Holzkraft Hs 10 1350 Eco pirkti naudotą (217)

Sąlyga: naujas, Gamybos metai: 2025, Vertical design for splitting short and meter-length logs Low base plate for easy, ergonomic loading of large trunks Mechanical log-lifting device positions heavy logs in a back-friendly manner Equipped with log retaining bracket Hnsdjhkz Hmopfx Af Ijg Quick, tool-free adjustment of splitting height Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety operation Easy transport with manual drawbar via standard chassis with solid rubber wheels and additional support wheel Impact- and scratch-resistant thanks to high-quality powder coating Space-saving storage due to easy lowering cylinder Dimensions and Weights Length approx. 1440 mm Width/Depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Rated power: 3.5 kW Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Machine Data Maximum splitting force: 14 t Minimum splitting length: 560 mm Maximum splitting length: 1040 mm Minimum log diameter: 100 mm Maximum log diameter: 300 mm Hydraulic System Hydraulic oil tank capacity: 7.5 l Location: Ex stock 54634 Bitburg - Immediately available - Subject to prior sale

Sąlyga: naujas, - new - Description: - Vertical design for splitting short and meter-length logs - Sturdy and robust construction - Impact- and scratch-resistant thanks to high-quality powder coating - Quick, tool-free splitting height adjustment - Low base plate for easy and low-fatigue loading of large logs - Phase inverter on all 400 V models - Convenient transport with hand drawbar thanks to standard running gear with large pneumatic tyres and additional support wheel - Space-saving storage due to easily lowerable cylinder - Powerful industrial hydraulic system - Two-hand safety control - With split wood holder Technical Data: Dimensions and Weights Length approx. 1050 mm Width/Depth approx. 1700 mm Height approx. 2500 mm Weight approx. 282 kg Drive PTO shaft speed 540 rpm Machine Data Max. splitting force: 23.4 t Min. log length: 560 mm Max. log length: 1100 mm Min. log diameter: 80 mm Max. log diameter: 350 mm Hydraulic System Hydraulic oil tank capacity: 24 l Hsdevxr Ryspfx Af Ieng Item no. 5981023

Sąlyga: naujas, - New - Description: - Vertical design for splitting short and meter-length logs - Robust and solid construction - Impact- and scratch-resistant due to high-quality powder coating - Quick, tool-free splitting height adjustment - Low base plate for easy, fatigue-free loading of large logs - Phase inverter on all 400 V models - Convenient transport using the hand drawbar with a standard running gear featuring large pneumatic tyres and an additional support wheel - Space-saving storage thanks to easily lowerable cylinder - Powerful industrial hydraulic system - Two-hand safety operation - With log holder Hnedpfsvwfziox Af Isg Technical specifications: Dimensions and Weights Length approx. 1050 mm Width/Depth approx. 1700 mm Height approx. 2500 mm Weight approx. 373.1 kg Drive PTO speed 540 rpm Power requirement 5.5 kW Electrical Data Connection voltage 400 V Mains frequency 50 Hz Machine Data Max. splitting force 26.1 t Min. splitting length 560 mm Max. splitting length 1100 mm Min. log diameter 80 mm Max. log diameter 400 mm Hydraulic system Hydraulic oil tank capacity 30 l Item no. 5981031

Sąlyga: naudotas, Used machine Year of manufacture: 2022 Equipment and technical data: - Working width: 950 mm - Also suitable for smaller craft businesses for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller, Ø 120 mm, for calibration - Fine adjustment of working height - Clear control panel on the front - Robust monoblock steel machine body with tubular reinforcement, robot-welded, high-mounted working units for maximum rigidity Hnjdpfxsx Hbr Ij Af Ijg - Electrically adjustable table height with digital display - Electronically controlled sanding belt oscillation - Conveyor carpet feed via geared motor with two speeds - Natural rubber feed belt with negative profile - Flexible steel pressure bar in front of the first unit - Rubber pressure rollers before and after each working unit - Pneumatic belt tensioning on each unit with decimal adjustment for grit/thickness - Universally usable for solid wood and veneer thanks to combination unit - Entry-level model for smaller companies - Combination unit for calibration and sanding: - Diagonally grooved steel roller Ø 120 mm with fine height adjustment - Hard sanding shoe with graphite cover - Universal version for calibration and sanding of solid wood, chipboard, and veneer - Sanding shoe on/off from control panel - Roller on/off from control panel - Electronic control "FOX 500 KTR" - Table extension with 2 rollers at infeed and outfeed - Automatic table positioning via push button - Sanding belt length: 1525 mm - Sanding belt width: 970 mm - Max. working width: 950 mm - Feed speed: 4.5/9 m/min - Workpiece height: 4 – 170 mm - Motor: 7.5 kW - Extraction port: 140 mm Dimensions: 1388 x 1545 x 1668 mm Availability: Approx. end of January 2026 Location: North Rhine-Westphalia

Sąlyga: naudotas, Gamybos metai: 2018, Keliamoji galia 350 kg Stalo aukštis min. 757 mm Stalo aukštis maks. 1157 mm Stalo ilgis 3000 mm Stalo plotis 1000 mm Ilgis apie 3010 mm Plotis/gylis apie 1040 mm Aukštis apie 1157 mm Rekomenduojama ištraukimo galia 2200 m³/h Pajungimų skaičius 3 x 220 V Pajungimo angos diametras 140 mm Svoris: 130 kg Hnjdpfoxnlavox Af Ijg Sandėliavimo vieta: Nattheim

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 210PM2219030008, įvesties srovės tipas: trifazis, filtravimo plotas: 22 m², bendras aukštis: 1 800 mm, bendras plotis: 830 mm, bendras ilgis: 1 717 mm, bendras svoris: 290 kg, nominali srautas: 2 262 m³/val, įėjimo įtampa: 400 V, ekstrakcijos antgalio skersmuo: 200 mm, triukšmo lygis: 72 dB, galia: 3 kW (4,08 AG), įėjimo dažnis: 50 Hz, bakelio talpa: 2 165 l, Used unit with minor damage / scratches on the machine housing. Some fine dust is still present inside the machine. Serial number: 210PM2219030008 Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Hnodpfx Asvu Dcyof Isg Maximum performance in this class Very quiet operation All models equipped with collision protection Application range Designed for commercial use For all woodworking machines with a matching extraction port diameter High-quality, well-thought-out construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, allowing flexible use Large service openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag Dust extractor delivered fully assembled for immediate use All models are mobile For model RLA 210: optimal chip distribution in the collection containers due to large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminized polyester fleece for extended service life Filter standard antistatic version, tested and certified to category M-BIA The fan is positioned downstream of the filter Unit of measure: piece Pack unit: 1 Metal impeller Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Prepared for connection to machine recognition for up to 8 machines and slide controls Machine recognition via potential-free contact Pneumatic filter cleaning (compressed air connection via standard plug, operating pressure 4 to 6 bar)

Sąlyga: naudotas, Holzkraft ASA1103 ištraukimo sistema, gera būklė, standartinė komplektacija, 1,5 kW, 50 kg Hnjdpfx Afjx H Ugle Isg Kainos gali keistis, galimi rašybos ar spausdinimo klaidos.

Sąlyga: naujas, Gamybos metai: 2026, Maximum equipment for professionals. Multi-function combination machine with TERSA cutterblock, mitre cutting device, and tilting spindle moulder. Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is maintained even when the scoring saw blade is installed. Scoring unit with a separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from outside. High-precision sliding table made from anodised aluminium, running on hardened and milled steel guide rails. Large outrigger (1200 x 650 mm) with support roller and extendable aluminium telescopic stop, adjustable up to 3300 mm. Saw unit tiltable from 90° to -45°. Tilting spindle moulder from 90° to -45° towards the back into the fence. Four spindle speeds. Spindle moulder with forward and reverse rotation. Quick conversion to thickness planer thanks to parallel opening surfacing tables. Two-speed feed on the thicknessing table. Helical steel infeed roller for consistent timber feed. Three independent industrial motors. With separate saw rip fence and separate jointing fence. With lockable main switch. Equipment details: Format fence Immediate control Hnjdscnxa Sspfx Af Ieg Outrigger Outrigger with angle-adjustable telescopic crosscut stop, with degree scale. Sliding table with ball-contact system Made from anodised aluminium. Guides made of hardened and ground F550S steel, 15% harder than conventional steel. Rails are riveted, not glued. Smooth-running, quiet and reliable. 10-year HOLZKRAFT warranty on wear of the hardened guideways. Cast iron dual trunnion saw unit Height adjustment via dovetail guide. Extremely robust and torsion-resistant for precise cuts. Located close to the saw blade, supported on both sides. Height and tilt adjustment up to 45°. Scoring unit as standard with separate scoring motor 0.55 kW. Dual trunnion spindle moulder unit Large dimensioned, tilting dual trunnion spindle moulder unit made of cast iron. Spindle fence Heavy-duty professional design. The high-quality cast iron spindle fence comes as standard with fine adjustment. 3-position for fast repeat settings. Fine adjustment via rack-and-pinion, numeric display, and aluminium fence faces. Planer units Helical steel infeed rollers for constant and even timber feed. Massive anti-kickback devices prevent workpiece kickback. 4-knife Tersa cutterblock ensures optimal planing finish. Table lips provide quieter operation. Tersa planing cutterblock No more setting and screwing. Cutter change in seconds. Self-locking. Particularly quiet. Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, ensuring maximum stability under all working conditions. A special lifting mechanism maintains the position of the table safely even without locking. Rip fence With fine adjustment and quick clamping. Stable round bar guide made of ground steel. Repositionable aluminium scale. No dimensional gap as guide rods are overlapping. Separate surfacing fence Large professional version (1800 x 150 mm). Tiltable 0–45°. With quick adjustment. Stable round bar guide made of ground steel. Simultaneous opening. Type: No. 5500557

Sąlyga: naudotas, Gamybos metai: 2025, Wood splitter Holzkraft type HSE 5-520 KH for convenient and safe splitting of short wood, suitable for private or semi-professional use. The compact design and easy operation ensure efficient work even in confined spaces. Ideal for firewood preparation. Splitting force: 5 tons Maximum log length: 520 mm Maximum log diameter: 250 mm Drive: Electric 230 V Weight: approx. 50 kg Hjdjwxc Diopfx Af Ieng

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AB00021322, bendras plotis: 1 820 mm, bendras aukštis: 1 960 mm, bendras ilgis: 1 650 mm, darbinis plotis: 1 100 mm, bendras svoris: 1 160 kg, galia: 11 kW (14,96 AG), šlifavimo juostos ilgis: 1 900 mm, ruošinio aukštis (maks.): 170 mm, šlifavimo juostos plotis: 1 115 mm, įėjimo įtampa: 400 V, - The calibration and fine grinding machine LIBRA 35 is an extremely versatile and adaptable machine - Robust, tubular-reinforced monoblock steel frame with high-mounted working units for maximum rigidity - Operator-friendly thanks to a clearly arranged control panel on the front side - Motorized table height adjustment - Digital display for working height - Electronically controlled sanding belt oscillation with reduced compressed air consumption - Automatic star-delta start for main motor - Natural rubber feed belt with negative profile Hnjdpfx Afswwkuyo Ijg - Support table with two rollers at both the infeed and outfeed of the feed belt - Feed belt drive via gear motor with two speeds - Flexible steel pressure bar in front of the first unit - Rubber pressure rollers positioned before and after each working unit - Pneumatic belt tensioning system for each unit, with decimal adjustment for grit size/belt thickness

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Combined woodworking machine, 4-function, HOLZKRAFT CU 410c F 26 N Tersa -- Technical Data -- - Circular Saw - Hnodpfxod Dtc Ts Af Ijg Cutting length: 2,600 mm Max. saw blade diameter: 315 mm Max. cutting height at 90° / 45°: 100 / 79 mm Max. crosscut width left of saw blade: 2,310 mm Cutting width at rip fence: 900 mm Saw blade tilting: 90° - 45° - Planer (Jointer) - Working width: 410 mm Planer table length: 1,660 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs. - Thickness Planer - Table dimensions: 410 x 605 mm Min./max. working height: 3 / 230 mm Max. cutting depth: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning cutter diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 6,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter (saw blade guard): 60 mm - Special offer price - Location: Ex stock 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2026, For sawing, milling, surface and thickness planing, as well as optional slot mortising, in the tightest of spaces - High-precision format sliding table made of anodized aluminum, various lengths available - Large extension table (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional flip stops - Max. saw blade Ø 315 mm, tiltable from 90° to -45° - Wide spindle moulder tilting range from 90° to -45° to the rear - Four spindle speeds up to 10,000 rpm, manually adjustable - With reversible spindle rotation (right/left) - Strongly ribbed, tension-free cast iron surface tables for decades of stability and flatness - 2-stage feed for thickness planing - Three independent industrial motors for continuous operation - With lockable main switch, motor protection switch - Fixed handwheels Dimensions and Weights Net weight: approx. 857 kg Surface Planer Table width: 410 mm Table length: 2000 mm Max. depth of cut: 5 mm Dust Extraction Connection diameters: 3 x 120 mm Saw blade guard extraction: 60 mm Hsdpfx Afoih Dxle Isng Installation Information Required length: 5960 mm Required width/depth: 5140 mm Note: Dimensions include maximum traverse paths or usable lengths. Working Area Length: 1600 mm Width/depth: 1600 mm Note: Please add the working area dimensions to the installation space to obtain the recommended free footprint for the machine. Thickness Planer Table length: 757 mm Table width: 423 mm Min. working height: 3 mm Max. working height: 230 mm Max. depth of cut: 5 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Motor duty type: S6 Motor duty cycle: 40% Motor power: 3 x 5.0 kW Sliding Table and Worktable Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Table length: 1250 mm Table width: 430 mm Table height: 900 mm Spindle Moulder Spindle tilt: 0 – -45° Spindle shaft diameter: 30 mm Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Maximum Cutter Diameters Max. tool diameter, retractable: 210 mm Max. tool diameter, retractable at 45°: 150 mm Max. tenoning cutter diameter: 275 mm Planer Cutterblock Cutterblock type: TERSA Cutterblock diameter: 87 mm Number of knives: 4 pcs Cutterblock speed: 5200 rpm Panel Saw Unit Crosscut length: 2600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3260 mm Saw blade tilt: 90 – 45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection at 90°: 100 mm Max. saw blade projection at 45°: 71 mm (Main) saw blade diameter: 315 mm Please note: With scoring blade (Main) saw blade speed: 4000 rpm Feed Feed speed: 6 – 12 m/min Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft Extraction System RLA 210 For wood dust and chips, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights: Chip collection volume: 2 x 165 l External nominal diameter extraction port (inlet): 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data: Connection voltage: 400 V Mains frequency: 50 Hz Filter: Filter surface area: 22 m² Noise Emission: Maximum sound pressure level: 72 dB(A) Airflow Rate: Nominal airflow rate: 2262 m³/h Hnsdpfx Aohk Dfrsf Isg Dust tested to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models equipped with collision protection Field of Application: Designed for commercial use Suitable for all woodworking machines with an appropriately sized extraction port High-Quality, Well-Designed Construction: Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, enabling flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Delivered fully assembled, ready for immediate use All models mobile On RLA 210 model: Optimal chip distribution in the chip containers due to large filter surface area Filter Description: Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter standard with antistatic version, tested and approved to M-BIA category Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on control box Fan installed downstream of the filter Equipment Details: Fitted with innovative locking mechanism for secure container positioning Location: In stock, 54634 Bitburg - available at short notice -

Sąlyga: naudotas, Gamybos metai: 2018, Nominalus tūrinis srautas: 5089 m³/val. Įsiurbimo antgalis: Ø 300 mm Slėgio sumažėjimas prie antgalio: 2434 Pa Filtrų valymas: suspaustas oras Drožlių surinkimo talpa: 3 x 165 litrų Variklio galia: 7,5 kW | 400 V - 50 Hz / IE3 Garso slėgio lygis: 71 dB(A) Maksimalus suslėgto oro prijungimas: 6,0 bar Saugiklis: 25 A Matmenys (IxPxA): 3050 x 1058 x 2361 mm Svoris (neto): apie 952 kg Sandėlio vieta: Nattheim Hodpfxoxnlaps Af Iong

Sąlyga: geras (naudotas), Gamybos metai: 2004, Pjūklo disko pasvirimas 45° Hnsdpsx Ti Dfjfx Af Isg Vežimo ilgis: 2000 mm Pjovimo plotis: 1270 mm Variklio galia: 4,0 kW Pjovimo aukštis: 100 mm Pjūklo disko skersmuo: 315 mm - Reguliavimas rankiniu ratu - Mašinos svoris: 411 kg

Sąlyga: naudotas, Gamybos metai: 2012, Naudotas ištraukimo įrenginysPagaminimo metai: 2012Nominalus našumas: 2789 m³/hFiltro plotas: 1,8 m²Maks. slėgio sumažinimas: 1668 PaPjuvenų talpa: 160 lVariklis: 1,1 kW, 400 VSiurbimo jungtys: 1 x 120 mm, 1 x 100 mmPrieinamumas: greitaiSandėliavimo vieta: Hochheim Hodpfox Rv Dtsx Af Isng

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, pjovimo plotis (maks.): 1 200 mm, pjovimo aukštis (maks.): 130 mm, pjūklo disko skersmuo: 400 mm, pjovimo plotis ties tiesiniu vedliu: 1 200 mm, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, pagrindinis pjūklo diskas skersmuo: 400 mm, sukimosi greitis (min.): 3 500 aps./min, sukimosi greitis (maks.): 4 500 aps./min, pjovimo ilgis (maks.): 1 250 mm, With pivotable 400 mm saw blade With manual height and angle adjustment 130 mm cutting height Demo machine, year of manufacture 2022 Hedpfx Aowa A E Ajf Ieng

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 100 mm, šlifavimo plotis: 1 100 mm, šlifavimo aukštis: 170 mm, galia: 15 kW (20,39 AG), aukščio reguliavimo tipas: elektrinis, šlifavimo juostos ilgis: 1 900 mm, šlifavimo juostos plotis: 115 mm, CASADEI LIBRA 35/2 RTC 110 Stock Configuration Double-belt version with 1100 mm sanding width for cost-conscious craft businesses The LIBRA 35 calibrating and fine sanding machine is extremely versatile and suitable for various applications. - Robust tube-reinforced monoblock steel frame with high-mounted working units for maximum rigidity - User-friendly thanks to a clear control panel on the front side - Motorized table height adjustment - Digital readout for working height - Electronically controlled sanding belt oscillation with reduced compressed air requirements 1st Unit: Diagonally grooved steel roller, Ø 120 mm, fine adjustment for calibration; pneumatic on/off for the roller 2nd Unit: Combination unit with fine-adjustable working height for calibration and fine sanding: rubber-coated roller Ø 120 mm (45 Sh), hard sanding shoe with graphite coating on replaceable insert, and pneumatic on/off for the roller Segmented sanding shoe: elastic, sector pitch 56 Electronic controller: FOX 500 KTR Workpiece thickness adjustment: electronic Automatic conveyor belt centering: ✔ Automatic star-delta start for main motor Natural rubber feed belt with negative profile Support table with two rollers at infeed and outfeed of conveyor belt Conveyor driven by geared motor with two speeds Flexible steel pressure bar before the first unit Hodpewa Dbxofx Af Ijng Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/belt thickness Dimensions Length approx.: 1650 mm Width/depth approx.: 1820 mm Height approx.: 1960 mm Dust Extraction Connection Number of extraction ports: 2 Extraction port diameter: 140 mm Electrical Data Table height adjustment motor: 0.25 kW Feed motor power: 0.33/0.55 kW Drive motor power: 15 kW Connection voltage: 400 V Mains frequency: 50 Hz Sanding Unit Sanding belt length: 1900 mm Sanding belt width: 1115 mm Max. sanding width: 1100 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. height: 4 mm Max. height: 170 mm #### For many years, we have maintained a cooperative sales approach with specialist dealers, which is why any order is handled via a recommended and mutually agreed trade partner.#####

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, stalo ilgis: 950 mm, stalo plotis: 450 mm, įėjimo įtampa: 400 V, osciliacijos eiga: 15 mm, šlifavimo juostos ilgis: 2 640 mm, šlifavimo juostos plotis: 150 mm, galia: 2,2 kW (2,99 AG), šlifavimo juostos greitis: 14 mm/s, įėjimo dažnis: 50 Hz, Grinding unit pivotable via hand crank The machine stand made of welded steel ensures high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for improved sanding results Oscillation can be switched on as needed Sanding platen with graphite coating for increased belt service life Height-adjustable sanding table to utilize the entire width of the sanding belt Auxiliary table with extraction ports for sanding radii on the rubber-coated deflection roller Sleeve sanding device with attachable worktable Spring-loaded belt tensioning automatically compensates for belt length differences Equipped with adjustable stops, ideal for veneer sanding Dimensions and weights Length (product) approx. 1700 mm Width/Depth (product) approx. 1000 mm Height (product) approx. 1150 mm Weight (net) approx. 300 kg Extraction connection Number of extraction ports: 2 Extraction port diameter: 100 mm Worktable(s) Worktable length: 950 mm Worktable width: 450 mm Worktable height adjustment: 110 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Oscillation motor power: 0.11 kW Grinding unit Sanding belt length: 2640 mm Sanding belt width: 150 mm Belt velocity: 14 m/s Oscillation stroke: 15 mm Sanding surface length: 800 mm Sanding surface width: 150 mm Hjdpfx Aowg Ddasf Ieng Grinding unit swivel: 0 – 45° Do you have any questions? Feel free to contact us! Are you looking for a specialist dealer in your area? We supply machinery dealers throughout Germany as well as in European and non-European countries with metalworking machinery, compressed air technology, woodworking machinery, welding technology as well as cleaning and workshop equipment. Contact us and we will provide you with the nearest dealer.

Sąlyga: naujas, Stürmer Maschinen GmbH introduces a new generation of Holzkraft format band saws to the market. With innovative technology and well-thought-out design, the new FBS models set new standards for precision and versatility. Thanks to the sliding carriage and extension arm, these format band saws are ideal for cutting beams, blocks, and insulation materials. Whether in prefabricated house construction, the packaging industry, or paper processing, these machines offer a reliable solution for a wide range of applications. Each model is available in various configurations and can be individually tailored to specific requirements. Together with you, we develop the optimal solution for your production processes. Interested? Get expert advice from our specialists! Technical specifications: - Exceptionally smooth and precise operation thanks to a torsion-resistant machine frame - Heavy-duty cast iron flywheels and chip scrapers - Grey cast iron saw table with ground and polished surface - Smooth-running aluminum format sliding carriage with telescopic crosscut fence and folding stops Hnedpewa Srfefx Af Iog - Aluminum parallel fence with round bar guide, easy to adjust - High operating comfort with a mobile control panel that moves within the working radius - Special blade guides above and below - Saw blade tension indicator - Integrated lubrication system with felt pads - Precise cutting height adjustment via rack and pinion with millimeter scale - Self-braking motor - Automatic star-delta starter The photos show examples of different versions. Please send us your specific inquiry. Sales are handled via authorized dealers.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, veikimo valandos: 5 h, Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 3 200 mm, pjovimo plotis (maks.): 1 270 mm, pjovimo plotis ties tiesiniu vedliu: 1 270 mm, pjovimo aukštis (maks.): 200 mm, pjūklo disko skersmuo: 550 mm, aukščio reguliavimo tipas: elektrinis, bendras svoris: 1 000 kg, sukimosi greitis (min.): 2 500 aps./min, sukimosi greitis (maks.): 5 000 aps./min, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, galia: 9 kW (12,24 AG), Įranga: dozatorius, Robust steel and cast iron construction Hsdpfswz Nzyjx Af Ijng Equipped as standard with three spindle speeds Standard NC control with 7-inch LCD display for setting all machine axes Saw unit with permanently precise dual swing segment guide, 6-year Holzkraft warranty on wear of swing segments Electrically adjustable cutting height and saw blade tilt Scoring unit with separate scoring motor High-performance industrial motors Smooth-running and precise sliding table made of anodized aluminum with proven and permanently smooth ball contact system on hardened rails, 10-year warranty on wear of guide rails Large support surfaces thanks to standard table extension and widening Cast iron saw table Folding parallel fence with fine adjustment and round bar guide Crosscut fence, extendable up to 3200 mm, with two flip stops and eccentric clamp Extra-large outrigger with material roller, extendable up to 2400 mm Side-swiveling saw blade guard with integrated extraction port Optional: extendable mitre fence up to 1500 mm for direct mounting on the sliding table Numerous equipment options for individual customization

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 3 200 mm, pjovimo plotis (maks.): 1 300 mm, pjovimo plotis ties tiesiniu vedliu: 1 300 mm, pjovimo aukštis (maks.): 140 mm, pjūklo disko skersmuo: 400 mm, sukimosi greitis (min.): 3 500 aps./min, sukimosi greitis (maks.): 4 500 aps./min, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, pasukimo diapazonas: 45 °, Įranga: dozatorius, variklio stabdis, Heavy-duty panel saw with scorer unit and motorized saw blade adjustment Technical Description - Motorized saw blade tilt and height adjustment with digital display - Main saw blade with belt drive, speeds: 3500/4500 rpm - High own weight ensures vibration-free operation - Large outrigger table with material roller - Parallel fence with round bar guide and digital position display - Extendable aluminum rip fence with two flip stops - Powerful 7.5 kW main motor mounted on a robust cast iron frame - Four-way ball-bearing sliding table made of anodized aluminum with high torsional stiffness - Standard with table extension and width extension made from heavy-duty sheet metal - Large swing-away blade guard, easily raised via gas pressure spring - Rapid blade change system for quick and convenient saw blade replacement - Multiple locking positions on sliding table Dimensions and Weight Length approx.: 3386 mm Width/Depth approx.: 3600 mm Height approx.: 1310 mm Weight approx.: 850 kg Extraction Connection Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Power input: 7.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Noise Emission Sound pressure level: 96.5 dB(A) Saw Unit Cutting width with parallel fence: 1300 mm Max. cross-cutting width left of blade: 3200 mm Saw blade tilt: 90–45° Max. cutting height 90°: 140 mm Max. cutting height 45°: 100 mm Saw blade diameter: 400 mm Saw blade speed: 3500/4500 rpm Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 416 mm Sliding table height: 890 mm Table length: 1008 mm Table width: 554 mm Table height: 885 mm Hodpfx Ajwa I Upof Ieng Scoring Unit Scorer blade diameter min.: 120 mm Scorer blade diameter max.: 125 mm Scorer blade speed: 8000 rpm #### For many years, we have maintained a partnership-based sales concept with specialist dealers. Therefore, in the event of an order, processing is carried out via a recommended partner, coordinated with you.####

Sąlyga: naujas, bendras ilgis: 1 700 mm, bendras plotis: 1 000 mm, bendras aukštis: 1 500 mm, stalo ilgis: 900 mm, stalo plotis: 360 mm, įėjimo įtampa: 400 V, šlifavimo juostos ilgis: 2 580 mm, šlifavimo juostos plotis: 150 mm, galia: 2,2 kW (2,99 AG), šlifavimo juostos greitis: 14 mm/s, įėjimo dažnis: 50 Hz, • Grinding unit swivels manually via handwheel • The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation • Oscillating sanding belt with a separate geared motor for improved sanding results • Oscillation can be switched on or off as required • Graphite-coated sanding shoe for increased belt service life • Height-adjustable sanding table for full utilization of sanding belt width • Additional table with extraction openings for sanding radii on the rubber-coated deflection roller • Sleeve sanding unit with attachable work table • Spring-loaded belt tension automatically compensates for belt length differences Technical Data: Dimensions and Weights - Length (product) approx. 1700mm - Width/Depth (product) approx. 1000mm - Height (product) approx. 1150mm - Weight (net) approx. 250kg Extraction Connection: - Number of extraction nozzles: 2 - Extraction nozzle diameter: 100mm Work Table: - Table length: 900mm - Table width: 360mm - Table height adjustment: 110mm Electrical Data: - Rated voltage: 400V - Mains frequency: 50Hz Hsdpowg Dy Iofx Af Ijng - Oscillation motor power: 0.11kW Sanding Unit: - Sanding belt length: 2580mm - Sanding belt width: 150mm - Belt speed: 14m/s - Oscillation stroke: 15mm - Sanding area length: 800mm - Sanding area width: 150mm - Maximum sanding height: 150mm - Swivel range of grinding unit: 0 – 90° Scope of Delivery • 1x K100 sanding belt • 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x K80 sanding sleeves – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Service toolbox • Mitre gauge Do you have any questions? Feel free to contact us! Looking for a specialist dealer in your area? We supply machinery dealers throughout Germany, as well as in European and non-European countries, with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop equipment. Contact us and we will put you in touch with your nearest dealer.

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, CNC drilling machine for precise single-part and series production A drilling head with seven vertical, four horizontal spindles, and a grooving saw unit Equipment: - Roller conveyor for workpiece infeed and outfeed - Edge sensor Hnedpowz Nuyofx Af Isg - Pressure-reinforced Y-axis for machining hard materials - Automatic lubrication - Operator interface software Maestro CNC - QWERTY keyboard for convenient data entry

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 3 200 mm, pjovimo plotis (maks.): 1 300 mm, pjovimo plotis ties tiesiniu vedliu: 1 300 mm, pjovimo aukštis (maks.): 115 mm, pjūklo disko skersmuo: 350 mm, aukščio reguliavimo tipas: mechaninis, sukimosi greitis (min.): 3 500 aps./min, sukimosi greitis (maks.): 4 500 aps./min, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, pasukimo diapazonas: 45 °, galia: 4,7 kW (6,39 AG), Įranga: dozatorius, With swiveling 350 mm saw blade and scoring unit With manual height and angle adjustment, and digital display on the parallel fence 115 mm cutting height Demo machine, year of manufacture 2022 Hnsdjwa Andjpfx Af Isg