Cilindrinio šlifavimo staklės - Universalios

TOS Hostivař BUA 20

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) Nedpfxsqt Dmye Af Ijcl - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 22012101118, veleno skylė: 21 mm, centro aukštis: 100 mm, tekėjimo skersmuo: 200 mm, įvesties srovės tipas: Oro kondicionierius, tekinimo skersmuo virš slankiojančio stalo: 110 mm, įėjimo įtampa: 230 V, veleno greitis (maks.): 2 500 aps./min, sukimosi greitis (maks.): 2 500 aps./min, sukimosi greitis (min.): 150 aps./min, veleno greitis (min.): 150 aps./min, galinis spintos įvorės tvirtinimas: MK 2, veleno tvirtinimas: MK 3, bendras plotis: 425 mm, bendras ilgis: 830 mm, bendras aukštis: 360 mm, Griebtuvėlio eigos ilgis: 65 mm, Įranga: sūkių greitis be galo kintamas, Darbo sritys Didžiausias ruošinio aukštis: 100 mm Didžiausias atstumas tarp centrų: 300 mm Didžiausias apsisukimų skersmuo virš planšlito: 110 mm Gulto plotis: 100 mm Sūkio dažnių sritis Sūkio greičio valdymas: elektroninis reguliavimas Sūkio dažnių skaičius: 2 Sūkio dažnių sritis: 150–2500 aps./min Elektriniai duomenys Pavaros variklio galia: 0,6 kW Maitinimo įtampa: 230 V Dažnis: 50 Hz Standartai ir sertifikatai Standartas: DIN EN 55011 EMC klasė: C1 Velenas Veleno skylė: 21 mm Maks. įrankio laikiklio aukštis: 12 mm Griebtuvo praleidimo skersmuo: 20 mm Veleno kūgis: MK 3 Gręžtuvo atrama Gręžtuvo atramos kūgis: MK 2 Gręžtuvo atramos pinolės eiga: 65 mm Žingsniai Metrinis žingsnis: 0,25–3 mm/aps. Metrinių žingsnių skaičius: 14 Colinis žingsnis: 44–8 sriegių/1" Colinių žingsnių skaičius: 12 Važiavimo eiga Ncodpfx Afjw Imhvj Iol Viršutinio skersinio eiga: 55 mm Planinio skersinio eiga: 75 mm Gulto skersinio eiga: 300 mm Padavimo eiga Išilginio padavimo sritis: 0,1–0,2 mm/aps. Išilginio padavimo skaičius: 2

Sąlyga: geras (naudotas), Gamybos metai: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical specifications – Main data: - Table surface: 605 x 300 mm - Max. longitudinal table travel (manual): 750 mm - Cross table travel: 340 mm - Grinding height between table and new grinding wheel min/max: 22.5 / 322.5 mm - Standard magnetic chuck size: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X-axis / Longitudinal travel: - T-slots (quantity x width): 3 x 17 mm - Table feed, hydraulic: 0.3–25 m/min - Travel per handwheel revolution: 47 mm Y-axis / Vertical movement: - Automatic vertical feed – coarse, 12 steps: 0.001–0.03 mm - Automatic vertical feed – fine, 8 steps: 0.001–0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Scale division on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes (Ausfeuerhübe): 0–5 - Rapid traverse: 400 mm/min Z-axis / Cross travel: Nedpow Dvkaefx Af Iecl - Automatic intermittent cross feed: 0.5–20 mm - Automatic continuous cross feed / rapid traverse: 0.1–1.0 m/min - Travel per handwheel revolution: 5.0 mm - Scale division on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 rpm Accessories: various grinding wheels Documentation included

Sąlyga: geras (naudotas), Wheel diameter – max. 180 mm Nsdpfeuayw Sex Af Ijcl Wheel width 58 mm Module – max. 4 Module – min. 0.5 Strokes per minute 200 – 710 Total power requirement 3 kW Machine weight approx. 3 t Good condition, change gears, etc. Year of manufacture approx. 1964

Gamybos metai: 1969, Sąlyga: paruoštas naudoti (naudotas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, complete with documentation; on-site inspection is possible. Njdpfxeqzkdme Af Iecl

Sąlyga: naudotas, Gamybos metai: 2007, Swing diameter: 300 mm Turning length: 600 mm Njdpfjxn Amtsx Af Iecl Control: FANUC 18i-TB Swing diameter over cross-slide: 230 mm Travel X1: 165 mm Travel Z1: 700 mm Travel X2: 190 mm Travel Z2: 720 mm Travel Y: +/- 50 mm Main spindle bore: 76 mm Main spindle speed: 5,000 rpm Main spindle motor: 22 kW Spindle torque: 208 Nm Sub-spindle bore: 76 mm Sub-spindle speed: 5,000 rpm Sub-spindle motor: 22 kW Spindle torque: 208 Nm Turret: 2 x 12 stations Number of driven tool stations: 2 x 12 Driven tool speed: 5,000 rpm Torque (driven tools): 47 Nm Driven tool motor: 5.5 kW C-axis resolution: 0.001° Rapid traverse (X + Z axes): 20 / 40 m/min Rapid traverse (Y axis): 7.5 m/min Total power requirement: 68.4 kVA Machine weight approx.: 7.8 t Accessories: Collet chuck on main spindle, hydraulic 3-jaw chuck KITAGAWA, BB208, 210 mm dia., on sub-spindle, various tool holders for turret, short bar loader, HYDRAFEED type MULTIFEED MX-1B for bar diameter 3 – 80 mm and bar length up to 1650 mm; chip conveyor, coolant system with belt filter unit

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Walter MINI POWER Krautuvas Ncedpfxexnkzfs Af Ijl Fanuc

Sąlyga: naudotas, Gamybos metai: 2012, X eiga: 1 035 mm Y eiga: 560 mm Z eiga: 510 mm CNC valdiklis: HEIDENHAIN TNC620 Stalo dydis: 1 200 x 560 mm Maks. stalo apkrova: 1 000 kg Veleno tvirtinimas: SK 40 Veleno apsisukimai: 10 000 aps./min Veleno variklio galia: 13 kW Bepakopis padavimas: 20 000 mm/min Greita eiga: 25 m/min Įrankių keitiklis: 20 pozicijų Aušinimo sistema: vidinis aušinimas 20 bar Darbinė įtampa: 400 V Bendras galios poreikis: 17 kVA Staklių svoris: apie 4,1 t Užimama vieta: apie 2,55 x 2,30 x 2,25 m Drožlių transporterio matmenys: 3,90 x 0,95 x 1,60 m - Gamyklos Nr.: 1539000377A Ncedpsw A Spvefx Af Iel - Mašinos veikimo laikas: 21 689 h - Veleno veikimo laikas: 9 021 h - Valdymas: Heidenhain TNC 620 - Elektrinis rankenėlė - Drožlių transporteris - Vidaus aušinimas 20 bar

Sąlyga: naudotas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Spindle taper internal MK 4 Nedpfx Aou Uu S Tef Ijcl Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 Feed range 0.008 – 0.4 mm/stroke Space requirements approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping on table Change gears

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, bendras ilgis: 620 mm, Mechanics: All wear parts of the machine are replaced, including the feed spindle on the X-axis. All assemblies are restored to a like-new condition. After the overhaul, the machine is comparable to a new unit. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of each table and assembly is restored, both the X and Z-axis guideways are hand-scraped and restored to like-new condition. Upon completion, the machine receives a measurement protocol according to the manufacturer's specifications. Painting: After the machine's geometry is restored, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also fully overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Ncedpsurw Uysfx Af Ijl Machine Specifications: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine Weight and Dimensions: 2,500 kg // 2340 x 1445 x 1900 mm Machine Equipment (Standard): 1x Workpiece headstock MK5 1x Operator panel 1x Mount for internal grinding spindle 1x Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1x Hydraulic unit Optional: - 2-axis digital readout system - Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds possible upon clarification of technical details) - Separate low speed for part alignment