Horizontalios juostinės pjūklai – pusiau automatiniai – apvali pjovimo sritis 0–300 mm pirkti naudotą (115)

Būklė: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 450x320 mm Saw band length 4250x34x1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Godpfofgyicox Apyeuh Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cutting left and right 60° without machine conversion · 34 mm saw band width · Large material support turntable, ball bearing mounted · Saw band guides positioned via extra-wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Free-standing, safe and ergonomic control console · Storage space for saw bands and consumables · Cutting pressure and feed rate regulator · Fully hydraulic vice · Super-fast preclamp (front loading) · Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lower feed to material or start cutting for serial cuts 4. Stop saw band 5. Raise frame just above material 6. Release vice Optimal, material-independent cutting results through fine adjustment of the saw frame using: * Pressure control valve (cutting pressure-force) * Feed control valve (speed) * Switches with pictograms, easy and clear to operate

Būklė: naujas, Saw frame: Swivel frame Saw band dimensions: 2730 x 27 x 0.9 mm Band speed: 35/70 m/min Cutting capacity round: 230 mm Cutting capacity square: 230 mm Cutting capacity rectangular: 320 x 130 mm Dimensions (LxWxH): 1350 x 770 x 1300 mm Working height: 760 mm Coolant pump motor: 0.12 kW Weight approx.: 525 kg Cutting capacity 45°: round 210 mm, square 180 mm, rectangular 230 x 160 mm Cutting capacity 60°: round 120 mm, square 100 mm, rectangular 120 x 100 mm Gedpfx Aperzx Dlsyouh Cutting capacity -45°: round 180 mm, square 150 mm, rectangular 230 x 100 mm Motor: 1.3 kW KK Kletzer 230DG Hydraulic Double Mitre Head Bandsaw. Heavy-duty construction from structural steel. Standard accessories: - M42 bimetal saw blade - Variable speed - Inverter control unit - Coolant system - Automatic blade breakage shut-off system - Manual vice - Hydraulic bow - Blade tensioning device - Pendant control - Double mitre head (2-way mitre cutting) - Heavy-duty gearbox

Būklė: naujas, Frame saw: Swivel frame Saw band dimensions: 3160 x 27 x 1.1 mm Band speed: 20-100 m/min Cutting capacity round: 270 mm Cutting capacity square: 270 mm Cutting capacity rectangular: 350 x 220 mm Dimensions (LxWxH): 2230 x 770 x 1450 mm Working height: 910 mm Gujdpfxsrzx Dps Apysh Weight approx.: 525 kg Cutting capacity at 60°: round 150 mm, square 100 mm, rectangular 150 x 100 mm Cutting capacity at 45°: round 240 mm, square 170 mm, rectangular 270 x 210 mm Cutting capacity at -45°: round 210 mm, square 180 mm, rectangular 270 x 210 mm Main motor: 1.5 kW Coolant pump motor: 0.12 kW Band saw KK Kletzer 270DG gravity feed, double miter head, heavy-duty machine made of structural steel Standard equipment: - M42 bimetal saw blade - Variable speed - Inverter control system - Coolant system - Automatic blade breakage shut-off - Manual vice - Gravity feed bow - Blade tensioning device - Pendant control - Double miter head (two directions) - Heavy-duty gearbox

Būklė: naujas, Cutting diameter: 227 mm Saw band length: 2455 mm Table height: 840 mm Cutting width: 260 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 90 degrees: round 227 mm Cutting capacity at 90 degrees: square 220 mm Cutting capacity at 90 degrees: flat 260 x 220 mm Cutting capacity at 45 degrees: round 150 mm Gsdpsfgyh Eefx Apyouh Cutting capacity at 45 degrees: square 145 mm Cutting capacity at 45 degrees: flat 200 x 220 mm Total power requirement: 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Mitre band saw - Automatic cutting - Base frame - Coolant pump - Chip brush for cleaning the saw band - Quick-release vice

Būklė: naujas, Band Saw Machine Manufacturer: OPTIMUM Model: S 275 NV Item No.: 3300265 Condition: New machine Cutting capacity (round): 225 mm Cutting speed: 20 – 90 m/min Gusdpfsdynpcox Apyjh Standard equipment includes: - Horizontal vice - Length stop - Automatic shut-off at end of cut - Chip removal brush - Coolant system - Operating manual

Būklė: naujas, The SPECIAL 411 MS MACC is a semi-automatic bandsaw designed for cutting solid bars and small profiles, offering high performance and excellent precision. The robust frame ensures necessary rigidity and accuracy for the cutting group. The blade drive is equipped with a two-speed motor, and the special gearbox is complete with a bronze gear and a hardened, ground worm screw. The properly sized flywheels and the blade guides are sturdy, constructed with sealed roller bearings and adjustable carbide inserts. The blade tension can be applied via an electromechanical micro-switch control, operating with blade rotation. Safety devices are provided on the flywheel cover guard and the blade itself. The machine also comes with a swivel plate for material support and a vise with a quick-approach mechanism. Operation: Cycle start is initiated by pressing the start button; the machine performs the following sequence: 1. Closes the vise and starts the blade motor 2. Lowers the arm for cutting 3. The arm returns to the initial position 4. Stops the blade motor 5. Opens the vise Manual cutting option is available. Cutting speed (m/min): 38–77 Blade thickness (mm): 1.2 Cutting range: 45° left, 60° right Gujdpfjfh R Tyjx Apyoh Stop for repeat cuts: Adjustable Coolant pump power: 0.06 kW

Būklė: naujas, 1 brand new semi-automatic horizontal band saw with double mitre Manufacturer: HUVEMA / Beka-Mak, Origin Turkey Model: HU 230 DGH-4 / BMSY 230 DGH Technical Data: Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Coolant pump motor power 0.12 kW 2 speeds 35 / 70 m/min Gujdpfxsvyidmj Apyeh Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions (L x W x H) 1350 x 700 x 1300 mm Weight 415 kg Equipment / Special Features: • Semi-automatic operation • Hydraulic vice, actuated via foot pedal • Double mitre cuts via pivoting saw frame o The workpiece remains stationary! o No need to turn the material for mitre cuts! o High efficiency and significant time savings! • Fixed precision stops at 0°, 45°, and 60° to the left, and 45° to the right • Replaceable work table • Hydraulic vice, laterally adjustable to the left and right • Adjustable length stop (500 mm) for repeat cuts of identical length • The lowering of the saw arm is continuously variable by hydraulic system; after cutting, the arm raises automatically and the vice opens • Coolant system • Swarf brush • Swiveling control panel • Electrical safety switch for blade tension and blade guard • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Būklė: naujas, Semi-automatic metal band saw with high cutting precision. This machine enables 90° cuts as well as continuously adjustable mitre cuts, from left up to 45° and right up to 30°. (Swivel range: left 45°, right 60°) Standard equipment: - Large rotatable support table, wear-free! (The saw band channel rotates with the mitre) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Saw frame height limitation via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – tube) - Lowering of the saw arm by hydraulic cylinder; stepless adjustment - Manual lifting of the saw arm after the cut - Easy, manual lateral adjustment of the vice (L/R) - Electric blade tension monitoring with saw blade breakage detection - Coolant pump with dual supply to the saw band guides - Carbide saw band guides and guide rollers - Bi-metal saw blade M 42 - Chip brush Technical data Gjdpfod Dpz Sjx Apyjuh ● Cutting range: round flat square 90° 278 340 x 275 275 45° R 260 320 x 255 230 30° R 155 145 x 115 115 45° L 205 145 x 275 180 ● Drive power: 1.5 kW // 400 V // 50 Hz ● Band speed: 20–120 m/min, stepless ● Saw band dimensions: 3125 x 27 x 0.9 mm ● Minimum residual piece length: 20 mm ● Smallest ø: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1500 x 2100 mm ● Weight: 410 kg

Būklė: naujas, Electric voltage: 400 V Frequency: 50 Hz Number of phases: 3 / 3 Ph Weight: 486 kg Blade dimensions: 2700 x 27 x 0.9 mm Godpfx Aped R Uz Tjyjuh

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 150 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950x27x0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment/features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for all functions * Mounted front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of saw frame lowering - Carbide saw blade guides - Hydraulic saw blade tensioning incl. digital value display - 2 saw blade speeds - 1 x bi-metal saw blade - Coolant system - 1 x angle stop - Swarf removal brush - Machine frame with forklift pockets - Operating manual in German Gjdpfxoxaatbo Apyjuh Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Būklė: naujas, Ex-display promotion. NEW. No. 1 available for immediate delivery. CE warranty. The MACC SPECIAL 335 MS is a semi-automatic bandsaw designed for cutting solid bars and small-section profiles, offering high performance and excellent precision. Its robust construction provides the rigidity and accuracy required for the cutting unit. The blade drive features a dual-speed motor and a special gearbox with a bronze gear and a hardened, ground worm screw. Adequately sized flywheels and robust blade guides, equipped with sealed bearings and adjustable carbide plates, ensure reliable operation. Blade tensioning is managed via an electromechanical micro-switch by rotating the blade. The machine is fitted with safety devices on the flywheel covers and the blade, and includes a swiveling worktable for material support and a vice with rapid approach function. Operation: The cutting cycle is started with a start button, and the machine will: 1. Close the vice and start the blade motor; 2. Lower the saw bow to perform the cut; 3. Return the bow to the starting position; 4. Stop the blade motor; 5. Open the vice. Manual cutting mode available. Guedpjg S Ui Asfx Apyoh Cutting speed (m/min): 38-77 Cutting thickness (mm): 1.2 Miter cutting range: From 45° left to 60° right Adjustable stop for repeat cuts Electropump for blade coolant: 0.06 kW Cutting capacity at 0° (Round / Square / Rectangle): 260 / 250x250 / 220x330 mm Cutting capacity at 45° left (Round / Square / Rectangle): 225 / 210x210 / 160x225 mm Cutting capacity at 45° right (Round / Square / Rectangle): 215 / 200x200 / 160x210 mm Cutting capacity at 60° right (Round / Square / Rectangle): 130 / 130x130 / 130x140 mm Blade dimensions: 3010x27x0.9 mm Weight [kg]: 415

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (flat): 110 x 110 mm Vice opening: 285 mm Speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 435 kg Space requirement: approx. 1000 x 2000 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts up to 60° - MEP EVO microprocessor control for management of all functions * rotatable, front right - Choice of manual or automatic lowering of saw bow * stepless adjustment of saw frame lowering - Saw blade guides made from carbide plates - Hydraulic saw blade tensioning – with digital tension display - 2x saw blade speeds - 1x bi-metal saw blade - Coolant system Gujdpfxow U U Uwe Apyeh - 1x mitre stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation mode: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Būklė: naujas, MACC 320 MS Semi-Automatic Bandsaw Condition: New "CE" Technical data sheet attached. Guodpfxofibfaj Apysh Available for immediate delivery while stock lasts The core features of the machine (blade support rigidity, flywheel sizing, band guiding and tensioning system) have been meticulously engineered to prevent band fatigue, extend service life, and improve cutting accuracy and speed. Vertical rotation on an adjustable, backlash-free tapered roller bearing pivot. Band drive via two-speed motor and special gearbox with bronze gear and hardened, ground worm screw. Flywheels optimally dimensioned. Robust band guides featuring sealed roller bearings and adjustable carbide guide plates. Band tensioning achieved by an electromechanical device equipped with blade rotation micro switch control. Safety device against accidents fitted on the flywheel cover, control handle, and blade. Cutting thickness: 1.2 mm Cutting range: 0° to 60° right Adjustable stop for repetitive cuts of the same length. 0.06 kW electric pump for band cooling Operation: Start the cutting cycle by pressing the start button, the machine: 1. Closes the vice and activates the band motor 2. Lowers the arm for cutting 3. Returns the arm to the starting position 4. Stops the band motor 5. Opens the vice Manual cutting option available OPTIONAL ACCESSORIES: - SINGLE-PHASE motor 69 m/min - Speed variator from 20 to 90 m/min

Būklė: naujas, Model designation Shark 282 SXI evo Godpsgvkctefx Apyeuh

Būklė: naujas, Model designation Shark 281 SXI evo Guedpfx Ajgvkglopyjh