Krumpliaračių formavimo staklės
LIEBHERR WSC2000

Name: LIEBHERR WSC2000
Brand: LIEBHERR
Availability: InStock

Gamybos metai

2007

Būklė

Naudotas

Vieta

Grüsch

Krumpliaračių formavimo staklės LIEBHERR WSC2000

Duomenys apie mašiną

Mašinos pavadinimas:: Krumpliaračių formavimo staklės

Gamintojas:: LIEBHERR

modelis:: WSC2000

Gamybos metai:: 2007

Būklė:: naudotas

Kaina ir vieta

Vieta:: Lager

Skambinti

Pasiūlymo informacija

Skelbimo ID:: A20873002

Nuorodos numeris:: 1006-18100

Atnaujinimas:: paskutinį kartą atnaujinta 25.03.2026

aprašymas

Maximum gear diameter: 2000 mm
Workpiece diameter: 2700 mm
Table diameter: 1500 mm
Maximum module: 22
Control system: 840D
Rotational speed: 3.5 rpm
Maximum table load: 20,000 kg
Ppsdpfx Aox R U Hmjdzot
Center distance: 70...1220 mm
Stroke length: 30...330 mm
Strokes per minute: 10...200 spm
Total power requirement: 138 kW
Machine weight approx.: 38 t
Space requirement approx.: 11x5 m

Machine:
Full CNC machine with electronic hobbing synchronization for C and D axes and digital INDRAMAT drive technology.
Self-rigid welded machine bed construction.
Radial axis (X-axis) with hardened guideways, sliding guide with wrap-around,
Longitudinal guide with recirculating roller shoes.
Precision ground, preloaded ballscrew with backlash-free preloaded nut.
Digital AC drive technology with backlash-free gearbox.
Linear measurement system for radial positioning.
Free-standing machine table with electrohydraulically backlash-free preloaded twin worm gear, segment gear diameter 1365 mm, hydrostatic axial and radial bearings, automatic workpiece weight compensation.
Table bore diameter 500 mm continuous, open at the bottom.
Water-cooled digital AC servo motors.
The machine must be installed on a foundation.

Column:
Machine column as highly rigid cast construction for 1200 mm axial travel.
Axial axis (Z-axis) with hardened guideways, sliding guide, longitudinal guide and wrap-around with recirculating roller shoes.
Precision ground ballscrew with backlash-free preloaded nut.
Digital AC drive technology.
Encoder for axial positioning.

Shaping Head:
SK 4.1 with hydraulic NC servo drive for shaping spindle movement
and gear cutting wheel lift-off, stroke length 330 mm, shaping spindle diameter 160 mm.
Hydrostatically mounted shaping spindle, straight and side guidance of the lift-off.
Maximum tool diameter: 300 mm.
Drive motor power: 30 kW
Number of strokes: 10 - 200 spm, stroking speed: 5 - 45 m/min.
Shaping spindle speed for working and return stroke can be programmed independently. Spindle speed is constant in the cutting area.
Maximum gear cutting wheel speed: 10 rpm, digital AC drive technology.
Gear cutting wheel lift-off direction can be manually reversed for internal and external gear cutting.
Shaping spindle axis can be manually adjusted up to 50 mm off machine center to avoid return stroke collision of the gear cutting wheel.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Dokumentai

20873002-01.pdf
20873002-02.pdf
20873002-03.pdf

Tiekėjas

Registruotas nuo: 2008

118 Skelbimai internetu

Skambinti

Siųsti užklausą

Telefonas & Faksas

+49 89 44... skelbimai

+49 89 31... skelbimai

Faksas:

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Vertikalus apdirbimo centras Mazak Nexus VCN-410A

Bienne

1 455 km

Vertikalus apdirbimo centras
MazakNexus VCN-410A

Skambinti

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 163341, Country of origin: UK Voltage: 400V 3-phase AC 50/60Hz max 58A Dimensions: 200 x 260 x 250 cm Net machine weight: 5010 kg TECHNICAL SPECIFICATIONS Capacities Table dimensions: length 900 mm / depth 410 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 510 mm Distance spindle nose to table surface: min 150 mm, max 660 mm Distance spindle center to column: 540 mm Maximum table load: 500 kg Spindle Speed: 40 – 12,000 rpm Power (5 min): 18.5 kW Power (10 min): 15 kW Power (30 min): 10 kW Continuous power: 7.5 kW Feed rates Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900 x 410 mm T-slot size (ISO R299): 18 mm / Number: 3 / Spacing: 125 mm Permissible load: 500 kg Distance floor to tabletop: 780 mm ATC Tool Magazine Number of tools: 30 pcs Tool selection: random access; automatic bi-directional search Tool holder: MAS BT-40 Max tool diameter in magazine: Ø 80 mm (without adjacent tool: Ø 125 mm) Max tool weight: 8 kg Maximum magazine load: 120 kg Max tool length: 350 mm Tool change time: 2.9 sec (chip-to-chip) Lubricant reservoir: 1.8 L Axis lubrication reservoir: 260 cm³ Spindle coolant tank: 16 L Pjdpfx Adew T Tp Rozept Hydraulic pressure tank: 460 cm³ Coolant reservoir: 200 L Compressed air: 0.5 to 0.9 bar Capacity: 200 L/min All technical data is supplied subject to possible error or omission and is provided without guarantee.

Peržiūrėti detales

Mažas skelbimas

Paviršiaus šlifavimo staklės CR_113 Okamoto PSG 52 UDX

Burgoberbach

1 118 km

Paviršiaus šlifavimo staklės CR_113
OkamotoPSG 52 UDX

Skambinti

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 650 mm, padavimo eiga Y ašimi: 400 mm, padavimo ilgis Z ašis: 230 mm, veleno greitis (maks.): 3 000 aps./min, For sale is a surface grinding machine, brand Okamoto, model PSG 52 UDX. The machine is well-maintained and ready for immediate use. Technical data: Year of manufacture: 1989 Podpfx Aewnnbrsdzspt Grinding area: - X-axis: 650 mm (manual) - Z-axis: 230 mm - Y-axis: 47 mm – 400 mm Max. vertical travel (lower edge of a new wheel, with ⌀ 205 mm): min./max. – table Grinding wheel diameter: max. ⌀ 225 mm Spindle speed range: 3000 rpm (stepless speed regulation) Table feed: 0.3 – 25 m/min (hydraulic, X-axis) Ground table area: 550 x 200 mm Magnetic chuck: 500 x 200 mm (standard size) (load incl. magnet max. 200 kg) Transportation and loading can be organized across Europe for an additional charge, upon request. Prices are subject to VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Peržiūrėti detales

Mažas skelbimas

Metzingen

1 242 km

Pavarų formavimo staklės
LORENZLS 400

Skambinti

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice Ppedpfx Adet Hww Djzot

Peržiūrėti detales

Mažas skelbimas

Krumpliaračių formavimo staklės LORENZ SN 8 / 630

Offenbach an der Queich

1 256 km

Krumpliaračių formavimo staklės
LORENZSN 8 / 630

Skambinti

Būklė: geras (naudotas), Gamybos metai: 1975, Ratų skersmuo - maks. 630 mm y eiga 560 mm Ratų plotis 180 mm Modulis - maks. 8 Modulis - min. 1 Rušinys diametras 750 mm Stalo skersmuo 450 mm Tvirtinimo ašies skersmuo 58 mm Špindelio eiga 200 mm Reguliavimo diapazonas 230 mm Atstumas tarp špindelio ir stalo 225–450 mm Tvirtinimo kūgis Morse 4 Giluminis padavimas 0,03 mm/eiga Pjovimo padavimas 10n: 0,18–0,74 mm/eiga Eigos dažnis 12n: 47–300 eiga/min Elektrinė versija – Įtampa/Dažnis 380/50 V/Hz Mašinos svoris apyt. 5500 kg Mašina buvo pakelta 100 mm. Ppodpfx Aeyb Sx Tedzst

Peržiūrėti detales

Mažas skelbimas

Cilindrinio šlifavimo staklės - Išorė STUDER RHU 500

Trittau

890 km

Cilindrinio šlifavimo staklės - Išorė
STUDERRHU 500

Skambinti

Būklė: naudotas, Šlifavimo skersmuo 250 mm Šlifavimo ilgis 500 mm Šlifavimo disko matmenys 400 x 50 mm Mūsų vertinimu, staklės yra geros naudotos būklės ir gali būti apžiūrimos su elektros įtampa susitarus dėl termino. Techninės savybės ir priedai: - Centro taurelė Ppsdpexzuylefx Adzjt - įvairūs priedai Priedai, nuotraukose matomi įrankiai ir tvirtinimo priemonės į pristatymo apimtį įtraukiami tik tuo atveju, jei tai nurodyta papildomoje informacijoje. Techniniai duomenys, informacija gali būti keičiami ar atsirasti klaidų, taip pat galimas tarpinis pardavimas!

Peržiūrėti detales

Mažas skelbimas

Cilindrinė šlifavimo mašina Studer S30-12

Zuchwil

1 437 km

Cilindrinė šlifavimo mašina
StuderS30-12

Skambinti

Būklė: geras (naudotas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Distance Between Centres: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Ppjdpevca Izjfx Adzot Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Minimum Automatic Travel: 1.5 mm Max. Travel: 400 / 700 / 1020 mm Max. Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Feed Travel with Handwheel: 20 mm Maximum Plunge Depth: 1.7 mm Grinding Spindle Headstock Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Rotational Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Headstock Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Taper Mount: Morse 5 Collets: W25 Tailstock Taper Mount: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No liability is accepted for the correctness, completeness or accuracy of the information provided.

Peržiūrėti detales

Mažas skelbimas

CNC tekinimo ir frezavimo centras Gildemeister Twin 90

Berlingo

1 452 km

CNC tekinimo ir frezavimo centras
GildemeisterTwin 90

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 35 598 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 07400004031, ašies variklio galia: 20 W, veleno greitis (min.): 3 250 aps./min, veleno greitis (maks.): 5 000 aps./min, strypo praėjimas: 90 mm, bendras svoris: 10 000 kg, capacità barra 90 mm - 2 torrette motorizzate a 12 posizioni - asse Y sulla torretta superiore - contropunta - CNC Siemens 840D powerline - macchina in condizioni perfette, sempre utilizzata con olio - dotazione utensili molto, molto completa - caricatore di barre LNS Sprint S2. Pedpfjuyx Hzsx Adzopt

Peržiūrėti detales

Mažas skelbimas

Vertikalios krumpliaračių frezavimo staklės GLEASON- PFAUTER P 2400/2800

Vokietija

999 km

Vertikalios krumpliaračių frezavimo staklės
GLEASON- PFAUTERP 2400/2800

Skambinti

Būklė: naudotas, Gamybos metai: 2008, Siemens 840D Control Gear Hobbing Machines for Large Gears Flexible and universal gear hobbing of gears Large hobbing machines from Gleason deliver maximum productivity for roughing and finishing cylindrical gears applied across numerous industries: wind turbines, industrial gear units, mining and shipbuilding, gear production, and many others. The guideways are wide and equipped with hydraulically preloaded guides, which in combination with a separate linear guide and backlash-free rollers, ensure precise carriage movements at any feed rate. The table design provides optimal conditions for absorbing and transferring cutting forces to the machine base. The use of hydrostatic table bearings, in conjunction with the proven backlash-free double worm gear drive, guarantees precise table motion as well as the highest flatness and concentricity accuracy of the worktable. This holds true regardless of substantial fluctuations in workpiece weight and/or high machining forces. The motorized hobbing heads for external and internal gearing are tailored to the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal hobbing heads. The drive's performance range takes into account future tool developments. Naturally, the hobbing head drive is also backlash-free. These machines are particularly well-suited for the use of state-of-the-art cutting tool materials, regardless of whether dry or wet machining is preferred. Pjdpfx Adowzypnszspt

Peržiūrėti detales

Mažas skelbimas

Cilindrinio šlifavimo staklės - Universalios TOS Hostivař BUA 20

Vokietija

872 km

Cilindrinio šlifavimo staklės - Universalios
TOS HostivařBUA 20

Skambinti

Būklė: naudotas, Technical details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table feed rate: 0.05-4.5 m/min, stepless Speed: grinding spindle 1,780 / 2,050 rpm Speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2,200x280 mm Table swivels both sides: 9° forward, 10° backward Ppedpfxeu Ng Dgo Adzet Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDING MACHINE without internal grinding device - For precision grinding of external (and internal) as well as tapered surfaces. - Grinding spindle head infeed manually or hydraulically - Hydraulic, stepless table feed - Grinding spindle swivels 60° - Workpiece spindle head swivels 90°, with Morse taper MK 4 - Tailstock with Morse taper MK 3 Equipment: - Wheel dressing device - Coolant tank incl. pump and feed line in current condition.

Peržiūrėti detales

Mažas skelbimas