Plačios obliavimo staklės

Martin T45 - sofort verfügbar -

Sąlyga: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease Giodpfx Abeqlck Nedel 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and joiners The especially long one-piece planer tables ensure easy planing of workpieces Work tables are made of cast iron, making them resistant and permanently flat Rearward, simultaneously opening planing tables with spring support for fast and convenient conversion Thanks to the fixed-mounted extraction hood, no need to reconnect the extraction hose when converting, saving valuable working time Helically grooved steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknessing exit ensures smooth wood extraction Material feed with four selectable speeds Thicknessing table adjustment via handwheel with integrated thickness height display DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator’s position Powerful industrial motor High machine weight guarantees top precision and smooth operation Prepared for slot mortising unit Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer (Jointer) Total table length: 2250 mm Max. planing depth: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust extraction connection Thicknesser extraction port diameter: 1 x 120 mm Drive power Main motor: 7 kW Installation information Required space length: 2250 mm Required space width/depth: 1440 mm Explanation required space: The dimensions take into account maximum traverses or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. planing depth: 5 mm Electrical data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Gijdpfxoff Hdpj Abdsl Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Sąlyga: naujas, Gamybos metai: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers ideal conditions for modern production: it delivers cleanly planed surfaces, is quick and easy to operate, and is exceptionally quiet in operation. The standard electronic control unit makes setting the planing height very simple, with 99 storable planing dimensions for perfect results from the first workpiece. The thickness table can be easily moved by pressing a button, or adjusted upwards in 0.1 mm increments. All feed speed controls are within comfortable reach. The heavy, vibration-damping composite frame combined with the high-quality cutterblock bearings ensures excellent surface results. Thanks to the sound-insulating construction, quiet operation is guaranteed even in standard configuration. Gisdpoqlclbjfx Abdjl • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Cutterblock speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; pushbuttons for manual coarse and fine adjustment of planing thickness with digital display, start/stop button for cutterblock, integrated hour counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; includes block locking for easy knife change • Thicknessing table: Electric height adjustment with fine adjustment, feed speed 10 mm/s, securely mounted on four support spindles, precision-ground table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, easy roller change; infeed sectional pressure bar • Extraction: Pivoting, split chip extraction hood with 160 mm port, can be connected left or right side (both sides possible on request); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication rail for oil-lubricated points; cutterblock and bearing lubrication via grease nipples • Accessories: 1 grease gun filled with long-life grease, 1 oil gun, 1 open-ended wrench, 1 knife-changing tool, 1 pair of blank knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emissions data: Sound pressure level at operator’s position LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Briquetting press machine, automatic, hydraulic model POR STANDARD Used machine Condition: Excellent Gisdsw E Iyijpfx Abdel Briquette cutting system Hydraulic machine CE marking: Yes Hourly output: 60 / 90 kg/h Hydraulic pump motor: 7.5 HP Briquette diameter: 65 mm Maximum briquette length: 50–300 mm Voltage: 380V / 50 Hz Net weight: 800 kg Overall dimensions: 195 x 110 x 150 cm (H)

Sąlyga: naujas, mit Hobelwelle Giedpfx Abed H Sc Eodjl Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung 1. Aggregat: 22 kW Motorleistung 2. Aggregat: 30 kW Motorleistung 3. Aggregat: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Betriebsdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportabmessungen: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Μηχανή επικόλλησης ακμών Hebrock F5 με σύστημα ελέγχου PLC, καζάνι ταχείας θέρμανσης με επικάλυψη, χωρίς απαιτήσεις συντήρησης, με προκαταρκτική ρύθμιση για γρήγορη αλλαγή του δοχείου κόλλας. - Οθόνη αφής 10" - Μέγιστο πάχος ακμής 3mm - Ελάχιστο μήκος τεμαχίου 160mm - Ταχύτητα προώθησης 7m/min - Έτοιμη για λειτουργία σε περίπου 3,5 λεπτά - Μέγιστη κατανάλωση ισχύος 7,4kW - Ηλεκτρική σύνδεση 400V/3φ/50Hz - Ύψος τραπεζιού 900mm - Διαστάσεις μηχανήματος 4300x1300x1400 mm - Βάρος περίπου 900Kg Εξτρα εξοπλισμός • Κεφαλή προ-φρεζαρίσματος Whispercut, ύψος τεμαχίου 50mm • Κεφαλή συνδυασμένης κοπής • Ακτίνα για στρογγύλεμα γωνιών R = 2mm • Στρογγύλεμα γωνιών ακτίνας R = 2mm • Συσκευή ταχείας αλλαγής για μοτέρ στρογγυλοποίησης γωνιών • Ξέστρο πολλαπλών ακτίνων R2/R1 • Μονάδα ψεκασμού διαχωριστικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού • Ψεκασμός προστασίας ακμών • Υποδοχή για φρεζαριστική μονάδα και ξέστρο προφίλ ακτίνας Gisdpfx Aewyu Rwebdsl • Πνευματική ρύθμιση 3 σημείων • Πολυεργαλείο (R2/R1/λοξογωνιά) • Εσωτερικός φωτισμός LED

Sąlyga: naujas, Gamybos metai: 2025, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly achieve perfect foundations. The T54 was designed precisely with this goal in mind. It allows you to joint workpieces easily and accurately at the most modern level, and reliably equip them with precise angled edges. The machine comes standard with a TERSA solid steel cutter block. The Xplane cutter block with shear cut motion is available as an optional feature. Chamfering is effortless, thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The robust cast iron tables of the T54 provide a secure support even for large, heavy workpieces. If you require additional table length, both the infeed and outfeed tables can each be extended by 380 mm—also made of cast iron, of course. Technical Data - Table width: 500 mm - Table length: 2840 mm - Maximum cutting depth: 8 mm - Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 - Speed: 5000 rpm - Motor power: 5.5 kW - Fence adjustable up to 45° - Auxiliary fence for small workpieces - Electric table adjustment Equipment: - T 54 Gisdpfspq If Dex Abdjl - T 5462-a Suvamatic - T5406/3-a Xplane solid steel cutter block with 3 spiral knife rows (each row with 26 convex carbide knives; 2 counter-knives), delivered including full knife set and a T-wrench Torx T20; spindle speed 6,000 rpm included. - The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2024/121/47, pjūklo disko skersmuo: 420 mm, GRAULE Crosscut and Mitre Circular Saw Model ZS 170 N (tiltable) 400 Volt three-phase brake motor, 2.2 kW Saw blade diameter: 420 mm Gsdpfx Abetwz Tlodsil Blade bore: 40 mm Cutting height: 170 mm Blade tilted to 45°: cutting height 115 mm, cutting length 410 mm Including the following accessories: 1 pc. machine, tiltable on both sides via hand crank from the rear, from 90° to 45° left and approx. 30° to about 60° right 1 pc. HM circular saw blade 420x3.4/2.4x30 mm, 48 teeth, negative rake, for wood 1 pc. machine stand

Gamybos metai: 2022, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Lauber wood dryer with longitudinal ventilation Chamber with stacking trolley Net volume 7.2 m³ with wood temperature measuring point -> new / unused / original packaging -> immediately available (standard delivery time approx. 9 months) -> see detailed description in the photos -> collection, loading, etc. to be arranged by the buyer -> transport, customs clearance, and insurance to be arranged by the buyer Godemidtrepfx Abdeil

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Jointer table length: 2720 mm Jointer table adjustment: Lever Concave/convex joint adjustment: No Display for chip removal: Scale Gjdpfx Asgr Udvsbdsil Display for concave/convex jointing: - Adjustable fence angle: Yes Motor power: 7 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 870 kg