Krūminės apdirbimo staklės pirkti naudotą (335)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
mažas skelbimas

848 km
Krumpliaračių šlifavimo staklės
HÖFLERH1603
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus,
mažas skelbimas

1 212 km
Kūginių krumpliaračių bandymo mašina
KLINGELNBERG-OERLIKONT60 A
Skambinti
Sąlyga: naudotas, Gamybos metai: 2007, Wheel Diameter – max. 500 mm
Hypoid Adjustment ±70 mm
Axis Cross Angle 90°
Y-Axis Distance 150 – 350 mm
Z-Axis Distance 120 – 340 mm
Speed Range – stepless 0 – 5,000 rpm
Torque at Spindle 57 Nm
Taper 99.2 mm
Pulling Force – Tool Clamping 23,000 N
Maximum Braking Torque 93 Nm
Total Connected Load 20 kVA
Total Power Requirement 15 kW
Machine Weight approx. 6 t
Space Requirement approx. 2.35 x 2.24 x 2.5 m
Working Area:
Max. Ring Gear Diameter – 500 mm
Hypoid Adjustment X (v) – ±70 mm
Axis Angle – 90°
Distance Y-(H) Axis Ring Gear/Pinion Spindle Flange – 150 ... 350 mm
Distance Z-(J) Axis Pinion/Ring Gear Spindle Flange – 120 ... 340 mm
Pinion Spindle Head:
Speed Range, stepless – 0 ... 5,000 rpm
Torque – 57 Nm at n= 0 ... 1,240 rpm
Torque – 54 Nm at n= 1,240 ... 5,000 rpm
Internal Taper (with adapter) – Ø99.2 mm (#39)
Pulling Force for Tool Clamping max. – 23,000 N
Ring Gear Spindle Head:
Speed Range, stepless – 0 ... 3,000 rpm
Torque – 95 Nm at n= 0 ... 750 rpm
Torque – 93 ... 24 Nm at n= 750 ... 3,000 rpm
Internal Taper (with adapter) – Ø99.2 mm (#39) / (Ø35.6 mm (#14))
Pulling Force – Max. 23,000 N
Maximum Ring Gear Braking Torque – 93 Nm up to 3,000 rpm pinion speed at i = 1:4
Maximum Ring Gear Braking Torque – 93 Nm up to 1,200 rpm pinion speed at i = 1:1.6
Maximum Ring Gear Braking Torque – 59 Nm up to 1,200 rpm pinion speed at i = 1:1
Electrical Specifications:
Total Connected Load – 20 kVA (effective machine capacity)
Voltage – 3 x 400V (other voltages on request)
Voltage Tolerance – ±10%
Ibsdpfx Acoukitxoujc
Frequency 50 Hz (other frequencies on request)
mažas skelbimas

1 356 km
Pavarų šlifavimo staklės
HOFLERMEGA 1500
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Gear grinding machine
CNC control: SIEMENS 840C
Isdpfxeu Aqi Hs Acujbc
Max. external diameter: 1,500 mm
Grinding length / Max. gear width (spur gears): 980 mm
Module: 1.5 – 25
Base circle diameter: min. 80 mm
Helix angle: 35°
Table diameter: 1,000 mm
Max. workpiece weight: 6,000 kg
Grinding spindle power: 20 kW
Profile corrections: max. 0.5 mm
Lead corrections: max. 1 mm
Tailstock height: 1,250 mm
Axial slide travel (Z-axis): 1,000 mm
Dimensions: 7,760 x 8,360 x 4,500 mm
Weight: 42,000 kg

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
mažas skelbimas

1 242 km
Dantytų briaunų frezavimo staklės
PRÄWEMAW 2 - 1 SYNCHROFORM
Skambinti
Gamybos metai: 1991, Sąlyga: naudotas, Wheel diameter - max. 400 mm
Number of teeth - max. 150
Module - max. 5
Total power requirement: 16 kW
Machine weight approx. 10 t
P R Ä W E M A
CNC Gear Edge Milling Machine in continuous hobbing process
for chamfering external and internal gears on sliding sleeves,
synchronizer rings, clutch bodies, starter pinions, spur gears, etc.
Type SynchroForm W 2 - 1 Year of manufacture: 1991 Machine No. 05610
Workpiece diameter min./max.: 30 - 400 mm
Number of teeth: 6 - 150
Module max.: 5
Tool holder/shank-Ø: SK 30 / 20 mm
Tool speed/spindle performance max. continuous: 4,000 rpm or 1.8 kW
Transverse and longitudinal feed rates: 0.001-12 m/min
Workpiece speed max. (1.5 kW) - C axis: 2,000 rpm
Total drive approx.: 16 kW - 380 V - 50 Hz
Weight approx.: 10,000 kg
Equipment / Special features
- BWO (HECKLER & KOCH) CNC control type 785 H for a total of 7 axes with
screen input and all necessary monitoring and fault diagnosis systems
for fully automatic operation.
- 2 milling spindle units, left and right, adjustable to all required
angular positions, CNC-controlled:
Z and W axes = tool cross slide / X and U axes = tool longitudinal slide,
Iodpfxst Hwylo Acusbc
L and O axes = milling spindle, C axis = workpiece spindle rotation.
Manually controlled: tool slide rotary table (B and E axis),
tool slide vertical adjustment (V and Y axis), tool head tilt (A and D axis),
each with ROD for digital display in the control.
- Hydraulic workpiece clamping device in combination with an
automatic loading system via workpiece feed/conveyor belt and swing loader,
as well as air system monitoring for the workpiece.
- Coolant system with chip conveyor, soundproof enclosure,
central lubrication, integrated hydraulic unit, pneumatically actuated
safety doors, deburring equipment, etc.
The machine operates on the hobbing principle with electronically synchronized
tool and workpiece axes for machining straight roof profiles, both
symmetrical and asymmetrical. Characterized by high productivity and precision.
Condition: good to very good – shortly ready for demonstration under power
Delivery: ex stock – as inspected
Payment: strictly net – upon receipt of invoice
Further machines for the processing of transmission components are always available
from stock. Please enquire about your requirements.
mažas skelbimas

1 242 km
Stovo frezavimo staklės
DONAU-KNAPPUZFM-V 300 H-CNC
Skambinti
Sąlyga: naudotas, Gamybos metai: 1990, Fräslänge 2100 mm
Fräsbreite 300 mm
Modul - max. 16/18
Modul - min.
Gesamtleistungsbedarf 10 kW
Maschinengewicht ca. 5 t
Raumbedarf ca. m
D O N A U - K N A P P
Universal - CNC gesteuerte Zahnstangenfräsmaschine
Type UZFM - V 300 H - CNC
Baujahr 1990 # 90-244x
_____
max. Verzahnungslänge 2.100 mm
Fräsweg/Fräsbreite quer max. 300 mm
Modulbereich St/GG max. 16/18
Tisch-Aufspannfläche 510 x 2.400 bzw. 275 x 2.120 mm
Einbauhöhe unter Fräs-Spindel-Achse min./max. 150 / 430 mm
Fräser-Ø min. / max. Ø 125 + 2 x Schnitttiefe / 280 mm
Fräserbreite max. fliegend / mit Gegenlager 50 / 140 mm
Fräserdorn-Ø max. 22 - 50 mm
Frässpindelkopf schwenkbar rechts / links (Hinterfräsungen) 30 / 45 °
Frässchlitten schwenkbar rechts / links (Schrägverzahnung) 30 °
9 Spindeldrehzahlen 40 - 120 U/min.
Vorschübe stufenlos (Frässchlitten) / Eilgang 0 - 1.300 / 2.000 mm/Min.
Tisch-Eilgang 10.000 mm/Min.
Frässpindelantrieb 5,5 kW
Gesamtantrieb 10 kW - 400 V - 50 Hz
Gewicht 5.000 kg
Zubehör / Sonderausstattung:
o SIEMENS - CNC - Steuerung Model M 810 für die Teilachse ( X ), sodaß eine
schnelle Umstellung der Maschine möglich ist ohne Wechselräder. Teilschritte
0,001 - 2100 mm, auch unterschiedliche Teilungsdistanzen programmierbar,
" Einstellung aller Vorschub- und Eilgangwege über die Hydraulik, Vorschub
einstellbar für 2 Schnitte, Wegbegrenzung der Achsen über voreinstellbare
Endschalter
o Aufgebaute hydraulische Werkstückspanneinrichtung ca. 2.000 x 160 mm
lang
o verstärkter Fräskopf mit stufenlos regelbare Fräserdrehzahl
o separat stehender Schaltschrank und Hydraulikanlage , im Tisch
eingebauter Späneföderer und separat stehender Späneförderer mit
Kühlmitteleinrichtung, Zentralschmierung, etc.
Die Maschine könnte auch mit einer aktuellen SIEMENS-Steuerung nachgerüstet
werden!
Q U O T A T I O N
We are pleased to offer you ex our stock, subject to prior sale and error in
technical data:
D O N A U - K N A P P (Germany)
Universal - CNC-Controlled Rack Milling Machine
Model UZFM - V 300 H - CNC
Year 1990 Serial No. 90-244x
_____
Max. Cutting length 2.100 mm
Milling travel / milling width cross max. 300 mm
Isdpfx Aot Hwwqocujbc
Module in steel / cast iron, max. 16 / 18
Table clamping size 510 x 2.400 resp. 275 x 2.120 mm
Mounting height under cutter, depending on cutter Ø 150 - 430 mm
Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 280 mm
Cutter width max. without/with counter bearing support 50 / 140 mm
Cutter mandrel Ø max. 50 mm
Milling spindle head, swivelling ( for relief cuts ) right / left 30 / 45
°
Milling spindle speeds steplessly adjustable 40 - 120 rpm
Milling slide swivelling right / left for Helix Cuts 30 °
Feeds, infinitely variable (milling slide) 0 - 1.300 / 2.000 mm/min
Quick return of WP-table 10.000 mm/min
Milling spindle drive 5,5 kW
Total electrical load 10 kW - 400 V - 50 Hz
Weight 5.000 kg
Accessories / Special Features:
* SIEMENS-CNC-Control for the Indexing axis ( X ) so th...
Atraskite daugiau naudotų mašinų
mažas skelbimas

1 242 km
Pavarų formavimo staklės
LORENZLS 400
Skambinti
Sąlyga: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm
Wheel width 75 mm
Total power requirement 25 kW
Machine weight approx. 7 t
LORENZ
High-Performance Gear Shaping Machine
Model LS 400
Year of manufacture 1975 S/N 12592
_____
Max. external gear diameter 400 mm * (possibly larger)
Max. internal gear diameter approx. 350 mm
Max. gear width 75 mm
Module range 0.5 - 6
Stroke length 82 mm
Stroke position adjustment 0 - 100 mm
Distance from shaping spindle to machine body 205 mm
Isdpet Hww Dofx Acujbc
Spindle taper approx. MK 5
Strokes per minute roughing/finishing 118 - 1,000 /min.
Table size 400 mm
Table bore 125 mm
Installation height between table and
shaping head min./max. 190/290 mm
Fixed distance shaping spindle 250 mm
Table axial travel approx. 295 mm
Number of teeth approx. 12 - 150
Feed range Tooth depth 0.01 - 0.063 mm /stroke
-"- Radial feed at
tool-Ø 125 0.125 - 3.150 mm /stroke
Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz
Weight 7,000 kg
Accessories / Special equipment:
• Hydrostatically guided slideway with separate hydraulic unit
• Built-in intermediate plate 100 mm to increase shaping head height
• Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters
• Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master)
• Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts
• Automatic and motor-driven stroke position locking at top dead center after finishing
• Separate control cabinet
• Integrated coolant system with chip conveyor and magnetic separator
• Approx. 20 change gears
Condition: Satisfactory to good, shortly demonstration-ready
Delivery: Ex stock – as inspected
Payment: Net – upon receipt of invoice
mažas skelbimas

1 242 km
Pavaros bandymo mašina
KLINGELNBERGPFSU 2500
Skambinti
Sąlyga: naudotas, Gamybos metai: 1980, Raddurchmesser - max. 2500 mm
Radbreite 0 mm
Ibsdot Hw Aaopfx Acusc
Modul - max. 34
Modul - min. 1
Gesamtleistungsbedarf ca. 15 kW
Maschinengewicht ca. 15 t
Raumbedarf ca. 4,20 x 2,00 x 2,90 m
K L I N G E L N B E R G (Deutschland)
Universale Verzahnungs- und Schraubungsmessmaschine
Modell PFSU 2500 Baujahr ca. 1980 Serien-Nr. B 2918 _____
min/max Zahnrad-Ø 250 – 2.500 mm
Modulbereich 1 – 34
Größter Grundkreis-Ø 2.400 mm
Messbare Zahnflankenlänge 500 mm
Hub des Messschlittens, ca. 600 mm
Schrägungswinkel 0 – 45 °
Werkstücklänge zwischen Spitzen min./max. 430 – 2.500 mm
Werkstück-Ø in Gegenauflage 1.340 mm
Werkstücktisch-Ø 690 mm
Diagrammvergrößerung 50/100/200/500/1000/2000 : 1
Max. zulässiges Prüfgewicht Zahnrad, ca. 10.000 kg
Gesamtelektrische Anschlussleistung, ca. 15 kW – 380 V – 50 Hz
Maschinengewicht, ca. 15.000 kg
Die Maschine ist geeignet zur Vermessung des Zahnprofils und der Zahnflankenspuren an schweren gerade- und schrägverzahnten Stirnrädern.
Zubehör / Sondermerkmale:
* Digitale Einstellung des Grundkreises und digitaler Winkel ohne Grundkreisscheiben.
* Längenverstellbare Halterung für Teilungsprüfer, jedoch keine Prüfeinheit vorhanden.
* Schwere Werkstücke können gemessen werden. Motorischer Einricht-, Ausricht- und Prüfprozess per Knopfdruck.
* Gegenlager kann zum Beladen schwerer Zahnräder und Kettenräder nach hinten geschwenkt werden, weiteres Zubehör vorhanden.
Zustand: Diese Messmaschine muss überholt und mit einer neuen CNC-Steuerung nachgerüstet werden. Die Grundmaschine ist jedoch in einem ordentlichen Zustand und daher lohnt sich die Überholung sicherlich.
Maschine kann nicht unter Strom besichtigt werden. Teile des Bedienpanels sind nicht vorhanden.
mažas skelbimas

1 242 km
Dantų šonų šlifavimo staklės
HÖFLERH 2500 / 1200
Skambinti
Sąlyga: naudotas, Gamybos metai: 1980, Wheel diameter – max. 2,500 mm
Wheel width 1,200 mm
Ibodst Hwqqjpfx Acuec
Module – max. 32
Module – min. 3
Total power requirement 25 kW
Machine weight approx. 60 t
Space requirement approx. __ m
Year of manufacture: 1980
Overhauled: 1990
Wheel Ø min./max. 180 – 2,500 mm
Module 3 – 32
Maximum helix angle 10 – 35°
Wheel width for spur gearing 1,200 mm
Stroke length approx. 100 – 1,200 mm
Number of strokes 80 – 350 strokes/min
Adjustable stroke position 300 mm
Stroke speed 4–40 m/min
Max. workpiece weight approx. 18,000 kg
Max. number of teeth 16–576
Table size Ø x bore 1,400 x 500 mm
Grinding wheel Ø approx. 500 mm
Grinding wheel peripheral speed 34 m/s
Total drive approx. 25 kW – 380 V – 50 Hz
Weight approx. 15 t
Accessories / Special features:
• Hydrostatic guides on the grinding slide, table, and all other guideways
• Complete grinding enclosure with sliding doors
• Automatic grinding cycle in multiple passes as well as settings for roughing, finishing, fine finishing, and automatic dressing cycle after preset number of teeth
• Profile correction possible by corresponding dressing and additional movement of the grinding slide (crown and flank correction in height and side)
• Approx. 50 change gears, angle measuring device
• Large coolant system with band filter and oil mist extraction
• Separate control cabinet, separate hydraulic unit, separate oil cooling system
mažas skelbimas

1 242 km
Pavarų formavimo staklės
LIEBHERRWS 1
Skambinti
Sąlyga: naudotas, Gamybos metai: 1969, Wheel diameter - max. 265 mm
Wheel width 45 mm
Module - max. 4
Module - min. 0.3
Workpiece diameter - max. 300 mm
Stroke length max. 0-50 mm
Ibsdpfx Aot Hwruecuoc
Stroke position adjustment 25 mm
Distance between work spindle and clamping surface max. 170/245 mm
Internal spindle taper MK 4
Table size 180 mm
Table bore 95/75 mm
Number of strokes per minute 450 - 840
Total power requirement 10 kW
Machine weight approx. 5200 kg
Space requirement approx. m
max. gear wheel Ø (external) approx. 265 mm *
max. workpiece Ø for internal gearing 300 mm
max. gear width 45 mm
Module range 0.3 - 4
Stroke length 0 - 50 mm
Stroke position adjustment 25 mm
Distance table to spindle min./max. 170/245 mm
Spindle internal taper (external 90/50 internal) MK 4
Table size 180 mm
Table bore 95 / 75 mm
Table travel, transverse approx. 175 mm
Steplessly adjustable strokes per minute 450 - 840 strokes/min
Feed range 0.09 - 0.6 mm/stroke
Circular feed 2722 - 681 strokes/cutting wheel revolution
Total drive 10 kW - 380 V -50 Hz
Weight 5,200 kg
Accessories / Special Equipment
* Rotary switch for various operating programs and manual control
* Multiple-cutting device for roughing/finishing/burning out
* Hydraulic external workpiece clamping device mounted on the table (internal toothing performed; type of collet)
* Separate control cabinet and separate hydraulics
* Hydrostatic linear guiding with separate oil cooler
* Lateral table offset for optimal ram lift-off
* Stepless stroke rate adjustment via GS motor
* Built-in coolant system
* Pre-settable impulse counter for precise table shut-off after each cut, with digital display
* Various change gears
mažas skelbimas

1 242 km
Pavarų honavimo staklės
REISHAUERRZR
Skambinti
Sąlyga: naudotas, Gamybos metai: 1996, Workpiece diameter: 240 mm
Centre distance: 0 mm
Maximum honing length: 500 mm
Maximum module: 5
Total power requirement: 12 kW
Machine weight approx.: 5,000 kg
Required floor space approx.: [missing]
R E I S H A U E R (Switzerland)
CNC-Controlled Gear Honing Machine
Model: RZR, Year: 1996 # 74 105
_____
Wheel diameter min./max.: 10 - 240 mm
Module: 0.5 - 5
Helix angle: +/- 30°
Workpiece slide stroke (Z-axis): 275 mm
Honing tool traverse stroke (X-axis): 128 mm
X-axis infeed: 0.001 mm/stroke
Crowning approx.: 0.5°
Workpiece clamping length approx.: 500 mm
Max. workpiece oscillation approx.: 3,000 mm
Honing tool external/internal diameter x width: 325/308 x 45 mm
Honing tool rotational speed: 100 - 1,200 rpm
Honing tool dressing speed: 30 - 1,000 rpm
Spindle drive: 4 kW
Total drive approx.: 12 kW - 400 V - 50 Hz
Total weight approx.: 5,000 kg
Accessories / Special equipment:
Iodpfst Hwvmox Acuobc
- SIEMENS CNC path control type 810 G allows input of all relevant gear data and dialog-based workpiece setup with the controller. With DNC interface RS 232 for data input and output.
- A-axis = swiveling/helix adjustment, Z-axis = table movement, X-axis = honing tool infeed, S-axis = honing wheel speed, U-axis = crowning adjustment.
- Equipped with attached automatic device for threading the honing wheel into the tooth gap.
- The tool swivel angle (A-axis) is also electrically positioned, fast and precise, and hydraulically clamped, resulting in reduced set-up times.
- Hydraulic workpiece clamping via footswitch between the workpiece spindle headstock and tailstock, both units movable on the workpiece table depending on the workpiece.
- Complete working area enclosure with sliding doors and safety interlock.
- Extensive original REISHAUER honing oil processing system type RTO 40.10, with centrifuge and cooling unit for constant honing oil temperature, oil mist filter, etc.
- Various diamond dressing tools mounted on arbors.
- Separate ventilated and cooled electrical/control cabinet, separate hydraulic unit.
mažas skelbimas

1 242 km
Šaltojo valcavimo mašina
EX-CELL-OXK 225
Skambinti
Sąlyga: naudotas, Gamybos metai: 1987, Maximum rolling pressure: NA t
Workpiece diameter: 38 mm
Workpiece length: 500 mm
Total power requirement: 24 kW
Machine weight approx.: 10 t
Space requirement approx.: m
Max. stroke of tool slide, upper/lower: 760 mm
Max. rack length approx.: 610 mm
Workpiece length between centers approx.: 500 mm
Max. gear width/profile width: 92 mm
Max. workpiece Ø: 38 mm
Tailstock stroke on the boom, hydraulic approx.: 500 mm
Module range from/to: 0.3 to 1.3 module
Total drive approx.: 24 kW - 380 V - 50 Hz
Total weight approx.: 10,000 kg
Accessories / Special equipment:
- Workpiece feeder by KBH, parallel to the machine, currently set up for feeding and unloading shaft-shaped workpieces approx. 16 Ø x 200 mm long with prism conveyor belt and lifting station for 2 shafts (raw/finished part) in the clamping area, as well as with workpiece position control device.
- Originally, the outer gears (Zz = 25), approx. 32 mm Ø x 14 mm long, workpiece Ø approx. 80 x 80 mm long, were rolled on so-called planetary carriers (automotive).
- Various accessories, separate control cabinet, separate hydraulic unit 900 L, coolant system in the machine, control panel with plain-text error messages, etc.
ROTO FLO machines are ideal for series production of smaller gears/profiles and are significantly more economical than gear hobbing.
The workpieces are clamped between centers and profiled by synchronised, counter-rotating rack-type tools. The material is displaced and shaped by the increasing profile height in the rack tool. In the tool’s calibration zone, profile and surface quality are optimized. No run-out of the profile is necessary, as is required with milling or shaping. The machine is characterized by an extremely robust design. The tools can achieve service lives of 25,000 to 100,000 pieces, even for helical gearing.
Isdpfx Acet Hw D Dsuobc
Condition : very good - assembled in our warehouse and ready for demonstration
Delivery : from stock - as inspected
Payment : net - upon receipt of invoice
We look forward to your order. Further cold rolling machines and other gear machining equipment always available in our range.
mažas skelbimas

1 242 km
Horizontalios krumpliaračių frezavimo staklės
MIKRONA 33/1
Skambinti
Sąlyga: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm
Wheel width 150 mm
Module – max. 2.5
Isdpfxet Hw D Rj Acujbc
Module – min.
Total power requirement 10 kW
Machine weight approx. 2,400 kg
Fully automatic hobbing machines for worm gear cutting
Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15
TECHNICAL DATA:
Max. wheel diameter without parts magazine approx. 80 mm
Max. wheel diameter with parts magazine approx. 50 mm
Max. module 2 / 2.5
Axial cutting length approx. 150 mm
Max. workpiece installation length approx. 200 mm
Milling slide swivels up to 90 degrees
Cutter – diameter 24 – 50/63 mm
Max. radial travel of the milling slide 0–14/18 mm
Max. milling cutter shift 25 mm
Cutter speeds 212 – 2,000 rpm
Axial feed rate stepless 0.05 – 4.0 mm/rot.
Radial feed rate stepless 0.2 – 200 mm/min.
Milling spindle drive 3 kW
Total drive approx. 10 kW – 50 Hz – 380 Volt
Weight approx. 2,400 kg
Accessories / Special equipment:
Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter,
program numbering, and 30-position digital error display.
Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and
then inserted into the loading unit.
The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously.
Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled.
The complete loading device is enclosed with Plexiglas.
Hydraulic workpiece clamping device with collets and hydraulic ejector
Separate coolant system with magnetic separator * separate hydraulic unit * various change gears
Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power.
Machine is set up for cutting worm shafts/armature shafts
used in variable transmissions for automotive seat adjusters, window regulators, etc.
mažas skelbimas

1 242 km
Vertikalios krumpliaračių frezavimo staklės
LORENZF 400
Skambinti
Sąlyga: naudotas, Gamybos metai: 1977, Wheel diameter - max. 400 mm
Wheel width 280 mm
Module - max. 4
Module - min. 1
Total connected load 15 kW
Machine weight approx. 6000 kg
Space requirement approx. ... m
LORENZ
Universal Gear Hobbing Machine
Type F 400 Year of manufacture 1977 S/N 8687
_____
Min./max. wheel diameter 400 mm
Module range 1 - 4
Number of teeth approx. 8 – 210
Milling width approx. 280 mm
Max. workpiece installation length approx. 450 mm
Milling slide swiveling up to 60°
Cutter size (diameter x length) 160 x 220 mm
Cutter shifting max. 180 mm
Cutter speeds 125-500 rpm
Table diameter x bore 375 x 80 mm
Feed range:
axial 0.31 - 4.00 mm/rev
Ibjdpfx Acjt Hw Hxsusc
radial 0.12 – 1.60 mm/rev
tangential 0.035 – 4.5 mm/min
Milling spindle drive approx. 8 kW
Total drive power approx. max. 15 kW - 380 V - 50 Hz
Weight approx. 6,000 kg
Accessories / Special features
• Multiple milling programs selectable for climb and conventional milling,
as well as for radial/axial milling processes, possibly worm gear milling
• Universal milling head with cutter shifting
• Hydraulic workpiece clamping on table and hydraulic tailstock
• Hydraulically folding counter-holder connection for easier loading
• Differential for helical gearing
• Infinitely variable speed control, display for speed and amperage
• Change gears, various accessories, coolant system
* Very robust construction
Condition: good – will be demonstrated shortly
Delivery: ex stock – as inspected
Payment: upon receipt of invoice, strictly net
mažas skelbimas

1 242 km
Vertikalios krumpliaračių frezavimo staklės
LIEBHERRLC 82
Skambinti
Sąlyga: naudotas, Gamybos metai: 1995, Wheel diameter - max. 80 mm
Wheel width 120 mm
Module - max. 3
Module - min. 1
Control: SIEMENS 840 C
Total power requirement: 30 kW
Machine weight approx. 7,500 kg
Footprint approx. [space missing] m
LIEBHERR
CNC-controlled gear hobbing machine
Type: LC 82
Year of manufacture: 1995 # 0836
---
Wheel diameter max. 80 mm
Module 1 – 3
Helix angle +/- 45°
Distance table center to tool center: 15 – 160 mm
Vertical travel of milling slide: 250 mm
Shift range/tool traverse: 180 mm
Min. number of teeth: 3
Cutter Ø x length approx.: 90 x 200 mm
Ibedpjt Hw R Defx Acusc
Cutter speeds up to max.: 800 rpm
Feeds in axial/radial/tangential: 20/4/5 mm/rev
Max. workpiece clamping length: 250 mm
Spindle drive approx.: 8 kW
Total drive approx.: 30 kW - 400 V – 50 Hz
Total weight approx.: 7,500 kg
Accessories / Special equipment:
• SIEMENS CNC control type 840 C for 6 axes (i.e. cutter drive/Table drive/Swivel angle of the milling head/axial feed/radial feed/tangential feed) with gear-specific user interface and diagnostic functions for rapid troubleshooting.
• With device for automatic insertion of the hob into the tooth gap
• Automatic shifting of the cutter axis
• Automatic workpiece loading unit SSL = quick swivel loader using a mechanical step transmission and cam disk for fast loading times, with 3-way rotary gripper for blank gripping/working position/unloading.
Current workpiece size Ø 30 x 120 mm, helical gearing (pinions)
• Workpiece feeding by means of plate chain conveyor (PKB) for workpieces with positive-fit carrier. Additional feed belt for raw and finished parts
• Chip conveyor, complete working area enclosure, intermediate coolant tank with pump
Complete working area enclosure with sliding door and oil mist extraction, etc.
The machine can also be used for dry gear cutting.
Condition: satisfactory to good – under power and ready for demonstration, compact design!
Delivery: ex-stock – as inspected
Payment: net cash – on receipt of invoice
mažas skelbimas

1 242 km
Kūginių krumpliaračių šlifavimo staklės
GLEASON120 / 888 W
Skambinti
Sąlyga: naudotas, Gamybos metai: 1980, Wheel diameter - max. 1010 mm
Wheel width 0 mm
Module - max.
Module - min.
Total power requirement 15 kW
Machine weight approx. 9.5 t
Ijdpfx Acot Hwnijuobc
Space requirement approx. m
G L E A S O N (USA)
"CURVIC-Coupling" - Automatic Coupling Grinding Machine
Type 120 (888), Year of manufacture 1980 Serial no. 763402
Max. tooth height 10 mm
Max. swing diameter of workpiece 1,010 mm
Max. outside diameter of CURVIC teeth 610 mm
Retraction of workpiece slide plate 216 mm
Max. distance grinding wheel to workpiece nose 90-430 mm
Max. workpiece weight incl. clamping device approx. 500 kg
Number of teeth range 32 - 150
Grinding wheel diameter approx. 152 - 320 mm
Grinding wheel speed, stepless 0 - 3,600 RPM
Workpiece spindle bore 60 mm
Total drive power approx. 15 kW - 380 V - 50 Hz
Weight approx. 9,500 kg
Accessories / Special equipment:
Automatic rough grinding and finish grinding by means of presettable counters and integrated feed curves
Counter for number of teeth
Counter for number of dressing cycles
2 mounted dressers with 3 dressing diamonds for external dressing, internal dressing, and dressing wheel tip
Mounted index plate for 48 teeth
Separate coolant unit with band filter, separate hydraulic system
Freestanding oil mist extraction unit by TRION, various small parts
mažas skelbimas

1 242 km
Skutimosi ratukų galandinimo staklės
HURTHSRS 400
Skambinti
Sąlyga: naudotas, Gamybos metai: 1977, Grinding diameter - max. 400 mm
Grinding width 0 mm
Module - max.
Module - min.
Total power requirement 3 kW
Machine weight approx. 4.2 t
Space requirement approx. m
Dressing wheel - Ø min./max. 64 - 320 mm
Grindable module size 1 - 12 Modul
Max. dressing wheel width 40 mm
Number of teeth 13 - 240
Roller diameter 73 - 320 mm
Workpiece slide speed 5 - 20 - 30 - 40 teeth/minute
Grinding wheel speed 690 rpm
Ibsdpfx Aet Hwnvscusc
Grinding wheel diameter 762 mm
Grinding wheel swivel (contact angle) 5-21°
Grinding slide swivel (helix angle) 2x 35°
Grinding slide vertical adjustment 240 mm
Dresser speed 1/0.5/0.25 m/minute
Grinding spindle drive / total drive 1.1 / 3 kW - 380 V - 50 Hz
Weight approx. 4,200 kg
Accessories / Special equipment:
The machine is suitable for grinding external and internal rack wheels as well as for grinding master gears or cutter wheels for gear shaping machines.
Unfortunately, no further accessories are available for the machine, so it is an investment as a secondary machine if suitable accessories are already available.
mažas skelbimas

1 242 km
Pavaros bandymo mašina
KLINGELNBERGPFSU 1600
Skambinti
Sąlyga: naudotas, Gamybos metai: 1975, Wheel diameter – max. 160 – 1,600 mm
Wheel width 250 mm
Module – max. 20
Module – min. 1.5
Total power requirement 1 kW
Machine weight approx. 3 t
Required space approx. m
K L I N G E L N B E R G
Universal Gear Testing Machine for Involute and Lead Inspection
Type: PFSU 1600
Year of manufacture: 1975, modernized in 1995
# B 2281
Working range:
Min./max. gear diameter: 160 – 1,600 mm
Module range: 1.5 – 20 mm
Max. gear width: 250 mm
Probe carriage stroke approx.: 300 mm
Max. helix angle: 0 – 90°
Max. workpiece length between centers: approx. 1,150 mm
Tailstock offset: 450 mm
Chart recorder magnification: 50/250/500/1000 x
Max. test gear weight approx.: 4,000 kg
Weight approx.: 3,000 kg
Total drive: approx. 1 kW – 380 V – 50 Hz
Suitable for testing:
– Gear profile (involute)
– Tooth direction (helix angle/lead) on internal and external gears, hobs, gear shaper cutters, and worms, etc.
– Gear runout, surface roughness
– Determination/reconstruction of the base circle and helix angle, etc.
Accessories / Special features:
– Optical base circle and angular setting, no base circle discs required anymore
– High workpiece weight achievable by design; motorized and manual operation via handwheels
– Rotating index table, Ø 480 mm, for setting up larger gear bodies with 2 sets of different extension supports (400 mm and 470 mm long) for gear diameters up to max 1,600 mm
– Counter-support AV 17 for max. workpiece length between centers of 1,150 mm
– Separate electrical cabinet for controlling manual movements
– Includes GFM Computer Type ZMP 20 e with software for automatic gear measurement, updated in English and optionally in German; program update to the current version V 21.17 available; ideal for creating modern inspection reports with graphics, also visually displayed on monitor; other subprograms, HP printer, flat-screen monitor
– Various probe inserts, small parts, as well as height-adjustable mount for a pitch inspection device (device not included, but mounting available and rear-mounted), leveling feet, etc.
Iedpfxet Hwpte Acusbc
Condition: Very good – ready for demonstration; professionally dismantled and assembled.
mažas skelbimas

1 242 km
Kūginių krumpliaračių šlifavimo staklės
GLEASONPHOENIX 200 HG
Skambinti
Sąlyga: naudotas, Gamybos metai: 1997, Wheel diameter - max. 215 mm
Wheel width 40.65 mm
Module - max.
Total power requirement 20 kW
Machine weight approx. 10 t
G L E A S O N (USA)
CNC Grinding Machine for Spiral and Hypoid Bevel Gears
Model PHOENIX HG 200
Year of construction 1997
Max. external diameter of workpiece: 215 mm
Tooth profile size (height x width): 16 mm x 40.65 mm
Number of teeth: 5 - 200
Maximum gear ratio: 1 : 10
Grinding wheel diameter: 51-190 mm
Grinding wheel speed: 1,000 – 6,000 rpm
X-axis (horizontal): 152 mm
Ibodpfxot Hwxhj Acuec
Y-axis (vertical): 178 mm
Z-axis (sliding base): 304 mm
Distance machine center to workpiece spindle face: 115 mm
Axis speed: 125 mm/sec
Workpiece spindle speeds: 0-30 rpm
Workpiece spindle bore, tapered: 3 29/32 inches
Total drive approx.: 20 kW - 380 V – 50 Hz
Weight approx.: 10,000 kg
Accessories / Special equipment:
• FANUC – 7-axis CNC control type 150 MB with monitor and direct data entry, automatic calculation of all workpiece and grinding parameters
• Large, sophisticated coolant system with filtration, band filter, etc.
• Powered grinding wheel dressing device with CNC-controlled compensation for wheel form and diameter after each dressing cycle
• Gear grinding can be performed either as single part processing with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. Grinding wheels can be made of CBN or conventional “dressable” aluminium oxide, depending on cost. Grinding with a conical wheel provides advantages in terms of heat management and contact pattern quality.
Therefore, these bevel gear sets (automotive industry) can be manufactured in high quality, with consistent accuracy, cost-efficiently, and with short setup times. Please refer to the brochure copy on our website for additional details.
Condition : very good – can be demonstrated under power
Delivery : ex stock - as inspected
Payment : strictly net – upon receipt of invoice
We look forward to your order. Further gear manufacturing machines always in stock.
X-axis (horizontal): 152 mm
Y-axis (vertical): 178 mm
Z-axis (sliding base): 304 mm
Distance machine center to workpiece spindle face: 115 mm
Axis speed: 125 mm/sec
Workpiece spindle speeds: 0-30 rpm
Workpiece spindle bore, tapered: 3 29/32 inches
Total drive approx.: 20 kW - 380 V – 50 Hz
Weight approx.: 10,000 kg
Accessories / Special equipment:
- FANUC – 7-axis CNC control type 150 MB with monitor and direct data input, automatic calculation of all workpiece and grinding parameters
- Large, sophisticated coolant system with filtration, band filter, etc.
- Powered grinding wheel dressing unit with CNC dressing control for automatic form and diameter compensation after each dressing
- Gear grinding can be performed either as single part processing with a conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made of CBN or conventional dressable aluminum oxide wheels (cost dependent). Grinding with a conical grinding wheel...
mažas skelbimas

1 242 km
Pavarų honavimo staklės
FÄSSLERD - 250 / H5
Skambinti
Sąlyga: naudotas, Gamybos metai: 1983, Workpiece diameter: 250 mm
Centre distance: 0 mm
Max. honing length: mm
Iedot Hwzpopfx Acuobc
Max. module: 5
FÄSSLER (Switzerland)
Conventional gear honing machine
Model D-250, Year of manufacture: 1983, Serial No. 31 205.049.22
_____
Gear diameter: 10 - 250 mm
Module: 1 - 5
Gear length / table stroke max.: 500 mm
Centre height of tailstocks: 220 mm
Max. workpiece weight: 50/100 kg
Swiveling range of the honing head: +/- 35°
Honing tool speeds: 20 - 500 rpm
Honing tool size / width: 300 / 40 mm
Workpiece speeds: 500 - 3,000 rpm
Total cross slide travel: 270 mm
Rapid cross slide traverse: 50 mm
Mechanical infeed of cross slide: 1 - 8 mm/Ø
Roughing / finishing infeed: 1-29 / 0.2-2.8 μm/sec.
Hydraulic table speed: 0 - 6 m/min
Total drive power: 5.5 kW - 380 V - 50 Hz
Weight: 3,200 kg
Accessories / special equipment:
- Pre-settable machining parameters via counters and control devices for automatic operation, with workpiece counter
- All roughing and finishing infeeds are set via decade switches; table reversing times and rapid feed times can be adjusted via potentiometer (1 s = 0.04 mm)
- Ampere meter, etc.
- Possibility for crowning and taper honing via templates, possible off-centre as well (workpiece must be pre-machined accordingly)
- Separate honing oil unit with magnetic separator and fine filter
- Mechanical tailstocks for manual loading, oil mist separator
- Sliding doors with foot switch, separate hydraulic system
mažas skelbimas

1 242 km
Pavaros bandymo mašina
MAHR894 C
Skambinti
Sąlyga: naudotas, Gamybos metai: 1980, Maximum wheel diameter: 400 mm
Wheel width: N/A mm
Ibedpfx Aot Hw Ebecuec
Maximum module: 5
Minimum module:
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m
Manual double-flank rolling tester
mažas skelbimas

1 242 km
Pavarų formavimo staklės
LORENZLS 400
Skambinti
Sąlyga: naudotas, Gamybos metai: 1973, Maximum wheel diameter: 400 mm
Wheel width: 75 mm
Total power requirement: 25 kW
Machine weight: approx. 7,000 kg
LORENZ
Ibodpfx Acet Hw Hleuec
High-performance gear shaping machine
Model: LS 400
Year of manufacture: 1973 S/N: 11 884
_____
Max. external wheel diameter: 400 mm* (potentially larger)
Max. internal gearing diameter: approx. 350 mm
Max. wheel width: 75 mm
Module range: 0.5 – 6
Stroke length: approx. 82 mm
Adjustable stroke position: 0 – 80 mm
Ram clearance (ram spindle / machine body): 250 mm
Spindle taper: approx. MT5
Strokes (roughing/finishing): 118 – 1,000 rpm
Table size: 400 mm
Table bore: 125 mm
Installation height between table and shaping head:
min./max.: approx. 280/350 mm
Fixed ram clearance: 250 mm
Axial table travel: approx. 295 mm
Approximate number of teeth: 12 – 150/300
Feed range
Tooth depth: 0.01 – 0.063 mm/stroke
Radial feed (for tool Ø 125): 0.125 – 3.150 mm/stroke
Spindle/total drive: approx. 19 kW / 25 kW – 380 V, 50 Hz
Weight: 7,000 kg
Accessories / Special features:
• Built-in intermediate plate 200 mm for shaping head elevation
• Hydraulic workpiece clamping (RINGSPANN brand) integrated in table for flat workpieces
• Automatic stroke and automatic feed changeover for roughing and finishing in up to 4 cuts
• Separate control and electrical cabinet, separate hydraulic unit
• Integrated coolant system with magnetic chip conveyor, two-hand operation
• Approx. 40 change gears, 4 shaping tool holders, 2 pulleys for stroke drive, etc.
Condition: Good, operational and can be demonstrated under power
Delivery: Ex-stock – as inspected
Payment: Net – upon receipt of invoice
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

mažas skelbimas

1 242 km
Stovo frezavimo staklės
DONAU-KNAPPUZFM - V 300 H
Skambinti
Sąlyga: naudotas, Gamybos metai: 1980, Milling length: 1750 mm
Milling width: 260 mm
Module – max.: 10
Module – min.: 12
Total power requirement: 8 kW
Machine weight approx.: 4500 kg
Space requirement approx.: m
D O N A U - K N A P P
Universal Rack Milling Machine
Model UZFM - V 300 H
Iodpet Hxagsfx Acuobc
Year of manufacture: 1980 # 80-234x
-----
Max. gear cutting length: 1,750 mm
Milling travel / max. cross milling width: 260 mm
Helical gearing up to: 30°
Module range steel/grey cast iron max.: 10 to 12
Effective clamping surface (table): 275 x 1,830 mm
Mounting height under milling spindle axis min./max.: 150 / 430 mm
Milling cutter diameter min. / max.: 108 + 2 x cutting depth / max. 165 mm
Max. milling cutter width unsupported / with counter support: 50 / 140 mm
Milling arbor diameter max.: 22 - 50 mm
9 spindle speeds: 29 – 178 rpm
Milling slide swivels right/left: 30°
Milling spindle head swivels right/left: 30 / 45°
Infinitely variable feed (milling slide): 0 – 600 mm/min
Rapid return: 2,000 mm/min
Milling spindle drive approx.: 4 kW
Total drive: 8 kW - 400 V - 50 Hz
Weight: 4,500 kg
Accessories / Special Equipment:
• Automatic milling sequence control via cam track on milling head slide and table slide, with skip function (automatic bypass of non-machining areas) and pendulum milling operation (synchronous milling on one half of the table with workpiece changeover on the second half)
• Hydraulic workpiece clamping system, continuous approx. 260 x 1800 mm, max. clamping width 140 mm, clamping height approx. 60 mm, with dedicated hydraulic unit and electrical release
• Manual fine adjustment of the table (0.001 mm), e.g., for precise positioning into a pre-milled gearing
• Various change gears (approx. 10 pcs), 2 arbor mandrels, central lubrication with impulse, built-in hydraulic system, separate coolant device, separate control cabinet, various used rack milling cutters
Price, ex stock plus VAT: € 49,500.--
This machine is particularly suitable for milling racks as well as for the production of broaching tools (undercutting by swiveling the milling head).
Condition: very good – ready for demonstration
Delivery: ex stock – as inspected
Payment: net – upon receipt of invoice
mažas skelbimas

1 242 km
Srieginių sliekų šlifavimo staklės
LINDNERGH 300-38
Skambinti
Sąlyga: naudotas, Gamybos metai: 1979, Workpiece diameter 320 mm
Thread length 300 mm
Iedpfxjt Hwnps Acuobc
Thread pitch mm
Total power requirement 90 kW
Machine weight approx. 12,000 kg
Space requirements approx. m²
Thread/worm grinding machine for steering worm
mažas skelbimas

1 242 km
Dantų šonų šlifavimo staklės
LIEBHERRLCS 282
Skambinti
Sąlyga: naudotas, Gamybos metai: 1999, Maximum wheel diameter: 280 mm
Wheel width: 330 mm
Module – max.: 5
Module – min.: 1
Control: LIEBHERR CNC
Total power requirement: 28 kW
Machine weight: approx. 12 t
Space requirement: approx. ___ m
LIEBHERR
CNC-controlled gear generating and profile grinding machine
Model: LCS 282
Year of manufacture: 1999 #1099
Max. wheel diameter: 280 mm
Module: 1 - 5
Helix angle: +/- 35°
Distance table center to tool center: 15 – 285 mm
Vertical grinding slide stroke: 330 mm
Shift/traverse path for tool: 200 mm
Min. number of teeth: 7
Grinding spindle position above table min./max.: 70 - 360 mm
Workpiece clamping length: 420 to max. 620 mm
Grinding worm/profile grinding wheel diameter: 145 x 210 / 175 mm
Grinding worm/profile tool speed: 2,500 – 10,000 rpm
Table rotation speed max.: 750 rpm
Spindle drive: 28 kW
Total drive approx.: 50 kW - 400 V – 50 Hz
Total weight approx.: 12,000 kg
Accessories / Special equipment:
• LIEBHERR CNC control type LH 90 GG: easy-to-program CNC control (B+R/IPC 5000) with gear-specific user interface and diagnostic features for quick troubleshooting. (Remote diagnosis also possible)
• Equipped with an automatic device for threading the grinding wheel into the tooth gap.
• The machine operates with three grinding processes:
a. Generating grinding using CBN grinding worms = fastest processing
b. Profile grinding with CBN profile grinding wheels (one or two wheels) = highest accuracy!
c. Combination of a and b (most economical solution): pre-grinding with grinding worm / finish grinding with profile grinding wheel in single-part processing
• Automatic shifting of the grinding worm or automatic positioning of the profile wheel
• Automatic workpiece loading device using a ring loader mounted on the counter column, which automatically moves raw and finished parts in and out. The workpieces are transported to the ring loader via a separately positioned FLEX LINK chain conveyor, picked up and removed. This enables unmanned production.
• Hydraulic workpiece clamping in the table, but without clamping devices. Tailstock slide on the counter column present but without tailstock. Slide stroke up to approx. 350 mm.
• Complete work area enclosure with sliding door and separate CO2 extinguishing system / IR sensor
No original coolant system (as central supply), and no dressing device supplied.
Condition: good to very good – powered, ready for demonstration, compact design!
Delivery: ex stock – as inspected
Ibedpfx Acst Hwu Asusc
Payment: strictly net – upon receipt of invoice
We appreciate your interest – a further 200 gear machining machines available from stock at all times.
mažas skelbimas

1 242 km
Dantytų briaunų frezavimo staklės
HURTHZK 200/1-TE CNC
Skambinti
Gamybos metai: 1991, Sąlyga: naudotas, Wheel diameter - max. 0 mm
Ibodot Hwv Hepfx Acujc
Number of teeth - max. 0
Module - max.
Module - min.
Total power requirement kW
Machine weight approx. t
Space requirement approx. m
CNC-controlled synchro ring milling machine
ideal for synchronizer rings, BWO control 785 H
Mes supaprastiname jums paiešką
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Krūminės apdirbimo staklės (335)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo