Kapinė pjūklas pirkti naudotą (128)

Būklė: geras (naudotas), Gamybos metai: 1992, I am selling an automatic pneumatic crosscut saw GreCon Dimter 2004, year of manufacture 1992. Automatic infeed table / throughfeed system Outfeed table 3 ejectors on the left outfeed table. Total length: 15.50 m Pgedpfx Alot Ir Nqo Ior Optimization with automatic defect detection and automatic cutting pattern programming. Immediately available. Spare parts and documentation included.

Būklė: naujas, Gamybos metai: 2026, Parduodu KUSING SPS-500 požeminį skersinio pjovimo pjūklą. Šis tvirtas, visiškai elektrinis skersinio pjovimo pjūklas nereikalauja suspausto oro. Įrenginys puikiai tinka medienos apdirbimo įmonėms, žaliavinės medienos apdorojimui bei visoms gamybos sritims, kur reikia tiksliai pjauti ilgus, prizminius ruošinius, pvz., langų ar durų gamyboje. Dėl patogaus ir besi­žingsninio kėlimo greičio reguliavimo, net ir su silpnesniu varikliu vienu metu galima pjauti lentas ir prizmes. Pedpfxsx Ut H Tj Al Iegr Techniniai duomenys: Variklio galia: 3 / 4 / 5,5 / 7,5 kW Disko skersmuo: 500 mm Pjovimo greitis: 2–6 s Maksimali pjovimo aukštis: 150 mm Maksimali pjovimo plotis: 350 mm Pjovimo parametrai gali būti individualiai pritaikomi. Kaina apima pagrindinį stalą 2 + 2 m. Taip pat siūlomas platus prailginimo stalų konfigūracijų pasirinkimas, su skaitmeniniais arba rankiniais ribotuvais.

Būklė: naujas, Gamybos metai: 2026, Parduodu šią išilginio pjovimo skersinę pjūklą. Tinka lentų, brusų ar didelių brusų pjovimui. Pjovimo ilgis: 600 / 900 / 1200 mm Pgodpfsx Ut Iqox Al Ijr Pjovimo aukštis: 100 / 150 / 200 mm Variklio galia: 7,5 / 11 / 15 kW Disko skersmuo: 500 / 600 mm Mechaninis disko padavimas naudojant elektros variklį. Individualūs parametrai gali būti pritaikyti. Lentelės pagal specifikaciją.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, veikimo valandos: 1 234 h, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 7 000 mm, padavimo eiga Y ašimi: 600 mm, padavimo ilgis Z ašis: 250 mm, X ašies padavimo greitis: 80 m/min, bendras ilgis: 8 000 mm, bendras aukštis: 1 800 mm, bendras svoris: 2 000 kg, pjūklo disko skersmuo: 500 mm, disko skersmuo: 500 mm, stalo ilgis: 7 000 mm, Įranga: USB jungtis, Parduodama optimizavimo pjovimo staklė STROMAB MATRIX TR 500 labai geros techninės būklės, naudota nedideliame gamybos ceche, daugiausiai statybinei medienai pjauti. Naudota karkasinių namų surinkimui. Pgjdpjwp Rvhefx Al Isr Staklės visiškai tvarkingos, prižiūrėtos. Paruoštos darbui be papildomų investicijų. Parduodama su PVM sąskaita faktūra. VIETOJE GALIMA IŠBANDYTI KAINA derinama.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 9000 x 1400 x 1680 mm Weight: 1600 kg Total power requirement: 7.5 kW Automatic angle cross-cut saw RACS - Max. processing length: 2.5 m (can be customized to customer specifications) - Max. processing width: 200 mm - Min. processing width: 30 mm Pgsdov A E Ndepfx Al Ijr - Max. processing thickness: 100 mm (can be customized to customer specifications) - Saw blade dimensions: 405/120/30/3, 455/120/30/3 mm - Spindle motor: 7.5 kW / 400 V - Machine dimensions: 9000 mm x 1400 mm x 1680 mm - Machine weight: 1600 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Total power requirement 0 kW Automatic Angle Cross-cut Saw CT-600-6000 Psdpfxovz Eq Se Al Ijgr - Hydraulic under-table circular saw unit - Drive motor power 7.5 kW - Saw blade diameter Z=48x5 600 mm - Saw blade bore diameter 30 mm - Inclined work table Yes - Automatic table rotation -70° 0° +70° - Rotation speed from/to 0°/70° 3s - Positioning accuracy +/- 0.2° - Pneumatic workpiece hold-down clamps 2 pcs - Pneumatic side aligners 2 pcs - Safety cover over crosscut unit Yes - Cutting capacity at 0°: 160 x 310 mm, 80 x 390 mm - Cutting capacity at 45°: 160 x 220 mm, 80 x 270 mm - Cutting capacity at 70°: 160 x 90 mm, 80 x 130 mm - Minimum workpiece thickness 10 mm Connection data - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Compressed air consumption at 8 bar per cycle approx. 8 Nl - Extraction spigots Ø100 mm 2 pcs - Extraction spigot Ø160 mm 1 pc - Air velocity at extraction spigot center approx. 25-35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Driven by brushless servo motor - Feed system with precision rack and pinion and measurement via servo motors - Pneumatically liftable push point for passing over the workpiece in the subsequent cycle - Positioning tolerance +/- 0.4 mm Control: - Beckhoff industrial PC control with Windows CE operating system with touch screen - Data entry via keyboard, USB, or network - 5 optimization criteria: a) Maximum length, b) Minimal waste c) Part priority d) Volume e) Value - Processing individual part lists or combining orders - Graphical display of parts in process - Batch processing capability - 70 cutting lists with 21 dimensions each or one cutting list with 400 dimensions - Safety device - CE compliant - Complete safety enclosure included

Būklė: naujas, Gamybos metai: 2025, Matmenys (Ilgis/Plotis/Aukštis) 3000x1070x1200 mm Svoris 1150 kg Bendras galingumo poreikis 10 kW Optimizuojantis skersavimo pjūklas OPTIMAX 100 - Pjūklo variklis 7,5 kW - Sukimosi greitis 3200 aps./min. - Pavaros variklis 2,0 kW - Pavaros greitis bepakopis, iki maks. 80 m/min - Pjovimo dažnis iki 80 taktų/min. - Pjūklo disko Ø 455 mm - Pjūklo disko skylė 30 mm - Pjovimo aukštis 100 mm (pagal pjovimo diagramą) - Didelis pjovimo tikslumas ± 1 mm - Minimali ruošinio ilgis 300 mm - Mažiausias atstumas tarp žymėjimų 20 mm - Mažiausias ruošinio dydis 300 x 30 x 10 mm - PLC valdymas su liečiamuoju ekranu patogiam naudojimui + fiksuoto ilgio pjovimo režimas + sekvencinio pjovimo režimas (galima išsaugoti 10 skirtingų matmenų) + pjovimas pažymėtų kreidos linijų pagalba + fiksuoto ilgio ir pažymėtų kreidos linijų pjovimas - Įbėgimo ritininis stalas dešinėje 1200 mm - Išbėgimo stalas kairėje 1000 mm - Suslėgto oro jungtis 8 bar - CE atitiktis - Matmenys L=3000, P=1070, A=1200 mm - Svoris 1150 kg Pgsdpfxsvz Hzxj Al Ior

Būklė: naujas, Gamybos metai: 2025, Matmenys (Ilgis/Plotis/Aukštis): 4360x900x1450 mm Svoris: 560 kg Bendras galios poreikis: 10 kW Po stalu montuojamas skersavimo pjūklas CUTMAX 600 Psdsyk H Uhepfx Al Iogr - Pjovimo aukštis: 200 x 200 mm - Stalo matmenys: 1150 x 660 mm - Pjūklo diskas Ø 600 mm - Variklis: 10 kW / 400 V - Apsisukimų dažnis: 2400 aps./min - Pjovimo greitis iki 40 taktų/min - Suspausto oro jungtis: 8 bar - Ištraukimo antgalis Ø 120 mm - Dviejų rankų saugaus valdymo sistema - CE atitiktis - Įeina 1,5 m ritininė juosta kairėje ir dešinėje - Išmatavimai: I=1360, P=900, A=1450 mm - Svoris: 560 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H) 6400 x 1500 x 1780 mm Total power requirement: 19 kW Pgjdpfx Alewt Ua Ee Isr Weight: 1800 kg Optimizing Cross-Cut Saw WINTER QUICK 100 NC - Minimum workpiece length: 300 mm - Workpiece width min./max.: 20–220 mm - Workpiece thickness min./max.: 15–100 mm - Workpiece thickness tolerance: ±3 mm - Max. tolerance range (per side) of workpiece: 10 mm/m - Wood type: softwood or hardwood - Minimum cutting length: 80 mm - Maximum feed speed: 180 m/min - Cutting speed: 0.15–0.3 s - Total power: 19.0 kW - Saw motor: 7.5 kW - Feed servo motor: 5.5 kW - Saw stroke servo motor: 4.5 kW - Conveyor belt motor: 0.75 kW - Beam lifting motor: 0.37 kW - Extraction diameter: 2 × f120 mm - Table height: 900 mm - Overall dimensions: L=6400, W=1500, H=1780 mm - Weight: 1800 kg Standard configuration: - Infeed and marking station with servo drive - Infeed belt and saw stroke with individual servo-motor drive - 2.5 m outfeed belt with fluorescence sensor and ejector - Saw blade with integrated waste extraction device - User-friendly 10.1" TFT touchscreen - Air tank for stable pressure force - High-performance servo motor - Fully enclosed safety cover for low-noise and safe operation - Efficient production - Can replace 4–8 conventional manual cross-cut saws - Saves labor and space - Safe operation - Can be combined with a high-speed four-side planer to create an efficient, automatic production line.

Būklė: naujas, Gamybos metai: 2026, Pjovimo aukštis 125x220 mm Mašinos svoris apie 450 kg Variklio galia 5,5 kW WINTER apatinio stalo skersinė pjovimo staklės CUTMAX 500 Techniniai duomenys: - Pjovimo aukštis: 125 x 220 mm, 100 x 285 mm, 80 x 310 mm - Paduodamas stalas: 2000 mm - Išvedimo stalas: 2000 mm Pgsdpfx Aoyk Idwel Isr - 2 pneumatiniai atmušai - Pjūklo disko skersmuo: ø500 mm - Pjūvio storis: 4,2 mm - Pjūklo veleno skersmuo: ø35 mm - Pjūklo veleno greitis: 2800 aps./min - Viršutinio išsiurbimo antgalio skersmuo: ø100 mm - Apatinio išsiurbimo antgalio skersmuo: ø120 mm - Variklio galia: 5,5 kW - Suslėgto oro slėgis: 6,0 - 8,0 bar - Bendri matmenys (Ilg. x Pl. x Aukšt.): 4530x900x1300 mm - Darbinio stalo aukštis: 900 mm - Apsauginis gaubtas iš plexiglass - Saugus dviejų rankų valdymas - Svoris: 450 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 3940 x 850 x 1350 mm Weight: 410 kg Total power requirement: 5.5 kW Undertable crosscut saw CUTMAX 450 - Cutting height: 125 x 125 mm - 100 x 250 mm Psdpfx Alovz Eytj Ijgr - Table dimensions: 660 x 700 mm - Saw blade diameter: 450 mm - Motor: 5.5 kW / 400 V - Speed: 3,600 rpm - Cutting speed: up to 45 cycles/min - Compressed air connection: 8 bar - Extraction port: Ø 120 mm - Two-hand safety operation - CE conformity - Includes 1.5 m roller track left and right - Dimensions: L = 940, W = 850, H = 1350 mm - Weight: 410 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 10,000 x 2,500 x 1,600 mm Weight: 3,300 kg Total power requirement: 16.2 kW Automatic cross-cut saw with chain feed system AKS-6060 - Saw blade diameter: 600 mm - Infeed table length: 6 m - Maximum feed length: 6.1 m - Outfeed table length: 1.2 m - Cutting thickness: 10–140 mm - Cutting width: 30–300 mm - Maximum cutting capacity: 120 x 280 mm - Maximum thickness x width: 140 x 300 mm - Feed speed: 5–30 m/min - Saw blade bore: 30 mm - Spindle speed: 3,150 rpm - Servo drive motor power: 3.0 kW - Feed motor power: 2.2 kW - Cutting motor power: 11.0 kW - Total installed power: 16.2 kW - Voltage: 400 V, 50 Hz, 3-phase - Material clamping via cylinder, air pressure 0.5–0.7 MPa - Cutting tolerance: +/-1 mm Pedevz E Anopfx Al Isgr - Extraction port: 2 x 150 mm - Auxiliary relays: Honeywell - Electrical components: Schneider - PLC & touchscreen: Siemens - Machine size: 10 m x 2.5 m x 1.6 m (6 m model) - Machine weight: 3,300 kg OPTIONAL: - Waste wood conveyor: EUR 4,500,-

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 4500x1200x1200 mm Weight: 1500 kg Total Power Requirement: 8 kW Optimizing Cross-Cut Saw WS1 - Cutting Height Pos. A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Pos. B: 100x290, 80x315, 50x340, 30x355, 15x365 mm Pgedpfovz Hz Esx Al Ijr - Cutting speed up to 100 cycles/min. - Feed speed: 120 m/min - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3600 rpm - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm - Cutting accuracy: +/- 0.8 mm - Infeed roller conveyor right, 2000 mm with double marking station - Discharge table left, 1000 mm - Extraction port diameter: 200 mm - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7” color touch screen for simple operation + fixed length cross-cut mode + sequential cross-cut mode (10 different dimensions storable) + cross-cutting of marked chalk lines + fixed length and marked chalk line cross-cutting - CE conformity - Dimensions (L=4500, W=1200, H=1200 mm) - Weight: 1500 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (LxWxH): 0x0x0 mm Weight: 900 kg Total power requirement: 5 kW Automatic optimizing cross-cut saw with full optimization TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle time: 4 seconds - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 900 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V Pedsv A Hr Topfx Al Ijgr - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air speed at center of extraction port: approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Drive via brushless servo motor - Feed system with precision rack-and-pinion and measurement via servo motor - Pneumatic lift of the pusher at cycle end and overhead return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - Worktable inclination 8° - Positioning tolerance +/- 0.4 mm Control: - High-resolution 12'' touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on the machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 sequential sizes - 3 optimization options: maximum length, sequence, and workpiece sequence - 3 optimization options: volume, minimum waste, and priority - Standard USB and Ethernet interface - Including OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing material with variable lengths, with single or batch feeding. 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimum waste, and priority) - Including OPTI PLUS function for reading chalk markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cutting lists on PC €360.00 - Outfeed table €360.00/m

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1500 kg Total power requirement: 10.2 kW Fully optimizing automatic cross-cut saw TR-600 MATRIX-6000 - Motor drive power: 9.2 kW - Saw blade diameter: 600 x 30 mm, Z=60 - Cutting capacity according to cutting diagram - Cutting capacity: 150 x 365 mm - Cutting capacity: 130 x 440 mm - Cutting capacity: 100 x 530 mm - Cutting capacity: 60 x 580 mm - Cutting capacity: 30 x 610 mm - Cutting cycle: 6 seconds - Hydraulic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1500 kg Electrical connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x 100 mm diameter - Extraction capacity: 2400 m³/h - Air velocity at the center of the extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Max. pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and pinion and feedback via servo motor - Pneumatic lifting of the pusher at cycle end and upper return - Photocell for workpiece length measurement Pjdpfx Aljv A Htkj Iogr - Photocell for defect detection - Marking with fluorescent chalk - Working surface inclination 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cut lists directly at the machine control - Up to 1000 cut lists with 10 dimensions each - One list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimal waste, and priority) - Standard USB and Ethernet port - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing material of variable lengths, with single or bundle infeed - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings to ensure full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cut lists at PC €360.00 - Outfeed table €360.00/m

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 9400 x 1200 x 1600 mm Weight: 1400 kg Total power requirement: 8.5 kW Automatic Crosscut Saw ASKS-6045 - Saw blade diameter: 450 mm - Infeed table length: 6 m - Max. feed length: 6.1 m - Outfeed table length: 1.2 m - Cutting thickness: 10–120 mm - Cutting width: 30–200 mm - Max. cutting area: 120 x 150 mm - Max. thickness x width: 100 x 200 mm - Feed speed: 5–30 m/min - Saw shaft diameter: 30 mm - Cutter spindle speed: 3000 rpm - Servo drive motor output: 0.75 kW - Cutting motor output: 7.5 kW - Total power: 8.5 kW Psdpfxovz Elve Al Iogr - Voltage: 400 V, 50 Hz, 3 Phases - Material clamping with cylinder, air pressure 0.5–0.7 MPa - Cutting tolerance: +/-1 mm - Extraction connection: 2 x 150 mm - Interlocking relay: Honeywell - Electrical components: Schneider - PLC & touchscreen: Siemens - Machine dimensions: 9.4 m x 1.2 m x 1.6 m (6-m model) - Machine weight: 1400 kg Packing dimensions: 1 package: 1600 x 420 x 800 mm 1 package: 1300 x 1120 x 1990 mm 1 package: 2300 x 720 x 590 mm

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimized automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity according to cutting diagram - Cutting capacity 135 x 280 mm - Cutting capacity 125 x 295 mm - Cutting capacity 95 x 325 mm Pgsdov A Htdjpfx Al Ijr - Cutting capacity 80 x 340 mm - Cutting capacity 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - 8° inclined worktable - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min. - Drive by brushless servomotor - Feed system with precision rack and pinion, measurement by servomotor - Pneumatic pusher lift at end of cycle and upper return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - 8° inclined working surface - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Cutting list creation directly via machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard USB and Ethernet ports - Including OPTI function for automatic measuring of the workpiece to be cut. Optimal solution for processing material with variable lengths, for single or bundle feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, priority) - Including OPTI PLUS function for mark detection, enabling full optimization and removal of knots and defects - Marking with chalk Option: - Pneumatic side clamp €850.00 - Cutting list creation via PC €360.00 - Outfeed table €360.00/m

Būklė: naujas, Gamybos metai: 2025, Matmenys (ilgis/plotis/aukštis) 9400x1200x1600 mm Svoris 1400 kg Bendras energijos poreikis 12,5 kW Automatinė kapojimo pjūklas ASKS-6060 - Pjūklo disko skersmuo 600 mm - Pakrovimo stalo ilgis 6 m - Maksimali įėjimo ilgis 6,1 m - Išleidimo stalo ilgis 1,2 m - Pjūvio storis 10–140 mm - Pjūvio plotis 30–300 mm - Maks. pjovimo sritis 120 x 280 mm - Maks. storis x plotis 140 x 300 mm - Padvado greitis 5-30 m/min - Pjūklo disko skylė 30 mm - Frezavimo veleno apsukos 3150 aps./min - Servo pavaros variklio galia 1,0 kW - Pjovimo variklio galia 11,0 kW - Bendra galia 12,5 kW - Įtampa 400 V, 50 Hz, 3 fazės - Medžiagos prispaudimas cilindru, oro slėgis 0,5–0,7 MPa - Pjūvio tolerancija +/-1 mm - Nusiurbimo jungtis 2 x 150 mm - Tarpinis relė Honeywell - Elektriniai komponentai Schneider - PLC & liečiamas ekranas Siemens - Staklių matmenys 9,4 m x 1,2 m x 1,6 m (6 m modelis) - Staklių svoris 1400 kg Pgedjvz Ekropfx Al Ier Pakuotės matmenys: 1 pakas 1600*420*800 mm 1 pakas 1300*1120*1990 mm 1 pakas 2300*720*590 mm

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 9850 x 2300 x 1770 mm Weight: 3480 kg Total power requirement: 14 kW Automatic cross-cut saw AK-500 - Cutting length: min.-max. 5–4050 mm - Material trim: 5 mm - Cutting height: max. 200 mm - Cutting width: max. 500 mm - Saw blade diameter: Ø 550 mm - Saw blade thickness: 5.2 mm - Number of saw teeth: 98 pcs - Saw blade bore: 30 mm - Saw spindle speed: 2800 rpm - Extraction port diameter: 100 mm - Working height: 900 mm Pjdpfx Alevz E Ahe Ijgr - Main motor power: 11 kW - Servo motor: 0.75 kW - Offcut conveyor: 0.75 kW - Roller conveyors: (R) 0.75 kW + (L) 0.75 kW - Total power: 14 kW, 400 V, 50 Hz (63A) - Extra thick housing: 3.8 mm (vibration protection) - Operating air pressure: 6–8 bar - Including upper hold-down device for cutting - Including two-hand safety control (CE-compliant) - Including support arms for material alignment - Including control system with memory for multiple lengths - Including remnant belt conveyor with integrated mechanism - Including servo-driven push arm for precise material positioning - Installation dimensions: L = 9850 mm, W = 2300 mm, H = 1770 mm - Total weight: 3480 kg

Būklė: geras (naudotas), Gamybos metai: 1992, fully automatic programmable cross-cutting with additional marking detection for defect removal via LUT system infeed conveyor 6 m 6 ejection stations, total length 12 m Pgedpfjl H E Taox Al Isr The infeed belt is currently not running, most likely due to a frequency converter issue

Būklė: naudotas, Gamybos metai: 1989, Pjovimo aukštis 90° kampu: 125 mm Pjovimo plotis 90° kampu: 600 mm Volelinės juostos plotis: 600 mm Pjūklo disko skersmuo: Pervežama: taip Staklių ilgis: 3100 mm Staklių gylis: 1900 mm Staklių aukštis: 1750 mm Pjdpfxoyxgazo Al Isgr Svoris: apie 650 kg

Būklė: naudotas, Gamybos metai: 1992, pjūklo disko skersmuo: 550 mm, bendras svoris: 1 500 kg, galia: 13 kW (17,68 AG), No. 3260 CNC Cross-Cut System Paul 14KE Used, year of construction 1992 (completely overhauled by manufacturer in 2012) According to our customer / the previous owner, the machine is fully operational and can be inspected and tested on site. Saw blade diameter: 550 mm Rotation speed: 3,500 rpm Bore: 120 mm Connected load: 13 kW Workpiece length: 600 - 7,000 mm Maximum workpiece width: 380 mm Maximum workpiece thickness: 100 mm Minimum wood cross-section: 12 x 40 mm Maximum wood cross-section: 45 x 380 / 100 x 200 mm 6 powered lower rollers 6 non-powered upper rollers CNC control: MAXI x.3 Complete with infeed, outfeed belt, control cabinet, and controller Technical documentation included Weight: approx. 1,500 kg Sale on behalf of customer, ex site near 99091 Erfurt, without dismantling, transport, or installation Dismantling, loading, and transport by us available as an option Errors in description and pricing excepted To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended Sale is made in "as is" condition Psdpfx Aeyl R Uuol Iegr Technical specifications, condition description, year of construction, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, all warranty is excluded; the following applies: "sold as seen" Photos and videos are for illustration purposes and do not correspond to actual scope of delivery Terms of payment: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Būklė: geras (naudotas), Code: 0355 Brand: AVOLA - GERMANY Model: GAMA 65 K - CE Standard Cutting centre for timber joinery, beams, timber roofs, sawmills, balconies, garden furniture and various applications – complies with CE Standard. Technical Data: - Lower cross-cut saw with rotary table and tilting blade - Carbide-tipped blade (diameter: 650 mm, bore: 30 mm) - Pneumatically operated safety guard - Motor: 10 kW Podey A S Dtopfx Al Iegr - Motor speed: 3000 rpm - Pneumatic clamping cylinders - Pneumatic cross-cut unit with two-hand control - Electric blade tilt adjustment 90–30° with flat digital display (range: 5–175°) - Cutting height at 90°: 245 mm - Cutting height at 45°: 164 mm - Cutting height at 30°: 113 mm - Laser cutting guide - Table dimensions: 1500 x 1500 mm - Working table height: 1000 mm - Forklift handling brackets - Right-side roller conveyor: 3000 x 600 mm – Support guide 5000 mm - Left-side roller conveyor: 3000 x 600 mm – Support guide 5000 mm - Overall dimensions (assembled): 10850 x 2000 x 1700 mm (H) - Overall dimensions for transport: 2600 x 2000 x 1700 mm + stacked roller conveyors: 5000 x 1000 x 2000 mm (H)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 700 mm, pjūklo pavara: 7 500 W, darbinis slėgis: 6 juosta, disko skersmuo: 700 mm, Echipament industrial de tâmplărie: Masă circulară de tăiere de dimensiuni mari. Motor puternic: 7,5 kW, 380 V. Avans şi retur pânză acţionate pneumatic. Reglarea înălţimii este electrică. Pgsdpfx Alsv Ic Iuo Ijr Diametrul pânzei: 700 mm.

Būklė: naujas, Description: - Crosscut and mitre circular saw with a maximum cutting height of 170 mm Pjdpfjvwf N Tsx Al Ijgr - Machine can be set for mitre cuts on 2 planes - Robust cast iron construction - Precision linear ball bearing guidance of the tool carriage on hardened and ground steel shafts - Manual saw feed - Quick mitre adjustment up to 25° horizontally and up to 45° vertically - Adjustable fixed stops at 90° and 45° - Lower saw blade guard can be connected to extraction unit Scope of delivery: 1 x Graule crosscut and mitre circular saw type ZS 170 N incl. additional price for 3 kW 400 Volt motor Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Mitre range vertical: 90°-45° (tilts to the left) - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg