Plačios obliavimo staklės

V-HOLD lidermac reignmac VH-M 521

Būklė: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Cgedpfx Aaew Sy T Hohjp Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Būklė: geras (naudotas), Gamybos metai: 1990, RANDEK SP700 Crosscut Saw Manufactured by Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series by Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and highly accurate. It has been on the market for a long time and is continually improved based on close cooperation with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all required cuts. The large saw blade diameter (700 mm) enables you to cut multiple pieces from wood stacks simultaneously. Cjdpsh Ayyqefx Aahegp - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Timber clamping near the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Discharge roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to change/errors excepted

Būklė: naudotas, Four-sided planer REX, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles with 2 rotational speeds, electric table lifting device. Cgjdpsrxf Smsfx Aahop

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, stalo plotis: 300 mm, pjovimo aukštis su įrėžėju (maks.): 100 mm, frezos veleno ilgis: 250 mm, Equipment: - 1 GRECON feeding transfer system with accumulation for 4 to 5 purged boards of varying lengths for finger-jointing - 1 GRECON double finger-jointer for deep joints (for glulam beam production) - 1 180° transfer with two-component glue application - 1 GRECON finger-jointing press - 1 cross-cut saw with CNC control - 1 outfeed table Cgedpfx Aaswz H Anohop

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig Cgsdpfxjrigxye Aahsp - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), Four-side planer Codpfx Aohlp D Neahjgp - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead transfer rollers in front of the bottom head, plus a roller device for short elements - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Būklė: naudotas, Gamybos metai: 2004, WEINIG GRECON FINGER JOINT LINE DOUBLE END MODEL PJ 150/500 – CE – USED - Infeed wood length: 150 – 700 mm - Wood width: 40 – 150 mm - Wood thickness: 18 – 80 mm - Press length: 6100 mm - Pressing force: 120 kN Cgsdpfx Aaowry I Ejhop - Milling motor: 15 kW - Scoring unit: 5.5 kW - Year: 2004 CE

Būklė: labai geros būklės (naudotas), Four-Side Planer Weinig Unimat 23 EL Working width: 230 mm Working height: 160 mm Spindle arrangement: Bottom – 5.5 kW Right – 4 kW Left – 5.5 kW Right – 4 kW Top – 11 kW Bottom – 5.5 kW Top – 7.5 kW Bottom – 7.5 kW Feed speed adjustable via variator: 6–36 m/min Feed driven by cardan shaft Table with powered rollers Pneumatic pressure units Cgjdpfxerb An Uj Aahop CE certificate Year of manufacture: 2003

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Fully Automatic Finger Jointing Line: Type Doppel-Pack with Automatic Feeding with Multiple Cross-Cut Saw with Stacking Unit Specification: Wood Infeed Length: min. 150 mm max. 1000 mm average 400 mm Wood Cross-Section: min. 20 x 40 mm Cedpjg D Ugksfx Aahsgp max. 80 x 180 mm Wood Outfeed Length: 6030 mm Max. Wood Cross-Section with 10 mm Finger Length: Hardwood 120 cm² Softwood 150 cm² Finger Joint configuration: vertical and horizontal Type of Glue: PVAC white glue, double-sided glue application Electrical Power: Connection Voltage: 400 V Control Voltage: 24 V 50 Hz System completely wired up to the control cabinet. Finger length, possible wood cross-section, and glue type can still be adapted. Performance: 6 milling tables/min Working Height: 960 mm Table Width: 600 mm Glue Application: double-sided application Technical Parameters: Input Material: Input Length of Parts (min. - max.): 150-1000 mm Part Width (min. - max.): 40-155 mm Part Thickness (min. - max.): 20-80 mm Working Height: 960 mm Bundle Width: 600 mm Glue Application: double-sided application

Būklė: naudotas, Gamybos metai: 1994, WEINIG PROFIMAT 23 AUTOMATIC 5-SPINDLE MOULDER – USED Cjdporm Rxwefx Aahsgp Configuration: - 1) Bottom horizontal spindle - 2) Right vertical spindle - 3) Left vertical spindle - 4) Top horizontal spindle - 5) Bottom horizontal spindle Working width: 230 mm Year: 1994 Voltage: 380/50