Plastiko malūnai pirkti naudotą (115)

Gamybos metai: 2025, Sąlyga: naujas, Slow-speed beside-the-press granulator Rotor diameter (mm): 180 Rotor width (mm): 430 Rotor speed (rpm): 150 Drive (kW): 4 Number of rotor knives: 45 Number of stator knives: 2 Screen perforation (mm): >5 Weight approx. (kg): 250 The slow-speed beside-the-press granulators of the GSL series are mainly used in injection moulding and blow moulding applications for inline granulation of sprues and defective parts. Thanks to various hopper and extraction systems, these machines can be flexibly integrated into existing installations. GSL 180: For the granulation of sprues from injection moulding and blow moulding processes Highlights of the GSL series: - Low noise emission thanks to the low rotor speed, inclined cutting geometry, and multi-layer sandwich design soundproofed hopper - Powerful and efficient drive thanks to branded gear units - Easy maintenance, cleaning, and knife changing The slow-speed beside-the-press granulators of the GSL 180 series are equipped with a closed rotor with a diameter of 180 mm. The machines are available in working widths from 120 mm up to 430 mm. The rotor consists of individual discs connected via an oversized drive shaft directly to the spur gear. This allows for efficient and low-maintenance power transmission. The material to be granulated can be fed manually, by conveyor belt, or by robot via a generously sized soundproofed hopper in sandwich design. As standard, the granulator is mounted on a low base frame with swivel casters. Discharge is through a suction tray located beneath the screen, equipped with a pipe connection for a vacuum conveyor. Applications Dcjdpfxji Hpfds Admer The slow-speed beside-the-press granulators of the GSL 180 series have been specially developed for the granulation of sprues from injection moulding and blow moulding processes. The easy accessibility enables quick colour and material changes. The low rotor speed also allows for the processing of both soft and hard materials, ensuring high material quality with minimal fines.

Gamybos metai: 2012, Sąlyga: paruoštas naudoti (naudotas), Rotor diameter: 450 mm, cutting chamber opening (X/Y): 900 mm / 540 mm, rotor knives: 3 x 32, stator knives: stationary, drive power: 37 kW, throughput: 900 kg/h, machine dimensions (X/Y/Z): approx. 1600 mm / 1700 mm / 1500 mm. Documentation available. Dcjdpfx Adjucw S Semer

Sąlyga: naudotas, Cutting screen, shredder screen, screen basket, screen for chipper, shredding plant, single-shaft shredder, shredder, cutting mill, size reduction machine - Perforation: 65 x 65 mm - Mounting holes: Ø 75/30 mm - With support ribs - Drawing available in images Dodpfxsb Hiyls Admscr - Dimensions: 1600/1844/H620 mm - Weight: 696 kg

Gamybos metai: 1988, Sąlyga: labai geros būklės (naudotas), 3 units of mills Manufacturer: VEB Type: GS 300/200 Year of manufacture: 1987, 1988, 1988 Dcsdpfoutm Npex Admor Power: 7.5 kW

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras svoris: 2 000 kg, rotoriaus skersmuo: 400 mm, peilių skaičius: 6, rotoriaus ilgis: 600 mm, rotoriaus plotis: 400 mm, galia: 22 kW (29,91 AG), pildymo angos plotis: 490 mm, pildymo angos ilgis: 590 mm, garantijos trukmė: 12 mėnesiai, įėjimo įtampa: 400 V, The compact inline granulators of the GST series are suitable for use in injection molding and blow molding operations. They are ideal for recycling, for example, voluminous components such as bottles, canisters, crates, sprues, and injection-molded parts. Thanks to the low feed height, the machines can be easily loaded by hand or using a small conveyor belt. Low noise emissions and a small footprint make the GST series the perfect solution for inline size reduction. All GST series machines feature a compact, sound-insulated housing and a sound-dampened hopper. The feed hopper can be opened and closed using a gas spring damper. These compact granulators are available with two rotor diameters (250 mm, 400 mm) and rotor widths ranging from 300 to 1000 mm. The smaller models are equipped with an open F-rotor, while the larger machines feature the heavier S-rotor. The contoured back wall of the cutting chamber ensures aggressive material intake and prevents material jams. Thanks to the modular design of the granulator, it can be easily expanded with additional options, such as replaceable wear plates. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine to reduce downtime during maintenance. The adjustment gauge is included in the delivery. The control cabinet is mounted externally on the noise protection enclosure, and all wiring is integrated within the system. Dcsdsvgncuspfx Admer Rotor diameter (mm): 400 Rotor width (mm): 600 Drive (kW): 22 Rotor knives (rows): 3 x 2 Stator knives (rows): 2 Screen perforation (mm): > 6 Cutting chamber (mm x mm): 400 x 600 Weight (approx. kg): 2000

Gamybos metai: 1977, Sąlyga: paruoštas naudoti (naudotas), A heavy-duty granulator by Rapid is available. Only unreinforced polyolefins have been processed with this mill, so it has not been subjected to heavy loads. Feed opening X/Y: 1050mm/600mm, motor power: 75kW, rotor knives: 2x5, stator knives: 2, screen: 8mm, throughput: material-dependent. Machine dimensions X/Y/Z: approx. 2750mm/2100mm/2850mm, machine weight: approx. 4550kg. Documentation available. On-site inspection possible. Dedpfxovwcxfs Admscr

Gamybos metai: 2011, Sąlyga: geras (naudotas), Shredding plant, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill Dcedeh Di H Depfx Admjr -Shredding plant: fully made of stainless steel, suitable for frozen meat or other materials -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting blades: 10 pieces -Dimensions of cutting blades: 250 mm -Feed hopper: 500 x 895 x H480 mm -Dimensions: 880/1390/H2060 mm -Weight: 640 kg

Gamybos metai: 2006, Sąlyga: labai geros būklės (naudotas), 8 units of screw conveyor mills PRM Dcodpfehry Tiox Admor Type: MGK 400/175 Year of manufacture: 1992, 1994 Available: 8 units

Sąlyga: naujas, Gamybos metai: 2024, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been combined, with particular attention paid to weight, handling, and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and 600 mm. The curved back wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, rotor and stator knives are adjustable outside the machine, thereby reducing downtime during maintenance. The strongly tangential, curved back wall of the cutting chamber, in combination with the aggressively open rotor design, ensures reliable material intake and minimizes the risk of blockages. These compact granulators are suitable for use in blow-molding operations. They are ideal for recycling large-volume parts such as bottles, canisters, and crates. Thanks to the low feed height, the machines can be loaded easily by hand or via a small conveyor belt. Low noise emissions and a small footprint make the granulator a perfect solution for inline size reduction. 98T8Mrx Optional back wall with raised stator knife, M Version: The infeed method with a raised stator knife is better suited for thicker-walled and more compact parts, such as injection-molded parts, profiles, plates, etc. The cutting geometry and the reduced rotor aggressiveness result in high-quality regrind, regardless of the material type or form, such as injection-molded parts, profiles, plates, etc. Control system and control cabinet: The integrated control system and operating console not only comply with all current safety regulations but can also be adapted to specific requirements. Additionally, peripheral devices such as feeding conveyors, metal detection, and discharge systems can be seamlessly integrated into the machine’s control system. For improved efficiency, an optional intelligent energy-saving function is available, which reduces power consumption during idle times and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW, and 400 cyclone Rotor diameter (mm): 250 Rotor width (mm): 450 Dcodpfx Ajt Aagaedmsr Drive power (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 700 Feed opening (mm): 380 x 450 Feed opening, M version option (mm): 295 x 450

Gamybos metai: 2022, Sąlyga: paruoštas naudoti (naudotas), A Getecha plastic granulator is available. Rotor diameter: 300 mm, cutting width min./max.: 400 mm / 1260 mm, number of rotor knives: 5, motor power: 5.5 kW. Includes an enlarged control cabinet. Completely overhauled with less than 100 operating hours. Documentation available. Dodpfxjucw S Eo Admjcr

Sąlyga: labai geros būklės (naudotas), Granulator, auxiliary mill, shredder, plastic shredder, granulating mill, rotor mill, recycling technology. Dsdpfx Aewg Axvsdmjcr - Condition: Mill is equipped with a new set of knives, without control unit and without screen - Manufacturer: RAPID, auxiliary granulator - Model: 650-M - Drive motor: 37 kW - Number of cutting knives: 10 pcs - Number of counter knives: 2 pcs - Feed opening: 600 x 300 mm - Rotor width: 610 mm - Rotor diameter: 300 mm - Quantity: 2 granulators available - Price: per unit - Dimensions: 1385/1200/H2170 mm - Weight: 1208 kg

Gamybos metai: 2025, veikimo valandos: 1 h, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Optimization of an established concept. Dsdpfsum Rnvjx Admscr Shredding of large-volume blow-molded parts as well as start and end pieces A compact redesign combines the best features of the proven GST and GSC series, placing particular emphasis on weight, handling, and energy efficiency. These compact granulators are fully soundproofed, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine to minimize downtime during maintenance. The strongly tangential, curved back wall of the cutting chamber, in conjunction with the aggressive open rotor design, ensures reliable material intake and minimizes the risk of blockages. These compact granulators are suitable for use in blow molding operations. They are ideal for recycling, e.g., voluminous parts such as bottles, canisters, and crates. Thanks to the low feed height, the machines can be easily loaded by hand or with a small conveyor. Low noise emissions and minimal space requirements make the granulator a perfect solution for in-line size reduction. Optional rear wall with elevated stator knife, M version: The feed method with a higher stator knife is better suited for thicker-walled and more compact parts, such as injection molded components, profiles, and sheets. Due to the cutting geometry and the less aggressive rotor, top-quality regrind is achieved regardless of material type or shape, such as injection-molded parts, profiles, or panels. Control and switch cabinet: The integrated control and operating console not only comply with all applicable safety regulations, but can also be customized to specific requirements. Additionally, peripherals such as feed conveyors, metal detection, and discharge systems can be seamlessly integrated into the machine’s control system. For improved efficiency, an optional intelligent power-saving feature is available, which reduces energy consumption during idle times and can automatically start and stop the system based on the status of upstream machinery. Standard configuration with blower, power consumption 0.75 kW and 400 mm cyclone Rotor diameter (mm): 250 Rotor width (mm): 450 Drive (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 700 Feed opening (mm): 380 x 450 Feed opening (M version, optional) (mm): 295 x 450

Gamybos metai: 2015, Sąlyga: paruoštas naudoti (naudotas), A total of seven identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260 mm, motor power: 7.5 kW, throughput: 150 kg–220 kg/h, feed hopper opening: 350 mm x 300 mm, collection bin capacity: 30 liters, discharge hopper capacity: 15 liters. Machine dimensions (L/W/H): approx. 1200 mm x 800 mm x 1750 mm, weight: approx. 650 kg. Documentation is available. On-site inspection possible. Dcedpfx Aswxd Upodmor

Gamybos metai: 2025, Sąlyga: naujas, The compact mills of the G and H series are primarily designed for use in injection molding and blow molding applications for recycling voluminous products such as bottles, canisters, and crates, as well as for flush-molded blow molding and injection sprues. Their low height makes them ideal for manual feeding of such parts. The low noise level and small footprint make them perfectly suited for inline recycling operations. Advantages: - Compact design, minimal space requirements - All blades are set outside the machine using a jig to reduce downtime during maintenance - Aggressive infeed enabled by the curved rear wall of the cutting chamber - Large screen area for high throughput rates - Advanced V-Cut technology produces high-quality regrind while reducing energy consumption and noise emissions Technical specifications: - Rotor diameter (mm): 250 - Rotor width (mm): 450 - Drive capacity (HP): 15 - Rotor knives (pcs): 3 x 1 - Stator knives (rows): 2 - Hopper opening (mm): 340 x 450 - Total length (mm): 1207 - Machine length (mm): 860 - Total width (mm): 1020 Dcedep N Drxopfx Admor - Machine width (mm): 684 - Height (mm): 1712

Gamybos metai: 2025, Sąlyga: naujas, Size reduction of large-volume blow-molded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been combined, with particular emphasis on weight, handling, and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. As with all ZERMA granulators, rotor and stator knives are adjustable outside of the machine, thus reducing downtime during maintenance. The strongly tangential, curved rear wall of the cutting chamber in combination with the aggressive open rotor design ensures reliable material intake and minimizes the risk of blockages. These compact granulators are suitable for use in blow molding operations. They are ideal for recycling, e.g., voluminous items such as bottles, canisters, and crates. Thanks to the low feeding height, the machines can be easily loaded manually or with a small conveyor belt. The low noise emissions and small footprint make the granulator a perfect solution for in-line size reduction. Optional rear wall with elevated stator knife, M Version: Djdpfjp Sr Anjx Admscr The feed method with an elevated stator knife is better suited for thicker-walled and more compact parts, such as injection molded parts, profiles, sheets, etc. Due to the cutting geometry and the less aggressive rotor, high-quality regrind is achieved regardless of the material type or shape, such as injection molded parts, profiles, sheets, etc. Control system and control cabinet: The integrated control system and operator console not only comply with all relevant safety regulations, but can also be adapted to specific requirements. In addition, peripheral devices such as feed conveyors, metal detection, and discharge systems can be seamlessly integrated into the machine’s control system. For enhanced efficiency, an optional intelligent energy saving function is available, which reduces power consumption during idle periods and can automatically start and stop the system based on the upstream machine status. Standard configuration with blower, power consumption 0.75 kW and 400 cyclone Rotor diameter (mm): 250 Rotor width (mm): 300 Drive (kW): 7.5 Number of rotor knives: 3 x 1 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 950 Feed opening (mm): 380 x 300 Feed opening option for M Version (mm): 295 x 300

Gamybos metai: 2025, Sąlyga: naujas, Size reduction of large-volume blow-molded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been integrated, with particular focus on weight, handling, and energy efficiency. These compact granulators are fully soundproofed, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, rotor and stator knives can be adjusted outside the machine to minimize downtime during maintenance. The strongly tangential, curved rear wall of the cutting chamber combined with the aggressive open rotor design ensures reliable material intake and minimizes the risk of blockages. The compact granulators are suitable for use in blow molding operations. They are ideal for recycling large parts such as bottles, canisters, crates, etc. Thanks to the low feed height, the machines can be easily loaded by hand or with a small conveyor belt. Low noise emissions and minimal space requirements make the granulator the perfect solution for inline size reduction. Dcsdpfsp Sr Iasx Admor Optional rear wall with higher stator knife (M version): The feed method with a raised stator knife is better suited for thicker-walled and more compact parts such as injection molded components, profiles, sheets, etc. Due to the cutting geometry and the less aggressive rotor design, high-quality regrind is produced regardless of material type or shape, including injection molded parts, profiles, sheets, etc. Control and switch cabinet: The integrated control system and operation console not only comply with all current safety regulations but can also be adapted to specific requirements. Additionally, peripheral devices such as feed conveyors, metal detection, and discharge systems can be seamlessly integrated into the machine’s control system. An optional intelligent energy-saving function is also available to reduce power consumption during idle times and can automatically start or stop the system based on the status of upstream machines, improving efficiency. Standard configuration with blower, power consumption 0.75 kW, and 400 cyclone Rotor diameter (mm): 250 Rotor width (mm): 600 Drive (kW): 11 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): >6 Weight approx. (kg): 1450 Feed opening (mm): 380 x 600 Feed opening, M version option (mm): 295 x 600

Gamybos metai: 2025, Sąlyga: naujas, The compact mills of the G and H series are primarily designed for use in injection molding and blow molding applications for the recycling of bulky products such as bottles, canisters, and crates, as well as for the direct processing of blow molding and injection molding sprues. Their low height makes them ideally suited for the manual feeding of such parts. The low noise level and compact footprint make them perfect for inline recycling operations. Advantages: - Compact design, minimal space requirements - All knives are adjusted outside the machine in a dedicated fixture to reduce maintenance-related downtime - Aggressive infeed thanks to the curved rear wall of the cutting chamber - Large screen area for high throughput rates - Modern V-cut technology delivers high-quality regrind while reducing both energy consumption and noise emission Rotor diameter (mm): 250 Rotor width (mm): 600 Drive power (HP): 20 Rotor knives (pcs): 3 x 1 Stator knives (rows): 2 Hopper opening (mm): 340 x 600 Total length (mm): 1348 Machine length (mm): 1000 Total width (mm): 1165 Dcsdpjp N Dtrefx Admor Machine width (mm): 834 Height (mm): 1712

Gamybos metai: 2025, Sąlyga: naujas, The compact mills of the G and H series are primarily designed for use in injection molding and blow molding applications for recycling bulky products such as bottles, canisters, and crates, as well as for processing flush blow-molded and injection sprues. Their low overall height makes them ideal for manual feeding of such parts. The low noise level and small footprint make them perfect for in-line recycling operations. Advantages: - Compact design, minimal space requirement - All knives are adjusted outside the machine using a fixture to reduce maintenance downtime - Aggressive intake due to the curved rear wall of the cutting chamber - Large screen area for high throughput rates - Advanced V-cut technology produces high-quality regrind while reducing power consumption and noise emissions Technical Data: - Rotor diameter (mm): 250 Dsdpfx Aep N Dqtodmscr - Rotor width (mm): 300 - Drive capacity (HP): 10 - Rotor knives (pcs): 3 x 1 - Stator knives (rows): 2 - Feed opening (mm): 340 x 300 - Total length (mm): 1207 - Machine length (mm): 860 - Total width (mm): 870 - Machine width (mm): 440 - Height (mm): 1712

Gamybos metai: 2025, Sąlyga: naujas, Direct drive via gear motor No adjustment work required thanks to special rotor knives Easy accessibility for maintenance and cleaning tasks Low noise emission and reduced dust in ground material due to slow rotor speed Universally applicable in combination with numerous options Rotor diameter (mm): 300 Rotor width (mm): 800 Rotor speed (rpm): 150 Dsdjn Hqv Dspfx Admecr Drive power (kW): 18.5 Number of rotor knives: 66 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 1100

Gamybos metai: 2025, Sąlyga: naujas, APPLICATIONS The S Series granulators are mainly used as large central granulators in in-house recycling applications for processing large, thick-walled parts in a single stage or as a secondary granulator after a shredder to achieve higher output and throughput rates. GENERAL DESCRIPTION The high-performance mills of the S Series offer working widths from 600 to 1000 mm with a rotor diameter of 400 and 560 mm. The fully welded, heavy-duty steel construction is designed to withstand the most demanding and versatile applications. Rotor bearings, knife holders, and rotor shafts are oversized. The standard V-cut technology ensures a high-quality regrind with a very low fines content in the discharged material. The removable third stator knife (optional) serves as a deflector wedge and allows for quick adaptation of the machine to various application scenarios. Further standard features include easily adjustable knives from the outside, reducing the risk of contamination. S SERIES – HIGH-PERFORMANCE GRANULATOR ADVANTAGES: Dcedop N D Sbjpfx Admsr » The easily removable deflector wedge acts as a third stator knife and allows the aggressiveness of the rotor at the first cutting point to be adjusted. » The V-cut technology produces a high-quality regrind while simultaneously reducing energy consumption and noise. » The heavy-duty bearings are separated from the cutting chamber to prevent lubricant ingress and bearing failure, thus avoiding material contamination. » Both rotor and stator knives are adjusted from the outside. Rotor diameter (mm): 560 Rotor width (mm): 700 Drive capacity (HP): 75 Rotor knives (pcs): 5 x 2 Stator knife rows: 2 + 1 Feed hopper opening (mm): 700 x 650 Overall length (mm): 2300 Machine length (mm): 2200 Overall width (mm): 1600 Machine width (mm): 1060 Height (mm): 3509

Gamybos metai: 2025, Sąlyga: naujas, APPLICATIONS The S-Series granulators are primarily used as large central granulators in in-house recycling applications for processing large, thick-walled parts in a single stage, or as a secondary granulator after a shredder to achieve higher outputs and throughput rates. GENERAL DESCRIPTION The S-Series high-performance granulators are available in widths from 600 to 1000 mm with rotor diameters of 400 and 560 mm. The fully welded heavy-duty steel construction is designed for durability in the most demanding and universal applications. Rotor bearings, knife holders, and rotor shafts are oversized. The standard V-cut technology ensures high-quality regrind with a very low percentage of fines in the output material. The removable third stator knife (optional) acts as a deflector and enables rapid machine adjustment for different application scenarios. Other standard equipment includes easily adjustable knives from the outside, reducing the risk of contamination. S-SERIES – HEAVY-DUTY GRANULATOR ADVANTAGES: Dcsdsp N D N Sopfx Admor » The easily removable deflector acts as a third stator knife and allows adjustment of rotor aggressiveness at the first cutting point. » The V-cut technology produces high-quality regrind while reducing energy consumption and noise levels. » The heavy-duty bearings are separated from the cutting chamber to prevent lubricant ingress and bearing failure, avoiding material contamination. » Both rotor and stator knives are adjusted externally. Rotor diameter (mm): 400 Rotor width (mm): 600 Drive capacity (HP): 50 Rotor knives (pcs): 5 x 2 Stator knives (rows): 2 + 1 Feed hopper opening (mm): 630 x 600 Overall length (mm): 1950 Machine length (mm): 1876 Overall width (mm): 1359 Machine width (mm): 1000 Height (mm): 3040

Gamybos metai: 2025, Sąlyga: naujas, The compact mills of the G and H series are primarily designed for use in injection molding and blow molding applications to recycle large-volume products such as bottles, canisters, and crates, as well as flash from blow molding and injection molding sprues. Their low height makes them ideal for manual feeding of such parts. The low noise level and small footprint make them perfect for inline recycling operations. Advantages: - Compact design, small footprint - All knives are set outside the machine in a fixture to reduce maintenance downtime - Aggressive feeding thanks to the curved rear wall of the cutting chamber - Large screen area for high throughput rates - Modern V-cut technology produces high-quality regrind while reducing energy consumption and noise emissions Technical specifications: Rotor diameter (mm): 400 Rotor width (mm): 1000 Dcsdjp N Dv Hepfx Admjr Drive capacity (HP): 40 Rotor knives (pcs): 3(5) x 1 Stator knives (rows): 2 Hopper opening (mm): 490 x 990 Overall length (mm): 1348 Machine length (mm): 1120 Overall width (mm): 1577 Machine width (mm): 1216 Height (mm): 1914

Gamybos metai: 2025, Sąlyga: naujas, APPLICATIONS The S-Series granulators are primarily used as large central granulators for in-house recycling applications to process large, thick-walled parts in a single stage, or as a secondary granulator following a shredder to achieve higher throughput rates. GENERAL DESCRIPTION The high-performance granulators of the S-Series are available in widths from 600 to 1000 mm with rotor diameters of 400 and 560 mm. The fully welded, heavy-duty steel construction is engineered for durability to handle the most demanding and versatile applications. Rotor bearings, knife holders, and the rotor shaft are generously dimensioned for maximum reliability. The standard V-cut technology ensures a high-quality regrind with a very low proportion of fines in the output material. The removable third stator knife (optional) functions as a deflector wedge and allows for rapid adaptation of the machine to different application scenarios. Other standard features include easily adjustable knives from the outside, reducing the risk of contamination. Dedpfop N D Tysx Admjcr S-SERIES – HIGH-PERFORMANCE GRANULATOR ADVANTAGES: » The easily removable deflector wedge acts as a third stator knife and can be adjusted to set the rotor’s aggressiveness at the initial cutting point. » V-cut technology produces high-quality regrind while simultaneously reducing energy consumption and noise levels. » The high-performance bearings are separated from the cutting chamber to prevent lubricant ingress and bearing failure, thus avoiding potential material contamination. » Both rotor and stator knives are adjusted from the outside. Rotor diameter (mm): 560 Rotor width (mm): 1000 Drive capacity (HP): 100 Rotor knives (units): 5 x 2 Stator knives (rows): 2 + 1 Hopper opening (mm): 1000 x 650 Overall length (mm): 2310 Machine length (mm): 2200 Overall width (mm): 1800 Machine width (mm): 1330 Height (mm): 3770

Gamybos metai: 2025, Sąlyga: naujas, Slow-running beside-the-press granulator GSL 300 Rotor diameter (mm): 300 Rotor width (mm): 600 Rotor speed (rpm): 150 Drive (kW): 11 Number of rotor blades: 48 Number of stator blades: 2 Screen perforation (mm): > 6 Weight approx. (kg): 950 The slow-running beside-the-press granulators of the GSL series are mainly used in injection molding and blow molding processes for the inline size reduction of sprues and defective parts. Thanks to various hopper and extraction systems, the machines can be flexibly integrated into existing installations. GSL 300 models are also suitable as central granulators for lower throughput rates. Highlights of the GSL series: Dedpfx Adoi Hpf Nemecr - Low noise operation due to the low rotor speed, inclined cut, and a soundproofed hopper constructed in a multilayer sandwich design - Powerful and efficient drive thanks to branded gear units - Easy maintenance, cleaning, and knife changes The slow-running beside-the-press granulators of the GSL 300 series feature a rotor diameter of 300 mm and working widths of 400 mm, 600 mm, and 800 mm. The rotor is directly powered by a gearmotor with a bevel gearbox, ensuring efficient and low-maintenance power transmission and enabling the processing of demanding materials. The low rotor speed ensures low noise levels and minimal dust in the granulate. The special rotor knives can be reground multiple times, eliminating the need for complex adjustment work. Easy and fast maintenance is facilitated by the "Quick Snap" quick-release system. Material is fed into the granulator via a sound-dampening hopper made in sandwich construction. Depending on requirements, the machines can be equipped with various hopper variants. The final material size is determined by the hole diameter of the screen fitted below the cutting chamber. The high-quality regrind produced is either extracted or filled into bags or plastic bins. Low or high base frames are optionally available. Applications The slow-running beside-the-press granulators of the GSL 300 series are suitable for the size reduction of production waste, including large-area parts or hollow bodies. Another area of application is use as a central granulator with lower throughput quantities. The robust construction and high torque of the GSL 300 series also allow for the processing of thick-walled parts.

Sąlyga: naujas, Gamybos metai: 2025, Slow-speed beside-the-press granulator Rotor diameter (mm): 180 Rotor width (mm): 300 Rotor speed (rpm): 150 Drive power (kW): 4 Number of rotor knives: 30 Number of stator knives: 2 Dcodpfx Adjt Aam Homsr Screen perforation (mm): >5 Weight approx. (kg): 180 The slow-speed beside-the-press granulators of the GSL 180 series feature a rotor diameter of 180 mm and working widths ranging from 120 to 430 mm. The rotor is directly driven via a gear motor. The low rotor speed ensures reduced noise levels and a consistent regrind quality. The special rotor knives can be resharpened multiple times, eliminating the need for complex adjustment work. The granulators are loaded via a noise-insulated chute in sandwich construction. Depending on the application, the machines can be equipped with various hopper variants. Optional low and high base frames are available. The regrind can be extracted, filled into bags, or collected in a plastic container. Easy and quick maintenance is ensured by the Quick Snap quick-release system.