Šoniniai šlifuokliai GSL -180/ 180

ZERMA GSL-180/180

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 4966, Rotoriaus skersmuo: 200 mm Rotoriaus plotis: 180 mm Rotoriaus peiliai: 3x4 Statoriaus peiliai: 2 Įvado skerspjūvis apie: 200 x 180 mm Nledpfxjxyax De Aduji Pavaros variklis: 3 kW

Gamybos metai: 1990, Sąlyga: naudotas, Pressure: 75 t Throat depth: 300 mm Stroke: 8 - 110 mm Table size: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Passage opening in table: 250 x 150 mm Ram bore: 40 mm Strokes per minute: 60 + 90 spm Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram at bottom stroke, ram down: 19 mm Distance table/ram at top stroke, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, new hydraulics and oil cooler - with gear drive in oil bath Nloded Nl E Uspfx Aduei - fixed table prepared for attaching tool change consoles - 2 roller rails in table - mechanical overload in ram (shear plate) The following work will be carried out on the machine / partial refurbishment: - Machine will be completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine will be repainted - New Balluff cam switchgear - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication - New control cabinet with touch panel and ABB safety control - Current safety inspection (German UVV) including brake time measurement

Gamybos metai: 2023, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Zerma snijmolen type GSL 180/300 IE-motor 4,0 kW, 400V, 50 Hz Rotordiameter: 180 mm, rotorsnedebreedte: 300 mm Rotormessen: 30 stuks, vaste messen: 2 stuks Lage uitvoering, op wielen Standaard trechter Zeefinzet: Ø >5 mm rond Nleder E Aqvopfx Aduji

Gamybos metai: 2024, Sąlyga: naujas, Slow-Running Auxiliary Granulator Rotor Diameter (mm): 180 Rotor Width (mm): 180 Rotor Speed (rpm): 150 Drive Power (kW): 3 Number of Rotor Blades: 18 Number of Stator Blades: 2 Screen Perforation (mm): >5 Approx. Weight (kg): 140 The slow-running auxiliary granulators of the GSL series are primarily used in the injection molding and blow molding sectors for the inline granulation of sprues and defective parts. Due to various hopper and extraction systems, the machines can be flexibly integrated into existing installations. GSL 180 – For granulating sprues from injection molding and blow molding applications Nodpfeiy D Szox Aduoli GSL Series Highlights: - Low noise operation due to the slow rotor speed, inclined cut, and a soundproofed hopper in multi-layer sandwich construction - Powerful and efficient drive thanks to branded gearbox - Easy maintenance, cleaning, and blade change The slow-running auxiliary granulators of the GSL 180 series feature a closed rotor with a diameter of 180 mm. Machines are available in working widths from 120 mm to 430 mm. The rotor consists of individual discs directly connected via an oversized drive shaft to a spur gear unit, enabling efficient and low-maintenance power transmission. Material for granulation can be fed manually, via conveyor belt, or robot, through a generously dimensioned, soundproofed hopper in sandwich construction. As standard, the granulator is mounted on a low-profile base frame with swivel casters. Material discharge is via a vacuum trough inserted beneath the screen, with a pipe connection for conveying units. Applications The slow-running auxiliary granulators of the GSL 180 series were specifically developed for granulating sprues from injection molding and blow molding processes. Thanks to their easy accessibility, color and material changes can be carried out quickly. The low rotor speed allows processing of both soft and hard materials, and ensures high-quality granulate with minimal fines generation.

Gamybos metai: 2013, Sąlyga: paruoštas naudoti (naudotas), A Boy injection moulding machine is available. Clamping force: 100 kN, tie bar spacing (diagonal): 205 mm, maximum platen opening: 250 mm, ejector stroke: 50 mm, screw diameter: 14 mm, shot volume range: 1 cm³ / 15.3 cm³, machine dimensions (L/W/H): approx. 1500 mm / 550 mm / 1400 mm, weight: approx. 500 kg, control system: Procan ALPHA. Documentation is available. On-site inspection is possible. Nljdpfx Adev Ext Iousi

Sąlyga: naujas, mašinos/transporto priemonės numeris: Baureihe GSL 180 / Neumaschine, The ZERMA beside-the-press granulators of the GSL series 180/120 to 180/430 have been developed as slow-running machines specifically for injection molding applications. They feature a rotor diameter of 180 mm and working widths ranging from 120 to 430 mm. The rotor is directly driven by a gear motor. The special rotor knives can be resharpened multiple times. Nlodpfsghgbdox Aduji Feeding of the material to be granulated is done via a low-noise feed hopper constructed in a sandwich design, which is available in various versions depending on the type of charging. Depending on the application, these granulators can be mounted on a low or high chassis and are completed with a matching suction or discharge bin. Additionally, with a wide range of options, the granulators are extremely versatile in their applications. Besides the typical benefits of all slow runners, such as low noise emissions and virtually dust-free regrind, the GSL 180/120 to GSL 180/430 granulators particularly stand out due to their knife, rotor, quick-snap system, and excellent accessibility.

Gamybos metai: 2024, Sąlyga: naujas, Slow-Speed Side Mill Rotor Diameter (mm): 180 Rotor Width (mm): 180 Rotor Speed (rpm): 150 Drive Power (kW): 3 Number of Rotor Blades: 18 Number of Stator Blades: 2 Screen Perforation (mm): >5 Weight approx. (kg): 140 The slow-speed side mills of the GSL series are primarily used in injection moulding and blow moulding applications for inline granulation of sprues and defective parts. Thanks to various hopper and extraction systems, the machines can be flexibly integrated into existing installations. Nledpjqmik Ijfx Aduoi GSL 180 For granulating sprues from injection and blow moulding processes Highlights of the GSL series: - Low noise due to the low rotor speed, angled cut, and multi-layer sandwich soundproof hopper - Powerful and efficient drive with branded gearbox - Easy maintenance, cleaning, and blade replacement The slow-speed side mills of the GSL 180 series are equipped with a closed rotor of 180 mm diameter. Machines are available in working widths from 120 mm to 430 mm. The rotor is made up of individual discs, directly connected to the spur gearbox via an oversized drive shaft. This ensures efficient, low-maintenance power transmission. The material to be granulated can be fed manually, by conveyor, or by robot through the generously dimensioned, soundproof sandwich-type hopper. As standard, the mill is mounted on a low base frame with castors. Material discharge is carried out via a suction tray slid beneath the screen, with a pipe connection for a suction conveyor. Applications The slow-speed side mills of the GSL 180 series have been specifically developed for granulating sprues from injection and blow moulding production. Their easy accessibility allows for speedy colour and material changes. The low rotor speed enables the processing of both soft and hard materials, ensuring high material quality with minimal dust generation.

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 83 000 h, spaudimo jėga: 350 kN, varžto skersmuo: 25 mm, For sale is an injection moulding machine by Arburg, model 320S 350-60. Year of manufacture: 2000 Automatic operating hours: 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide upon request, at an additional cost. Price incl. VAT Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Nsdpfx Aohhuq Asduoli Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Sąlyga: naujas, Gamybos metai: 2025, Slow-speed beside-the-press granulator Rotor diameter (mm): 180 Rotor width (mm): 300 Rotor speed (rpm): 150 Drive power (kW): 4 Number of rotor knives: 30 Number of stator knives: 2 Nledpfx Adjt Aam Houoi Screen perforation (mm): >5 Weight approx. (kg): 180 The slow-speed beside-the-press granulators of the GSL 180 series feature a rotor diameter of 180 mm and working widths ranging from 120 to 430 mm. The rotor is directly driven via a gear motor. The low rotor speed ensures reduced noise levels and a consistent regrind quality. The special rotor knives can be resharpened multiple times, eliminating the need for complex adjustment work. The granulators are loaded via a noise-insulated chute in sandwich construction. Depending on the application, the machines can be equipped with various hopper variants. Optional low and high base frames are available. The regrind can be extracted, filled into bags, or collected in a plastic container. Easy and quick maintenance is ensured by the Quick Snap quick-release system.

Gamybos metai: 2025, Sąlyga: naujas, Slow-speed beside-the-press granulator Rotor diameter (mm): 180 Rotor width (mm): 430 Rotor speed (rpm): 150 Drive (kW): 4 Number of rotor knives: 45 Number of stator knives: 2 Screen perforation (mm): >5 Weight approx. (kg): 250 The slow-speed beside-the-press granulators of the GSL series are mainly used in injection moulding and blow moulding applications for inline granulation of sprues and defective parts. Thanks to various hopper and extraction systems, these machines can be flexibly integrated into existing installations. GSL 180: For the granulation of sprues from injection moulding and blow moulding processes Highlights of the GSL series: - Low noise emission thanks to the low rotor speed, inclined cutting geometry, and multi-layer sandwich design soundproofed hopper - Powerful and efficient drive thanks to branded gear units - Easy maintenance, cleaning, and knife changing The slow-speed beside-the-press granulators of the GSL 180 series are equipped with a closed rotor with a diameter of 180 mm. The machines are available in working widths from 120 mm up to 430 mm. Nljdpfji Hpfdsx Aduoi The rotor consists of individual discs connected via an oversized drive shaft directly to the spur gear. This allows for efficient and low-maintenance power transmission. The material to be granulated can be fed manually, by conveyor belt, or by robot via a generously sized soundproofed hopper in sandwich design. As standard, the granulator is mounted on a low base frame with swivel casters. Discharge is through a suction tray located beneath the screen, equipped with a pipe connection for a vacuum conveyor. Applications The slow-speed beside-the-press granulators of the GSL 180 series have been specially developed for the granulation of sprues from injection moulding and blow moulding processes. The easy accessibility enables quick colour and material changes. The low rotor speed also allows for the processing of both soft and hard materials, ensuring high material quality with minimal fines.

Gamybos metai: 1999, Sąlyga: labai geros būklės (naudotas), INJECTION MOLDING MACHINE KRAUSS-MAFFEI 150-700 C1 Year: 1999 Screw diameter: 55 mm Njdpfx Ajh S Dncodusli In excellent condition, still in operation