Holzkraft Rla 200 pirkti naudotą (222)

Sąlyga: labai geros būklės (naudotas), model: RLA 200 Hedpfxov Rnpce Acujfn

Sąlyga: naudotas, Gamybos metai: 2018, Nominalus tūrinis srautas: 5089 m³/val. Įsiurbimo antgalis: Ø 300 mm Slėgio sumažėjimas prie antgalio: 2434 Pa Filtrų valymas: suspaustas oras Drožlių surinkimo talpa: 3 x 165 litrų Variklio galia: 7,5 kW | 400 V - 50 Hz / IE3 Garso slėgio lygis: 71 dB(A) Maksimalus suslėgto oro prijungimas: 6,0 bar Saugiklis: 25 A Matmenys (IxPxA): 3050 x 1058 x 2361 mm Svoris (neto): apie 952 kg Sandėlio vieta: Nattheim Hedpfxjxnlaps Acuefn

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum power in this class Very quiet Application Area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a matching extraction port diameter Can also be used for several dust sources High-quality, well-conceived construction Robust and compact housing made of galvanized sheet metal Extraction port can be easily converted from left to right, allowing for flexible use Large access openings for maintenance Large, mobile chip containers with clamping lever and chip collection bag Unit delivered fully assembled, ready for immediate use Mobile Filter Description: Ultra-compact with maximum filter surface area Filter media made of polyester fleece, aluminum vapor-coated, washable for extended service life Filters are standard in antistatic design, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning light on control panel The fan is positioned downstream of the filter Hfedscnw U Depfx Acujn Equipment Features: With innovative locking device for safe container positioning All units in this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Access opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter 2 fixed casters and 2 swivel casters with brakes Pre-wired for connecting machine recognition for up to 8 machines and slide valve controls Manual filter cleaning Sound pressure damper available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Rated airflow: 1095 m³/h Max. airflow: Negative pressure at rated airflow: Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, Band width: 200 mm Band length: 3000 mm Table size: 960 mm x 352 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Hedpfx Acshy Iyveusfn Oscillation: yes Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 900 mm Weight: 310 kg

Sąlyga: naujas, Gamybos metai: 2022, Naujas įrenginys Metų gamyba: 2022 Komplektacija: Stalo išplėtimas Guminiai volai Su faneruotų briaunų šlifavimo įtaisu su kontaktiniu batais Su preciziškai reguliuojamais ir matavimo liniuote Su grioveliais įleidžiamu įvedimo liniuote, skirtu faneros pertekliui nuimti Greitas perjungimas iš faneruotų briaunų šlifavimo į masyvios medienos šlifavimą Ilgis (gam.) apie: 1900 mm Plotis/gylis (gam.) apie: 900 mm Aukštis (gam.) apie: 1350 mm Svoris (neto) apie: 290 kg Osciliacijos variklio galia: 0,25 kW Ištraukimo jungties skersmuo: 140 / 100 mm Išilginio stalo aukščio reguliavimas: 230 mm Skersinio stalo min. aukštis: 720 mm Darbo stalo ilgis: 960 mm Darbo stalo plotis: 350 mm Darbo stalo aukščio reguliavimas: 230 mm Maitymo įtampa: 400 V Fazės: 3 Ph Hodpfew I Up Usx Acuefn Srovės tipas: Kintamoji srovė Tinklo dažnis: 50 Hz Šlifavimo juostos ilgis: 3000 mm Šlifavimo juostos plotis: 200 mm Juostos greitis: 20 m/s Osciliacijos eiga: 20 mm Šlifavimo paviršiaus ilgis: 1050 mm Šlifavimo paviršiaus plotis: 200 mm Įskaitant: 1 pakuotė K 80 šlifavimo juostų 1 pakuotė K 120 šlifavimo juostų Galimas greitas pristatymas Sandėlio vieta: Hochheim

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2433345525, Extraction nozzle 125 mm Nominal volumetric flow rate 884 m³/h Motor power 2.2 kW 16A Mobile Weight approx. 194 kg Hfedpsiw D U Nsfx Acusn Dimensions (LxWxH): 1000 x 840 x 1650 mm Container size 730 x 660 mm Manual filter shaker

Sąlyga: naujas, Edge sanding machine HOLZKRAFT KSO 200 F - Display machine - Relief rollers on the fence guides, with tiltable sanding unit, and oscillating sanding belt, veneer sanding device, oscillation driven by separate motor, height-adjustable sanding table, Hfedpfx Aju R S Erocusn extendable roller table extension, rubber-coated sanding roller ----- Technical Data ----- Sanding belt size: 3,000 x 200 mm, Worktable size: 960 x 350 mm, Worktable height adjustment: 230 mm, Sanding area: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Extraction port Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new display machine -

Sąlyga: geras (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, filtravimo plotas: 5,31 m², tūrio srautas: 1 400 m³/val, neigiamas slėgis: 2 210 Pa, nominali srautas: 884 m³/val, bendras svoris: 205 kg, bendras plotis: 830 mm, bendras ilgis: 1 100 mm, bendras aukštis: 1 600 mm, įėjimo įtampa: 400 V, triukšmo lygis: 71 dB, ekstrakcijos antgalio skersmuo: 125 mm, bakelio talpa: 165 l, Return unit with minor signs of use. Serial number: 125PM2246040001 Year of manufacture: 2022 Dust tested as per H3, residual dust content less than 0.1 mg/m³ Suitable for extraction and separation of dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation All models equipped with collision protection Hfodswgz T Sjpfx Acuon Application area Designed for commercial use Compatible with all woodworking machines featuring the appropriate extraction nozzle diameter High-quality, well-engineered construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, enabling flexible use Large inspection openings Large, mobile chip containers with clamping lever and chip collection bag Dust extraction unit delivered fully assembled, ready for immediate use All models are mobile For model RLA 210: Optimal chip distribution in the collection containers thanks to large filter surface area Filter description Ultra-compact design with maximum filter surface Filter material made of polyester fleece with aluminum coating for extended service life Filter comes as standard in antistatic version, tested and approved according to Category M-BIA The fan is positioned downstream of the filter If a warranty is indicated in the product description and/or scope of delivery, your statutory rights regarding defects with the seller remain unaffected. The scope, duration, content and provider of the warranty can be found in the warranty conditions. No liability is accepted for typographical errors, mistakes or incorrect representation. Subject to technical and visual modifications. Images may show optional accessories. Delivery is carried out exclusively based on our terms of delivery and payment. Sale is made through specialist dealers.

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft Extraction System RLA 210 For wood dust and chips, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights: Chip collection volume: 2 x 165 l External nominal diameter extraction port (inlet): 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data: Connection voltage: 400 V Mains frequency: 50 Hz Filter: Filter surface area: 22 m² Noise Emission: Maximum sound pressure level: 72 dB(A) Airflow Rate: Nominal airflow rate: 2262 m³/h Dust tested to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models equipped with collision protection Field of Application: Designed for commercial use Suitable for all woodworking machines with an appropriately sized extraction port High-Quality, Well-Designed Construction: Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, enabling flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Delivered fully assembled, ready for immediate use All models mobile On RLA 210 model: Optimal chip distribution in the chip containers due to large filter surface area Filter Description: Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter standard with antistatic version, tested and approved to M-BIA category Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on control box Fan installed downstream of the filter Equipment Details: Fitted with innovative locking mechanism for secure container positioning Location: In stock, 54634 Bitburg - available at short notice - Hsdshk Dfrepfx Acuofn

Sąlyga: naujas, Gamybos metai: 2021, New machine Year of manufacture: 2021 For wood dust and shavings Designed for commercial use Motor: 2.2 kW IE3 Speed: 2874 rpm Extraction port: 160 mm Filter surface area: 9.21 m² Filter cleaning: pneumatic Sound pressure level: 73 dB(A) Rated volumetric flow: 1,448 m³/h Vacuum: 2,247 Pa Chip collection volume: 2 x 165 l Hfsdpfxsqrw Erj Acusn Dimensions (LxWxH): 1755 x 830 x 1654 mm Weight: approx. 274 kg Availability: short notice Location: Hochheim

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 210PM2219030008, įvesties srovės tipas: trifazis, filtravimo plotas: 22 m², bendras aukštis: 1 800 mm, bendras plotis: 830 mm, bendras ilgis: 1 717 mm, bendras svoris: 290 kg, nominali srautas: 2 262 m³/val, įėjimo įtampa: 400 V, ekstrakcijos antgalio skersmuo: 200 mm, triukšmo lygis: 72 dB, galia: 3 kW (4,08 AG), įėjimo dažnis: 50 Hz, bakelio talpa: 2 165 l, Used unit with minor damage / scratches on the machine housing. Some fine dust is still present inside the machine. Serial number: 210PM2219030008 Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation All models equipped with collision protection Application range Designed for commercial use For all woodworking machines with a matching extraction port diameter High-quality, well-thought-out construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, allowing flexible use Large service openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag Dust extractor delivered fully assembled for immediate use All models are mobile For model RLA 210: optimal chip distribution in the collection containers due to large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminized polyester fleece for extended service life Filter standard antistatic version, tested and certified to category M-BIA The fan is positioned downstream of the filter Unit of measure: piece Pack unit: 1 Hfsdpfx Acevu Dcyjuen Metal impeller Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Prepared for connection to machine recognition for up to 8 machines and slide controls Machine recognition via potential-free contact Pneumatic filter cleaning (compressed air connection via standard plug, operating pressure 4 to 6 bar)

Sąlyga: naujas, Gamybos metai: 2025, Clean Air Dust Extractor RLA 160 For wood dust and wood chips, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood chips and wood dust. Designed for industrial/commercial applications. All clean air extraction systems in this series are H3 dust-tested, with residual dust content below 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application Clean air dust extraction systems for wood chips and wood dust Designed for commercial/industrial use Suitable for all woodworking machines with matching extraction port diameter Can also be used for multiple dust sources High-quality, well-engineered construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering versatile use Large inspection openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag Hfsdpfxjcnw T Ij Acusn Unit is fully assembled upon delivery, enabling rapid deployment Mobile Filter Description Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, washable, offering long service life Filter supplied as standard in antistatic version, tested and approved to category M-BIA Filter resistance monitored via differential pressure gauge, adjustable warning light on control panel Fan located downstream of the filter Features: New type of locking device for secure container positioning All systems in this series dust-tested to H3, residual dust content below 0.1 mg/m³ Scope of delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brakes Manual filter cleaning Model: RLA 160 Item no.: 5131620 Technical Data Extraction port diameter: 160 mm Nominal airflow: 1448 m³/h Max. airflow: 2400 m³/h Vacuum at nominal flow: 2247 Pa Filter surface: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Manual Compressed air supply: – Chip collection volume: 2 x 193 l Mains voltage: 400 V Frequency: 50 Hz Motor power: 2.2 kW Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1681 x 830 x 1654 mm Weight: 254 kg Location: In stock, 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2024, Holzkraft Edge Sander Model: KSO 200 F with Veneer Sanding Attachment Sanding unit tiltable up to 45° via lever The machine base, made of welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be switched on or off as needed Graphite-coated platen for longer sanding belt service life Height-adjustable sanding table for full utilization of the belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tensioner automatically compensates for belt length differences Double extraction ports Extendable roller table extension Sanding drum with rubber coating Veneer edge sanding device with contact shoe featuring fine adjustment, support rollers, and stop rulers Grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Hjdpfslht H Nex Acuefn Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Extraction port diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Work Table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Min. table height 735 mm Max. table height 965 mm Long table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table min. height 720 mm Cross table max. height 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Supply voltage 400 V Sanding Unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Clean Air Dust Extractor: RLA 140 For Wood Dust and Shavings, Designed for Commercial Use Article Number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Hjdpfx Acev Sk Tmjujfn Maximum performance in this class Very quiet operation All models equipped with bump protection Application Area Designed for commercial use For all woodworking machines with a matching extraction nozzle diameter High-quality, sophisticated construction Robust and compact housing made of galvanized steel sheet Extraction nozzle can be converted from left to right without difficulty, ensuring flexible use Large inspection openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag Extractor is delivered fully pre-assembled, allowing for quick commissioning All models are mobile For model RLA 210: optimal chip distribution in the chip containers due to large filter surface Filter Description Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated for long service life Filter standardly in antistatic design, tested and approved according to category M-BIA The fan is downstream of the filter TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/depth (product) approx. 830 mm Height (product) approx. 1750 mm Weight (net) approx. 210 kg Chip collection volume: 165 l Connection diameter outside extraction nozzle inlet: 140 mm Extraction nozzle axis to floor: 850 mm Electrical Data Connection voltage: 400V Mains frequency: 50 Hz Extraction motor efficiency class: IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Filter cleaning: manual Noise Emission Max. sound pressure level: 71 dB(A) Airflow Nominal airflow: 1108 m³/h Max. airflow: 1750 m³/h SCOPE OF DELIVERY Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Manual cleaning

Sąlyga: naujas, Gamybos metai: 2025, Clean Air Dust Extractor RLA 160 Holzkraft For wood dust and chips, designed for commercial use Item number: 5131620 Brand: Holzkraft Chip Collection Volume: 2 x 165 l Outside Diameter of Extraction Port (Inlet): 160 mm Length approx.: 1,755 mm Width/Depth approx.: 830 mm Height approx.: 1,654 mm Weight approx.: 260 kg Electrical Data Hfedpfx Aohkzttocusn Connection Voltage: 400 V Mains Frequency: 50 Hz Filter Filter Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Airflow Rated Airflow: 1,448 m³/h Dust Class: H3 Scope of Delivery: Metal Impeller Fan Inspection Opening for Cleaning the Bypass Filter 5 m Connection Cable with 5-pin CEE Plug and Phase Reverser Two Fixed and Two Swivel Castors with Locking Brakes Manual Filter Cleaning Item No. 5131620 Location: ex stock 54634 Bitburg - Available immediately -

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Professional Workbenches Precision-crafted and carefully finished Constructed entirely from steamed, solid beechwood All critical edges are rounded Surfaces are oiled with environmentally friendly oil Standard with integrated tool drawer The two guide rods on the vices are precisely and sturdily guided in a cast part Equipped with a smooth-running trapezoidal thread spindle Features French front vice and German tail vice with linear guidance, two short round bench dogs, two long round bench dogs, a drawer, and additional compartment Finger-jointing (box joints) on tail vice and back of the storage compartment Worktop length without vices: 1915 mm Worktop width/depth without vices: 615 mm Working height: 870 mm Front vice length: 520 mm Tail vice length: 450 mm Front vice width: 70 mm Tail vice width: 140 mm Front vice clamping width: 190 mm Tail vice clamping width: 180 mm Front vice clamping width to center of round dog: 225 mm Tail vice clamping width to center of round dog: 265 mm Top thickness: 50 mm Product length: 2120 mm Product width/depth: 790 mm Product height: 870 mm Hfodpfx Aoc Uydascuon Net weight: 91 kg Location: Available from stock, 54634 Bitburg

Sąlyga: naudotas, Gamybos metai: 2023, Used machine Year of manufacture: 2023 Unused TECHNICAL DATA Dimensions and Weights Length (product): approx. 3386 mm Width/Depth (product): approx. 3703 mm Height (product): approx. 1330 mm Net weight: approx. 1102 kg Extraction connection Extraction port diameter: 120 mm Blade guard extraction port diameter: 80 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Connected load: 8.3 kW Output: 7.5 kW Motor speed: 2800 rpm Sliding table and worktable Sliding table length: 3200 mm Sliding table width: 416 mm Sliding table height: 890 mm Table length: 1255 mm Table width: 685 mm Table height: 890 mm Noise emission Sound pressure level: 96.5 dB(A) Hfsdpew E Ty Iofx Acujn Circular saw unit Cutting width with rip fence: 1450 mm Max. cross-cut width left of saw blade: 3200 mm Saw blade tilt: 90 – 45° Max. cutting height at 90°: 200 mm Max. cutting height at 45°: 140 mm Saw blade diameter: 550 mm Saw blade speed: 2800/3665/4800 rpm Scoring unit Scoring blade diameter: 120 – 130 mm Scoring blade speed: 8000 rpm Availability: short-term Location: Saxony-Anhalt

Sąlyga: naujas, galia: 7,5 kW (10,20 AG), Įranga: dozatorius, Net price: €10,500 - Scoring unit - Saw blade tilt and height adjustment are manual - Cutting height: 200 mm - Scoring unit with separate drive motor - Main saw blade with belt drive and speeds of 2800/3665/4800 rpm Hfjdpfxswf Ndce Acuon - High dead weight ensures vibration-free operation - Large outrigger table with material roller, parallel fence with round bar guide - Extendable aluminium longitudinal fence with two flip stops - Powerful 7.5 kW main motor mounted on a robust cast iron frame - Four-point bearing format sliding table made of anodised aluminium with high torsional rigidity - Multiple locking positions on the sliding table. Standard with table extension and widening made of heavy-gauge sheet steel - Large pivoting blade guard easily lifted with gas spring assistance - Saw blade clamping via tool-free rapid system + Extraction connection Extraction port diameter: 120 mm Extraction port diameter saw blade guard: 80 mm + Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Input power: 8.3 kW Output power: 7.5 kW + Sliding table and table Format sliding table length: 3200 mm Format sliding table height: 890 mm Table height: 890 mm + Circular saw unit Cutting width with parallel fence: 1450 mm Max. cross-cut width left of saw blade: 3200 mm Saw blade tilt: 90 – 45° Max. cutting height at 90°: 200 mm Max. cutting height at 45°: 140 mm Saw blade diameter: 550 mm

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 3 200 mm, pjovimo plotis (maks.): 1 450 mm, pjovimo plotis ties tiesiniu vedliu: 140 mm, pjovimo aukštis (maks.): 200 mm, pjovimo aukštis su įrėžėju (maks.): 200 mm, pjūklo disko skersmuo: 550 mm, stalo ilgis: 3 200 mm, bendras svoris: 1 280 kg, sukimosi greitis (min.): 2 800 aps./min, sukimosi greitis (maks.): 4 800 aps./min, galia: 7,5 kW (10,20 AG), Įranga: dozatorius, variklio stabdis, Heavy-duty panel saw with scoring unit and Siemens three-axis control system Suspended control panel with Siemens control and large 10" touchscreen display Control of saw blade height/tilt and positioning of the rip fence via the control panel Maximum cutting height 200 mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 rpm High own weight ensures vibration-free operation Large outrigger table with material roller Extendable aluminum longitudinal fence with three flip stops and digital position display Powerful 7.5 kW main motor mounted on a robust cast iron frame Four-way ball-bearing guided sliding table with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking positions on the sliding table Standard with table extension and table widening made of sheet steel Large swinging safety hood conveniently raised with a gas pressure spring Saw blade clamping via tool-free Rapid system The panel saw is set up in our demonstration center in Chemnitz. It is new and in unused condition. Hjdpfxjvmfawe Acuefn We are happy to assist with transport, installation, and commissioning.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 3 200 mm, pjovimo plotis (maks.): 1 300 mm, pjovimo plotis ties tiesiniu vedliu: 1 300 mm, pjovimo aukštis (maks.): 140 mm, pjūklo disko skersmuo: 400 mm, sukimosi greitis (min.): 3 500 aps./min, sukimosi greitis (maks.): 4 500 aps./min, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, pasukimo diapazonas: 45 °, Įranga: dozatorius, variklio stabdis, Heavy-duty panel saw with scorer unit and motorized saw blade adjustment Technical Description - Motorized saw blade tilt and height adjustment with digital display - Main saw blade with belt drive, speeds: 3500/4500 rpm - High own weight ensures vibration-free operation - Large outrigger table with material roller - Parallel fence with round bar guide and digital position display - Extendable aluminum rip fence with two flip stops - Powerful 7.5 kW main motor mounted on a robust cast iron frame - Four-way ball-bearing sliding table made of anodized aluminum with high torsional stiffness - Standard with table extension and width extension made from heavy-duty sheet metal - Large swing-away blade guard, easily raised via gas pressure spring - Rapid blade change system for quick and convenient saw blade replacement - Multiple locking positions on sliding table Dimensions and Weight Length approx.: 3386 mm Width/Depth approx.: 3600 mm Height approx.: 1310 mm Weight approx.: 850 kg Extraction Connection Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Power input: 7.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Noise Emission Sound pressure level: 96.5 dB(A) Saw Unit Cutting width with parallel fence: 1300 mm Max. cross-cutting width left of blade: 3200 mm Saw blade tilt: 90–45° Max. cutting height 90°: 140 mm Max. cutting height 45°: 100 mm Saw blade diameter: 400 mm Saw blade speed: 3500/4500 rpm Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 416 mm Sliding table height: 890 mm Table length: 1008 mm Table width: 554 mm Table height: 885 mm Scoring Unit Scorer blade diameter min.: 120 mm Hedpfx Acjwa I Upsujfn Scorer blade diameter max.: 125 mm Scorer blade speed: 8000 rpm #### For many years, we have maintained a partnership-based sales concept with specialist dealers. Therefore, in the event of an order, processing is carried out via a recommended partner, coordinated with you.####

Sąlyga: naujas, - new - Description: - Saw blade tilt and height adjustment is manual - Max. cutting height 200 mm - Scoring unit with separate drive motor - Main saw blade with belt drive and speeds 2800/3665/4800 rpm - High dead weight ensures vibration-free operation - Large outrigger table with material roller - Parallel fence with round bar guide - Extendable aluminium longitudinal fence with two flip stops - Powerful 7.5 kW main motor mounted on a robust cast iron frame - Four-point mounted sliding table with double roller carriage made of anodised aluminium offering high torsional rigidity - Multiple locking positions on sliding table - As standard with steel sheet table extension and width extension - Large swing-away pendulum guard conveniently raised with gas-spring assist - Saw blade clamping via tool-free rapid system Technical data: Dimensions and weights Length approx. 3386 mm Hfedpfxsvxr Rgs Acuon Height approx. 1330 mm Width/depth approx. 3703 mm Weight approx. 1102 kg Extraction connection Extraction port diameter 120 mm Extraction port diameter saw blade guard 80 mm Electrical data Connection voltage 400 V Input power 8.3 kW Motor speed 2800 rpm Mains frequency 50 Hz Output power 7.5 kW Sliding table and table Sliding table length 3200 mm Sliding table height 890 mm Table width 685 mm Sliding table width 416 mm Table length 1255 mm Table height 890 mm Noise emission Sound pressure level 96.5 dB(A) Circular saw unit Cutting width with parallel fence 1450 mm Saw blade tilt 90 – 45° Max. cutting height at 45° 140 mm Saw blade speed 2800/3665/4800 rpm Max. crosscut width to the left of saw blade 3200 mm Max. cutting height at 90° 200 mm Saw blade diameter 550 mm Scoring unit Scoring saw blade diameter 120 – 130 mm Scoring saw blade speed 8000 rpm Order No: 5200550

Sąlyga: naujas, Holzkraft FKS 550-3200 PRO Panel Saw 5200550 Heavy-duty panel saw with scoring unit Saw blade tilting and height adjustment is manual Max. cutting height: 200 mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 rpm High own weight ensures vibration-free operation Large outrigger table with material roller Parallel fence with round bar guide Extendable aluminium rip fence with two flip stops Hfedpfxekknaao Acuen Powerful 7.5 kW main motor mounted on a robust cast iron frame Quadruple-bearing sliding table made from anodised aluminium with high torsional rigidity Multi-position locking on the sliding table Standard with table extension and width extension made from heavy-gauge sheet steel Large swing-away blade guard easily lifted via gas strut Blade clamping via tool-free Rapid system TECHNICAL DATA: Dimensions and Weights Length (product): approx. 3386 mm Width/Depth (product): approx. 3703 mm Height (product): approx. 1330 mm Weight (net): approx. 1102 kg Dust Extraction Connection Extraction port diameter: 120 mm Extraction port diameter, blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Rated input: 7.5 kW Output: 6 kW Motor speed: 2800 rpm Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 416 mm Sliding table height: 890 mm Table length: 1255 mm Table width: 685 mm Noise Emission Sound pressure level: 96.5 dB(A) Sawing Unit Cutting width with parallel fence: 1450 mm Max. crosscut width left of saw blade: 3200 mm Saw blade tilting: 90 – 45° Max. cutting height at 90°: 200 mm Max. cutting height at 45°: 140 mm Saw blade diameter: 550 mm Saw blade speed: 2800/3665/4800 rpm Scoring Unit Scoring blade diameter: 120 – 130 mm Scoring blade speed: 8000 rpm Holzkraft Official Dealer - Accessories available on request!

Sąlyga: naujas, Gamybos metai: 2022, Naujas įrenginys Pagaminimo metai: 2022 Hfedpfsw I Utgsx Acujn Pakabinamas valdymo pultas su Siemens valdikliu ir 10" dideliu lietimui jautriu ekranu Pjūklo disko aukščio/posvyrio ir lygiagretaus atramos padėties valdymas per valdymo pultą Maks. pjovimo aukštis – 200 mm Įrengta priešpjaustymo sistema su atskiru varikliu Pagrindinis pjūklo diskas su diržine pavara ir apsukomis 2800/3665/4800 min¯¹ Didelis savasis svoris užtikrina be vibracijų veikimą Didelis atraminis stalas su medžiagos ritinėliu Ištraukiamas aliuminio išilginis atramos blokas su dviem lenkiamais ribotuvais ir skaitmeniniu padėties indikatoriumi 7,5 kW galingumo pagrindinis variklis sumontuotas ant tvirto ketaus rėmo Keturgubai guoliuoti formatinio stūmimo stalčiai iš anoduoto aliuminio, pasižymintys dideliu standumu Daugiataškis fiksavimas stumdomame stale Standartiškai komplektuojama su stalviršio išplėtimu ir prailginimu iš tvirtos skardos Didelė švytuoklinė apsauginė gaubtas patogiai pakeliama su dujinio strypo pagalba Disko keitimas naudojant įrankių nereikalaujančią Rapid sistemą Vieta: Hochheim Prieinamumas: greitai

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 3 200 mm, pjovimo plotis (maks.): 1 300 mm, pjovimo plotis ties tiesiniu vedliu: 1 300 mm, pjovimo aukštis (maks.): 115 mm, pjūklo disko skersmuo: 350 mm, aukščio reguliavimo tipas: mechaninis, sukimosi greitis (min.): 4 500 aps./min, sukimosi greitis (maks.): 4 500 aps./min, galia: 4,5 kW (6,12 AG), stalo ilgis: 3 200 mm, Įranga: dozatorius, variklio stabdis, Saw blade tilting and height adjustment are performed manually. High own weight ensures vibration-free operation. Large outrigger table with material roller. Rip fence with round bar guide. Extendable aluminium longitudinal fence with two flip stops. Powerful 7.5 kW main motor mounted on a robust cast iron frame. Quadruple ball bearing sliding table made of anodised aluminium with high torsional rigidity. Table extension and table enlargement made of heavy-duty sheet steel as standard. Large pendulum blade guard easily pivoted upwards via gas spring. Fast and convenient saw blade change thanks to rapid clamping system. Multiple locking positions on the sliding table. Dimensions: Length approx. 3386 mm Width/depth approx. 3600 mm Height approx. 1310 mm Weight approx. 800 kg Extraction connection: Extraction port diameter 120 mm Extraction port diameter (blade guard) 80 mm Electrical data: Rated power input 4.5 kW Hfodpfx Aswa I Ezocuen Connection voltage 400 V Mains frequency 50 Hz Noise emission: Sound pressure level 96.5 dB(A) Panel saw unit: Cutting width with rip fence 1300 mm Max. crosscut width left of saw blade 3200 mm Saw blade tilting 90–45° Max. cutting height at 90°: 115 mm Max. cutting height at 45°: 80 mm Saw blade diameter 350 mm Saw blade speed 4500 rpm Sliding table and table: Panel sliding table length 3200 mm Panel sliding table width 416 mm Panel sliding table height 890 mm Table length 1008 mm Table width 554 mm Table height 885 mm Scoring unit: Scoring blade diameter min. 120 mm Scoring blade diameter max. 125 mm Scoring blade speed 8000 rpm For many years, we have maintained a cooperative sales model with specialised dealers. Therefore, in the event of an order, the transaction will be handled by a recommended partner in consultation with you.

Sąlyga: naujas, - new - with swiveling sanding unit and oscillating sanding belt, F version for veneer sanding Description: - Sanding unit swivels up to 45° via lever - The machine stand is made of welded steel, ensuring high torsional rigidity and vibration-free operation. - Oscillating sanding belt driven by a separate gear motor for improved sanding results - Oscillation can be switched on or off as required - Sanding shoe with graphite coating for increased belt service life - Height-adjustable sanding table to utilize the full sanding belt width - Height-adjustable auxiliary table with extraction for sanding radii - Spring-loaded belt tension automatically compensates for belt length differences - With double extraction ports - Extendable roller table extension - With rubber-coated sanding drum - Veneer edge sanding attachment with contact shoe, fine adjustment, support rollers, and stop rulers - With grooved infeed ruler for veneer overhang - Quick switching from veneer edge to solid wood sanding possible Technical Data: Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Extraction Connection Extraction port diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Work Table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Longitudinal table height adjustment 230 mm Cross table min. height 720 mm Hsdpfx Acevwgbweuefn Electrical Data Connection voltage 400 V Mains frequency 50 Hz Sanding Unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Item no. 5363001