.8 mm - Infeed roller conveyor right, 2000 mm with double marking station Njdpfxevz Hz Ej Af Iocl - Discharge table left, 1000 mm - Extraction port diameter: 200 mm - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7” color touch screen for simple operation + fixed length cross-cut mode + sequential cross-cut mode (10 different dimensions storable) + cross-cutting of marked chalk lines + fixed length and marked chalk line cross-cutting - CE conformity - Dimensions (L=4500, W=1200, H=1200 mm) - Weight: 1500 kg

Sąlyga: naujas, Gamybos metai: 2025, Matmenys (Ilgis/Plotis/Aukštis) 3000x1070x1200 mm Svoris 1150 kg Bendras galingumo poreikis 10 kW Optimizuojantis skersavimo pjūklas OPTIMAX 100 - Pjūklo variklis 7,5 kW - Sukimosi greitis 3200 aps./min. - Pavaros variklis 2,0 kW - Pavaros greitis bepakopis, iki maks. 80 m/min - Pjovimo dažnis iki 80 taktų/min. - Pjūklo disko Ø 455 mm - Pjūklo disko skylė 30 mm - Pjovimo aukštis 100 mm (pagal pjovimo diagramą) - Didelis pjovimo tikslumas ± 1 mm Nedpfxsvz Hzxj Af Iscl - Minimali ruošinio ilgis 300 mm - Mažiausias atstumas tarp žymėjimų 20 mm - Mažiausias ruošinio dydis 300 x 30 x 10 mm - PLC valdymas su liečiamuoju ekranu patogiam naudojimui + fiksuoto ilgio pjovimo režimas + sekvencinio pjovimo režimas (galima išsaugoti 10 skirtingų matmenų) + pjovimas pažymėtų kreidos linijų pagalba + fiksuoto ilgio ir pažymėtų kreidos linijų pjovimas - Įbėgimo ritininis stalas dešinėje 1200 mm - Išbėgimo stalas kairėje 1000 mm - Suslėgto oro jungtis 8 bar - CE atitiktis - Matmenys L=3000, P=1070, A=1200 mm - Svoris 1150 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Total power requirement 0 kW Automatic Angle Cross-cut Saw CT-600-6000 - Hydraulic under-table circular saw unit - Drive motor power 7.5 kW - Saw blade diameter Z=48x5 600 mm - Saw blade bore diameter 30 mm - Inclined work table Yes - Automatic table rotation -70° 0° +70° - Rotation speed from/to 0°/70° 3s - Positioning accuracy +/- 0.2° - Pneumatic workpiece hold-down clamps 2 pcs - Pneumatic side aligners 2 pcs - Safety cover over crosscut unit Yes - Cutting capacity at 0°: 160 x 310 mm, 80 x 390 mm - Cutting capacity at 45°: 160 x 220 mm, 80 x 270 mm - Cutting capacity at 70°: 160 x 90 mm, 80 x 130 mm - Minimum workpiece thickness 10 mm Connection data - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Compressed air consumption at 8 bar per cycle approx. 8 Nl - Extraction spigots Ø100 mm 2 pcs - Extraction spigot Ø160 mm 1 pc - Air velocity at extraction spigot center approx. 25-35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Driven by brushless servo motor - Feed system with precision rack and pinion and measurement via servo motors - Pneumatically liftable push point for passing over the workpiece in the subsequent cycle - Positioning tolerance +/- 0.4 mm Control: - Beckhoff industrial PC control with Windows CE operating system with touch screen - Data entry via keyboard, USB, or network - 5 optimization criteria: a) Maximum length, b) Minimal waste Njdpfx Aevz Eq Sjf Ijcl c) Part priority d) Volume e) Value - Processing individual part lists or combining orders - Graphical display of parts in process - Batch processing capability - 70 cutting lists with 21 dimensions each or one cutting list with 400 dimensions - Safety device - CE compliant - Complete safety enclosure included

Sąlyga: naujas, Gamybos metai: 2025, Matmenys (ilgis/plotis/aukštis) 9400x1200x1600 mm Svoris 1400 kg Bendras energijos poreikis 12,5 kW Automatinė kapojimo pjūklas ASKS-6060 - Pjūklo disko skersmuo 600 mm - Pakrovimo stalo ilgis 6 m - Maksimali įėjimo ilgis 6,1 m - Išleidimo stalo ilgis 1,2 m - Pjūvio storis 10–140 mm Nsdpfx Afevz Ekro Iocl - Pjūvio plotis 30–300 mm - Maks. pjovimo sritis 120 x 280 mm - Maks. storis x plotis 140 x 300 mm - Padvado greitis 5-30 m/min - Pjūklo disko skylė 30 mm - Frezavimo veleno apsukos 3150 aps./min - Servo pavaros variklio galia 1,0 kW - Pjovimo variklio galia 11,0 kW - Bendra galia 12,5 kW - Įtampa 400 V, 50 Hz, 3 fazės - Medžiagos prispaudimas cilindru, oro slėgis 0,5–0,7 MPa - Pjūvio tolerancija +/-1 mm - Nusiurbimo jungtis 2 x 150 mm - Tarpinis relė Honeywell - Elektriniai komponentai Schneider - PLC & liečiamas ekranas Siemens - Staklių matmenys 9,4 m x 1,2 m x 1,6 m (6 m modelis) - Staklių svoris 1400 kg Pakuotės matmenys: 1 pakas 1600*420*800 mm 1 pakas 1300*1120*1990 mm 1 pakas 2300*720*590 mm

Sąlyga: naudotas, Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 035-123781, Naudota Gama 63 K3 mašina veikianti. Visi duomenys pateikti nuotraukose ir PDF failuose. Ncjdpfx Afox Ev Ubs Isl

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, As-new system for the production of honeycomb cardboard from corrugated board. Original price €600,000.00. Njdpfjtqpd Hex Af Ijcl

Sąlyga: naujas, Touch - 7” colour display Cutting program input directly via touch screen Chalk line detection Operation according to stored program (100 program slots) 1x ejector unit (kicker) Ncjdpfx Afedify Io Ijl Hydraulic blade feed Machine compliant with CE standards Brake motor Safety cover on working area Including 1x TCT saw blade Saw motor power: 7.5 kW, 400 V, 50 Hz Saw blade diameter: 500 mm Feed system via toothed belt drive Feed speed: 120 m/min Cutting accuracy: +/- 0.8 mm Cutting capacity: up to 100 cuts/min Minimum workpiece length: 550 mm Minimum workpiece width: 40 mm Options: - Additional infeed table - Additional outfeed table - TCT saw blade, 500 mm diameter

Sąlyga: naujas, Gamybos metai: 2026, Product Details Crosscut and Mitre Circular Saws Model ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust cast iron construction Precision linear ball bearing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Re-adjustable fixed stops Lower saw blade guard can be connected to dust extraction Machine mounted on a mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2,800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Nedjcnz Rvepfx Af Iscl Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - Upon request, we are happy to offer you the saw blade as well.

Sąlyga: naujas, Gamybos metai: 2026, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200mm Robust grey cast iron construction Precision ball bushing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors left and right Left side features scale and length stop slider Technical Specifications Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm (at 90°) Cutting height: 200 mm (at 90°) Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Saw blade diameter: 520 mm (not included as standard) Extraction port: 100 mm Weight: 490 kg Location: Available from stock, 54634 Bitburg Ncsdpfx Aow Hl Aqjf Ijl - Immediately available - Upon request, we are also happy to offer you the appropriate saw blade.

Sąlyga: naudotas, Agregatų atstumas iki 3,5 m, didžiausias diskų skersmuo 350 mm, pjovimo plotis apie 150 mm, galimybė pjauti vienu agregatu, pjovimo kampo reguliavimas nuo -45 iki +45 laipsnių. Ncedpfjxyzlxsx Af Iel

Sąlyga: naudotas, Pjovimo aukštis ties 90°: 135 mm Nodsx I Ai Dopfx Af Ijcl Pjovimo ilgis: mm Kampų diapazonas horizontaliai: - Kampų diapazonas vertikaliai: -60° iki +60° Volelių takas / atraminis stalas: ne Pjūklo disko skersmuo: Sukimosi greitis: 2800 aps./min Variklio galia: 2 kW Variklio stabdis: taip Prispaudėjas: taip Purškimo įrenginys: taip Nutraukimo jungtis: 100 mm Staklių ilgis: Staklių plotis: Svoris: 110 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 035-110235, pjūklo disko skersmuo: 650 mm, pjovimo aukštis (maks.): 245 mm, sukimosi greitis (maks.): 2 800 aps./min, Nėra minimalaus kainos – užtikrintas pardavimas aukščiausiai pasiūliusiam! TECHNINIAI DUOMENYS Njdpfxjxpvtio Af Ijcl Pjūklo disko skersmuo: 650 mm Didžiausias pjovimo aukštis: 245 mm Apsisukimų skaičius: 2 800 aps./min Gręžinio skersmuo: 30 mm Pleišto storis: 5,4 mm Pjūvio plotis: 13 mm Pjūklo aukštis prie 90°: 245 mm Pjūklo aukštis prie 45°: 164 mm Pjūklo aukštis prie 30°: 113 mm Įvado srovės tipas: trifazė MAŠINOS DUOMENYS Variklio galia: 10 kW Variklio apsisukimų skaičius: 3 000 aps./min Elektrinis pjūklo kampo reguliavimas: 90° – 30° su skaitmeniniu indikatoriumi Sukamojo stalo diapazonas: 30° – 150° Elektros duomenys Fazės: 3 + N + PE Įtampa: 400 V Dažnis: 50 Hz Srovės stipris: 17 A ĮRANGA Automatinis apsauginis gaubtas Pneumatinis skersinis pavara Pjovimo ilgio žymėjimo lazeris

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 700 mm, pjovimo aukštis (maks.): 250 mm, darbinio aukščio: 850 mm, galia: 7,5 kW (10,20 AG), We are selling 1 x JRIMAC Under-Table Crosscut Saw UKS 1,000 Cross-sections: 60x940 - 140x820mm - 180x720 - 220x520 - 240x340 Njdpfxjrfudrs Af Ijcl Max. cutting height: 260mm Saw blade: 700mm Working height: 850mm Extraction ports below and above: 160mm - Continuously adjustable pneumatic feed rate - Hydraulic brake cylinder for consistent stroke speed - Pneumatically controlled workpiece clamping device - Cut initiation via two-hand control with safety shield - Roller conveyors and stop systems available upon request

Sąlyga: naudotas, Mitre saw BERG & SCHMIDT Junior 275 -used- Underframe, Nodou R S I Hspfx Af Iocl Mobility kit ----- Technical specifications ----- Cutting height: 60 mm, Voltage: 230 V

Sąlyga: naujas, Crosscut and Mitre Circular Saw GRAULE ZS 85 N - Tiltable - Includes: - Crosscut and Mitre Circular Saw GRAULE ZS 85 N Ncsdsu R Sycepfx Af Ijl - tiltable - Material support shoulder made from laminated wood - without machine stand and saw blade - Includes: - GRAULE Machine Stand for models ZS 85 N to ZS 170 Includes: - GRAULE Infeed Roller Conveyor Type RO Complete with support legs and connection brackets Ball-bearing mounted plastic rollers, diameter 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for conveyor height 885 +/- 10 mm Includes: - Roller Conveyor/Length Stop GRAULE Type RLK with scale and fold-away material stop (to the rear). Ball-bearing mounted plastic rollers, diameter 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for conveyor height 885 +/- 10 mm - New showroom machine -

Sąlyga: naujas, Crosscut and Mitre Circular Saw GRAULE ZS 170 N - Tiltable - Includes: - GRAULE ZS 170 N crosscut and mitre circular saw - Tiltable - - Without machine stand and saw blade - Includes: - GRAULE machine stand For model ZS 135 N and ZS 170 N Njdpfx Afju R Sype Iocl Includes: - GRAULE infeed roller conveyor, type RO Complete with support feet and connecting bracket Ball-bearing plastic rollers, Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for conveyor height 885 +/- 10 mm Includes: - GRAULE roller conveyor/length stop, type RLK With scale And rearward folding material stop. Ball-bearing plastic rollers, Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for conveyor height 885 +/- 10 mm - new display machine -

Sąlyga: naujas, Semi-automatic crosscut saw SALVAMAC LEGEND 500 Max. cutting height: 125 mm Introductory special price Includes: - Semi-automatic crosscut saw SALVAMAC LEGEND 500 Max. cutting height: 125 mm SAFE – SOLID – FAST The compact, simple, robust, and innovative machine guarantees maximum safety, flexibility, and reliability. Standard equipment: - Automatic safety and pressure device - Ergonomically positioned two-hand control - Rigid safety shield - Incl. carbide-tipped saw blade 500 mm, Z = 108 Technical data: Maximum cutting capacity: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Speed: 2,800 rpm Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction port: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between two stops (optional): 60 mm Note: Basic price without roller conveyors. When installing the saw, at least 1 m of support table or roller conveyor must be installed on both the left and right sides of the saw. Includes: - Roller conveyor without scale right side, per meter Roller conveyor, 320 mm width, with 100 mm stop rail and galvanized rollers, Load capacity: 230 kg, Diameter: 60 mm, spacing: 250 mm, Right side of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Nsdpsvtrkijfx Af Iscl Includes: - Roller conveyor with stop rail and scale left side, per meter Roller conveyor, 320 mm width, with 100 mm stop rail and galvanized rollers, Load capacity: 230 kg, Diameter: 60 mm, spacing: 250 mm, Left side of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Includes: - Pneumatically pivoting stop, 200 mm length - New showroom machine -

Sąlyga: labai geros būklės (naudotas), Rėmelių giljotina Valiani V110 Dvigubi 45° kampai Tiesūs kampai iki 90° Didžiausias darbinis plotis 100 mm Ncedpfxsxu Uh Aj Af Ijl Pjovimo agregato mechaninis padavimas CE sertifikatas

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Cutting to fixed lengths according to cut list and cropping of defects Cutting cycle: Defect cropping by chalk marking Cutting to fixed lengths, Standard and sequential cutting, Sequential cutting in marking mode. Infeed material: Variable lengths in single-piece loading WS.1 Through-feed cross-cut saw 4 pcs. lower feed rollers 1 pc. loading table 2 m right side with double marking table 1 pc. outfeed table 1 m with rear stop Roller height adjusted manually 12 pcs. luminescent chalk Cutting capacity: Pos. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Pos. B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control system with: 7" color touchscreen Edit cutting cycles directly at the machine Programming options: - Cropping defects by marking - Operation with cut list consisting of 10 sizes, repeat option for each size and total quantity for each size 100 memory slots for cut lists Recognition system for the last two pieces to be cut and the following piece Electronic control of the sorting unit with No. 1 ejector kicker (ejector kicker optional) Technical specifications: Feed system motorized, brushless adjustment and toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm Carbide saw blade diameter 500 mm Motor power 7.5 kW Cutting speed per minute up to No. 100 Minimum bar length 550 mm Minimum bar width 40 mm Min. workpiece thickness 15 mm Upon request: ZA295 Additional loading table with double marking table ZA110 Outfeed table Ncodpox Da Tvefx Af Ijl ZA058 Carbide saw blade Ø 500 mm ZA296 Roller height electrically adjustable

Sąlyga: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, AUTOMATINĖ LENTŲ PJAUSTYMO STAKLĖ STROMAB MOD. TR600 – PAGAL CE STANDARTUS - Įvažiavimo ruloninis takas 2 m - Išvažiavimo ruloninis takas 2 m - 3 atmušos po 250 mm - CE standartai Njdpex Rrp Ssfx Af Iscl - Metai: 2004 - Su naudojimo ir priežiūros vadovu + CE sertifikatu

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 1 300 mm, pjovimo plotis (maks.): 1 300 mm, bendras svoris: 9 000 kg, ruošinio svoris (maks.): 8 000 kg, pjūklo pavara: 11 000 W, The OBS1300 bundle-cutting saw has been developed to optimize production in terms of time and process efficiency when formatting material to the desired length. The presented machine is available immediately; we invite you to inspection. Technical specifications: • Maximum bundle size (width/height): 1300 x 1300 millimeters • Minimum bundle size (width/height): 800 x 800 millimeters (hydraulic clamp operation limit; it is permissible to cut bundles with smaller dimensions) • Additional equipment for cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 millimeters • Maximum input bundle length: 6000 mm • Maximum bundle weight: 8,000 kilograms • Cutting accuracy: +/- 2 millimeters Njdexn Rt Ujpfx Af Iecl • Dedicated guide bar lubrication unit • GB TITANIUM cutting guide (rigid and massive, milled from a single piece of steel. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • WEG 11 kW guide drive motor • Fast measuring system with absolute encoder (retains position even after power loss) and positioning accuracy of 0.2 millimeters • Innovative strapping (banding) system with an intelligent binding position determination system based on programmed cutting lengths • System of three sets of hydraulic clamps • Hydraulic system built with PONAR components • Transverse loading conveyor introducing bundles onto the machine • Intelligent unloading system, transverse chain conveyor • System with two pairs of tilting (hydraulic) rollers allowing large offcuts to drop freely onto the conveyor • TA DRIVE gearmotors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touch operator panel • SIEMENS PLC controller (with remote access system) • SICK safety system and sensors Warranty: 12-month warranty. Service response time: 24 hours. Spare and consumable parts warehouse. With the machine, we provide: • User manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 600 mm, pjovimo aukštis (maks.): 160 mm, pjovimo plotis (maks.): 610 mm, galia: 0,01 kW (0,01 AG), Extreme robustness and maximum performance! The Legend_600 features a fully painted, thick, and reinforced steel construction. With a saw blade diameter of 600 mm, a power rating of 9.2 kW, and a speed of 2750 rpm, it is the ideal machine for anyone processing timber up to 150 mm thick and 610 mm wide. Nedpfx Afjfcdnlj Ijcl