Horizontalios juostinės pjūklai – pusiau automatiniai – apvali pjovimo sritis 0–300 mm pirkti naudotą (119)

Būklė: naujas, Semi-automatic metal band saw with high cutting precision. This machine enables 90° cuts as well as continuously adjustable mitre cuts, from left up to 45° and right up to 30°. (Swivel range: left 45°, right 60°) Standard equipment: - Large rotatable support table, wear-free! (The saw band channel rotates with the mitre) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Saw frame height limitation via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – tube) - Lowering of the saw arm by hydraulic cylinder; stepless adjustment - Manual lifting of the saw arm after the cut - Easy, manual lateral adjustment of the vice (L/R) - Electric blade tension monitoring with saw blade breakage detection - Coolant pump with dual supply to the saw band guides - Carbide saw band guides and guide rollers - Bi-metal saw blade M 42 - Chip brush Technical data ● Cutting range: round flat square Bedod Dpz Sjpfx Alwsdg 90° 278 340 x 275 275 45° R 260 320 x 255 230 30° R 155 145 x 115 115 45° L 205 145 x 275 180 ● Drive power: 1.5 kW // 400 V // 50 Hz ● Band speed: 20–120 m/min, stepless ● Saw band dimensions: 3125 x 27 x 0.9 mm ● Minimum residual piece length: 20 mm ● Smallest ø: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1500 x 2100 mm ● Weight: 410 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Išsamiau Gamintojas: Berg & Schmid. Modelis: GBS250 Super AutoCut. Pagaminimo metai: 2011. Būklė: puikiai veikianti. Bdedpfoy U Dykex Alweg Pjovimo galimybės Apvalios medžiagos (90°): Ø 250 mm Kvadratinės medžiagos (90°): 230 x 230 mm Apvalios medžiagos (45°): apie 210–220 mm Apvalios medžiagos (60°): apie 160–170 mm Pjūklo juostos ilgis: apie 3.000 mm Pjūklo juostos plotis: 27 mm Pjūklo juostos storis: 0,9 mm Kampas ir padėtis Kairysis kampas: 0–60° Dešinysis kampas: 0–45° Hidraulinė pjūklo svirtis su reguliuojama pjovimo jėga Matmenys Ilgis: apie 1500 mm Plotis: apie 1700 mm Aukštis: apie 1800 mm Svoris: apie 500 kg.

Būklė: naujas, Pjovimo skersmuo 185 mm Juostos pjūklo ilgis 2.085 x 20 x 0,90 mm Stalo aukštis 915 mm Bodpfx Aljhpktrewodg Juostos greitis 35/70 m/min Pjovimo diapazonas prie 90°: apvalus 185 mm Pjovimo diapazonas prie 90°: kvadratinis 150 mm Pjovimo diapazonas prie 90°: plokščias 220 x 150 mm Maitinimo įtampa 400 V Bendras galios poreikis 0,8 kW Įrenginio svoris apie 195 kg Reikalinga vieta apie 550 x 1.280 x 1.740 mm Metalinė juostinė pjovimo staklė su bepakopiu elektroniniu greičio reguliavimu ir automatiniu nuleidimu. • Perjungiklis, skirtas hidrauliniam arba rankiniam juostos rankos nuleidimui • Pjovimo rankena reguliuojama iki 60° į dešinę • Greito prispaudimo spaustukas • Juostos kreiptuvas su 8 rutuliniais guoliais • Hidraulinis juostos įtempimas su spaudimo indikatoriumi ir juostos lūžimo sauga • Įskaitant aušinimo sistemą • Įskaitant staklių pagrindą

Būklė: naujas, Cutting diameter: 250 mm Saw band length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t Bjdpfofg E H Iex Alwjdg MEP Sawing Machine: - Saw frame, vise assembly, and base constructed from highly durable cast iron - Precision angle indicator on the cast iron structure - Electrical system (with fully identifiable wiring and 24V low voltage system) - IP 55 control lever for manual cycles (if applicable) - Rotating chip brush for cleaning the saw band - Quick-approach vise closure assembly - Accurate end stops with settings for miter cuts at 0°, 45°, and 60° to the left - Bi-metal saw blade, 2950 x 27 x 0.9 mm - Tools, operating instructions, and spare parts order manual provided in user’s language SHARK 281 – manual operation model; SHARK 281 CCS – manual operation with automatic cutting via gravity head-feed. CCS (Cut Control System) with: A) Switch for manual/automatic cutting mode B) Adjustable cutting speed C) Hydraulic brake with tank D) End-stop for band shutoff CCS is also available as an option for previously manufactured machines. Vise with quick adjustment Hydraulic indicator for band tension Electric coolant pump for band cooling and lubrication, with accessible coolant tray above the machine base On models with pneumatic vise (MA), the vise is opened and closed via a manual valve (pedal control available as an option)

Būklė: naujas, Cutting diameter: 220 mm Saw blade length: 2450 x 27 x 0.9 mm Table height: 915 mm Band speed: 35 + 70 m/min Connection voltage: 400 V Cutting capacity at 90°: round 220 mm Cutting capacity at 90°: square 210 x 210 mm Cutting capacity at 90°: flat 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 240 kg Space requirement: approx. 870 x 1550 x 1740 mm Bedefgyh Nopfx Alwodg The Zimmer Z241/R is a fully automatic down-feed saw for mitre cuts from 0° to 60° to the left. After completing the cut, the machine stops automatically via a safety limit switch. The down-feed rate is infinitely variable and can be adjusted through a hydraulic system. Raising the saw arm after the cut can be done to any desired position, and the saw arm will remain securely in your chosen position. The Z241/R comes equipped with the following features: Hydraulic cylinder, coolant pump, excenter clamp, base frame, saw blade, 400V plug (16A). The machine is delivered fully assembled and ready for immediate operation.

Būklė: naujas, Model designation Bjdpfxogvkcte Alwedg Shark 282 SXI evo

Būklė: naujas, Model designation Shark 281 SXI evo Bedpfx Alegvkgljwjdg

Būklė: naujas, Cutting capacity at 90 degrees: round 250 mm Bsdpefgyh Rofx Alwsdg Cutting capacity at 90 degrees: square 210 mm Cutting capacity at 90 degrees: rectangular 290 x 210 mm Blade length 2,965 x 27 x 0.9 mm Table height 940 mm Blade speed 25 - 90 m/min Total power requirement 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed 25 - 90 m/min - Miter cuts up to 60° to the left and 45° to the right - Ball bearing turntable for rapid miter adjustment - Movable quick-release vise - Quick clamping lever - Automatic coolant system

Būklė: naujas, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 210 mm Cutting capacity at 90 degrees: rectangular 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 35 + 70 m/min Bsdpsd Iip Nsfx Alwjdg Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double-mitre metal bandsaw with: - Blade speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for fast mitre adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Būklė: naujas, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic, equipped with: - Hydraulic vise - Material height sensor - Cutting control via ammeter - Cutting pressure feed regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy miter adjustment - Movable quick-release vise - Quick-release lever Bdjdpfxofgyh Ss Alwsg - Automatic coolant system

Būklė: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 450x320 mm Saw band length 4250x34x1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cutting left and right 60° without machine conversion Bdedpfxofgyicj Alweg · 34 mm saw band width · Large material support turntable, ball bearing mounted · Saw band guides positioned via extra-wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Free-standing, safe and ergonomic control console · Storage space for saw bands and consumables · Cutting pressure and feed rate regulator · Fully hydraulic vice · Super-fast preclamp (front loading) · Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lower feed to material or start cutting for serial cuts 4. Stop saw band 5. Raise frame just above material 6. Release vice Optimal, material-independent cutting results through fine adjustment of the saw frame using: * Pressure control valve (cutting pressure-force) * Feed control valve (speed) * Switches with pictograms, easy and clear to operate

Būklė: naujas, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx. 450 kg Space requirement approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° and right 45° • Material height sensor (automatic cut start detection) • Monoblock frame and gearbox for extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Precision industrial bearings • Heavy-duty vice and machine castings • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter Bedefn Andspfx Alwjdg • Feed pressure regulator • Support roller (material infeed side) • Ball-bearing mounted rotating table Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid descent to beginning of the material or, for serial cutting, cut immediately 4. Stop saw blade 5. Raise frame just above the material 6. Open vice

Būklė: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting capacity flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx. 8.45 t Dimensions (L x W x H): 4.485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer premium sawing technology and top performance when cutting specialty steels. • The electro-welded machine frame and the steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven with adjustable speed. • All machine movements (saw bow, vice, feed, saw band guides) operate via state-of-the-art linear guides with high static and dynamic load capacity, ensuring minimal sliding friction. Bdedpfx Aefg E Hpslwog • Another distinguishing feature is the material positioning rollers, which are hydraulically driven. They move perpendicular to the material, allowing for optimal clamping. • Thanks to height control of the saw blade position, the operator can set the band close to the material's top edge. After cutting, the band automatically returns to its previous position. Alternatively, the band can remain in the lower position. During the cutting cycle, the software compares the cutting load with preset values, enabling the sawing process to stop in case of anomalies. • The saw blade is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly quiet operation at a constant pressure. • Precision-ground carbide inserts clamp the saw blade, complete with lateral hardened and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw blade is tensioned via a hydraulic cylinder controlled by the machine software. The tension is automatically released after a specified time when the machine is idle or when a cycle has finished. • CNC-controlled automatic versions are available in the X-TECH 900 / 1200 models, featuring a 500 mm feeding length for high-production applications. • The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, ensuring precise positioning even at maximum load. • All guided movements are handled by four recirculating ball linear guides with high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Būklė: naujas, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangle 290 x 210 mm Saw blade length 2,965 x 27 x 0.9 mm Table height 940 mm Blade speed 35 / 70 m/min Total power requirement 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cutting monitoring via ammeter - Cutting pressure feed regulator - Blade speed 34 / 74 m/min - Mitre cuts up to 60° to the left and 45° to the right - Patented, ball-bearing turntable for easy mitre adjustment Bdsdpfx Asd Iip Rolwjg - Quick-release movable vice - Quick-action clamping lever - Automatic coolant system Shipping cost share: 120 EUR

Būklė: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Bodsurc S Rspfx Alwodg Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 35 + 70 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.42 t Space requirements: approx. 1.23 x 1.7 x 1.75 m Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° left and 45° right - Ball bearing mounted rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system

Būklė: naujas, Pjovimo skersmuo 250 mm Juostinio pjūklo juostos ilgis 2950x27x0,9 mm Juostos greitis 36/72 m/min Bendras galios poreikis 1,8 kW Staklių svoris apie 440 kg Absoli speciali kaina!! 7170,-EUR (Dabartinė kaina nuo 2024 m. – 9425,-EUR) Bazinis komplektas: Spaustuvai su greito reguliavimo ir reguliuojamais kreipiančiaisiais Hidraulinė juostos įtempimo sistema su slėgio indikatoriumi Stovas su nuimama aušinimo skysčio talpa Drožlių šepetys Nustatyti preciziniai sustojimai pjovimui: 0°, 45° ir 60° kairėje bei 45° dešinėje Sukamasis stalas dvigubiems kampiniams pjūviams Elektrinė aušinimo sistema 48 V (Galima sumontuoti mikro-purškimo įrenginį) Bdjdjfg E H Njpfx Alweg

Būklė: naudotas, Gamybos metai: 1998, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular Saw blade length: 2965 x 27 x 0.9 mm Table height: mm Blade speed: 37 / 76 m/min Total power requirement: 1.0 kW Machine weight: approx. 0.38 t Space requirement: approx. 1.0 x 1.6 x 1.4 m Double mitre band saw Bedpfx Aeu Sbpvolwsdg

Būklė: naujas, Cutting diameter: 227 mm Saw band length: 2455 mm Table height: 840 mm Cutting width: 260 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 90 degrees: round 227 mm Cutting capacity at 90 degrees: square 220 mm Cutting capacity at 90 degrees: flat 260 x 220 mm Cutting capacity at 45 degrees: round 150 mm Cutting capacity at 45 degrees: square 145 mm Cutting capacity at 45 degrees: flat 200 x 220 mm Total power requirement: 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Mitre band saw Bdodpfxsfgyh Eo Alweg - Automatic cutting - Base frame - Coolant pump - Chip brush for cleaning the saw band - Quick-release vice

Būklė: naujas, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Bdodpfxefgyh Uo Alwjg Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total connected load: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal bandsaw, frequency inverter, hydraulic semi-automatic, type GBS 250 Super HA-I Easy • Mitre cuts: left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast as a single piece – very quiet operation with minimal vibrations • Hydraulic vise, laterally adjustable • Guided, high-quality industrial bearings • Heavy-duty vise and machine base casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball bearing turntable Semi-automatic operation sequence: 1. Clamp the material 2. Saw start 3. Rapid downfeed to material start, or cut immediately for serial cutting 4. Switch off saw band 5. Raise the frame to just above the material 6. Open the vise

Būklė: beveik kaip naujas (parodų įrenginys), A demonstration metal band saw with base, quick-release device, and coolant system. Cutting capacity: Round / Rectangular / Flat 90°: 220 / 220x220 / 250x155 mm Bodpfx Ajpgmkyelwjdg Round / Rectangular / Flat 45°: 160 / 160x160 / 160x100 mm Round / Rectangular / Flat 30°: 100 / 100x100 / 100x85 mm Cutting speed: 32 / 66 m/min For further technical data, please refer to the PDF document. Technical data and dimensions are subject to change and errors excepted.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Cutting capacity at 0° round (pipe): 300 mm Bdedpfsxz Dqmex Alwsg Cutting capacity at 0° round (solid): 180 mm Cutting capacity at 0° rectangular flat (hollow section): 320 x 290 mm Cutting capacity at 0° bundle (pipe): 320 x 160 mm Cutting capacity at -45° round (pipe): 300 mm Cutting capacity at -45° round (solid): 110 mm Cutting capacity at -45° rectangular flat (hollow section): 300 x 280 mm Cutting capacity at -60° round (pipe): 200 mm Cutting capacity at -60° round (solid): 80 mm Cutting capacity at -60° rectangular flat (hollow section): 190 x 200 mm Cutting capacity at +45° round (pipe): 270 mm Cutting capacity at +45° round (solid): 110 mm Cutting capacity at +45° rectangular flat (hollow section): 270 x 200 mm Table height material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20–100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic pivoting-frame metal bandsaw • After starting the cutting cycle, the vice clamps automatically – once the process is complete, it returns to the starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for sawing e.g. stainless steel, tool steel, hollow sections, and solid materials • With fully hydraulic sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Equipped with a robust three-phase motor • Motor fitted with overload protection • Ball-bearing turntable • Saw arm inclined by 25° for increased blade service life • Pivoting saw arm, adjustable from +60° to -45° • Equipped with a chip removal brush for optimal blade cleaning and maintenance • With frequency inverter: allows stepless adjustment of saw blade speed from 20 to 100 m/min • BRP – saw blade monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control the upper and lower positions of the saw arm • No need to set the upper end position • Length stop with scale, left-side removal 3 m • Cut initiation sensor • Swivelling control panel • Micro-spray device • 2x roller conveyors: 3 m removal left, 6 m material feed right • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1980, mašinos/transporto priemonės numeris: 5780515, Funkcionalumas: visiškai funkcionalus, Metora VMB280 lanko pjūklas su automatiniu padavimu Bjdpfx Aloxxxubswedg • Pjovimo galia: iki 280 mm • Pjovimo kampas: 90° ir reguliuojamas iki 45° • Automatinis padavimas: reguliuojamas hidraulinis padavimas tolygiai pjovimo kokybei • Variklio galingumas: 1,5 kW • Pjovimo greitis: 20–100 m/min (be žingsnių, reguliuojamas) • Svoris: apie 800 kg • Įskaičiuota 3 metrų ritininė padavimo sistema • Montuotas pjūklo diskas

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (flat): 110 x 110 mm Vice opening: 285 mm Speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 435 kg Space requirement: approx. 1000 x 2000 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts up to 60° - MEP EVO microprocessor control for management of all functions * rotatable, front right - Choice of manual or automatic lowering of saw bow * stepless adjustment of saw frame lowering - Saw blade guides made from carbide plates - Hydraulic saw blade tensioning – with digital tension display - 2x saw blade speeds - 1x bi-metal saw blade - Coolant system - 1x mitre stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation mode: - Electro-hydraulic clamping of the vice Bdjdpew U U Uwjfx Alweg - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Bedpfxoxaatbe Alwsdg Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 150 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950x27x0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment/features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for all functions * Mounted front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of saw frame lowering - Carbide saw blade guides - Hydraulic saw blade tensioning incl. digital value display - 2 saw blade speeds - 1 x bi-metal saw blade - Coolant system - 1 x angle stop - Swarf removal brush - Machine frame with forklift pockets - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 460 kg Space requirement approx. 1150 x 1970 mm Features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for managing all functions * Swivel-mounted on the front right - Choice of manual or automatic saw frame descent * Infinitely variable adjustment of saw frame descent Bsdpexaa S Refx Alwjdg - Saw blade guides made from carbide plates - Hydraulic saw blade tensioning – incl. digital value display - 2-speed saw blade operation - 1x Bi-metal saw blade - 1x Mitre stop - Chip cleaning brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit