Dantų šonų šlifavimo staklės

KAPP VAS 531 CNC

Būklė: geras (naudotas), Gamybos metai: 2008, Krumpliaračiai Reishauer RZ303 Hsdpfx Asxz E S Eodmjnk

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 12 000 kg, padavimo eiga Y ašimi: 300 mm, padavimo ilgis Z ašis: 1 080 mm, stalo skersmuo: 1 200 mm, X ašies padavimo greitis: 3 m/min, Y ašies padavimo greitis: 500 m/min, padavimo greitis Z ašis: 3 m/min, įėjimo srovė: 195 A, ruošinio skersmuo (maks.): 1 600 mm, frezos veleno ilgis: 450 mm, stalinis gręžtuvas: 400 mm, veleno greitis (min.): 250 aps./min, bendras svoris: 51 000 kg, galia: 115 kW (156,36 AG), Įranga: dokumentacija / vadovas, Liebherr high-performance gear hobbing machine LC1502 in good condition Control system: Liebherr LH90 V4, drives by Bosch Rexroth Extensive accessories such as BHG, cooling unit for lubricant and coolant, extraction system, arbor shafts, various software packages/parameter extensions and complete documentation. We can also assist with installation and commissioning through to production, according to effort! Hjdpjwqm A Tofx Admenk

Būklė: naudotas, Gamybos metai: 1999, X travel: 12,000 mm Y travel: 3,600 mm Z travel: 1,500 mm Spindle speeds: 3,000 rpm Control system: Heidenhain iTNC430 Milling head: 2 axes, indexed in 2.5° increments Vertical (Y axis): 3,600 mm Cross (Z axis): 1,500 mm Longitudinal (X axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7:231:3,000 rpm Hodpfx Adsxwdygemjnk Feed range: 2–2,500 mm/min Rapid traverse X axis: 12,000 mm/min Z/Y axis: 15,000 mm/min Feed motor torque X axis: 55 Nm Z axis: 37 Nm Y axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: Clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Gamybos metai: 1971, būklė: naudotas, Technical Details: Wheel diameter – max.: 300 mm Module – max.: 5 Module – min.: 0.5 Max. workpiece weight: 60 kg Approx. machine weight: 4.0 t Machine dimensions: 1800 x 1850 x 2500 mm Switch cabinet dimensions: No. 1: 1930 x 400 x 1920 mm Switch cabinet dimensions: No. 2: 800 x 230 x 1950 mm Exhaust unit dimensions: 1400 x 700 x 560 mm Cooling unit dimensions (LxWxH): 1.2 x 1.0 x 0.45 m Electronically controlled gear flank grinding machine For modules up to 5 and diameters from 240–300 mm Hjdsvc Apbjpfx Admenk Feed rate per workpiece revolution stepless: 0.4 – 3.2 mm Max./min. number of teeth: 130 / 12 Max./min. pressure angle: 30° / 14°30` Max./min. helix lead at 24 teeth: 6000 / 200 mm Max. helix angle, both sides: 45° Grinding worm speed: 1900 rpm Without dressing device Equipment: Approx. 77 various change gears, extension tubes, and miscellaneous accessories Two of these machines are available for sale. Both machines are operated via two shared control cabinets and a common exhaust system.

Būklė: naudotas, Gamybos metai: 2017, X eiga: 5850 mm Hnjdpfxjycln De Admjk Y eiga: 2500 mm Z eiga: 1000 mm Valdymas: 840D sl Pavaros x + y ašys: 20 m/min Pavaros z ašis: 20 m/min Pagreitis: 5 m/s² Pagrindinis veleno variklis: 60 kW Veleno apsukos (be pakopų): 24 000 aps./min. Darbinio veleno sukimo momentas: 87 Nm Įrankio laikiklis: HSK-A63/F80 C ašis: +/- 360 laipsnių A ašis: +/- 100 laipsnių Įrankių keitiklis: 20 vnt. Aušinimo skysčio talpa: 2300 l Tvirtinimo paviršius: 6000x2500 mm T griovelių kiekis: 18 Griovelių atstumas: 125 mm Užimama erdvė: apie 14,8x7,3x5,8 m Stumoklio skerspjūvis: 560x420 mm Išorinis aušinimas: 40 l/min esant 6 bar Vidinis aušinimas: 30 l/min esant 40 bar Rušinio matavimas Vaizdo stebėjimas

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing Hnodpfx Adet Hww Demok • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 29 081 h, Funkcionalumas: visiškai funkcionalus, FPT Industrie S.p.A. – Traveling Column / Portal Milling Machine Model: DINOSPIN Year of Manufacture: 2019 Serial Number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Hodpfx Adjyrndmjmenk Machine Weight: 44,280 kg Control System: Heidenhain TNC640 (15") RAM: 4 GB Hard Drive: 32 GB (min. 21 GB program memory) Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block Processing Time: 0.5 ms Handwheel: Heidenhain HR510 (remote handwheel) Universal Milling Head (5-axis machining, simultaneous movement of 2 axes) Max. Spindle Speed: 18,000 rpm Swivel Range C: ±270° Swivel Range A: ±185° Max. Rotation Speed A/C: 30 rpm Working Torque A/C: 450 Nm Clamping Torque Axes: 1,400 Nm Positioning Uncertainty: 8 arcsec / Deviation: 4 arcsec (VDI/DGQ 3441) Spindle Power (S1/S6): 22/33 kW Spindle Torque (S1/S6): 84/128 Nm Continuous Operation, Constant Power: 2,500–18,000 rpm Continuous Operation, Constant Torque: 10–2,500 rpm Tool Holder: HSK-A63 DIN 69893 Rigid tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool Changer (overlapped wheel, with change arm) Magazine Capacity: 80 positions Max. Tool Ø: 75 mm Max. Tool Ø with free adjacent pocket: 125 mm Max. Tool Weight: 10 kg Max. Tool Length: 600 mm (for 40 tools) Max. Tool Length: 250 mm (for 40 tools) Tool Type: HSK-A63 DIN 69893 Measuring Systems Laser Tool Setter: tool length/radius + tool breakage monitoring (software included) Probe for workpiece measurement/alignment: wireless transmission, CNC cycles included Monitoring Sensor for vibration/collision detection: response time approx. 1 ms Coolant System external/internal (LEU/LEIUHP) Tank Capacity: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External cooling: max. 30 l/min, max. 10 bar ICS: max. 30 l/min, max. 70 bar Additional Options/Features External tool spray mist Compressed air through spindle (High Speed) up to 24,000 rpm

Gamybos metai: 2007, būklė: naudotas, Dantytės skersmuo - išorinis dantratukas: 1200 mm Dantytės skersmuo - vidinis dantratukas: 1200 mm Dantytės plotis - maks.: 260 mm Valdymas: Liebherr PC-NC Detalės skersmuo - maks.: 1500 mm Stalo skersmuo: 900 mm Stalo kiaurymės skersmuo: 320 mm Maks. stalo apkrova: 95 kN Variklio galia: 30 kW Aušinimo skysčio siurblys: 120 l/min Ašies atstumas tarp stūmoklio ir ruošinio stalo: 0–820 mm Stūmoklio skersmuo: 125 mm Įrankio laikiklis: SK 45 DIN Staklių svoris apie: 26 t Užimama vieta apie: 8,073 x 6,183 x 4,375 m Judėsiai: - Judesio ilgis min./maks.: 0 mm / 270 mm - Judesio ilgio reguliavimas: 270 mm - Judesių skaičius (dvigubas judesys): 10–270 DH/min Įranga/Priedai: - Drožlių transporteris - Pjovimo galvutės laikiklis SK 45 DIN - Aušintuvas Hnodpfx Adjw Rf S Eemok - Techninė dokumentacija

Būklė: geras (naudotas), Wheel diameter - max. 1600 mm Wheel width 250 mm Hnodpfx Adsu Dbucemek Module - max. 30 Module - min. 8 Tooth height 58 mm Tooth width 250 mm Machine weight approx. 42.3 t Space required approx. 4.45 x 6.00 m - Cone distance in mm for spiral angle 30° minimum: 150 maximum: 800 - Cone angle, in degrees minimum: 5 maximum: 85 - Tooth angle minimum: 0° maximum: 45° - Number of teeth to be cut minimum: 10 maximum: 150 The machine is complete, fully functional and in good condition. Equipment / Accessories: - complete set of change gears - 4 pcs. cutter heads - various milling cutters - Operating manual in English

Būklė: geras (naudotas), Gamybos metai: 2000, krumpliaračio skersmuo: 449 mm, Ausgestattet mit: Fanuc 150MB CNC-Steuerung Trockenschneiden Schneidwerkzeug-Abdeckung Späneabsauganlage Automatische Türen Hydraulikanlage Zentralschmierung Arbeitsleuchte Signalampel Technische Daten: Größtes Übersetzungsverhältnis: 10:01 Arbeitsbereich (kontinuierlich): Maximale Zahntiefe: 15,24 mm Maximale Zahnbreite: 50,8 mm Arbeitsbereich Achsen: X-Achse (horizontal): -114 bis 178 mm Y-Achse (vertikal): -178 bis 190 mm Z-Achse (Schlitten-Grundplatte): -10,16 bis 500 mm Schwenkbereich Werkstückspindel (B-Achse): -3 bis 90° Maximaler Abstand Maschinenspindelmitte zur Spindelseite: 165 mm Anzahl Zähne: 5 - 200 (inklusive) Max. Teilkreisdurchmesser (Modul) bei typischem 35° Spiralwinkelgetriebe mit Max. Fräserdurchmesser 12" bei folgenden Übersetzungen: Formfräsen Hnedpfx Adoruakgomjk 1 x 1 – 13,5" – 342,9 mm 2 x 1 – 16,0" – 406,4 mm 5 x 1 – 17,7" – 450,0 mm Wälzfräsen (210 mm Fräserdurchmesser) 1 x 1 – 10,560" – 268,22 mm 2 x 1 – 10,286" – 275,00 mm 5 x 1 – 11,810" – 300,00 mm Fräskopf-Durchmesser: Helixact: 100, 125, 169, 200, 250, 320 mm Kontinuierliches Tauchverfahren, Tetrachlorethylen: 102 – 210 mm Werkstückspindel: Bohren großer Durchmesser: 5 3/64" Konische Steigung auf 304,8 mm (1 Fuß): 21/32" Kegeltiefe: 5,29" Durchmesser komplette Spindelbohrung: 3,35" Geschwindigkeiten: B-Achse, Werkstückspindel-Schwenkachse: 30° A-Achse, Werkstückspindel U/min: 0 – 83 min⁻¹ X-Achse horizontal: 80 mm/s Y-Achse vertikal: 80 mm/s Z-Achse Schlitten-Grundplatte: 80 mm/s Stellfläche (L x B x H, ca.): 4,75 x 3,40 x 2,54 m / 188" x 134" x 100" Maschinengewicht (ca.): 10.980 kg / 24.156 lbs