Granulatori pirkti naudotą (89)

Gamybos metai: 2011, būklė: geras (naudotas), Extrusion Line Nr. 1 is designed for the production of cast film. Suitable for processing thermoplastics within a temperature range of 150–300°C. POSSIBLE LAYER CONFIGURATIONS: - Monolayer film - 3-layer (A-B+C-A) - 5-layer (A-B-C-B-A) LINE DATA Total extruder output max. 2,230 kg/h Extruder A: 90/33 L/D, max. 330 kg/h Rjdpfx Ajpah U Tshmjcf Extruder B: 135/33 L/D, max. 950 kg/h Extruder C: 135/33 L/D, max. 950 kg/h Net film width range: 1,600 – 2,110 mm Option for two-roll slit (2 x 800 – 2 x 1,055 mm) Thickness range: 25–580 μm Production speed: 10 – 150 m/min Roll width: 2,500 mm Max. roll weight: 2,000 kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness measuring system for automatic transverse profile measurement with dual-sided corona treatment (max. 12,000 W) Optical inspection system, including marking unit for detected defects, transmitted- and incident-light inspection INFRASTRUCTURE (AUXILIARY EQUIPMENT): Dryers 1–4 with 4,500 L capacity; heating output 48 kW each Dryer 5 with 2,500 L capacity; heating output 20 kW Dryer 6 with 1,500 L capacity; heating output 15 kW Each extruder equipped with a gravimetric batch dosing system (3 stations each) Each extruder equipped with melt pump and dual-piston screen changer MAIN COMPONENT SUPPLIERS: SML: Extruders; take-off unit, rollers, winder GWK: Cooling extruder KREYENBORG: Screen changer Cloeren: Feedblock, wide slot die PIOVAN: Dryers, dosing units SERVE: Edge trimming system MATHO: Extraction system RAPID: Edge strip granulator KONGSHILDE: Edge trim handling, start-up rollers INFSTAUB: Filling station SMK: Chillers SIEMENS: Controls OCS: Camera inspection system SEMET: Labelling system AFS: Corona station BETA CONTROLL: Radiometric thickness measurement SML: Automatic flying splice winder, BECKHOFF control system SIMCO: Antistatic equipment ALTEK: Automatic roll handling cart (transfer trolley)

Gamybos metai: 2011, būklė: paruoštas naudoti (naudotas), Screw diameter: 59 mm, screw speed: 25-250 rpm, complete documentation, control cabinet, screen changer, side feeder, granulator, and additional accessories included. Rcedpfx Ajhtvmhshmef

Būklė: naudotas, Refurbished heavy-duty granulator, wear-protected. Suitable for dry and wet size reduction. Typical applications: plastic hollow bodies, secondary shredding of pre-shredded waste. Rotor: 800 mm diameter x 1600 mm width Rcodpfxjzuyuhe Ahmof Open F7 rotor with exchangeable knife support systems Drive power: 160-250 kW With forced material feed via 3 load-dependent controlled feed screws Hydraulically opening mechanism, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and particle size.

Būklė: naudotas, Refurbished heavy-duty granulator, wear-protected. Rjdpfxjzuyq Ns Ahmjcf Suitable for dry and wet size reduction. Typical applications: plastic hollow bodies, secondary shredding of pre-shredded waste. Rotor: 800 mm diameter x 1600 mm width Open F7 rotor with exchangeable knife support systems Drive power: 160-250 kW With forced material feed via 3 load-dependent controlled feed screws Hydraulically opening mechanism, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and particle size.

Gamybos metai: 2021, būklė: geras (naudotas), 1 complete granulation line, cutter-compactor/extruder combination, tangential design, since 2021 operated only in single-shift mode processing production waste, including DPE regrind/aluminum (pipe material). The system consists of: - Hydraulic roll cutter, 140 cm width, for roll diameters up to 60 cm, 18.5 kW drive - Erema conveyor belt with metal detector bridge, 900 cm x 110 cm, with timer - Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic pusher, Rotor equipped with 74 reversible cutting crowns, discharge and inclined conveyor screw - Roll feeder for heavy rolls with longitudinal cutting device to relieve the mill, frequency-controlled drive 3.5 kW Rcsdpfszb Dr Ssx Ahmof - Cutting mill, 11 kW, arranged downstream for parallel operation with shredder/roll feeder, extraction/conveyor blower to buffer silo with agitator, frequency-controlled for discharge rate/dust containment - Feed screw for regrind - Conveyor belt, L 9 m x W 80 cm with metal detector bridge, frequency-controlled via load on cutter-compactor - Conveyor screw for 100% regrind, stainless steel, L 4.5 m and diameter 100 mm - Cutter-compactor 138 kW, frequency-controlled, extraction blower, water spray cooling, tangential to extruder ES 180 mm, 30 L/D, with dual vacuum degassing, including - Laser filter LF with 500 mm diameter / 2-disk system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh, 2x 70 mesh - Strand die, 26 holes – interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts scheduled for January 2026 - Water bath for strand cooling, L 700 cm x W 70 cm, stainless steel. Plastic strand rollers with stainless steel ball bearings, height-adjustable, year of manufacture 2023 - Strand granulator SG 200 E, 7.5 kW plus 1x spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work - Granulate classification sieve, stainless steel, including conveying fan and pipes - BIG BAG filling stand, 2-station, with stairs and platform - BIG BAG floor scale with label printer - Throughput depending on material, up to 900 kg/h - Start-up and commissioning by our technicians; details and costs on request, subject to arrangement - Inspection in Wuppertal, appointments available at short notice by arrangement

Būklė: naudotas, Refurbished heavy-duty granulator, wear-protected. Suitable for dry and wet size reduction. Typical applications: plastic hollow bodies, secondary shredding of pre-shredded waste. Rotor: 800 mm diameter x 1600 mm width Rcsdpfx Aheztm Eqemsf Open F7 rotor with exchangeable knife support systems Drive power: 160-250 kW With forced material feed via 3 load-dependent controlled feed screws Hydraulically opening mechanism, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and particle size.

Būklė: naudotas, The plant is suitable for the agglomeration of thermoplastic films and fibers. Throughput, depending on the material, is between 500 kg – 1000 kg/h. The plant consists of: Rcjdpfeztm Dmjx Ahmsf • Feed conveyor • Load-dependent control for the feed conveyor • Metal detector coil • HERBOLD granulator type SMS 45/100-H5-3 • Pneumatic material transport to the storage silo • Plastcompactor unit HV-70, consisting of feed screw from the storage silo, plastcompactor, central blower, and cooling circuit • HERBOLD secondary granulator type SML 45/100-S4-2 • Intensive cooling • Conveying blower SZS II 630/200 • Screening machine • Undersize material return to the compactor silo • Material transfer system type MFT with Big Bag station and automatic diverter to on-site silo • Automatic exhaust air filter • Electrical control panel • Compressor.

Būklė: naudotas, Refurbished heavy-duty granulator, wear-protected. Suitable for dry and wet size reduction. Rjdpjztm Aisfx Ahmocf Typical applications: plastic hollow bodies, secondary shredding of pre-shredded waste. Rotor: 800 mm diameter x 1600 mm width Open F7 rotor with exchangeable knife support systems Drive power: 160-250 kW With forced material feed via 3 load-dependent controlled feed screws Hydraulically opening mechanism, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and particle size.

Būklė: naudotas, Granulator / Cutting mill Manufacturer: HERBOLD MECKESHEIM Model: SMS 80/160 Redpfx Aoztmy Ishmscf Rotor: 800 x 1600 mm (width) Drive motor: 250 kW

Būklė: naudotas, HERBOLD Granulator Type SMS 60/100 Redpfx Asztmynjhmocf Heavy-duty design Feed opening: 700 x 1000 mm Open rotor: 600 mm diameter x 980 mm width (optionally as open 3- or 7-knife rotor) Drive motor: 110 kW Hydraulic tilting device with electric winch

Būklė: naudotas, Granulator (Cutting Mill) Manufacturer: CONDUX Model: CS 300/600-4 WK Rcodpfx Ajztmx Rohmjf Rotor: 300 mm diameter x 600 mm width 3 rotor blades, open rotor tHousing with 4 stator blades Equipped with 11 kW drive motor (up to 30 kW available on request)

Būklė: naudotas, Refurbished heavy-duty granulator, wear-protected. Suitable for dry and wet size reduction. Typical applications: plastic hollow bodies, secondary shredding of pre-shredded waste. Rotor: 800 mm diameter x 1600 mm width Open F7 rotor with exchangeable knife support systems Drive power: 160-250 kW Rcsdpfsztmv Ajx Ahmof With forced material feed via 3 load-dependent controlled feed screws Hydraulically opening mechanism, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and particle size.

Būklė: naudotas, Granulator / Granulators Rcjdpjztmu Eofx Ahmof Manufacturer: HERBOLD MECKESHEIM Model: SMS 80/160 Rotor: 800 x 1600 mm (width) Drive motor: 250 kW

Gamybos metai: 2000, būklė: paruoštas naudoti (naudotas), A complete Hosokawa mill for the processing of polyester resin lumps is available. System overview: Input material: Polyester resin, maximum input material size (dry): 800mm/600mm/20mm-30mm, Fineness: below 1.5mm, round hole diameter: 15mm, system capacity: approx. 3,000kg/h, analysis method: Alpine air jet sieve 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2,030mm/1,440mm, feed hopper volume: 2.5m³, working width: 1,500mm, cutter circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions (L/W/H): approx. 2,100mm/2,200mm/2,300mm, weight: approx. 3,500kg. 2) Automatic de-dusting filter AE 48 L, filter area: 42m², filter bags: needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. screen hole size: 3mm, required power: 55kW. Including extraction system, conveyor system, and accessories/peripheral equipment. Documentation available. On-site inspection possible. Rcedpfx Ahjvdu N Ajmsf

Gamybos metai: 2022, būklė: paruoštas naudoti (naudotas), A Getecha plastic granulator is available. Rotor diameter: 300 mm, cutting width min./max.: 400 mm / 1260 mm, number of rotor knives: 5, motor power: 5.5 kW. Includes an enlarged control cabinet. Completely overhauled with less than 100 operating hours. Documentation available. Redpfsucw S Esx Ahmscf

Gamybos metai: 2026, būklė: naujas, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled plastic parts or for re-shredding wood chips. Further details can be provided after testing with your material. Our granulators are used for the size reduction of a wide range of materials such as plastics or wood. Shredders and granulators are suitable for diverse shredding tasks across various applications. For example, defective parts and sprues arising at injection moulding machines need to be reprocessed. In blow moulding operations, besides rejects, there are also waste pieces or startup hoses. Materials that can be processed include, among others, blow moulding materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes. Material is fed from above via a hopper into the cutting chamber of the granulator. The rotor inside is equipped with cutting knives. The material is shredded between the rotating blades and the stationary knives until it reaches a defined granulate size and passes through the screen beneath the rotor. *Optionally, the processed material can then be conveyed pneumatically to Big Bags, silos, or other containers. The price applies only to the granulator system as shown in Image 1 – fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput: up to 120 kg/h when shredding plastics *highly dependent on screen and material Application example: Size reduction of PE 1000 plastic Input material: approx. 40 mm chip length Final granulate size: approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) ___ For G 30 wood chip re-shredding, significantly higher throughputs are possible – up to max. 400 kg/h with a 10 mm screen. *Metered feed, e.g. via conveyor belt or auger. Details after testing with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Exhaust connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – additional screens available Price per screen: €390 Price for spare knife set: €679 Suitable for, e.g.: - All types of plastic waste Materials such as HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Items from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger systems are also available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm *Optionally with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Rcsdpod N Dn Dsfx Ahmjf Infeed opening: 620x500 mm *Optionally with matching extraction/transport system --- The following information is required for machine configuration: - Length x Width x Height of input material? - Screen size required (to what granulate size)? - Desired hourly throughput in kg? - Wall thickness in mm? - Material description Photos may also be helpful.

Būklė: naujas, mašinos/transporto priemonės numeris: Baureihe GSE / Neumaschine, Economic granulators: This GSE series is ideal for all injection molding and blow molding operations. It is generally suitable for all thin-walled plastic waste. These granulators are characterized not only by their attractive purchase price, but also by their robust, split steel/welded housing, ease of cleaning, and simple knife and screen changes. Thanks to the tangential housing geometry in combination with V-cut rotors (except GSE 300/300), even bulky and large-volume feed parts are accepted by the rotor and shredded. Regrind transport: As standard, the granulators are equipped with an extraction system and bagging station. Optionally, a regrind collection bin is available, which, like the extraction tray, is made from stainless material. Rodpfx Ahjyr I Eqjmscf

Būklė: naudotas, mašinos/transporto priemonės numeris: 11552, Rotor diameter: 2 x 150 mm (duplex rotor) Rsdjyr Tlcspfx Ahmjcf Rotor width: 200 mm 2 x 12 rotor knives 2 + 1 stator knives Feed opening approximately 350 x 200 mm Drive motor 15 kW The counter-rotating cutting rotors of the SM Duplex ensure effective material infeed, particularly with bulky, thin-walled components and lightweight hollow bodies. The granulator can be used either as a central granulator or as an auxiliary granulator beside an injection moulding or blow moulding machine. This makes it suitable for shredding sprues or rejected parts, such as those generated during machine start-up.

Būklė: naujas, mašinos/transporto priemonės numeris: Baureihe GSC / Neumaschine, The compact granulators of the GSC series are fully soundproofed cutting mills and are therefore particularly quiet in operation. Thanks to its sophisticated design, the integrated soundproofing ensures optimal accessibility to the granulator itself, facilitating knife and screen changes. The noise protection is based on the use of state-of-the-art sound-absorbing materials. The housings, made from a robust steel/welded construction, in combination with the V-cut rotors (except for the GSC 300/300), provide long service life and universal applications. The tangential housing geometry allows the rotor to efficiently accept and process even bulky feed materials. All machines in the GSC series always deliver high-quality regrind—regardless of whether the feedstock is injection or blow-moulded waste, profiles, sheets, or films. The GSC series types are cost-efficient, highly reliable, easy to clean, and feature a long service life. Integrated Sound Insulation: The integrated sound insulation ensures a pleasant working environment with a low noise level. The optimized design provides ideal access to the machine components. Rsdjyr I E Djpfx Ahmjcf Mobile Compact Design: The integrated soundproofing makes the granulators compact and mobile. The machines can be easily transported to any desired location using a pallet truck or forklift. ZERMA offers a wide range of options such as extraction systems, conveyor belts, metal detectors, and fine material separators.

Būklė: naujas, mašinos/transporto priemonės numeris: Baureihe GSL 180 / Neumaschine, The ZERMA beside-the-press granulators of the GSL series 180/120 to 180/430 have been developed as slow-running machines specifically for injection molding applications. They feature a rotor diameter of 180 mm and working widths ranging from 120 to 430 mm. The rotor is directly driven by a gear motor. The special rotor knives can be resharpened multiple times. Feeding of the material to be granulated is done via a low-noise feed hopper constructed in a sandwich design, which is available in various versions depending on the type of charging. Depending on the application, these granulators can be mounted on a low or high chassis and are completed with a matching suction or discharge bin. Additionally, with a wide range of options, the granulators are extremely versatile in their applications. Besides the typical benefits of all slow runners, such as low noise emissions and virtually dust-free regrind, the GSL 180/120 to GSL 180/430 granulators particularly stand out due to their knife, rotor, quick-snap system, and excellent accessibility. Rcsdpfx Aeyr I Edshmef

Būklė: naujas, mašinos/transporto priemonės numeris: Baureihe GSL 300 / Neumaschine, The granulators of the GSL Series 300/400 up to 300/800 are primarily designed for the size reduction of production scrap in injection molding and blow molding applications. Rcjdpoyr I Ekofx Ahmsf In addition to the key advantages of the GSL series, the slow-speed granulators GSL 300/400, GSL 300/600, and GSL 300/800 are particularly suitable for processing large-surface components, such as automotive door panels, bumpers, or hollow bodies. Due to the ‘V arrangement’ of the rotor knives, the pre-shredded material is held in the rotor center. This significantly reduces wear on the grinding chamber walls when processing glass fiber-reinforced plastics. Material build-up on the side walls is avoided. With the staggered arrangement of the rotor discs, only one knife is in operation at a time, providing consistently higher cutting force.

Būklė: naujas, mašinos/transporto priemonės numeris: AMIS Kabelaufbereitung, System consisting of a granulator, sorting table for separating exposed plastic and copper granulate, extraction unit, and control cabinet. Each component is pre-assembled as a transportable unit on a base plate. Rjdpsyr Ti Usfx Ahmscf Advantages of the compact system: low installation height, small footprint, components arranged for easy cleaning and maintenance, short installation time, and, last but not least, an attractive price.

Būklė: naujas, ZHS 600 - 18.5/22 kW Rcjdpfx Ahoyr I Irjmof Rotor diameter: 400 mm Working area: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working area: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working area: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working area: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working area: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working area: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working area: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working area: 2,480 x 1,550 mm ZHS – Economical All-Rounders The ZHS series is equipped with a load-dependent, hydraulically controlled pusher that feeds the material horizontally to the rotor in a slightly inclined position. The material is cut between the rotor and stator knives until it falls through the bolted and replaceable screen located beneath the rotor. The interchangeable screen determines the final particle size. The shredded material can be discharged via conveyor belt, discharge screw, or pneumatically via a suction system. The single-shaft shredders of the ZHS series are designed for light to medium-duty applications in the plastics industry. Technical details: - Roller-mounted hydraulic pusher with horizontal movement - Bolted knives and knife holders - Optional segmented floor for processing particularly thin parts and materials - Rotor aggressiveness can be increased or decreased with bolt-on fillers - Can be combined in a two-stage system with a granulator as a pre-shredder

Būklė: naujas, mašinos/transporto priemonės numeris: GSH, The ZERMA GSH series granulators are extremely robust machines designed for the toughest demands and tailored to the versatile requirements of modern recycling operations. The housings, constructed from heavy-duty steel with welded fabrication, are capable of withstanding exceptional loads. The bearings, knife mounts, and rotor shafts are significantly oversized, making them extremely durable. With simple conversion, both solid lumps and thick-walled pipes as well as hollow bodies and films can be efficiently processed. Depending on the specific application (including temperature-sensitive materials), various rotor designs are available, all featuring one key advantage: superior and modern V-cut technology. All machines in the GSH series consistently deliver high-quality regrind—whether processing bottle crates, profiles, sheets, films, start-up lumps, or pipes. They are economical, highly reliable, easy to clean, and offer long service life. Paired with ZERMA’s comprehensive range of options, accessories (such as extraction systems, conveyor belts, metal detectors, fines separators, roller feed systems, etc.), and spare parts, a custom-optimized shredding system can be created. The benefits include considerably reduced costs, time, and staffing requirements. Thoughtful housing design The housing is centrally split at an incline, and the upper part with feed hopper can be hydraulically opened, giving full access to the rotor for knife changes and cleaning. The screen insert is also held in a hydraulically swiveling basket, ensuring optimal accessibility for screen removal and installation. The screen insert is reversible. Redpsyr Thdsfx Ahmscf Robust external bearing arrangement Another well-considered design aspect is the external bearing arrangement. Heavy-duty rolling bearings housed in steel casings ensure long service life and are ideal for extreme loads. The external bearing setup prevents grease ingress into the cutting chamber and also stops processed material or fines from entering the bearing. This provides a significant advantage, especially when operating the machine in wet conditions. Flywheel To compensate for shock loads during granulation, an optional flywheel is available. The rotors are equipped as standard with a second shaft end to accommodate this. High operational safety All granulators comply with the EU Machinery Directive and carry the CE mark. Operational safety features include, for example, run-down interlocks with limit switches and hydraulically unlockable check valves.

Būklė: naudotas, mašinos/transporto priemonės numeris: 11415, Rotor diameter: 260 mm Rotor width: 260 mm 3-knife rotor, 2 stator knife rows Rjdpfx Ajyr Tkljhmjcf Feed opening approx. 260 x 260 mm Drive motor 5.5 kW Granulator with built-in feed device for bar stock. Weight approx. 500 kg