Furnitūros centras pirkti naudotą (3)

Sąlyga: naujas, Assembly line consisting of: Pos. 1.0 / RU-CBM 4000 Work Table with a 500 mm extended guide rail for the additional installation of an aluminum holder screwdriving machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, work platform tilt manually adjustable. Mounting for hardware shear or hardware punch. 16 swiveling counter supports for hooking in sashes, completely pneumatically foldable for unobstructed movement of the sashes on the table surface. Device for scanning the sash fitting length for constant and variable/central gear position on pre-drilled sashes, color-based measurement detection of the fittings. RU-SH special screwdriver mounted on a carriage with pneumatic depth stop, safety control, pneumatic height adjustment, screw feed device with automatic shut-off of the refill container (manual loading for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screwing levels mounted on the carriage. Redjd Ih Huepfx Agiop RA-4, turret stop for 4 different sash widths mounted on the swiveling table. Sash dimension scanning pneumatically actuated, scanning range up to 2500 mm with simultaneous clamping of the scanner. PSF - Pneumatic clamping device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Guide rail extended to the left by 800 mm. Pos. 1.1 / 5035-1 Pneumatic tilting device for the working surface with foot valve Pos. 1.2 / 0500000 Bracket adapted to customer’s punch/shear. For mounting a customer-supplied hardware punch or hardware shear (third-party make) on the sash assembly table. Please specify manufacturer with order!!! Pos. 1.3 / 5597-7 Travel assembly for RU-CBM on semi-circular running rails. The running rollers are mounted left and right on the base frame of the table. Pos. 1.4 / 6354-6 3 double-meter semi-circular running rails 30 x 10 mm. Pos. 1.5 / 0730000 RU-SBL3000/40 hardware storage free-standing, length 3100 mm, depth 1250 mm, height 2200 mm, frame on the front side without supports, 40 compartments, in a single row, each 10 separated by partitions and a continuous shelf at the top, compartment size: width 280 mm, height 150 mm. Pos. 2 RU-CSA-SMB aluminum holder screwdriving machine with automatic screw feeding and manual feeding of the aluminum holders from a mobile box with pneumatic positioning device, screwdriver with depth stop and 4-position turret stop. Pneumatic y-axis positioning device against two 6-position turret stops. Feed container for manual feeding of turning holders or clip holders in square format 18.5 x 18.5 mm. The holder is manually pushed into a channel in the box and pneumatically positioned in front of the screwdriver mouthpiece. Profile depth max. 150 mm, screw spacing in y-direction max. 120 mm. Pos. 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum jib version with base column, easy-running jib, and push trolley. Slewing and trolley travel manual by pulling and pushing on the load. Outreach 6 m Construction height 4.461 m Jib lower edge 3.722 m (upper edge 3.9 m) Slewing range max. 270° Steel structure painted in RAL 7035 The base plate is to be anchored to the customer’s hall floor with...

Sąlyga: naujas, Fitting Storage Yes Working Width 3000 (3500) mm Tiltable Yes Ruchser RU-BM-3000 (Option: 3500) Sash Assembly Table ----- Manufacturer’s Description: Pos. 1.0 Item 0610000 RU-BM-3000 Sash Assembly Table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver, length 3000 mm, width 1400 mm, working platform tilt adjustable manually. Usable width 2500 mm. Provision for fitting shear or fitting press. 10 swiveling supports for hanging sashes, completely pneumatically foldable to allow unobstructed movement of the sash on the table surface. Device for gauging sash hardware length for fixed and variable/central handle positions and any desired handle height for pre-drilled sashes, color-coded dimension identification for hardware positions. Support height can be set to 50 or 60 mm at a stop. RU-SH, special screwdriver with pneumatic depth stop mounted on sliding carriage, safety control, pneumatic height adjustment, screw feeding device with automatic filling container shutoff, manual entry for a second screw length on the special screwdriver. Accessories included. RA-8, turret stop for 8 screw levels, mounted on the carriage. RA-4 swinging rail depth manually adjustable left/right each with a 4-position turret stop. PSF - Pneumatic clamping device for sashes against side stops. Working height adjustable from 900 - 1000 mm. Please specify whether you require felt, sliding, or brush strips as support surface. Pos. 1.1 Item 6315 RU-BM-... hardware preset per customer specification Pos. 1.2 Item 0500000 Bracket matched to customer punch/shear. For mounting a customer-supplied hardware punch or shear (third-party make) on the sash assembly table. Please specify the make when ordering!!! ----- Price RU-BM-3000 in the above configuration, ex works: on request! ----- Optional Fitting Storage for RU-BM-3000: ----- Variant Fitting Storage, Fixed-Mounted: Price 4,409.00 EUR Item 0630000 RU-BL-30/30 fitting storage, fixed-mounted, Rodet Tq Aaepfx Agisp mounted above the sash assembly table length 3100 mm, depth 1250 mm, with 3 shelves, each with 10 compartments separated by dividers. Variant Fitting Storage, Free-Standing: Price 5,291.00 EUR Item 0710000 RU-SBL3000/30 fitting storage, free-standing, length 3100 mm, depth 1250 mm, height 2050 mm, frame structure front without supports, 30 compartments, arranged in one row, 10 each separated by dividers, and one continuous top shelf, compartment size: width 280 mm, height 150 mm. 4 pcs corner brackets for corner gearboxes: Price 614.00 EUR Arm length 120 x 120 mm; angle approx. 3° The front edge of the bracket is bent up 5 mm to prevent accidental unloading. 2 pcs left and 2 pcs right under the first shelf of the fitting storage. ----- Surcharge for RU-BM-3500 ----- Item 0610300 RU-BM-3500 Sash Assembly Table for sashes up to max. 3000 mm height with RU-SH, special screwdriver, length 3500 mm, width 1400 mm, working platform tilt manually adjustable, usable width approx. 3000 mm Surcharge RU-BM 3500 to RU-BM 3000: 2,831.00 EUR Fitting Storage for RU-BM-3500 (only free-standing possible): Price EUR ...

Sąlyga: naudotas, Gamybos metai: 2018, Fitting Support Yes Rjdjxmamuepfx Agiep Working Width 3,000 mm Swivelling No Eder + Mueller Sash Assembly Table ----- Sale on behalf of customer, ex-location. Machine was in use until recently, now available at the customer’s warehouse. Previous fittings: Maco Multi Matic (but other fittings also possible) Technical manufacturer’s description: ----- Table height and working angle mechanically adjustable with fixed-mounted fitting support Sash assembly table length 3,000 mm with fixed fitting support Support surface covered with felt 12 swivelling counterholders for hanging in sashes Fitting detection for central and constant gear placement 1 storage tray; 4-fold air connection with automatic special screwdriver with pneumatic depth stop 6-position turret stop for different screw depths pneumatic height adjustment for 6 screwing levels automatic screw feed manual insertion for second screw length Dimensions: Length approx. 3,500 mm, Depth approx. 2,200 mm, Height approx. 2,100 mm ----- Price for the above machine on request! ----- (Technical data provided by manufacturer – subject to change and without guarantee!) All prices quoted are net, plus statutory VAT.