Krūminės apdirbimo staklės pirkti naudotą (302)

Būklė: naudotas, Techninės detalės: Dodpfjv U Un Hex Ahrouw z eiga: 1250 mm Apsisukimo skersmuo virš staklių lovos: 260 mm Ruoinio skersmuo virš lovos: 500 mm Ruoinio skersmuo virš atramos: 250 mm Centų aukštis virš lovos: 260 mm Frezavimo ilgis: 2000 mm Didžiausias modulis: 8 / 12 Bendras galios poreikis: 9,5 kW Apytikslis staklių svoris: 3,8 t

Būklė: geras (naudotas), Aprašymas: Staklės yra geros techninės būklės, iš anksto susitarus galima išbandyti. Naudojimas: krumpliaračių (tiesių, nuožulnių, veleninių) gamyba. TALPA: maksimali krumpliaračio skersmuo: ≈ 400 mm maksimalus modulis: dažniausiai 6–8 (naujų versijų iki 10) Dujdey Amiqspfx Ahrew maksimali krumpliaračio plotis: apie 275–400 mm VĖRŽLĖ IR ĮRANKIS pjovimo greitis: iki ~500 aps./min įrankio skersmuo: apie 160–240 mm variklio galia: apie 15–17 kW STALAS stalo skersmuo: ≈ 380–400 mm skylė stale: apie 80 mm apkrova: iki ~1000 kg MATMENYS IR SVORIS ilgis: ~4680 mm plotis: ~2395 mm aukštis: ~2515 mm svoris: apie 5–6,5 t (klasikinė versija)

Būklė: naudotas, Gamybos metai: 2006, Ruosių skersmuo: 5–1 000 mm Modulio diapazonas: 0,2–25 Nuolydžio kampas: < 90 ° Valdymas: Wenzel GearTec Plokštės, skirtos ruošiniui, skersmuo: 750 mm x ašis: 1 200 mm y ašis: 550 mm z ašis: 1 000 mm Bendra būtina galia: 6,5 kW Staklių svoris apie 11 t Užimamas plotas apie 3,30 x 3,15 x 2,70 m Valdo šias programas: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, Dusdpezkvvyefx Ahrow TStat, TStylus, WMI, wingeco.

Būklė: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, CNC dantų voluojamoji frezavimo staklė / CNC dantų voluojamoji staklė Valdymas: Siemens 840 D Power Line Techniniai duomenys: Maks. apdirbamo ruošinio skersmuo: 150 mm Stalo skersmuo: 145 mm Maks. stalo sukimosi greitis: 800 aps./min. Ašių atstumas / tarp centrų atstumas: 10–200 mm Maks. ašinis poslinkis: 250 mm Frezavimo galvutės pasvirimo kampas: +/- 45° Maks. priekinio atramo poslinkis: 300 mm Maks. greitasis poslinkis: 17 000 mm/min. Frezavimo galvutės variklio galia: 19 kW Maks. modulis: 3 mm Maks. frezavimo veleno / įrankio sukimosi greitis: 4 500 aps./min. Maks. voluojamosios frezos skersmuo: 80 mm Dodpfx Ajzkwvnjhreuw Maks. voluojamosios frezos ilgis: 200 mm Matmenys (apytiksliai): 5,5 x 3,7 x 3,1 m Svoris (apytiksliai): 9 500 kg Įranga: Drožlių transportavimo įrenginys Alyvos purškiamo rūko nusiurbimo / alyvos nusiurbimo sistema Alyvos aušintuvas Paremjantis įtaisas su nuleidimo mechanizmu ir vertikaliu reguliavimu Rotacinis įtaisų pakrovėjas su dviem ruošinių laikikliais Įkrovimo konvejerio sistema automatiniam tiekiamajam procesui 5 frezavimo įtvarai / voluojamosios frezos laikikliai: 1 x Ø 22 mm 2 x Ø 27 mm 1 x Ø 32 mm 1 x Ø 40 mm Kita: vaizdo įrašai per „WhatsApp“

Gamybos metai: 1991, būklė: naudotas, Wheel diameter - max. 400 mm Number of teeth - max. 150 Module - max. 5 Total power requirement: 16 kW Machine weight approx. 10 t P R Ä W E M A CNC Gear Edge Milling Machine in continuous hobbing process for chamfering external and internal gears on sliding sleeves, synchronizer rings, clutch bodies, starter pinions, spur gears, etc. Type SynchroForm W 2 - 1 Year of manufacture: 1991 Machine No. 05610 Workpiece diameter min./max.: 30 - 400 mm Number of teeth: 6 - 150 Module max.: 5 Tool holder/shank-Ø: SK 30 / 20 mm Dodpfx Ast Hwylehrouw Tool speed/spindle performance max. continuous: 4,000 rpm or 1.8 kW Transverse and longitudinal feed rates: 0.001-12 m/min Workpiece speed max. (1.5 kW) - C axis: 2,000 rpm Total drive approx.: 16 kW - 380 V - 50 Hz Weight approx.: 10,000 kg Equipment / Special features - BWO (HECKLER & KOCH) CNC control type 785 H for a total of 7 axes with screen input and all necessary monitoring and fault diagnosis systems for fully automatic operation. - 2 milling spindle units, left and right, adjustable to all required angular positions, CNC-controlled: Z and W axes = tool cross slide / X and U axes = tool longitudinal slide, L and O axes = milling spindle, C axis = workpiece spindle rotation. Manually controlled: tool slide rotary table (B and E axis), tool slide vertical adjustment (V and Y axis), tool head tilt (A and D axis), each with ROD for digital display in the control. - Hydraulic workpiece clamping device in combination with an automatic loading system via workpiece feed/conveyor belt and swing loader, as well as air system monitoring for the workpiece. - Coolant system with chip conveyor, soundproof enclosure, central lubrication, integrated hydraulic unit, pneumatically actuated safety doors, deburring equipment, etc. The machine operates on the hobbing principle with electronically synchronized tool and workpiece axes for machining straight roof profiles, both symmetrical and asymmetrical. Characterized by high productivity and precision. Condition: good to very good – shortly ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further machines for the processing of transmission components are always available from stock. Please enquire about your requirements.

Būklė: naudotas, Gamybos metai: 1980, Raddurchmesser - max. 2500 mm Radbreite 0 mm Modul - max. 34 Modul - min. 1 Gesamtleistungsbedarf ca. 15 kW Maschinengewicht ca. 15 t Raumbedarf ca. 4,20 x 2,00 x 2,90 m K L I N G E L N B E R G (Deutschland) Universale Verzahnungs- und Schraubungsmessmaschine Modell PFSU 2500 Baujahr ca. 1980 Serien-Nr. B 2918 _____ min/max Zahnrad-Ø 250 – 2.500 mm Modulbereich 1 – 34 Größter Grundkreis-Ø 2.400 mm Messbare Zahnflankenlänge 500 mm Hub des Messschlittens, ca. 600 mm Schrägungswinkel 0 – 45 ° Werkstücklänge zwischen Spitzen min./max. 430 – 2.500 mm Werkstück-Ø in Gegenauflage 1.340 mm Werkstücktisch-Ø 690 mm Diagrammvergrößerung 50/100/200/500/1000/2000 : 1 Max. zulässiges Prüfgewicht Zahnrad, ca. 10.000 kg Gesamtelektrische Anschlussleistung, ca. 15 kW – 380 V – 50 Hz Maschinengewicht, ca. 15.000 kg Dujdpot Hw Aaefx Ahrsw Die Maschine ist geeignet zur Vermessung des Zahnprofils und der Zahnflankenspuren an schweren gerade- und schrägverzahnten Stirnrädern. Zubehör / Sondermerkmale: * Digitale Einstellung des Grundkreises und digitaler Winkel ohne Grundkreisscheiben. * Längenverstellbare Halterung für Teilungsprüfer, jedoch keine Prüfeinheit vorhanden. * Schwere Werkstücke können gemessen werden. Motorischer Einricht-, Ausricht- und Prüfprozess per Knopfdruck. * Gegenlager kann zum Beladen schwerer Zahnräder und Kettenräder nach hinten geschwenkt werden, weiteres Zubehör vorhanden. Zustand: Diese Messmaschine muss überholt und mit einer neuen CNC-Steuerung nachgerüstet werden. Die Grundmaschine ist jedoch in einem ordentlichen Zustand und daher lohnt sich die Überholung sicherlich. Maschine kann nicht unter Strom besichtigt werden. Teile des Bedienpanels sind nicht vorhanden.

Būklė: naudotas, Gamybos metai: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universal - CNC gesteuerte Zahnstangenfräsmaschine Type UZFM - V 300 H - CNC Baujahr 1990 # 90-244x _____ max. Verzahnungslänge 2.100 mm Fräsweg/Fräsbreite quer max. 300 mm Modulbereich St/GG max. 16/18 Tisch-Aufspannfläche 510 x 2.400 bzw. 275 x 2.120 mm Einbauhöhe unter Fräs-Spindel-Achse min./max. 150 / 430 mm Fräser-Ø min. / max. Ø 125 + 2 x Schnitttiefe / 280 mm Fräserbreite max. fliegend / mit Gegenlager 50 / 140 mm Fräserdorn-Ø max. 22 - 50 mm Frässpindelkopf schwenkbar rechts / links (Hinterfräsungen) 30 / 45 ° Frässchlitten schwenkbar rechts / links (Schrägverzahnung) 30 ° 9 Spindeldrehzahlen 40 - 120 U/min. Vorschübe stufenlos (Frässchlitten) / Eilgang 0 - 1.300 / 2.000 mm/Min. Tisch-Eilgang 10.000 mm/Min. Frässpindelantrieb 5,5 kW Gesamtantrieb 10 kW - 400 V - 50 Hz Gewicht 5.000 kg Dedpfxet Hwwqs Ahrjuw Zubehör / Sonderausstattung: o SIEMENS - CNC - Steuerung Model M 810 für die Teilachse ( X ), sodaß eine schnelle Umstellung der Maschine möglich ist ohne Wechselräder. Teilschritte 0,001 - 2100 mm, auch unterschiedliche Teilungsdistanzen programmierbar, " Einstellung aller Vorschub- und Eilgangwege über die Hydraulik, Vorschub einstellbar für 2 Schnitte, Wegbegrenzung der Achsen über voreinstellbare Endschalter o Aufgebaute hydraulische Werkstückspanneinrichtung ca. 2.000 x 160 mm lang o verstärkter Fräskopf mit stufenlos regelbare Fräserdrehzahl o separat stehender Schaltschrank und Hydraulikanlage , im Tisch eingebauter Späneföderer und separat stehender Späneförderer mit Kühlmitteleinrichtung, Zentralschmierung, etc. Die Maschine könnte auch mit einer aktuellen SIEMENS-Steuerung nachgerüstet werden! Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and error in technical data: D O N A U - K N A P P (Germany) Universal - CNC-Controlled Rack Milling Machine Model UZFM - V 300 H - CNC Year 1990 Serial No. 90-244x _____ Max. Cutting length 2.100 mm Milling travel / milling width cross max. 300 mm Module in steel / cast iron, max. 16 / 18 Table clamping size 510 x 2.400 resp. 275 x 2.120 mm Mounting height under cutter, depending on cutter Ø 150 - 430 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 280 mm Cutter width max. without/with counter bearing support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling ( for relief cuts ) right / left 30 / 45 ° Milling spindle speeds steplessly adjustable 40 - 120 rpm Milling slide swivelling right / left for Helix Cuts 30 ° Feeds, infinitely variable (milling slide) 0 - 1.300 / 2.000 mm/min Quick return of WP-table 10.000 mm/min Milling spindle drive 5,5 kW Total electrical load 10 kW - 400 V - 50 Hz Weight 5.000 kg Accessories / Special Features: * SIEMENS-CNC-Control for the Indexing axis ( X ) so th...

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts Duedpfx Aet Hww Djhrsw • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1969, Wheel diameter - max. 265 mm Wheel width 45 mm Module - max. 4 Module - min. 0.3 Workpiece diameter - max. 300 mm Stroke length max. 0-50 mm Stroke position adjustment 25 mm Distance between work spindle and clamping surface max. 170/245 mm Internal spindle taper MK 4 Table size 180 mm Table bore 95/75 mm Number of strokes per minute 450 - 840 Dusdpst Hwrusfx Ahrjw Total power requirement 10 kW Machine weight approx. 5200 kg Space requirement approx. m max. gear wheel Ø (external) approx. 265 mm * max. workpiece Ø for internal gearing 300 mm max. gear width 45 mm Module range 0.3 - 4 Stroke length 0 - 50 mm Stroke position adjustment 25 mm Distance table to spindle min./max. 170/245 mm Spindle internal taper (external 90/50 internal) MK 4 Table size 180 mm Table bore 95 / 75 mm Table travel, transverse approx. 175 mm Steplessly adjustable strokes per minute 450 - 840 strokes/min Feed range 0.09 - 0.6 mm/stroke Circular feed 2722 - 681 strokes/cutting wheel revolution Total drive 10 kW - 380 V -50 Hz Weight 5,200 kg Accessories / Special Equipment * Rotary switch for various operating programs and manual control * Multiple-cutting device for roughing/finishing/burning out * Hydraulic external workpiece clamping device mounted on the table (internal toothing performed; type of collet) * Separate control cabinet and separate hydraulics * Hydrostatic linear guiding with separate oil cooler * Lateral table offset for optimal ram lift-off * Stepless stroke rate adjustment via GS motor * Built-in coolant system * Pre-settable impulse counter for precise table shut-off after each cut, with digital display * Various change gears

Būklė: naudotas, Gamybos metai: 1996, Workpiece diameter: 240 mm Centre distance: 0 mm Maximum honing length: 500 mm Maximum module: 5 Total power requirement: 12 kW Machine weight approx.: 5,000 kg Required floor space approx.: [missing] R E I S H A U E R (Switzerland) CNC-Controlled Gear Honing Machine Model: RZR, Year: 1996 # 74 105 _____ Wheel diameter min./max.: 10 - 240 mm Module: 0.5 - 5 Helix angle: +/- 30° Workpiece slide stroke (Z-axis): 275 mm Honing tool traverse stroke (X-axis): 128 mm X-axis infeed: 0.001 mm/stroke Crowning approx.: 0.5° Workpiece clamping length approx.: 500 mm Max. workpiece oscillation approx.: 3,000 mm Honing tool external/internal diameter x width: 325/308 x 45 mm Honing tool rotational speed: 100 - 1,200 rpm Honing tool dressing speed: 30 - 1,000 rpm Spindle drive: 4 kW Total drive approx.: 12 kW - 400 V - 50 Hz Total weight approx.: 5,000 kg Accessories / Special equipment: - SIEMENS CNC path control type 810 G allows input of all relevant gear data and dialog-based workpiece setup with the controller. With DNC interface RS 232 for data input and output. - A-axis = swiveling/helix adjustment, Z-axis = table movement, X-axis = honing tool infeed, S-axis = honing wheel speed, U-axis = crowning adjustment. - Equipped with attached automatic device for threading the honing wheel into the tooth gap. - The tool swivel angle (A-axis) is also electrically positioned, fast and precise, and hydraulically clamped, resulting in reduced set-up times. - Hydraulic workpiece clamping via footswitch between the workpiece spindle headstock and tailstock, both units movable on the workpiece table depending on the workpiece. - Complete working area enclosure with sliding doors and safety interlock. Dodet Hwvmspfx Ahrjuw - Extensive original REISHAUER honing oil processing system type RTO 40.10, with centrifuge and cooling unit for constant honing oil temperature, oil mist filter, etc. - Various diamond dressing tools mounted on arbors. - Separate ventilated and cooled electrical/control cabinet, separate hydraulic unit.

Būklė: naudotas, Gamybos metai: 1980, Wheel diameter – max. 2,500 mm Wheel width 1,200 mm Module – max. 32 Module – min. 3 Total power requirement 25 kW Dedpot Hwqqofx Ahrjuw Machine weight approx. 60 t Space requirement approx. __ m Year of manufacture: 1980 Overhauled: 1990 Wheel Ø min./max. 180 – 2,500 mm Module 3 – 32 Maximum helix angle 10 – 35° Wheel width for spur gearing 1,200 mm Stroke length approx. 100 – 1,200 mm Number of strokes 80 – 350 strokes/min Adjustable stroke position 300 mm Stroke speed 4–40 m/min Max. workpiece weight approx. 18,000 kg Max. number of teeth 16–576 Table size Ø x bore 1,400 x 500 mm Grinding wheel Ø approx. 500 mm Grinding wheel peripheral speed 34 m/s Total drive approx. 25 kW – 380 V – 50 Hz Weight approx. 15 t Accessories / Special features: • Hydrostatic guides on the grinding slide, table, and all other guideways • Complete grinding enclosure with sliding doors • Automatic grinding cycle in multiple passes as well as settings for roughing, finishing, fine finishing, and automatic dressing cycle after preset number of teeth • Profile correction possible by corresponding dressing and additional movement of the grinding slide (crown and flank correction in height and side) • Approx. 50 change gears, angle measuring device • Large coolant system with band filter and oil mist extraction • Separate control cabinet, separate hydraulic unit, separate oil cooling system

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Wheel diameter – max. 400 mm Machine weight approx. 4 t O F F E R We can offer you, subject to prior sale and errors, the following machine from stock, without obligation: KLINGELNBERG Single & Double Flank Gear Rolling Tester with Structure-Borne Noise Inspection Model R 30 Year of manufacture 2007 _____ Workpiece - External diameter min. / max. 36 / 300 mm Centre distance workpiece – counter gear 135 - 290 mm Max. spindle speed 3,000 rpm Max. drive torque up to 2196 rpm 20 Nm Max. drive torque 2196 – 3,000 rpm 14.7 Nm Spindle drive 4.62 kW Total drive approx. 10 kW – 400 V – 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment • The machine is a universal running tester designed for the following test procedures: o Single flank gear rolling inspection o Double flank gear rolling inspection Djdpfx Ajxvdryohreuw o Structure-borne noise inspection in single & double flank contact o Helix inspection in double flank contact • WINDOWS PC control for measurement data collection and analysis with NoisyS32 inspection software • SIEMENS control panel for operation of the machine as well as for evaluation of the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessory parts, operating manuals • Currently, the ‘license dongle’ to unlock the measuring software is missing. We hope to obtain this from the previous owner. Condition: Very good! Barely used! Soon: Please click here for a video of the machine: Delivery : ex stock, immediately available, FCA Metzingen Payment : strictly net – after receipt of invoice Always a large selection of gear manufacturing machines in stock – please inquire with your requirements!

Būklė: naudotas, Gamybos metai: 1987, Maximum rolling pressure: NA t Workpiece diameter: 38 mm Workpiece length: 500 mm Total power requirement: 24 kW Machine weight approx.: 10 t Space requirement approx.: m Max. stroke of tool slide, upper/lower: 760 mm Max. rack length approx.: 610 mm Workpiece length between centers approx.: 500 mm Max. gear width/profile width: 92 mm Max. workpiece Ø: 38 mm Tailstock stroke on the boom, hydraulic approx.: 500 mm Module range from/to: 0.3 to 1.3 module Dujdpjt Hw D Djfx Ahrew Total drive approx.: 24 kW - 380 V - 50 Hz Total weight approx.: 10,000 kg Accessories / Special equipment: - Workpiece feeder by KBH, parallel to the machine, currently set up for feeding and unloading shaft-shaped workpieces approx. 16 Ø x 200 mm long with prism conveyor belt and lifting station for 2 shafts (raw/finished part) in the clamping area, as well as with workpiece position control device. - Originally, the outer gears (Zz = 25), approx. 32 mm Ø x 14 mm long, workpiece Ø approx. 80 x 80 mm long, were rolled on so-called planetary carriers (automotive). - Various accessories, separate control cabinet, separate hydraulic unit 900 L, coolant system in the machine, control panel with plain-text error messages, etc. ROTO FLO machines are ideal for series production of smaller gears/profiles and are significantly more economical than gear hobbing. The workpieces are clamped between centers and profiled by synchronised, counter-rotating rack-type tools. The material is displaced and shaped by the increasing profile height in the rack tool. In the tool’s calibration zone, profile and surface quality are optimized. No run-out of the profile is necessary, as is required with milling or shaping. The machine is characterized by an extremely robust design. The tools can achieve service lives of 25,000 to 100,000 pieces, even for helical gearing. Condition : very good - assembled in our warehouse and ready for demonstration Delivery : from stock - as inspected Payment : net - upon receipt of invoice We look forward to your order. Further cold rolling machines and other gear machining equipment always available in our range.

Būklė: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm Dujdst Hw D Rspfx Ahrow Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2,400 kg Fully automatic hobbing machines for worm gear cutting Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. wheel diameter without parts magazine approx. 80 mm Max. wheel diameter with parts magazine approx. 50 mm Max. module 2 / 2.5 Axial cutting length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter – diameter 24 – 50/63 mm Max. radial travel of the milling slide 0–14/18 mm Max. milling cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed rate stepless 0.05 – 4.0 mm/rot. Radial feed rate stepless 0.2 – 200 mm/min. Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter, program numbering, and 30-position digital error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and then inserted into the loading unit. The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power. Machine is set up for cutting worm shafts/armature shafts used in variable transmissions for automotive seat adjusters, window regulators, etc.

Būklė: naudotas, Gamybos metai: 1977, Wheel diameter - max. 400 mm Wheel width 280 mm Module - max. 4 Module - min. 1 Total connected load 15 kW Machine weight approx. 6000 kg Space requirement approx. ... m LORENZ Universal Gear Hobbing Machine Type F 400 Year of manufacture 1977 S/N 8687 _____ Min./max. wheel diameter 400 mm Module range 1 - 4 Number of teeth approx. 8 – 210 Milling width approx. 280 mm Max. workpiece installation length approx. 450 mm Milling slide swiveling up to 60° Cutter size (diameter x length) 160 x 220 mm Cutter shifting max. 180 mm Cutter speeds 125-500 rpm Table diameter x bore 375 x 80 mm Feed range: axial 0.31 - 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Milling spindle drive approx. 8 kW Total drive power approx. max. 15 kW - 380 V - 50 Hz Weight approx. 6,000 kg Accessories / Special features • Multiple milling programs selectable for climb and conventional milling, as well as for radial/axial milling processes, possibly worm gear milling • Universal milling head with cutter shifting • Hydraulic workpiece clamping on table and hydraulic tailstock • Hydraulically folding counter-holder connection for easier loading • Differential for helical gearing • Infinitely variable speed control, display for speed and amperage • Change gears, various accessories, coolant system * Very robust construction Duodjt Hw Hxepfx Ahrew Condition: good – will be demonstrated shortly Delivery: ex stock – as inspected Payment: upon receipt of invoice, strictly net

Būklė: naudotas, Gamybos metai: 1995, Wheel diameter - max. 80 mm Wheel width 120 mm Module - max. 3 Module - min. 1 Control: SIEMENS 840 C Total power requirement: 30 kW Machine weight approx. 7,500 kg Footprint approx. [space missing] m LIEBHERR CNC-controlled gear hobbing machine Type: LC 82 Year of manufacture: 1995 # 0836 --- Wheel diameter max. 80 mm Module 1 – 3 Helix angle +/- 45° Distance table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shift range/tool traverse: 180 mm Min. number of teeth: 3 Cutter Ø x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feeds in axial/radial/tangential: 20/4/5 mm/rev Max. workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW - 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special equipment: • SIEMENS CNC control type 840 C for 6 axes (i.e. cutter drive/Table drive/Swivel angle of the milling head/axial feed/radial feed/tangential feed) with gear-specific user interface and diagnostic functions for rapid troubleshooting. • With device for automatic insertion of the hob into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading unit SSL = quick swivel loader using a mechanical step transmission and cam disk for fast loading times, with 3-way rotary gripper for blank gripping/working position/unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinions) • Workpiece feeding by means of plate chain conveyor (PKB) for workpieces with positive-fit carrier. Additional feed belt for raw and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete working area enclosure with sliding door and oil mist extraction, etc. The machine can also be used for dry gear cutting. Dusdst Hw R Dopfx Ahrew Condition: satisfactory to good – under power and ready for demonstration, compact design! Delivery: ex-stock – as inspected Payment: net cash – on receipt of invoice

Būklė: naudotas, Gamybos metai: 1997, Wheel diameter - max. 215 mm Wheel width 40.65 mm Module - max. Total power requirement 20 kW Machine weight approx. 10 t G L E A S O N (USA) CNC Grinding Machine for Spiral and Hypoid Bevel Gears Model PHOENIX HG 200 Year of construction 1997 Max. external diameter of workpiece: 215 mm Tooth profile size (height x width): 16 mm x 40.65 mm Number of teeth: 5 - 200 Maximum gear ratio: 1 : 10 Grinding wheel diameter: 51-190 mm Grinding wheel speed: 1,000 – 6,000 rpm X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (sliding base): 304 mm Distance machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0-30 rpm Workpiece spindle bore, tapered: 3 29/32 inches Total drive approx.: 20 kW - 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special equipment: • FANUC – 7-axis CNC control type 150 MB with monitor and direct data entry, automatic calculation of all workpiece and grinding parameters • Large, sophisticated coolant system with filtration, band filter, etc. • Powered grinding wheel dressing device with CNC-controlled compensation for wheel form and diameter after each dressing cycle • Gear grinding can be performed either as single part processing with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. Grinding wheels can be made of CBN or conventional “dressable” aluminium oxide, depending on cost. Grinding with a conical wheel provides advantages in terms of heat management and contact pattern quality. Therefore, these bevel gear sets (automotive industry) can be manufactured in high quality, with consistent accuracy, cost-efficiently, and with short setup times. Please refer to the brochure copy on our website for additional details. Condition : very good – can be demonstrated under power Delivery : ex stock - as inspected Payment : strictly net – upon receipt of invoice We look forward to your order. Further gear manufacturing machines always in stock. X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (sliding base): 304 mm Distance machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Duedpfxjt Hwxhj Ahrjw Workpiece spindle speeds: 0-30 rpm Workpiece spindle bore, tapered: 3 29/32 inches Total drive approx.: 20 kW - 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special equipment: - FANUC – 7-axis CNC control type 150 MB with monitor and direct data input, automatic calculation of all workpiece and grinding parameters - Large, sophisticated coolant system with filtration, band filter, etc. - Powered grinding wheel dressing unit with CNC dressing control for automatic form and diameter compensation after each dressing - Gear grinding can be performed either as single part processing with a conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made of CBN or conventional dressable aluminum oxide wheels (cost dependent). Grinding with a conical grinding wheel...

Būklė: naudotas, Gamybos metai: 1983, Workpiece diameter: 250 mm Centre distance: 0 mm Max. honing length: mm Max. module: 5 FÄSSLER (Switzerland) Conventional gear honing machine Model D-250, Year of manufacture: 1983, Serial No. 31 205.049.22 _____ Gear diameter: 10 - 250 mm Module: 1 - 5 Gear length / table stroke max.: 500 mm Centre height of tailstocks: 220 mm Max. workpiece weight: 50/100 kg Swiveling range of the honing head: +/- 35° Honing tool speeds: 20 - 500 rpm Honing tool size / width: 300 / 40 mm Workpiece speeds: 500 - 3,000 rpm Total cross slide travel: 270 mm Rapid cross slide traverse: 50 mm Mechanical infeed of cross slide: 1 - 8 mm/Ø Roughing / finishing infeed: 1-29 / 0.2-2.8 μm/sec. Hydraulic table speed: 0 - 6 m/min Total drive power: 5.5 kW - 380 V - 50 Hz Weight: 3,200 kg Accessories / special equipment: - Pre-settable machining parameters via counters and control devices for automatic operation, with workpiece counter Dsdpfx Aet Hwzpjhreuw - All roughing and finishing infeeds are set via decade switches; table reversing times and rapid feed times can be adjusted via potentiometer (1 s = 0.04 mm) - Ampere meter, etc. - Possibility for crowning and taper honing via templates, possible off-centre as well (workpiece must be pre-machined accordingly) - Separate honing oil unit with magnetic separator and fine filter - Mechanical tailstocks for manual loading, oil mist separator - Sliding doors with foot switch, separate hydraulic system

Būklė: naudotas, Gamybos metai: 1980, Maximum wheel diameter: 400 mm Wheel width: N/A mm Maximum module: 5 Minimum module: Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Duedpfx Aet Hw Ebehrow Manual double-flank rolling tester

Būklė: naudotas, Gamybos metai: 1973, Maximum wheel diameter: 400 mm Wheel width: 75 mm Total power requirement: 25 kW Machine weight: approx. 7,000 kg LORENZ High-performance gear shaping machine Model: LS 400 Year of manufacture: 1973 S/N: 11 884 _____ Max. external wheel diameter: 400 mm* (potentially larger) Max. internal gearing diameter: approx. 350 mm Max. wheel width: 75 mm Module range: 0.5 – 6 Stroke length: approx. 82 mm Adjustable stroke position: 0 – 80 mm Ram clearance (ram spindle / machine body): 250 mm Spindle taper: approx. MT5 Strokes (roughing/finishing): 118 – 1,000 rpm Table size: 400 mm Duedpfx Ahjt Hw Hlerjw Table bore: 125 mm Installation height between table and shaping head: min./max.: approx. 280/350 mm Fixed ram clearance: 250 mm Axial table travel: approx. 295 mm Approximate number of teeth: 12 – 150/300 Feed range Tooth depth: 0.01 – 0.063 mm/stroke Radial feed (for tool Ø 125): 0.125 – 3.150 mm/stroke Spindle/total drive: approx. 19 kW / 25 kW – 380 V, 50 Hz Weight: 7,000 kg Accessories / Special features: • Built-in intermediate plate 200 mm for shaping head elevation • Hydraulic workpiece clamping (RINGSPANN brand) integrated in table for flat workpieces • Automatic stroke and automatic feed changeover for roughing and finishing in up to 4 cuts • Separate control and electrical cabinet, separate hydraulic unit • Integrated coolant system with magnetic chip conveyor, two-hand operation • Approx. 40 change gears, 4 shaping tool holders, 2 pulleys for stroke drive, etc. Condition: Good, operational and can be demonstrated under power Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1980, Milling length: 1750 mm Milling width: 260 mm Module – max.: 10 Module – min.: 12 Total power requirement: 8 kW Machine weight approx.: 4500 kg Space requirement approx.: m D O N A U - K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Year of manufacture: 1980 # 80-234x ----- Max. gear cutting length: 1,750 mm Milling travel / max. cross milling width: 260 mm Helical gearing up to: 30° Module range steel/grey cast iron max.: 10 to 12 Effective clamping surface (table): 275 x 1,830 mm Mounting height under milling spindle axis min./max.: 150 / 430 mm Milling cutter diameter min. / max.: 108 + 2 x cutting depth / max. 165 mm Max. milling cutter width unsupported / with counter support: 50 / 140 mm Milling arbor diameter max.: 22 - 50 mm 9 spindle speeds: 29 – 178 rpm Milling slide swivels right/left: 30° Milling spindle head swivels right/left: 30 / 45° Infinitely variable feed (milling slide): 0 – 600 mm/min Rapid return: 2,000 mm/min Milling spindle drive approx.: 4 kW Total drive: 8 kW - 400 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment: • Automatic milling sequence control via cam track on milling head slide and table slide, with skip function (automatic bypass of non-machining areas) and pendulum milling operation (synchronous milling on one half of the table with workpiece changeover on the second half) • Hydraulic workpiece clamping system, continuous approx. 260 x 1800 mm, max. clamping width 140 mm, clamping height approx. 60 mm, with dedicated hydraulic unit and electrical release • Manual fine adjustment of the table (0.001 mm), e.g., for precise positioning into a pre-milled gearing • Various change gears (approx. 10 pcs), 2 arbor mandrels, central lubrication with impulse, built-in hydraulic system, separate coolant device, separate control cabinet, various used rack milling cutters Price, ex stock plus VAT: € 49,500.-- This machine is particularly suitable for milling racks as well as for the production of broaching tools (undercutting by swiveling the milling head). Duodst Hxagjpfx Ahrsw Condition: very good – ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1977, Grinding diameter - max. 400 mm Grinding width 0 mm Module - max. Module - min. Total power requirement 3 kW Machine weight approx. 4.2 t Space requirement approx. m Dressing wheel - Ø min./max. 64 - 320 mm Grindable module size 1 - 12 Modul Max. dressing wheel width 40 mm Number of teeth 13 - 240 Roller diameter 73 - 320 mm Workpiece slide speed 5 - 20 - 30 - 40 teeth/minute Grinding wheel speed 690 rpm Grinding wheel diameter 762 mm Grinding wheel swivel (contact angle) 5-21° Grinding slide swivel (helix angle) 2x 35° Dsdpjt Hwnvjfx Ahrjuw Grinding slide vertical adjustment 240 mm Dresser speed 1/0.5/0.25 m/minute Grinding spindle drive / total drive 1.1 / 3 kW - 380 V - 50 Hz Weight approx. 4,200 kg Accessories / Special equipment: The machine is suitable for grinding external and internal rack wheels as well as for grinding master gears or cutter wheels for gear shaping machines. Unfortunately, no further accessories are available for the machine, so it is an investment as a secondary machine if suitable accessories are already available.

Būklė: naudotas, Gamybos metai: 1975, Wheel diameter – max. 160 – 1,600 mm Wheel width 250 mm Module – max. 20 Module – min. 1.5 Total power requirement 1 kW Djdpst Hwptofx Ahrjuw Machine weight approx. 3 t Required space approx. m K L I N G E L N B E R G Universal Gear Testing Machine for Involute and Lead Inspection Type: PFSU 1600 Year of manufacture: 1975, modernized in 1995 # B 2281 Working range: Min./max. gear diameter: 160 – 1,600 mm Module range: 1.5 – 20 mm Max. gear width: 250 mm Probe carriage stroke approx.: 300 mm Max. helix angle: 0 – 90° Max. workpiece length between centers: approx. 1,150 mm Tailstock offset: 450 mm Chart recorder magnification: 50/250/500/1000 x Max. test gear weight approx.: 4,000 kg Weight approx.: 3,000 kg Total drive: approx. 1 kW – 380 V – 50 Hz Suitable for testing: – Gear profile (involute) – Tooth direction (helix angle/lead) on internal and external gears, hobs, gear shaper cutters, and worms, etc. – Gear runout, surface roughness – Determination/reconstruction of the base circle and helix angle, etc. Accessories / Special features: – Optical base circle and angular setting, no base circle discs required anymore – High workpiece weight achievable by design; motorized and manual operation via handwheels – Rotating index table, Ø 480 mm, for setting up larger gear bodies with 2 sets of different extension supports (400 mm and 470 mm long) for gear diameters up to max 1,600 mm – Counter-support AV 17 for max. workpiece length between centers of 1,150 mm – Separate electrical cabinet for controlling manual movements – Includes GFM Computer Type ZMP 20 e with software for automatic gear measurement, updated in English and optionally in German; program update to the current version V 21.17 available; ideal for creating modern inspection reports with graphics, also visually displayed on monitor; other subprograms, HP printer, flat-screen monitor – Various probe inserts, small parts, as well as height-adjustable mount for a pitch inspection device (device not included, but mounting available and rear-mounted), leveling feet, etc. Condition: Very good – ready for demonstration; professionally dismantled and assembled.

Būklė: naudotas, Gamybos metai: 1980, Wheel diameter - max. 1010 mm Wheel width 0 mm Module - max. Module - min. Total power requirement 15 kW Machine weight approx. 9.5 t Space requirement approx. m G L E A S O N (USA) "CURVIC-Coupling" - Automatic Coupling Grinding Machine Type 120 (888), Year of manufacture 1980 Serial no. 763402 Max. tooth height 10 mm Max. swing diameter of workpiece 1,010 mm Max. outside diameter of CURVIC teeth 610 mm Retraction of workpiece slide plate 216 mm Max. distance grinding wheel to workpiece nose 90-430 mm Max. workpiece weight incl. clamping device approx. 500 kg Number of teeth range 32 - 150 Grinding wheel diameter approx. 152 - 320 mm Grinding wheel speed, stepless 0 - 3,600 RPM Workpiece spindle bore 60 mm Duodpfx Aet Hwnishrow Total drive power approx. 15 kW - 380 V - 50 Hz Weight approx. 9,500 kg Accessories / Special equipment: Automatic rough grinding and finish grinding by means of presettable counters and integrated feed curves Counter for number of teeth Counter for number of dressing cycles 2 mounted dressers with 3 dressing diamonds for external dressing, internal dressing, and dressing wheel tip Mounted index plate for 48 teeth Separate coolant unit with band filter, separate hydraulic system Freestanding oil mist extraction unit by TRION, various small parts

Gamybos metai: 1975, būklė: naudotas, Wheel diameter - max. 280 mm Number of teeth - max. 100 Module - max. 6 Module - min. 1 Total power requirement 6 kW Machine weight approx. 2500 kg Space requirement approx. (dimensions missing) HURTH Automatic gear edge milling machine for universal use, for deburring and chamfering gear wheels Type ZK 7 - Year of manufacture 1975 - Serial no. 26,000 _____ Max. workpiece diameter approx. 280 mm Workpiece length approx. 200 mm Module range for deburring 1-6 module for ease of switching 1-4 module Workpiece number of teeth 6 - 100 Workpiece spindle bore 102 mm Workpiece head horizontal adjustment approx. 340 mm Vertical adjustment of the milling slide 180 mm Swiveling of the milling slide 105° Cross adjustment of the milling slide approx. 300 mm Cutter speeds 250–2,800 rpm Cutter strokes 30–210 min⁻¹ Djdpst Hw Dkjfx Ahrouw Adjustable cutter stroke 6–12 mm Cutter spindle mount 40 SK Total drive approx. 6 kW - 380 V - 50 Hz * Weight approx. 2,500 kg Accessories / Special equipment: • Electric workpiece clamping device with collet chuck system, device for expanding mandrels, and standard workpiece mounting; numerous clamping tools available. Foot switch for clamp release. • Mechanical indexing device for the number of teeth with approx. 20 different indexing plates, • The workpiece head is equipped with an adjustable gear gap centering device • The tool head features a mechanical collet holder for various cutter diameters and types (form, face, or bell cutters, etc.) Approx. 50 various new and used cutters included. • Hydraulic working stroke of the tool spindle towards the workpiece with built-on hydraulic unit. • Workpiece counter. Condition: Good – demonstration ready; very interesting due to extensive accessories. Delivery: ex stock – as inspected * Payment: strictly net – upon receipt of invoice We look forward to your order. Around 100 different gear cutting machines are also available from stock. Please inquire if interested.