Chopsaw

STROMAB CT-600-6000

Sąlyga: naujas, Gamybos metai: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical specifications of the saw unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400/50 Hz. TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system with brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for bundle weight up to 80 kg Maximum push feed system speed: 90 m/min Pneumatic lift of pusher at the end of the cutting cycle and overhead return. Data input management: 12-inch TOUCH SCREEN controller (800x600 Pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit cutting cycle (pattern) and enter directly at the controller Transfer cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of the stock length Partial optimization without measuring the panel length Cutting cycle with 3 optimization options (maximum length, sequence, and board order) 1000 cutting lists with 11 sizes each, or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length measurement via photocell Cutting cycle: with 6 optimization criteria (longest length, sequence, board order, volume, minimal waste, and priority length) "OPTI PLUS" package: overall optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during timber mapping Kjdpfxohw Ng Ij Af Iedg Marking with fluorescent chalks (Note Ð Only available in combination with ZA250) Pneumatic side clamping device

Sąlyga: naujas, Gamybos metai: 2025, New SALVACUT 5000 Optimizing Saw by SALVAMAC Kdodpjn E Sl Rsfx Af Ieg Innovative high-speed optimizing saw for defect detection and removal in wood, equipped with dual drive via upper rollers and a lower feed belt with independent control. Developed from an idea by Salvador Christian.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, TECHNICAL SPECIFICATIONS: Ksdpfx Aswp Az Asf Ijdg - Cutting width: 250 mm - Cutting height: 120 mm - Capacity: up to 8,150 linear meters / 8 hours - Sorting table with 4 ejectors - Electronics: Controller with color touch display “MITSUBISHI” - Functions: full optimization for 30 dimensions in two quality classes - Creation of cutting programs for various customers - Cutting at marking point (fluorescent chalk marking) - Trim cutting (beginning and end of incoming material) - Batch cutting (multiple elements at once) - Counters: meters, total, shift, operator, monthly - Cutting accuracy: ±0.2 mm - Motor: 5.5 kW (saw Ø500 – 140 teeth) - Input material width range: 12 - 250 mm, max width/height (250 / 50 mm) - Input material height range: 12 - 120 mm, max height/width (120 / 130 mm) - Input material length: up to 4,200 mm - Lubrication: Oil-based central lubrication system - Output automation: Connection for angled conveyor and sorting table

Sąlyga: naudotas, Freza cuțit multiface Denumire echipament: Mașină de profilat pe 4 fețe Tip: Hypermac LMC - 826 Producător: LMC Leadermac Kdodpfx Ajwph Sajf Ieg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 80 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Stromag CT 600 F, pjūklo disko skersmuo: 600 mm, pjovimo aukštis (maks.): 410 mm, padavimo ilgis X ašis: 7 000 mm, X ašies padavimo greitis: 90 m/min, pjovimo plotis (maks.): 250 mm, bendras ilgis: 12 000 mm, bendras svoris: 2 700 kg, įvesties srovės tipas: trifazis, ruošinio svoris (maks.): 80 kg, pjovimo ilgis (maks.): 6 600 mm, oro poreikis: 350 m³/val, įėjimo įtampa: 400 V, ištraukimo jungties skersmuo: 110 mm, ašies variklio galia: 7 500 W, pagrindinis pjūklo diskas skersmuo: 600 mm, pjūklo disko greitis: 2 560 aps./min, darbinis slėgis: 6 juosta, Mažai naudotas. Yra ir frezavimo stotis. Kodsxcihgspfx Af Ijdg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (LxWxH): 0x0x0 mm Weight: 900 kg Total power requirement: 5 kW Automatic optimizing cross-cut saw with full optimization TR-450 MATRIX-6000 Kjdpfev A Hr Tex Af Iodg - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle time: 4 seconds - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 900 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air speed at center of extraction port: approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Drive via brushless servo motor - Feed system with precision rack-and-pinion and measurement via servo motor - Pneumatic lift of the pusher at cycle end and overhead return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - Worktable inclination 8° - Positioning tolerance +/- 0.4 mm Control: - High-resolution 12'' touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on the machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 sequential sizes - 3 optimization options: maximum length, sequence, and workpiece sequence - 3 optimization options: volume, minimum waste, and priority - Standard USB and Ethernet interface - Including OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing material with variable lengths, with single or batch feeding. 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimum waste, and priority) - Including OPTI PLUS function for reading chalk markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cutting lists on PC €360.00 - Outfeed table €360.00/m

Sąlyga: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Einseitiger Scanner für Sortierung oder Optimierung: Breite: 30–200 mm Höhe: 13–50 mm Länge: 2–6 m Erkennung möglich für: Äste, Holzstruktur, Risse, Endrisse, Farbabweichungen etc. Scan-Geschwindigkeit: bis zu 200 m/min Kdodpfx Afsv Tlgde Iog Verschiedene Profiltypen scannbar