Mobilus švaraus oro įrenginys

Holzkraft RLA 160

Būklė: naujas, Gamybos metai: 2025, Clean Air Dust Extractor RLA 160 Holzkraft For wood dust and chips, designed for commercial use Item number: 5131620 Brand: Holzkraft Chip Collection Volume: 2 x 165 l Outside Diameter of Extraction Port (Inlet): 160 mm Length approx.: 1,755 mm Width/Depth approx.: 830 mm Height approx.: 1,654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Mains Frequency: 50 Hz Filter Filter Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Airflow Rated Airflow: 1,448 m³/h Dust Class: H3 Scope of Delivery: Metal Impeller Fan Inspection Opening for Cleaning the Bypass Filter 5 m Connection Cable with 5-pin CEE Plug and Phase Reverser Two Fixed and Two Swivel Castors with Locking Brakes Manual Filter Cleaning Item No. 5131620 Location: ex stock 54634 Bitburg - Available immediately - Ljdpohkzttsfx Alrsad

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG Ljdpjrigxyjfx Alread - Machine length: 415 cm - Machine inspected and in original condition

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Lodpfxedqzcxo Alrjad Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2026, A550 Pilarka Do Drewna Litego, W pełni Automatyczna, 9 m W pełni automatyczne cięcie drewna średniej i dużej wielkości dzięki prostemu w obsłudze systemowi automatyzacji. Umieść dowolny element drewna, a maszyna automatycznie wykryje go i przytnie zgodnie ze zleconymi wymiarami, z użyciem napędu serwo zapewniającego precyzyjne pozycjonowanie materiału. Import list zleceń poprzez WIFI usprawnia szybkie wprowadzanie dużych zleceń cięć z plików Excel. Opcjonalnie pilarka A550 może być wyposażona w funkcję optymalizera. Każdy kawałek drewna, który zostanie położony na podajniku, niezależnie od jego długości, jest automatycznie mierzony przez czujnik laserowy. Zaawansowany algorytm optymalizujący analizuje listę cięć i wyznacza najlepszy porządek wycinania elementów, tak aby maksymalnie ograniczyć odpady. Wszystko to odbywa się w czasie rzeczywistym, podczas pracy maszyny, bez dodatkowych działań operatora. • W pełni automatyczna praca – automatyczne podawanie drewna i cięcie na zadane długości. • Intuicyjny interfejs użytkownika; szybkie wprowadzanie zleceń i rozpoczęcie cięcia. • Obsługa prostych elementów, całych partii oraz dużych list cięć z plików Excel. • Możliwość cięcia i zliczania kilku sztang/bel jednocześnie. • Zdalne wprowadzanie zleceń (Excel) przez WIFI z rozbudowanymi opcjami mapowania danych. • Regulowana prędkość podawania drewna i cięcia dla maksymalnej wydajności procesu. • Automatyczny druk etykiet dla elementów na podstawie danych ze zlecenia (naklejanie ręczne, opcjonalnie). • Bezpośredni druk na materiale w linii produkcyjnej, bez udziału operatora (opcja). • Obsługa kodów kreskowych/QR do wprowadzania zleceń lub ich drukowania (opcja). • Automatyczne ustawianie kąta cięcia piły w zakresie ±75° za pomocą serwomechanizmu (opcja). Idealna do zastosowań: • Produkcja konstrukcji ramowych i dachowych • Produkcja domków i schowków ogrodowych • Produkcja mebli z litego drewna Laodpfx Aof Ekngolrsd • Produkcja elementów ciesielskich z cięciem pod kątem • Cięcie dużych ilości drewna Model: A550 Długość całkowita: 9 m Długość obrabianego materiału: 8580 mm Wydajność załadunku/popychania: 20 – 40 kg Oprogramowanie: Optymalizator AUSTRALIJSKIE MASZYNY NAJWYŻSZEJ JAKOŚCI.

Būklė: naudotas, Gamybos metai: 2010, Stumdomas vežimėlis: 3000 mm CNC lygiagretus atmušas, pjovimo plotis 1000 mm Variklis: 5,5 kW elektros variklis Elektrinis aukščio ir posvyrio reguliavimas Posvyrio kampas: 0,5–47° Posvyrio ir pjovimo aukščio skaitmeninis indikatorius Pjūklo disko skersmuo: maks. 550 mm Didžiausias pjovimo aukštis: 200 mm Paruošta išankstiniam pjovikliui Valdymo pultas akių lygyje, pasukamas Priekinis stalas, pasukamas Stalo ilgintuvas 840 mm Kampinis-pjūvio atmušas 3200 mm Skaitmeninis L Sandėliavimo vieta: tiekėjas Ledpfx Aezccg Delrjad

Būklė: naudotas, Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 116387, obliavimo aukštis: 160 mm, obliavimo plotis: 260 mm, bendras plotis: 145 mm, bendras aukštis: 170 mm, bendras ilgis: 375 mm, ruošinio svoris (maks.): 2 100 kg, ruošinio aukštis (maks.): 160 mm, suslėgto oro jungtis: 8 juosta, įvesties srovės tipas: trifazis, ruošinio plotis (maks.): 260 mm, įėjimo įtampa: 400 V, stalo ilgis: 2 500 mm, ašies skaičius: 4, ištraukimo jungties skersmuo: 250 mm, galia: 18 kW (24,47 AG), įėjimo dažnis: 50 Hz, įėjimo srovė: 63 A, Įranga: variklio stabdis, Parduodama Weinig Cube 4-pusė obliavimo staklė. Parduodama, nes beveik nenaudota mūsų dirbtuvėse. Pirkta iš De Groot Bewerkingmachines ir visada ten prižiūrėta. Veikia be priekaištų. Šiuo metu staklės atjungtos ir supakuotos, tačiau esant rimtam susidomėjimui galima parodyti veikiančias. Pagaminimo metai: 2011 Svoris: 2100 kg Prijungimo galia: 400V 63A Darbinis oro slėgis: 8 bar Galia: 18 kW (25 AG) Nusiurbimo jungtis: 250 mm 1x Maksimali obliavimo plotis: 260 mm Maksimali obliavimo aukštis: 160 mm Laedoxhcizjpfx Alrod Minimali obliavimo ilgis: apie 400 mm Įvado stalo ilgis: 2500 mm Visi parametrai nustatomi per jutiklinį ekraną Nusidevėjimo indikacija lazerinėmis linijomis Bendras staklių ilgis: 375 cm Bendras staklių plotis: 145 cm Bendras staklių aukštis: 170 cm Į komplektą įeina obliavimo velenai su peiliais. Tai kokybiška staklė.

Būklė: naujas, Gamybos metai: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine tilts via handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Ljdpfx Aji Dfidjlroad Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta switch Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to one side to approx. 25° for sharp angles, and tilted flat to the left up to 30° Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, cast-iron milling unit mounted directly to the table Under-table extraction hood for improved dust extraction Solid and precise cast iron table Fast and straightforward speed change Powerful 5.0 kW motor Standard curved milling guard Quality made in Italy Equipment Details Cast iron milling unit Directly mounted onto the milling table Milling spindle mounted with high-precision ball bearings in the upper position for minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Ledshp Rcrepfx Alroad Powerful Motors Equipped with a high-performance three-phase motor Milling Guard The standard milling guard is supplied as standard for maximum safety, featuring a height-adjustable fence and protective cover. Milling Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw The integrated extraction port ensures an unobstructed view Milling Table Opening A large table opening allows the use of larger panel cutters, tenoning, and slotting tools above and below the table Curved Milling Guard Included as standard Reversible Fence Jaws Versatile, integrated fence to bridge the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and Weight Weight (net) approx. 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation Information Required length: 1,945 mm Machine body width/depth: 575 mm Required width/depth: 920 mm Working area length: 1,600 mm Explanation required space: The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Explanation working area: Please add the specified dimensions to the required space to calculate the recommended free setup area for the machine. Electrical Data Supply voltage: 400 V Drive motor power: 5.0 kW Mains frequency: 50 Hz Milling Spindle Usable spindle length: 100 mm Spindle speeds: 3,500/7,000/10,000 rpm Max. spindle protrusion above table: 130 mm Spindle shaft diameter: 30 mm Max. milling tool diameter Max. sinkable tool diameter: 180 mm SCOPE OF DELIVERY Curved milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, minimax ti 55es LL – Spindle Moulder Image shows T 55 i elite s standard version Professional workshop machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension grey cast iron milling unit, tiltable up to -45° to the rear. Spindle speeds displayed via LEDs. Quick and easy speed change via eccentric clamping. Reversible direction of rotation (right/left). Height and tilt display accurate to 1/10 mm. Heavy-duty industrial fence: with rack-and-pinion fine adjustment, digital display, aluminium fence jaws, 3-position repeat setting for quick adjustment. Scope of delivery: Laodedqzh Ropfx Alrsd Aluminium fence jaws Curved milling protection hood Table extensions left and right Model: minimax ti 55es LL Article No.: 5502252 Technical data: Worktable dimensions: 2500 x 655 mm Sliding table dimensions: — Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench Lajdpfxjqlckpj Alrjd 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -