Krąžtų dantų honavimo staklės pirkti naudotą (5)

Būklė: naudotas, Gamybos metai: 1983, Workpiece diameter: 250 mm Centre distance: 0 mm Max. honing length: mm Max. module: 5 FÄSSLER (Switzerland) Conventional gear honing machine Model D-250, Year of manufacture: 1983, Serial No. 31 205.049.22 _____ Gear diameter: 10 - 250 mm Module: 1 - 5 Gear length / table stroke max.: 500 mm Centre height of tailstocks: 220 mm Max. workpiece weight: 50/100 kg Swiveling range of the honing head: +/- 35° Honing tool speeds: 20 - 500 rpm Honing tool size / width: 300 / 40 mm Workpiece speeds: 500 - 3,000 rpm Total cross slide travel: 270 mm Rapid cross slide traverse: 50 mm Mechanical infeed of cross slide: 1 - 8 mm/Ø Laedpfxjt Hwzpj Akhec Roughing / finishing infeed: 1-29 / 0.2-2.8 μm/sec. Hydraulic table speed: 0 - 6 m/min Total drive power: 5.5 kW - 380 V - 50 Hz Weight: 3,200 kg Accessories / special equipment: - Pre-settable machining parameters via counters and control devices for automatic operation, with workpiece counter - All roughing and finishing infeeds are set via decade switches; table reversing times and rapid feed times can be adjusted via potentiometer (1 s = 0.04 mm) - Ampere meter, etc. - Possibility for crowning and taper honing via templates, possible off-centre as well (workpiece must be pre-machined accordingly) - Separate honing oil unit with magnetic separator and fine filter - Mechanical tailstocks for manual loading, oil mist separator - Sliding doors with foot switch, separate hydraulic system

Būklė: naudotas, Gamybos metai: 1996, Workpiece diameter: 240 mm Centre distance: 0 mm Maximum honing length: 500 mm Maximum module: 5 Total power requirement: 12 kW Machine weight approx.: 5,000 kg Required floor space approx.: [missing] R E I S H A U E R (Switzerland) CNC-Controlled Gear Honing Machine Model: RZR, Year: 1996 # 74 105 _____ Wheel diameter min./max.: 10 - 240 mm Module: 0.5 - 5 Helix angle: +/- 30° Workpiece slide stroke (Z-axis): 275 mm Honing tool traverse stroke (X-axis): 128 mm X-axis infeed: 0.001 mm/stroke Crowning approx.: 0.5° Workpiece clamping length approx.: 500 mm Max. workpiece oscillation approx.: 3,000 mm Honing tool external/internal diameter x width: 325/308 x 45 mm Honing tool rotational speed: 100 - 1,200 rpm Honing tool dressing speed: 30 - 1,000 rpm Spindle drive: 4 kW Lsdpfet Hwvmex Akheac Total drive approx.: 12 kW - 400 V - 50 Hz Total weight approx.: 5,000 kg Accessories / Special equipment: - SIEMENS CNC path control type 810 G allows input of all relevant gear data and dialog-based workpiece setup with the controller. With DNC interface RS 232 for data input and output. - A-axis = swiveling/helix adjustment, Z-axis = table movement, X-axis = honing tool infeed, S-axis = honing wheel speed, U-axis = crowning adjustment. - Equipped with attached automatic device for threading the honing wheel into the tooth gap. - The tool swivel angle (A-axis) is also electrically positioned, fast and precise, and hydraulically clamped, resulting in reduced set-up times. - Hydraulic workpiece clamping via footswitch between the workpiece spindle headstock and tailstock, both units movable on the workpiece table depending on the workpiece. - Complete working area enclosure with sliding doors and safety interlock. - Extensive original REISHAUER honing oil processing system type RTO 40.10, with centrifuge and cooling unit for constant honing oil temperature, oil mist filter, etc. - Various diamond dressing tools mounted on arbors. - Separate ventilated and cooled electrical/control cabinet, separate hydraulic unit.

Būklė: naudotas, Gamybos metai: 2004, Rūšinys diametras 125 mm Modulis 4 Valdymas SIEMENS SINUMERIK Eigos kryptis - x 105 mm Eigos kryptis - y 40 mm Eigos kryptis - z 500 mm Rūšinys diametras 17 - 39,5 mm Rūšinys aukštis 6 - 15 mm Krumpliaračių honavimo staklės | GLEASON-HURTH - ZH 125 Laedpfx Ajx Szm Askhec Staklės yra labai gerai prižiūrėtos būklės. Atkreipkite dėmesį, kad techninės detalės buvo pridėtos pagal panašias stakles.

Būklė: naudotas, Gamybos metai: 2005, Technical Details: Workpiece diameter: 63.5 mm Centre distance: 350 mm Max. honing length: mm Total power requirement: kW Machine weight approx.: 6 t Required floor space approx.: 2.70 x 2.30 x 2.60 m Technical Data G0504 Working Area Clamping surface length mm 1550 Number of T-slots mm 2 Width of T-slots mm 18 Distance between T-slots mm 180 Centre height (tailstocks) mm 350 Swivel range of fine gear head (U axis) deg +30/-30 Axis distance - Tailstock/fine gear min./max. mm 120/225 Input increment (all NC axes) mm/deg 0.001 Slide Travel range (= Z-axis travel) mm 105 Input increment mm Tool External diameter min./max. mm 225/275 Bore diameter mm 160 Width mm 60 Workpiece External diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Gear width max. mm 45 Weight Machine weight approx. kg 5500 Operating Media Requirement Coolant recommendation, see Chapter 8 Hydraulic fluid HLP D 46 approx. liters 100 Speeds and Feeds Tool speed (infinitely variable) max. rpm 2000 Feed rates Laedpfxowrh H Ne Akhoc Rapid traverse/feed Z direction up to m/min 2 X direction up to m/min 2 U direction up to m/min 2 V direction up to m/min 2 C3 direction max. deg/sec 12 Electrical Equipment Operating voltage V 400 Control voltage/Lighting voltage V DC/AC 24/230 Frequency Hz 50 Power requirement approx. kVA 27 If the electrical installation is to be executed according to the customer’s specification, only the information in the electrical documentation is valid. Motor Data Servo drives: Nm / rpm Tool drive C1 27.0 3000 Workpiece drive C2 27.0 3000 X-axis 20.0 3000 Z-axis 20.0 3000 U-axis 6.0 3000 Portal vertical (V1-axis) 6.0 3000 Portal horizontal (U1-axis) Gripper rotation axis C3 5.0 3000 Loading slide (X1-axis) 5.0 3000 Three-phase motors: kW / rpm Hydraulic motor 1.5 1410 Central lubrication 0.07 2700 Coolant pump 4 2840 Hydraulic Equipment Delivery rate L/min 21 System pressure bar 50 Clamping pressure for: Headstock max. bar 35 Clamping tailstock min./max. bar 20 Available only when required. Not all maximum values can necessarily be achieved simultaneously. If several maximum values are reached simultaneously during a machining operation, performance limitations must be expected! Modifications to the specified designs, dimensions, and weights reserved.

Būklė: geras (naudotas), Gamybos metai: 2001, Ausgestattet mit: Power Stock Fanuc 5-Achsen CNC-Steuerung 160M 400 mm Honrad X-Achs-Impulsgeber Kühlsystem mit Doppelfiltern Magnetischer Späneabscheider Honenwerkzeug (Einstellung für den letzten Auftrag ist noch in der Maschine) Innen-Durchmesser des Honwerkzeugs in der Maschine: 14" Arbeitsleuchte Elektrische Tür Automatische Abrichtung Laedporualpefx Akhoc 5-Teile-Programm Bedienungsanleitung für die 16M-Steuerung Bedienungsanleitung für Einrichtung und Betrieb Technische Daten: Maximaler Außendurchmesser: 250 (350) mm Minimaler Außendurchmesser: 30 mm Maximale Gesamtlänge: 400 mm Maximale Zahnbreite: 45 mm Modul: 1,0 – 3,0 Querzustell-Einrichtung (Z-Achse): Max. Verfahrweg 430 mm Honrad-Vorschubeinrichtung (X-Achse): Max. Verfahrweg 370 mm Honrad-Schwenkeinrichtung (C-Achse): Schwenkwinkel: ±30 Grad Honrad-Drehspindelantrieb (A-Achse): Spindeldrehzahl Honrad: 500 U/min Außendurchmesser Honrad: 300 (400) mm Maximale Honradbreite: 50 mm Bombierungseinrichtung (Y-Achse): Maximaler Schwenkwinkel: 1,6 Grad Motortypen: Z-Achsen-Antriebsmotor: 1,8 kW X-Achsen-Antriebsmotor: 1,8 kW Y-Achsen-Antriebsmotor: 0,7 kW C-Achsen-Antriebsmotor: 1,8 kW A-Achsen-Antriebsmotor: 2,2/3,7 kW Maximaler Spitzenabstand: 600 mm Spitzenhöhe: 1.100 mm Aufstellfläche: 2.170 (B) x 2.800 (T) x 2.100 (H) mm Maschinengewicht: 4.500 kg