Sąlyga: naujas, Working length: 3,700 mm, 5,100 mm, 6,100 mm Working height: 160 mm Swiveling: Yes Rapid DGL 200 M Double Mitre Saw ----- with 500 mm saw blade diameter, manual length adjustment with digital length display, pneumatic angle adjustment at 45° and 90°, intermediate angles manually adjustable using a scale) Simple operation and superior quality ----- For precise, burr-free cutting of aluminium, plastic, and wood profiles. System features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Exceptionally robust machine bed - Full enclosure of guiding sleeves around the saw head guide rails - Hardened guide rails - Swivel axis mounted on both sides Digital length display: ----- Codpsxmk Aajfx Admjhf - Digital length display with 30 profile numbers and associated corrections - Edit the 30 profile numbers (name + correction) directly on the display - Corrections are calculated according to the saw’s angle (45° and 90°) - Piece counter: if the length display changes by more than 0.1 mm, the piece count resets to "0" - Stop for short pieces: recalculation of length and profile height depending on the angle position Application examples: ----- Window, door, façade, conservatory, insect screen profiles, partition systems, interior sliding door elements - PVC, PVC-aluminium - Aluminium - Wood, wood-aluminium Guaranteed dimensional and angular precision. ----- We rely on precise and efficient motion technology: linear ball bearings for length adjustment and spring-mounted swivel units for easy and secure angle setting between 45° and 90°. The length and angle adjustments on this double head mitre saw are manual. Greater operating comfort and performance can be achieved with digital length display and pneumatic swivel unit. With 500 mm saw blades, a wide range of profile systems can be processed. Technical data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Swivel range: manually 45° to 90° Saw blade: 500 mm diameter Cutting lengths: 3,700 mm, 5,100 mm, 6,100 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders (optional) Length adjustment: manual Air pressure: 7 bar Dimensions: 5,250 / 1,420 / 1,900 mm Weight: 1,260 kg Options ----- - Hydropneumatic feed - Spray device - Stop for short pieces - Rubber-coated vertical clamps - Vertical clamp with mounting plate for profile-dependent parts - Gasket clamping device - Digital length display - Outer fixed and central movable profile supports - Roller supports on movable or fixed saw unit - Chip extraction unit (Technical data as provided by manufacturer – subject to change or errors!)

Sąlyga: naudotas, Milling unit GUBISCH Spindle diameter: 40 mm Tool clamping length: 240 mm Total tool spindle length: 300 mm Chjdpfx Aeq E Iu Djdmjf >> Very good and robust design made of steel

Gamybos metai: 2011, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Feed belt speed: 10 m/min - Belt dimensions: 420x1800 mm (please consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operation from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Pneumatic pressure sanding pad - Automatic belt rotation direction change MACHINE CHARACTERISTICS: Cedpox A Unxsfx Admjhf - Main power supply: 400V, 3-phase, 50Hz, IN 22A (protected at 35A) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and lift-off of rollers - Pneumatic supply: 6 to 8 bars - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m3/h Velocity: 20 m/sec - CE marking, front/rear emergency stops, lockable main isolator Note: For your satisfaction, we remind you that belts must be slackened when the machine is not in use and that all moisture must be avoided, including condensation (dew point) inside your premises in winter. Dimensions: 1500x1300x2050 h.mm Weight: 1200 kg

Sąlyga: naudotas, Gamybos metai: 1992, Used machine Year of manufacture: 1992 Codpexgkf Uofx Admohf Technical specifications: Length of jointer table: 2,100 mm Diameter of tool spindle: 30 mm Diameter of planer heads: 100 mm Cutterhead speed: 6,000 rpm Working width: 30 – 180 mm Working height: 6 – 120 mm With an optionally available smaller planer head for the left spindle, plus narrower feed rollers, a minimum width of 15 mm can be achieved. Motor output bottom, left, right: 3.7 kW each Motor output top (thicknessing unit): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment with 1/10-step control Including step-controlled infeed roller Including planer heads Extraction ports: 160/120/120/140 mm Availability: short notice Location: Flörsheim

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 113340, ruošinio plotis (maks.): 260 mm, ruošinio aukštis (maks.): 150 mm, ruošinio ilgis (maks.): 6 000 mm, CNC profiling centre Weinig C124 - Conturex 2 – for milling, drilling, and cutting in cross and longitudinal processing. Technical specifications: Type: Weinig Conturex2 Year of manufacture: 2009 Machine number: 113340 Performance: up to 40 windows / 8 hours Min. workpiece length: 250 mm Max. workpiece length: 4500 mm (optionally 6000 mm) Workpiece width: 30 – 260 mm Workpiece height: 25 – 150 mm Main spindles: 2 × 30 kW, up to 24,000 rpm Includes a complete set of over 50 tools as shown in the photo. Clamping system: PowerGrip RePos – automatic with repositioning Table length: adapted to max. workpiece length 4500/6000 mm Chjdpfx Aewcdm Tsdmsf

Sąlyga: geras (naudotas), working width 230 mm working height 120 mm spindle diameter 40 mm 4 heads + glazing bead cutting unit ATS panel control head adjustment in two axes electric adjustment of the pressure beam Chsdpfxevtt Ayj Admof stepless feed speed adjustment The machine operated in line with other machines.

Sąlyga: naujas, Number of motors: 2 units Working length: 2380 mm Control: , RUCHSER RU-GL-45° ----- Glazing Bead Saw on Sliding Worktable Designed for parallel cutting of glazing beads on the sliding worktable. The RU-GL glazing bead saw is mounted on a sliding worktable with sensing and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw mounted on a manually movable carriage. Pneumatic clamping device from the top and the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding worktable with felt covering, total length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable support rollers for positioning sashes. Pos. 1: RU-GL Double Glazing Bead Saw 45° on RU-SA-3000 ----- For glazing beads up to 30 x 70 mm (W x H) !!! Chodpfx Adsxmkz Njmef Mounted on sliding worktable with sensing and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage, manually adjustable. Pneumatic clamping from above and from the side. Safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding worktable with felt overlay, total length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable support rollers for positioning window sashes. ----- Base price as specified above: on request! ----- Plus packaging, shipping, and the current material surcharge of 6% of the total price Options with additional charges: ----- Pos. 1.1 1 Set of carbide-tipped saw blades for RU-GL glazing bead saw D = 200 mm, 64 teeth, consisting of 1 blade each L1233 (left) and L1085 (right), with special 43° grind. Surcharge: 421.00 Euro Pos. 1.2 Holding device for measuring gauge on RU-GL for transferring measured dimensions to the saw, with pneumatic installation. Surcharge: 611.00 Euro Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. measuring length approx. 2450 mm Gauge made from square profile with 2 fixed and 2 adjustable cams for measuring the glazing bead length Surcharge: 478.00 Euro Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. measuring length approx. 1430 mm Gauge made from square profile with 2 fixed and 2 adjustable cams for measuring the glazing bead length Surcharge: 428.00 Euro Pos. 1.5 Spacer set for rabbeted glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after assessment of the glazing beads. Depending on the number of glazing beads used, several spacer sets may be required. To determine the exact quantity, we require profile drawings of the glazing beads to be used before order confirmation. Surcharge: on request, upon receipt of your glazing bead drawings Pos. 1.6 Operating time control for independent extraction system. Adjustable from 5 seconds to 3 hours. With each sawing operation, extraction is activated for the preset time. If another cut is made within the extraction interval, the time restarts. Surcharge: 702.00 Euro ----- Total price ...

Sąlyga: naudotas, Gamybos metai: 1995, Naudota mašina Chodpfxew Rhlhe Admjf Pagaminimo metai: 1995 Kaiščio įkalimo įrenginys lygiagrečiam klijavimui ir kaiščio įkalimui Kaiščių padavimas per priežiūros nereikalaujantį vibracinį padavėją Pilnai automatinė, priežiūros nereikalaujanti elektroninė valdymo sistema su pasirinkimo jungikliu PLAUTI/KLIJUOTI/KLIJUOTI-ĮKALTI Uždaras klijų tiekimo sistema 1 nerūdijančio plieno 5 l talpa klijams ir 1 nerūdijančio plieno 5 l talpa vandeniui Lengvas, patogus ir be atatrankos 8 mm kaiščių pistoletas Prieinamumas: pagal susitarimą Vieta: Flörsheim

Sąlyga: naudotas, Trumpinimo pjūklas 1,85 kW Veleno skersmuo: 40 mm Veleno ilgis: 130 mm Pagrindinio variklio galia: 4,4 kW Festo įpjovų frezavimo staklės ZA-101 ----- su trumpinimo pjūklu Csdpfx Adjxmk D Djmjhf 1 įpjovų velenas ZA ilgio ribotuvas 1850 mm, LAS sustojimo slankiklis Parduodama pagal kliento užsakymą ESAMOJE BŪKLĖJE!

Sąlyga: naudotas, Dimensions (L, W), mm Weight approx. 90 kg Chsdpfovu Hfdjx Admsf Height adjustable (yes/no): yes Lift height: 300 - 800 mm Worktable surface: 1,700 x 1,500 mm Maximum table width: 3,800 mm Payload approx. 130 kg Ruchser RU-4-SSP Rotating and Tilting Table ----- Support surface: 1700 x 1500 mm, maximum table width when swung out: 3800 mm, pneumatically tiltable, mitre cut-out, equipped with 6 storage boxes each with 2 compartments, lower pull-out extensions for widening, with 2 support legs and 2 flat clamping cylinders, lifting device from 300 - 800 mm, roller conveyor as base, foldable. Payload capacity 130 kg. Mobility unit with 4 swivel castors with locking mechanism (RU-4SSP) 2 stops for final inspection and sealing Sash assembly fixture with tool tray and adjustable stop for angling for RU-4-SSP Holder for drill, screwdriver gun, etc. with tool holster Mobility unit with flange rollers RU-DKFA and RU-4SSP 3 double-metre running rails for mobility unit 25 x 10 mm ----- Price of the above-mentioned machine on request! Plus packaging and shipping ----- (technical data as per manufacturer’s information - subject to confirmation!)

Sąlyga: naudotas, Working width: 4000 mm Working height: 2600 mm Number of pressing cylinders: 6 pcs. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, ----- CE version Robust frame construction made of thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-sided abutment for width pressing, lower abutment in two levels. Vertical press cylinders on special pressure beams with single-hand rapid adjustment and counterbalancing, height adjustable in 50 mm increments, long sliding carriages guarantee the long-term absorption of high pressing forces. Quick, smooth width adjustment via ball-bearing guided trolley with central locking, fixation in 50 mm increments. Upper horizontal pressing cylinder infinitely height-adjustable and equipped with weight compensation. Lower horizontal pressing cylinder with centering bores for both abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, with 2 pcs. vertical press cylinders d = 50 mm, stroke 120 mm, double-acting, with counterbalancing and single-hand quick adjustment; 2 pcs. horizontal press cylinders d = 40 mm, stroke 120 mm, double-acting, with counterbalancing; 2 manual control valves, manometer, 1 pressure regulator valve from 20 to 125 bar (corresponds to 400 to 2400 kg pressing force vertically), with 3 kW three-phase motor for 400 Volt, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working area: 4000 mm x 2600 mm (length x height) Required floor space: 5300 x 1250 x 3330 mm (L x W x H) Machine includes the following options: ----- Article ,00 pcs Central pressure beam with double-acting press cylinder, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article ,00 pcs Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Lateral pressure device complete with double-acting press cylinder, weight compensation, pressure hose and shut-off valve; weight compensation on lower horizontal cylinder omitted Article ,00 pcs Individual pressure regulation for lateral pressure device, pressure regulation range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Shut-off valve on 3rd vertical cylinder Article ,00 pcs Shut-off valve on upper horizontal cylinder Article ,00 pcs Width compensation insert for pressing small frames to bridge the 1st pressure beam, including shut-off valve at 1st vertical cylinder Article ,00 pcs Basic equipment for counter-profile Required height increases by 100 mm Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangular studio window press device consisting of locking device for vertical pressure beam and 3 attachable, side-guided pendulum pressure plates Chodpfou Uvalex Admsf Article ,00 pcs Double pendulum pressure plate for pointed windows (triangle) ----- Total price in above configuration ex works: On request! -----

Sąlyga: naujas, Bore Diameter: variable mm Number of Horizontal Boring Heads: 1 pc. Number of Vertical Boring Heads: 0 pcs. 1 Götzinger Dowel Gluing and Insertion Machine BLE The BLE is used for end-face gluing and dowel insertion of workpieces. Optionally, the BLE can be upgraded with a drilling unit, counter-milling unit, and longitudinal stop. A 10" touch panel enables simple operation for manual or online use. Base Frame: Compact design, sheet metal clad Table support approx. 800 x 200 mm Item 1 ----- 1 Gluing Station Full jet valve Precisely adjustable glue quantity Glue gun for counter hole gluing Item 2 ----- 1 Glue Pump made of stainless steel, high-pressure pump, and glue hose Item 3 ----- 1 Press-in Station with dowel separation and pressing cylinder Item 4 ----- 1 Vibratory Feeder for dowels d 8 x 50 mm with supply hose to the pressing unit Item 5 ----- 1 Machining Unit with cross table, linear guide, and 3 NC axis motors X = 200 mm working width Y = 120 mm working height Z = 50 mm pressing depth Item 6 ----- 1 Positioning Control 10" color touch panel Up to 500 drilling patterns can be created and saved, which can be easily accessed as needed (1 drilling pattern can contain up to 16 dowel positions) Software prepared for ONLINE connection For online control, the data must be pre-processed for the control software. Our machine can then read and process this data. ----- Total price for this configuration items 1 to 6: on request! Options at additional cost: ----- Item 7 ----- 1 Drilling Unit, horizontal, drill motor 1,000 W Speed 4,000 - 8,000 rpm, collet chuck Drill feed pneumatic Additional cost: EUR 4,305.00 Further accessories such as larger touch screen, additional dowel station for different dowel sizes, scanner for program selection, or gluing along the lintel available on request! Prices are net, plus legal VAT, ex works, packaging/shipping and commissioning not included. (Technical data as per manufacturer – without guarantee!) Chjdpfx Adsu Uu Uzsmsf

Sąlyga: naudotas, max. tool diameter, mm max. tool height, mm Operating pressure, bar Filling capacity 52 l Quicksonic QS 520 Ultrasonic cleaning unit with lid and work basket ----- Technical manufacturer's description: External dimensions (L x W x H): 560 x 460 x 510 mm Usable dimensions (L x W x H): 500 x 400 x 260 mm Basket dimensions (L x W x H): 444 x 364 x 224 mm Capacity: approx. 52 l Ultrasonic output Nominal effective power: 800 watts Peak power: 1600 watts Chsdoumng Aspfx Admjf Operating frequency: 40 or 25 kHz Mains voltage: L+N+PE, 230 V/50-60 Hz Heating power: 2000 watts Temperature control: 30 - 85°C Timer: 0-15 min & continuous operation ----- All prices ex works plus packaging, transport, insurance, and statutory VAT. (Technical data as per manufacturer's specifications – subject to confirmation!)

Sąlyga: naujas, Working width: 3500 mm Working height: 2300 mm Number of pressing cylinders: 4 pcs. S&S Frame Press Type RP 2000 – CE version Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment includes intermediate pressure bars, slanted window device, counter profiles for single-part production, and much more! Request our complete price list! Description: Robust welded frame construction made from thick-walled special profiles, sliding carriages, and pressure bars with 50 mm hole grid. Continuous stop on the left side for width pressing, lower stop adjustable in 2 levels. Vertical pressing cylinders mounted on special pressure bar, with single-handed quick adjustment with weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure long-term durability for high pressing forces. Fast and smooth width adjustment via ball-bearing mounted carriage with central locking, locked in 50 mm hole grid. Upper horizontal pressing cylinder is continuously height-adjustable and fitted with weight compensation. Lower horizontal pressing cylinder with centering bores for both stop levels, without weight compensation. Stop and pressure plate depth: 100 mm. Pressure plate and support width: 130 mm. Machine is electro-hydraulically controlled, equipped with 2 vertical single-acting pressure cylinders (d = 50 mm, stroke 120 mm) with weight compensation and one-handed quick adjustment; 2 horizontal double-acting pressure cylinders (d = 40 mm, stroke 120 mm) with weight compensation; 2 manual control valves, pressure gauge, 1 pressure control valve adjustable from 20 to 100 bar (corresponds to 400 to 2000 kg vertical pressing force); powered by a 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Completely wired for electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey. Cjdsd Ih H Sjpfx Admehf (Technical data as provided by the manufacturer, subject to change. Images may show optional equipment!)

Sąlyga: naujas, Working width: 3,500 mm Working height: 2,300 mm Number of pressing cylinders: 4 pcs. S&S Frame Press Type T 35 – CE version ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment: centre pressure beam, device for angled windows, counter-profiles for single-piece production, and much more! Request our complete price list! Description: Sturdy welded frame construction made from thick-walled special hollow profiles; sliding carriages and pressure beams with 50 mm pitch hole pattern. Continuous left-side abutment for wide component pressing, lower abutment in 2 levels. Vertical pressing cylinders mounted on special pressure beams, with single-hand quick adjustment and weight compensation, adjustable in height with 50 mm pitch. Long sliding carriages ensure permanent absorption of high pressing forces. Fast and smooth width adjustment via ball-bearing supported trolleys with central locking and fixation in 50 mm hole grid. Upper horizontal pressing cylinder is infinitely height adjustable and equipped with weight compensation. Cedpfx Asd Ih H Nsdmohf Lower horizontal pressing cylinder with centring bores for the two abutment levels, without weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm. Machine is electro-hydraulically operated, with 2 vertical pressing cylinders, diameter 60 mm, stroke 120 mm, double-acting, with weight compensation and single-hand quick adjustment; 2 horizontal pressing cylinders, diameter 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, manometer, 1 pressure control valve adjustable from 20 to 130 bar (corresponds to 550 to 3,500 kg pressing force vertically). Equipped with 3 kW three-phase motor for 400 Volt, 50 Hz operating voltage. Comes complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey. (Technical data according to manufacturer; subject to change. Images may show optional equipment!)

Sąlyga: naujas, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm LÖWER - DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Robust heavy-duty design with innovative features. Suitable for continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, from both top and bottom 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-resistant CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Positively guided pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine-dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized thickness adjustment via precision lead screws and large-sized linear ball-bearing units on hardened and ground precision shafts with dust and dirt protection - Lower-side material removal adjustment via precision lead screw, with scale ring display (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt relaxation within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated slip- and adhesion-resistant conveyor belts over heavy cast tables with super-fine planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Sanding thickness: 2-180mm - Four brake motors for the drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min. - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each, 0.37 kW - Extraction connection: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with soft disc 2740mm): 2600mm - Length with control panel (with soft disc 3035mm): 2985mm - Width: 880mm - Height: 1910mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-compliant ----- Price for the machine specified above: On request! ----- Optional accessories at additional cost: Chsdpevnv Tqsfx Admsf Workpiece air nozzle cleaning - Located at the machine outfeed, top and bottom, pneumatically controlled Sanding belt air jet cleaning, 4-belt Via nozzles arranged directly at the radius of the tension rolls inside the extraction unit, timer-controlled on/off, each 5...

Sąlyga: naujas, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electro-hydraulic frame press machine, type Super Cjdpfx Adod Rzc Remehf Options: Working widths from 3,000 mm up to 5,000 mm Working heights from 2,000 mm up to 3,000 mm Optional equipment such as center pressure beam, tilting sash device, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner joints available as option), CE specification The only fully automatic, self-adjusting high-performance frame press in which pre-positioning of the timber components is not required. Width and height adjustments are made automatically, without any time loss, immediately after direct insertion of the workpieces into the pressing area. No repositioning of the timbers is necessary. Base machine features a heavy-duty welded frame construction using oversized, thick-walled special profiles. Guideways of the press corners on the pressure beams are designed for minimal wear. Continuous counter bearing on the stop side for width pressing, built in a torsion-resistant design, mounted to the machine base. Continuous lower counter bearing in extremely robust, torsion-resistant design, connected to both the base frame and the machine. Insertion height 500 mm. All counter bearings are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on the right with rapid, motorized width adjustment, guaranteeing parallel travel, includes automatic hydraulic locking: Central drive for dimension adjustment both horizontally and vertically, with high adjustment and travel speed, and automatic width and height adjustment (opto-electronically controlled). 2 double-acting vertical pressure cylinders, piston diameter 50 mm, 250 mm stroke, adjustable pressure force from 400 to 2000 kg. 2 double-acting horizontal pressure cylinders, piston diameter 40 mm, 80 mm stroke, adjustable pressure force from 250 to 1250 kg. Upper right press corners, heavy-duty, machined design with automatic corner positioning. Floating press corners Contact surfaces with adhesive-repellent finish. Counterbearing and pressure plate depth 100 mm. 8-way holding and positioning device for completely loose insertion of all single timber pieces into the press area (no pre-arranging or pre-positioning required). Each frame element is held and positioned twice. Automatic lifting function allows for ergonomic insertion of the upper transverse timber on tall frames at a user-friendly height. Increases work safety by enabling floor-level operation—no ladders or steps required. All frame members are placed directly into the pressing area. Program selection options: Manual, motor-driven via pushbutton, Fully automatic via optoelectronic measurement, including automatic pressing cycle combined with safety light barrier. Automatic, cycle-controlled pressing sequence via pulse input: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing. Control cabinet mounted on the left side of the base frame for easy servicing. Fast, optoelectronic dimension adjustment. Compact hydraulic unit, adjustable from 20 to 100 bar. Freely programmable electric manual control for efficient operation, especially with large or complex frame assemblies (...

Sąlyga: naujas, Number of sanding units: 2 pcs Sanding width: 190 mm Max. sanding height: 2–180 mm Chsdpfx Adsvu Hdtomjf LÖWER Double-Sided Sanding Machine DSM 2000 ----- Double-sided single-piece wood sanding machine for processing solid wood such as window profiles, etc. Robust, heavy-duty design with long cast-iron tables, brushing and finishing attachments, and conveyor feed. Suitable for continuous heavy-duty operation even with high material removal rates. - Offset, top and bottom sanding and finishing units - Direct-driven, rubber-coated sanding rollers for slip-free power transmission - Combination sanding via roller and pad for high material removal and an even contact area - Maintenance-free and wear-free CERMET-coated sanding pads, featuring excellent thermal conductivity and dimensional stability - External cooling of sanding zones for cooler grinding and extended sanding belt life - Forced, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at sanding rollers; air-borne dust extraction at pressure rollers - Integrated brushing and finishing unit with large dust extraction system - Motorized sanding thickness adjustment via precision leadscrews and large-diameter linear ball bearing sets on case-hardened and ground precision shafts, featuring dust and dirt protection - Chip removal adjustment from below via precision leadscrew with indicator ring (resolution: 0.1 mm) - Sanding belt tensioning via pneumatic cylinder for constant tension - Quick-change sanding belts with pneumatic belt release in seconds - Sanding belt run can be adjusted when changing belts - Electro-pneumatic air pressure monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport on calibrated, non-slip, high-traction conveyor belts over heavy-duty, 1000 mm long cast-iron tables with finely planed surface, spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece feeding - Feed gear motor with three selectable feed speeds for quick adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls at the workpiece infeed side - Automatic workpiece thickness sensing (no pre-measurement required) - Digital thickness display (resolution: 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speeds: 6, 11, and 16 m/min - Automatic height adjustment: 0.37 kW - Two brushing units with fiber brushes D 120 × 200 mm at 0.37 kW each - Extraction ports: 2 × 120 mm and 2 × 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2105 mm - Length with control panel: 2490 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 Volt, 50 Hz, 3 phase - CE compliant ----- Base price of the machine on request! ----- Optional accessories at additional cost: Infinitely variable feed 4–20 m/min. for speed adjustment...

Sąlyga: naudotas, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for single parts with rinse cycle. ----- Function features: Machine for horizontal flooding of single parts. The product is applied via a row of nozzles. Excess product is blown off by air jets. The pump and the air jets are automatically controlled and are only activated when a workpiece is passing through. This reduces compressed air consumption. The recirculation mode ensures minimal product usage. ----- Construction features: Structure Robust steel frame, painted with high-strength, water-soluble products. Machine body made of thick, hot-welded polypropylene panels. 4 independent chambers for infeed, flooding, blowing, and outfeed. Horizontal workpiece feed Via motor-driven grooved plastic rollers. Electric inverter for adjusting and changing the feed speed. Transmission Chedpfx Asnl Nqqsdmef The machine is equipped with an exclusive system that positions all transmission components outside the flooding chamber for easy operator access, ensuring longer operating life and facilitating maintenance operations. Moving components are protected by covers and appropriate seals. Recirculation pump Pneumatic double diaphragm pump with valves, seals, and diaphragms made of nitrile rubber, and a housing made of plastic material (PVDF). Air jets The first chamber features an air-blow system to prevent product leakage. A second air-blow system after the flooding chamber removes excess product from the workpiece. Electrical control panel According to CE, protection class IP 55. Includes inverter for setting the feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3–6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be impregnated mm 250 Max. width of workpieces to be impregnated mm 300 Max. height of workpieces to be impregnated mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinse circuit for Pro Flow ----- Price of the above machine: on request! Plus packaging and transport ----- (Technical specifications as per manufacturer – without guarantee! Illustrations may differ from the original, prices net, plus VAT (domestic))

Sąlyga: naujas, Variable drilling diameter mm Number of horizontal drilling heads: 3 Number of vertical drilling heads: 4 Weight: 1,500 kg Dimensions (L/W/H): 4,800 x 1,600 x 2,400 mm Width with support: 2,300 mm Götzinger Power Drill, Type BF 315 With the Götzinger PowerDrill, depending on type and configuration, you can: - Drill handle olives on loose frame sections or on finished sashes, using a multi-spindle drilling head, quick-change system, also suitable for routing lock cases for RC2 (WK 2) security fittings or intermediate gears - Drill corner bearings on loose frame components, with a multi-spindle drilling head, quick-change system, corner positioning by stop or to measurement (tilt windows) - Vertical drilling from above for fittings, pre-drilling for clips on loose frame sections - Vertical routing from above for handles, profile cylinders, 3D hinge hardware - Horizontal drilling with 2 drilling units, with different drilling diameters, dowel drillers on the end and longitudinal sides, transoms, glazing bars, corner joints, front doors, etc. - Horizontal routing for lock cases/fittings, etc. Machine description Base frame constructed in robust welded design, linear guide for the X-axis Table support: 3,000 x 200 mm Cedpfx Aded Ih Hqsmjhf 6 pneumatic clamping cylinders with automatic retract function 2 side stops for end face processing, manually swiveling in/out 2 longitudinal stops, manually swiveling in/out Travel paths: X-axis: 3,000 mm usable length Y-axis: 180 mm Z-axis: 105 mm Units: - 1 drilling unit (Unit 1) vertically from above, drilling motor 1.1 kW, speed 1,500–12,000 rpm, 1 spindle, ER 25 collet chuck - 1 drilling unit (Unit 2) vertically from above, drilling motor 1.1 kW, speed 3,000 rpm, with quick-change head system - 1 drilling head BKF 3, olives, quick-change - 1 drilling head BKF 3/2, corner bearings, quick-change - 1 milling unit (Unit 3) vertically from above, milling motor 2 kW, 1,500–16,000 rpm, ER 25 collet chuck - 2 horizontal drilling units (Units 4 & 5), 1.0 kW, 1,500–12,000 rpm, ER 20 collet chuck - 1 horizontal milling unit (Unit 3), 2.0 kW, 1,500–16,000 rpm, ER 20 collet chuck Control: Electro-pneumatic with 3-axis control (X, Y, Z) NC positioning controller by B+R, input via 10" TFT display Machine comes complete with 1 set of drill bits sizes 6, 8, 10, and 12 mm, 2 rough/finish cutters HM 16 mm, CE compliant, ready for connection Extraction connection: 1 x 120 mm + 1 x 80 mm Power connection: 1 x 400 V, 16 A Air connection: 1 x LW 9 mm OPTION: Right/left longitudinal stops with NC axis, height adjustment programmable, allowing dimension entry based on rebate/light dimension Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – Machine weight 1,500 kg ----- Total price for the above configuration, ex works: on request Plus freight and installation/commissioning (All technical specifications according to manufacturer — subject to change!)

Sąlyga: naujas, Assembly line consisting of: Pos. 1.0 / RU-CBM 4000 Work Table with a 500 mm extended guide rail for the additional installation of an aluminum holder screwdriving machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, work platform tilt manually adjustable. Mounting for hardware shear or hardware punch. 16 swiveling counter supports for hooking in sashes, completely pneumatically foldable for unobstructed movement of the sashes on the table surface. Device for scanning the sash fitting length for constant and variable/central gear position on pre-drilled sashes, color-based measurement detection of the fittings. RU-SH special screwdriver mounted on a carriage with pneumatic depth stop, safety control, pneumatic height adjustment, screw feed device with automatic shut-off of the refill container (manual loading for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screwing levels mounted on the carriage. RA-4, turret stop for 4 different sash widths mounted on the swiveling table. Sash dimension scanning pneumatically actuated, scanning range up to 2500 mm with simultaneous clamping of the scanner. PSF - Pneumatic clamping device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Guide rail extended to the left by 800 mm. Pos. 1.1 / 5035-1 Pneumatic tilting device for the working surface with foot valve Pos. 1.2 / 0500000 Bracket adapted to customer’s punch/shear. For mounting a customer-supplied hardware punch or hardware shear (third-party make) on the sash assembly table. Please specify manufacturer with order!!! Pos. 1.3 / 5597-7 Travel assembly for RU-CBM on semi-circular running rails. The running rollers are mounted left and right on the base frame of the table. Pos. 1.4 / 6354-6 3 double-meter semi-circular running rails 30 x 10 mm. Pos. 1.5 / 0730000 Cjdpfjd Ih Huox Admshf RU-SBL3000/40 hardware storage free-standing, length 3100 mm, depth 1250 mm, height 2200 mm, frame on the front side without supports, 40 compartments, in a single row, each 10 separated by partitions and a continuous shelf at the top, compartment size: width 280 mm, height 150 mm. Pos. 2 RU-CSA-SMB aluminum holder screwdriving machine with automatic screw feeding and manual feeding of the aluminum holders from a mobile box with pneumatic positioning device, screwdriver with depth stop and 4-position turret stop. Pneumatic y-axis positioning device against two 6-position turret stops. Feed container for manual feeding of turning holders or clip holders in square format 18.5 x 18.5 mm. The holder is manually pushed into a channel in the box and pneumatically positioned in front of the screwdriver mouthpiece. Profile depth max. 150 mm, screw spacing in y-direction max. 120 mm. Pos. 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum jib version with base column, easy-running jib, and push trolley. Slewing and trolley travel manual by pulling and pushing on the load. Outreach 6 m Construction height 4.461 m Jib lower edge 3.722 m (upper edge 3.9 m) Slewing range max. 270° Steel structure painted in RAL 7035 The base plate is to be anchored to the customer’s hall floor with...

Sąlyga: naujas, Number of sanding units: 8 pcs. Sanding width: 180 (260) mm Max. sanding height: 160 mm Dimensions (L/W/H): 3065x1600x1900 mm Machine weight approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (smoothing, denibbing, and edge breaking) or intermediate sanding of profiled window bars. Features Softdisc technology for visible surfaces as well as automatic profile and width adjustment. - 2 side-mounted lamella roller units, 0.75kW each, L=120mm, D=200mm 1 top-mounted softdisc unit Ø=200mm, 0.75kW, 1 top-mounted lamella roller unit L=200mm, 0.75kW, 1 bottom-mounted softdisc unit Ø=200mm, 0.75kW, 1 bottom-mounted lamella roller unit L=200mm, 0.75kW, 2 side-mounted lamella roller units, 0.75kW each, L=120mm, D=200mm - All sanding units feature linear guidance via linear ball bearing sets on hardened shafts - Time-controlled dipping of all lamella roller units directly over the entering edges of the workpieces. This dipping allows the units to be set deeper into the profiles. - Motorized workpiece thickness adjustment - Variable sanding lamella speed via frequency converters for adjusting the sanding intensity (separate for discs, wide rollers, and side rollers) - Disc units as Softdisc with hook-and-loop fastening for sanding discs (wood sanding) - Infeed via three lower and one upper conveyor belts and spring-loaded pressure rollers, with infinitely variable speed 4–15m/min - Touch panel adjustment of parameters: workpiece thickness, workpiece width (left side units individually), dipping depth of side units, spindle speed, feed speed - Parameter storage as machine programs in program mode Chedpfx Ajvnv Uhjdmef - Operation in automatic mode with non-contact workpiece width detection and profile recognition as well as automatic adjustment of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically sequenced powered infeed roller, automatic clamping of the workpiece, and feeding after unit adjustment - Signal lights red/green for operation status indication - Shortest workpiece length: 380mm - Conveyor belt width: 200mm - Max. workpiece width: 180mm (260mm possible with flipping process) - Workpiece height: 12–160mm - Extraction ports: 4 x 100mm and 2 x 80mm diameter - Sensor-controlled tool air blast directly at the discs - Housing dimensions (L x W x H): 3065 x 1600 x 1900 mm - Total length: 4365 mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400V, 50Hz, 3-phase, air connection 6 bar - CE compliant ----- Price of the above machine on request! ----- Optional accessories (surcharge): Set of replacement lamella strips for Leistomat SD-200 consisting of Wide units: 30 strips EH45 / 200 - 7 (rollers) 30 strips EH45 / 200 - 20 (rollers) Rabbet units: 96 strips M55 / 120 - 4 SmartFlex lamella disc Ø200 solid with 30 grooves 50mm long Set of replacement lamella strips for SmartFlex lamella disc consisting of 60 strips M35 / 50 K 180-7 S Sanding disc VB for Softdisc D=200mm, grit 220 with velour (hook-and-loop), pack of 100 pcs. Sanding disc VB for Softdisc D=200mm, grit 280 with velour (hook-and-loop), pack of 100 pcs. -----

Sąlyga: naudotas, Working width: 3,450 mm Working height: 2,000 mm Number of hydraulic cylinders: 5 pcs Loading dimensions (L x W x H): 3,600 x 1,200 x 2,720 mm Hess Perforated Plate Press "Multipress" Suitable for all types of angled, segment, and arched windows and doors. Also ideal for interior fittings or frame construction. Can be used for gluing block steps in staircase manufacturing and much more. Maximum working area: approx. 3,450 x 2,000 mm External dimensions: approx. 3,600 x 1,200 x 2,720 mm The vertical perforated plate press is manufactured with a heavy-duty, torsion-resistant steel construction. Its simple, robust, and cost-effective design ensures long service life. The perforated plate is made of 10 mm thick steel sheet with a 50 mm hole spacing. The hydraulic cylinders and abutments are self-locking. - 5 hand-operated hydraulic cylinders, insertable - Mounted on the perforated plate with integrated pump - 2,000 kp pressure limiting valve - 140 mm pressure plate width Chodpewqr R Ajfx Admof - 80 mm pressure plate depth - 60 mm piston stroke 4 fixed individual abutments (Technical data according to manufacturer – subject to confirmation!)

Sąlyga: naujas, Gamybos metai: 2025, Number of motors: 2 units Working length: 3000 mm Control: yes/CNC Loading dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Mitre Saw Exenso DS350E - 3000 mm For wooden glazing beads, muntins, profile strips, aluminium strips, etc. Cedpfx Asvzt D Tsdmohf Pos. 1.1 Article no. 942.5103 1 pc. HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade mount Ø 350 mm - Incl. 1 pc. intermediate support - Clamping of the units pneumatic - Positioning control Exenso DS3 with 15" touch panel display in dust-protected monitor housing - 3-axis control: 1 longitudinal axis and 2 swivel axes - Manual input of cutting data - Processing of data from a cutting list (data set as specified) - Processing of caliper gauge data (wireless caliper GMF) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor, and software licenses Pos. 1.2 Article no. 723.0121 2 pcs. DS saw blade wood Alternating / alternating / flat tooth - positive Pos. 1.3 Article no. 942.5236 2 sets DS workpiece clamping combined Combined workpiece clamping consisting of: Swiveling clamp, pneumatic - for clamping the material from above (free access to worktable) Horizontal clamp, pneumatic - non-rotating clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Includes pre-clamping safety pressure. Scope of delivery for 2 sets: - 2 pcs. (left/right) vertical swiveling clamps - 2 pcs. (left/right) horizontal clamps Pos. 1.4 Article no. 942.5997 DS feed unit pneumatic Pos. 1.5 Article no. 945.2007 Packaging DS350 (transport frame) ----- Total price in this configuration ex works - on request! ALTERNATIVE options, prices on request! ----- For horizontal clamping of remaining pieces for butt-cut glazing beads instead of the 2nd set Pos. 1.3 943.5236 DS workpiece clamping combined: Pos. 2.1 Article no. 942.5201 ES / DS workpiece clamping from the front - 2 pcs. anti-rotation clamping cylinders - 2 pcs. cylinder holders with clamping lever ----- For rebated glazing beads, instead of standard tables without groove: Pos. 2.2 Article no. 942.5241 DS350 table supports grooved as per customer’s sample The mounted table supports are milled according to the customer’s drawing. Please send us all profile drawings to be cut (pdf, dxf, and physical sample) ----- If, for example, aluminum is also to be cut: Pos. 2.3 Article no. 942.5203 DS feed unit hydropneumatic (instead of feed cylinder pneumatic) ----- OPTIONAL accessories, surcharge on request: ----- Pos. 2.4 Article no. 942.5237 DS software “Overlength” (subsequent steps must be confirmed) Process control incl. hardware. After entry of a cutting length > max. cutting length of the machine, the cutting process is carried out in steps. (Left unit cuts, right unit moves the material and cuts to size.) Pos. 2.5 Article no. 944.1023 GMF Caliper 3000mm Complete set (1500mm plus 1500mm extension) Incl...

Sąlyga: naujas, Velenų skaičius: 6 vnt. Darbinis plotis: 250 mm Obliavimo aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Padavimo variklis: 4 kW Padavimo greitis: 6–24 m/min. Svoris: 4770 kg Matmenys (Ilgis/Plotis/Aukštis): 4722x1860x1776 mm Keturių pusių obliavimo staklės Kuper SWT XL-6, langų versija Cedpfx Adevnv Ubemjhf su elektroniniu ašių bei radialiniu velenų reguliavimu. Tvirta, nedeformuojama ir žemo vibracijos lygio staklių bazė. Velenų skaičius: 6 Darbinis plotis: 250 mm Darbinis aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Veleno apsukos: dažnio valdomos 4000–8000 aps./min. Padavimo greitis: 6–24 m/min Išsamesnį aprašymą rasite pridėtame PDF faile! (Techniniai duomenys pagal gamintoją – be garantijos!)