Pločio obliavimo staklės pirkti naudotą (29)

Būklė: labai geros būklės (naudotas), Catalog number 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - toothed feed roller - return pawls - 2 pressure rollers - toothed feed roller - pressure roller - planing shaft 610 mm, 4-knife, 7.5 kW - pressure rollers - smooth feed roller From below: - guide rail - adjustable infeed table with smooth, split sliding roller - planing shaft 610 mm, 4-knife, 5.5 kW - 2 smooth sliding feed rollers - side pressure roller From the rear: - side spindles + 2 pressure rollers: 1) right vertical 5.5 kW 2) left vertical 5 kW - Max. planing height on side spindles: 200 mm Lrjdpfeytdkxex Am Hok - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) additional horizontal spindle 160 mm, adjustable up/down, left/right, and angle, approx. 4 kW - Option to plane with the additional spindle from above/below/side - Spindle diameter 35 mm - Adjustable rollers in the lower table - 2 feed speed levels - Feed motor 2.2 kW - Extraction port diameter 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Weight approx. 3000 kg ADVANTAGES - Wide planer for wet and dry wood - Ideal for processing beams, flooring, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Cutter heads included - Manufactured by German brand KUPFERMUHLE - Used planer, very good condition Original photos Net price: 58,900 PLN Net price: 14,020 EUR (exchange rate: 4.2 EUR) (Prices are subject to change due to exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7503 TECHNICAL DATA: - Max planing width: 610 mm - Max planing height (two-sided): 200 mm - Max planing height (four-sided): 100 mm Top side: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed drive shaft - Pawls - Pressure unit - 2 toothed drive shafts - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Smooth metal feed roller - Pressure unit - Profiling shaft, 7.5 kW - Pressure unit - Rubber feed roller Bottom side: - Planing shaft, spindle diameter 35 mm, shaft length 130 mm, 2.2 kW - 2 guide bars - Infeed table - Smooth drive shaft - 610 mm planing shaft, 4-knife (currently equipped with 2 knives), 7.5 kW - 2 smooth drive shafts - Split metal sliding roller - Side pressure Lsdpfx Aoyz Sfbem Hsrk Rear side: - Side spindles with 2 pressure units - 1) Right vertical spindle 95 mm, 4 kW - 2) Left vertical spindle 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Extraction ports diameters: 3×120 mm, 3×160 mm - Dimensions (L/W/H): 3150 x 1900 x 1600 mm - Weight approx. 3500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing logs, flooring, etc. – Additional profiling shaft and planing shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, in very good condition Net price: 66,900 PLN Net price: 15,930 EUR (based on 4.2 EUR exchange rate) (Prices may vary with exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1994, Four-sided planer, 8-head HARBS. Long infeed table: 3 meters. Machine weight: 5,500 kg. Cardan drive. Head configuration: bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal, top horizontal. Motors: 5.5 kW and 7.5 kW. Planing width: 230 mm. Planing height: 160 mm. Lredpfx Asl Dw Nxom Hjk

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Two-Sided Wide Planer Maximum planing width: 400 mm Maximum planing height: 200 mm Heavy-duty cardan feed Lredpfxey Dpmus Am Hsk Feed belt with spike profile ensures precision feed accuracy, especially with warped or bent timber. Electronic height adjustment Spiral cutter heads (top and bottom) Latest IE-3 motors Braked motors and feed CE certified

Būklė: naudotas, Gamintojas: Rex Modelis: RVF 761 Būklė: Naudotas Serijos numeris: 7611040927 Atsargų numeris: 3364 Lrodpjy Enxxjfx Am Hjk Piltuvas: 250 litrų Siurblio našumas: maks. 6100 kg/val. Užpildymo slėgis: maks. 70 bar Darbo valandos: 19648 Galia: 3 x 400V, 50Hz, 15kW Matmenys: 2320 x 1440 x 3035 mm Svoris: 1100 kg Pildymas, porcijavimas ir susukimas Komplektuojama su susukimo įrenginiu ir DHG400 žarnų laikikliu Su keltuvu 200 L standartiniams vežimėliams

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 600 mm, bendras svoris: 3 000 kg, Keturių pusių oblius Gamintojas: Kupfermühle Tipas: Vuin 605 Obliavimo plotis: 600 mm Maksimalus obliavimo aukštis: 200 mm Stalas reguliuojamo aukščio Padavimo greitis laipsniškai reguliuojamas Lrsdpsy At D Ujfx Am Hjk 2 ištraukimo volai Darbinė įtampa: 380 V Valdymo įtampa: 220 V Dažnis: 50 Hz Bendra darbinė srovė: 60 A Bendra valdymo srovė: 6 A Transportavimo matmenys: Staklės apie 2000 x 1800 x 1800 mm + priedų paletė 1200 x 800 x 500 mm Bendras svoris apie 3000 kg

Būklė: naudotas, Gamybos metai: 1996, Kaina: pagal užklausimą Dvipusis oblius REX HOMS 630 Serijos numeris: 16831 380 V, 102,6 A, 67,5 AG Įrengta su 3 obliavimo velenais 1. apatinis 15 kW 2. apatinis 11 kW 3. viršutinis daugiau nei 18,5 kW Maksimali obliavimo plotis: 630 mm Min.-maks. obliavimo aukštis: 10–310 mm Maks. drožlių pašalinimas viršutiniu velenu: 15 mm Maks. drožlių pašalinimas apatiniu velenu: 10 mm Lsdpfowng Ikjx Am Hsrk - Pagaminimo metai: 1996 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir keitimas galimi bet kuriuo metu dėl bet kokios pramoninės įrangos Yorick Diebels

Būklė: naudotas, Gamybos metai: 1972, Tuščiasvoris: 3 000 kg Matmenys (I x P x A): 180 x 170 x 200 cm Keturių pusių obliavimo staklės Küpfermühle 600 Ledpfxswnhbxs Am Herk Obliavimo plotis: 600 mm Obliavimo aukštis: 190 mm Kampinis apatinis peilių velenas 9 kW Viršutinis nuožulnus peilių velenas 11 kW Dešinė vertikali ašis 4 kW Kairė vertikali ašis 5,5 kW Matmenys apie 1800 x 2000 x 1700 mm (I x P x A), svoris 3000 kg - Gamybos metai: 1972 - Dokumentacija: nėra - CE sertifikatas: nėra - Serijos numeris: 9552 - Transportavimo matmenys: 1800 mm x 1700 mm x 2000 mm (I x P x A) - Transportavimo svoris [kg]: 3000 kg Finansinė informacija PVM: nurodyta kaina be PVM PVM/Skirtuminis apmokestinimas: PVM atskaitomas verslui Pristatymas ir išpirkimas galimi bet kuriuo metu visam pramonės sektoriui Yorick Diebels

Būklė: naudotas, Savaiminis svoris: 6 000 kg Matmenys (I x P x A): 340 x 210 x 190 cm Kaina: pagal užklausą - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Maks. darbinis plotis: 860 - Transportavimo matmenys: 3400 mm x 2100 mm x 1900 mm (i x p x a) - Transportavimo svoris [kg]: 6000 kg - Transportavimo pakuotės [vnt.]: 3 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir keitimas galimi bet kuriuo metu visiems pramonės sektoriaus įrenginiams Lredpfexbf Iaox Am Hsk Yorick Diebels

Būklė: naudotas, Svoris be krovinio: 1.500 kg Matmenys (I x P x A): 150 x 140 x 150 cm Dvipusis obliavimo staklės Lodpfx Aswnhhxsm Hork MIC AM2 Maksimalus darbinis plotis: 510 mm Voleliai aukštyn ir žemyn 2 peiliai kiekvienai obliavimo galvai - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Serijos numeris: 1652.75 - Transportavimo matmenys: 1500 mm x 1400 mm x 1500 mm (i x p x a) - Transportavimo svoris [kg]: 1500 kg - Transporto paketų skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir senos technikos priėmimas galimi bet kuriuo metu iš pramonės sektoriaus Yorick Diebels

Būklė: naudotas, Dvipusis obliavimo staklės Fischer HMB-85 Didžiausias darbinis plotis: 850 mm Didžiausias darbinis aukštis: 240 mm Viršuje ir apačioje padavimo volai 1 ašis; apačioje; grioveliuotas velenas, 5,5 kW variklis 2 ašis; apačioje; lygus velenas, 15 kW 3 ašis; viršuje; lygus velenas, 15 kW Su grioveliuotu stalu! - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Variklis su stabdžiu: Ne Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir keitimas visada galimi visoms pramonės sritims skirtoms prekėms. Lredpfewnhhrsx Am Hek Yorick Diebels

Būklė: naudotas, Platus obliavimo staklės 2 arba 4 pusių versijoje, įskaitant besisukantį stalą, REX HOMS, didžiausias darbinis plotis – 2050 mm, didžiausias darbinis aukštis – 310 mm. Lrodeyid Uyspfx Am Hjk

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 620 mm, obliavimo aukštis: 300 mm, darbinis plotis: 600 mm, REX SUPERMASTER Year 2003 – SUMA-8/63.WW Machine Number: 22,500 Year of Manufacture: 2003 General Data Machine Type: Planing and profiling machine with chamfering units Total Connected Load: approx. 222.8 kW Feed Speed: 10 – 100 m/min (adjustable, frequency-controlled) Heavy-Duty Outfeed Unit (AZG): 4 rollers, pneumatic roller pressure, cardan drive shafts Tools / Units • Planing spindles: Bottom planing spindle: 37 kW Top working spindle: 45 kW Right working spindle: 22 kW Left working spindle: 22 kW Lrsdpfx Ajymgxxjm Hok • Chamfering units: 4 × chamfering units (AFVo / AFVu, left/right, top/bottom) – 1.85 kW each Speed: approx. 5,600 rpm, height-adjustable to set chamfer width Total Number of Processing Tools: 8 (4 planing/working spindles + 4 chamfering units) Drives Feed unit: approx. 32 kW • Additional motors (separate): Height adjustment (thickness) Width adjustment Chip removal adjustment Machine adjustment Extraction System Individual extraction nozzles Ø 160–200 mm depending on the unit Total required extraction capacity: approx. 25,350 m³/h Accessories Various planing heads and tools (see photographic documentation attached) Control cabinet included The SUPERMASTER series delivers optimal results in the production of high-quality structural timber products such as solid structural timber (KVH), Duo/Trio beams, or laminated veneer lumber (glulam). The machines in the SUPERMASTER series are also used in the production of cross-laminated timber (CLT). Thanks to the robust feed system, large, heavy, wet, frozen as well as small, fine workpieces present no challenge for the SUPERMASTER.

Būklė: naujas, Gamybos metai: 2021, V-hold czterostronna strugarka pięciowrzecionowa, model VH-M 521 - szerokość obrabianego materiału od 20 do 210 mm - wysokość obrabianego materiału od 8 do 160 mm 1. wrzeciono od dołu – 7,5 kW 2. wrzeciono z prawej – 7,5 kW 3. wrzeciono z lewej – 7,5 kW 4. wrzeciono od góry – 11 kW Lrsdpfx Amohq Rp Ho Hok 5. wrzeciono od dołu – 7,5 kW - posuw 5,5 kW, zakres od 6 do 36 m/min - obroty 6500 obr./min - średnica wrzecion 40 mm - posuw dla krótkich elementów, naprzeciwko wrzeciona prawego - docisk przed i za wrzecionem górnym - ręczna pompka do smarowania stołu - masa maszyny 3100 kg Dostępna od ręki

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 300 mm, ašies skaičius: 10, Nėra minimalaus kainos – garantuotas pardavimas už didžiausią pasiūlytą sumą! Įrenginys gali būti naudojamas atskirai arba kaip dalis visos linijos: Lrsdpfsyk Tvljx Am Hek - Joulin vakuuminis keltuvas + užkrovimo ir padavimo sistema (paieškos ID: 21264612) - Kanali ML 1100 TWIN F.L. 30 H.S. juostinis atskyrimo pjūklas (paieškos ID: 21264817) TECHNINIAI DUOMENYS Darbinis plotis: 300 mm Padavimo greitis: 140 m/min iki 200 m/min ĮRENGINIO DUOMENYS Velenų konfigūracija: Velenas horizontalus Dešinysis kėlimo velenas, vertikalus Kairysis kėlimo velenas, vertikalus Kėlimo velenas horizontalus Dešinysis kėlimo velenas, vertikalus Kairysis kėlimo velenas, vertikalus Viršutinis velenas, horizontalus Apatinis velenas, horizontalus Apatinis velenas, horizontalus Obliavimo velenas apačioje, horizontalus ĮRANGOS SAVYBĖS 10 velenų Daugiafunkcis kėlimo velenų sistema NC valdymas Visi velenai su atraminiais guoliais (hidraulinis tvirtinimas) Obliavimo stalas Tikslus matavimas ir kampinis darbų tikslumas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Steton four-side planer with 5 heads. Steton four-side planer with 5 heads. The machine has been serviced and requires no additional investment. Ljdoi Apuhjpfx Am Herk Technical data: - Maximum width of workpiece: 23 cm - Maximum height: 13 cm - Spindle diameter: 40 mm - 1 – Bottom horizontal: 23 cm - 2 – Right vertical: 13 cm - 3 – Left vertical: 13 cm - 4 – Top horizontal: 23 cm - 5 – Universal noise-insulated enclosure, 360 degrees - Electrically adjustable planing thickness - Two feed speeds

Būklė: naudotas, Transversal shifting subframe for planing machine Ledpfx Aeimz Egom Hork Enables the planing machine to be moved laterally so that the cutter heads can be used across their entire length while maintaining the zero line. REX planing machine transverse adjustment Dimensions: Length 2850 mm / Width 2600 mm / Height 250 mm + support 215 mm

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Kupfermühle KH 30 4-sided Planing Machine with additional unit - horizontal working spindle with outfeed unit 4-sided universal planer KUPFERMÜHLE Electrics: 400 Volt / 50 Hz ...../58.5 kW Original paint finish still Reseda Green RAL 6011 Motor power & arrangement in kW: bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th shaft bottom 11.0 / feed 7.5 / thicknessing 3.0 Feed speed min/max: 5 – 30 m/min Working spindles: 5 units Extraction/Connection diameters: bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Working width min/max: 30 mm / 310 mm Working height min/max (2-sided): 15 mm / 300 mm Working height min/max (4-sided): 15 mm / 180 mm (OPTION 250 or 300 mm possible) Key features: - Constant table height - Guide fence on the RIGHT - Interchangeable planer heads - Jointing device bottom and top - Table plates slotted for sound insulation and replaceable - Outfeed unit with 2 driven rollers on top and double-sided guide on top section - Height adjustment synchronized with base machine Machine in repaired and tested condition with functional guarantee. Lodpfx Amsx Ehfce Hjrk Further options: Repainting Paint refinishing General overhaul etc. etc.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Double-sided wide planing machine Maximum planing width: 610 mm Maximum planing height: 200 mm Heavy-duty cardan feed Feed belt with spike profile enables precision feeding accuracy, especially with warped or bent wood. Lsdpfex Upt Aex Am Herk Electronic height adjustment Spiral cutterheads top and bottom Latest IE-3 energy-efficient motors Braked motors and feed unit CE compliant

Būklė: geras (naudotas), Išankstinis obliavimas Stalo ilgis: 1.500 mm Stalo plotis: 760 mm Variklis: 4,0 kW (iš pradžių skirtas REX HOMS 760) Maksimalus drožlių nuėmimas pirminio obliavimo peilio velenu: 10 mm Peilio veleno greitis VA D=140 mm, Z4: apie 4.200 aps./min. Nusiurbimo jungtis D=140 mm Ledpfx Amsimz D Uo Hsrk Būklė: patikrintas, veikiantis Naujos REX kaina apie 20.000 €

Būklė: geras (naudotas), Gamybos metai: 1975, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 860 mm, obliavimo aukštis: 310 mm, darbinis plotis: 860 mm, darbinio aukščio: 750 mm, drožlių pašalinimas: 20 mm, sukimosi greitis (maks.): 4 200 aps./min, obliavimo peilių skaičius: 4, sunki storio obliavimo staklės, labai tinka statybinei medienai ir pan., pastovi stalo aukštis, stabilus ritininis konvejeris su pavara įvado zonoje, stabilus ritininis konvejeris be pavaros išvado zonoje Lrsdpoxfl A Sjfx Am Hek

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed Lrjdpfxoqlck No Am Hsk • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm Lrodoqlckpepfx Am Hsk • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Būklė: beveik kaip naujas (parodų įrenginys), padavimo ilgis X ašis: 800 mm, obliavimo plotis: 800 mm, Dvipusė obliavimo staklės. Labai gera darbo būklė. Ledpfx Amsx Rryke Hsrk

Gamybos metai: 1996, būklė: naudotas, Planer machine Rex Homs 310 Lrjdpfx Amechrgrs Hek With scoring saw from below Planer heads above and below Planing width 310 mm Without feed unit. The feed unit was previously provided by the continuous press of the galvanizing system.