Horizontalios juostinės pjūklai – pusiau automatiniai – apvali pjovimo sritis 0–300 mm pirkti naudotą (108)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Išsamiau Gamintojas: Berg & Schmid. Modelis: GBS250 Super AutoCut. Pagaminimo metai: 2011. Būklė: puikiai veikianti. Pjovimo galimybės Apvalios medžiagos (90°): Ø 250 mm Kvadratinės medžiagos (90°): 230 x 230 mm Apvalios medžiagos (45°): apie 210–220 mm Apvalios medžiagos (60°): apie 160–170 mm Pjūklo juostos ilgis: apie 3.000 mm Pjūklo juostos plotis: 27 mm Pjūklo juostos storis: 0,9 mm Kampas ir padėtis Guedpfx Aqjy U Dykslsc Kairysis kampas: 0–60° Dešinysis kampas: 0–45° Hidraulinė pjūklo svirtis su reguliuojama pjovimo jėga Matmenys Ilgis: apie 1500 mm Plotis: apie 1700 mm Aukštis: apie 1800 mm Svoris: apie 500 kg.

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: 08063895, galia: 0,75 kW (1,02 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: Oro kondicionierius, KNUTH B180 Parduodama tvirta ir patikima metalo apdirbimo kampinė juostinė pjūkla. Gsdpfxsy R T R Rj Aqleuc Techniniai duomenys: Pjovimo galimybės: * 90° stačiakampis: 180 × 290 mm * 90° apvalus: 180 mm * 45° stačiakampis: 100 × 120 mm * 45° apvalus: 100 mm Juostos greičiai: * 22 / 33 / 45 / 65 m/min Pavara: * Pagrindinio variklio galia: 0,75 kW * Maitinimo įtampa: 400 V Matmenys ir svoris: * Juostos matmenys: 2360 × 20 × 0,9 mm * Įrenginio išmatavimai: 1244 × 457 × 1580 mm * Svoris: apie 105 kg Įranga ir privalumai: * Tikslūs kampiniai pjūviai * Tvirta ir stabili konstrukcija * Reguliuojami keli juostos greičiai * Idealiai tinka plienui, nerūdijančiam plienui ir kitiems metalams * Tinkama dirbtuvėms ir profesionaliam naudojimui Būklė: naudota / visiškai veikianti Apžiūra ir bandomasis paleidimas galimi pagal susitarimą Jei susidomėjote – kreipkitės.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, įvesties srovės tipas: Nuolatinė srovė, pjovimo aukštis (maks.): 285 mm, Apvalaus plieno pjovimo diapazonas ties 45°: 230 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 250 mm, juostinio pjūklo ilgas: 2 950 mm, pjūklo juostos plotis: 27 mm, Title: MEP SHARK 282 CCS [with semi-automatic descent] Article Number: SH282CCS Motor Power: 1.5/1.8 kW Vise Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 440 kg Cutting Speed: 36/72 m/min Cutting Capacity 0°: 250 / 220x220 / 280x220 mm Cutting Capacity 45° right: 230 / 200x200 / 220x200 mm Cutting Capacity 45° left: 200 / 170x170 / 200x140 mm Cutting Capacity 60° right: 120 / 80x80 / 140x80 mm Cutting Capacity 60° left: Description: Gedpfxoy T N I Ro Aqljuc MEP Bandsaw: Standard Equipment: - Quick-action vice with adjustable guide strips - Hydraulic blade tensioning device with tension pressure indicator - Base frame with removable coolant tray - Chip removal brush - Precision stops set for 0°, 45°, and 60° left, and 45° right cuts - Length stop for repetitive cutting - Material support arm, also for attachment of roller conveyor/loading side - Rotary table for double mitre cuts - Designed for transport with pallet truck/forklift - Bi-metal saw blade M2 for solid and profile material - Tool kit and operating manual Electrical Equipment: - Control panel - Marked cable connections - Indicator lamp for operational readiness - Main safety switch - Emergency stop button - Speed selector switch - Thermal-magnetic circuit breaker - Undervoltage release - IP 55 protected control handle - Phase sequence indicator - Low voltage system 24 Volt - Electric coolant system 48 V - (Micro-spray unit optionally addable) Motor: 1.5/1.8 kW 2 Speeds: 36/72 m/min Vise opening: 285 mm Blade: 2950 x 27 x 0.9 mm Weight: 440 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, mašinos/transporto priemonės numeris: 2300223434, Funkcionalumas: visiškai funkcionalus, galia: 1,5 kW (2,04 AG), įėjimo įtampa: 380 V, įėjimo srovė: 16 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: Oro kondicionierius, bendras svoris: 280 kg, Įranga: CE žymėjimas, We purchased the machine new at the time and it has been part of our production since 2018 for occasional sawing operations. Due to a restructuring, the saw is now available and will be sold. The machine is immediately operational and functions perfectly. An on-site inspection under power can be arranged at short notice. We can also organize shipping quickly. BMBS 230 x 280 H-DG – Hydraulic Pivot Frame Metal Band Saw for Miter Cuts from +60° to -45° • Hydraulic pivot frame metal band saw for miter cuts from +60° to -45° • Suitable for sawing, for example, stainless steel, tool steel, hollow profiles, and solid materials • Precise and robust band guides with adjustable carbide inserts • Saw band tension is monitored electromechanically via micro switch • Equipped with cooling system at the band guides • Equipped with swarf removal brush for optimal cleaning and maintenance of the saw band • When lifting the saw arm, the lowering cylinder locks automatically in the upper position – no additional locking at the cylinder is necessary • Saw arm inclined by 25°, resulting in longer saw blade service life • Upon completion of the cutting operation, the saw band stops automatically • Lowering of the saw arm by its own weight or manually (H-DG) Scope of delivery: • Saw blade • Coolant pump • Operating tools • Vice with quick-release mechanism Technical data Electrical connection: 400 V / 50 Hz Motor power: 1.4 / 2.0 kW Speed settings: 2 Saw band speeds: 35 / 70 m/min Saw band dimensions: 2720 x 27 x 0.9 mm Dimensions (L x W/D x H): 1650 x 885 x 1860 mm Table height material feed: 785 mm Weight: 280 kg Max. feed length per stroke Minimum remnant workpiece length in CNC operation Minimum remnant workpiece length in manual operation Cutting ranges Cutting range 0° round tube/profile: 230 mm Cutting range 0° round solid: 150 mm Cutting range 0° square material flat: 280 x 180 mm Cutting range 0° square material upright: 260 x 230 mm Cutting range -45° round tube/profile: 195 mm Cutting range -45° round solid: 110 mm Further cutting ranges available in the documentation. Gusdpfx Aqjy R Dcdoloc

Būklė: naujas, Gamybos metai: 2026, Ultra-robust, reliable, and modern semi-automatic metal band saw with automatic raising and lowering of the saw arm. The saw arm swivels both left and right from -45º to +60º. This machine is indispensable in any metalworking shop, making it ideal for cutting pipes, profiles, and solid materials. Product Features The CORMAK S-200RH saw is equipped as standard with automatic raising and lowering of the arm, as well as a height regulator enabling the arm to be raised to a level matching the material being cut. Thanks to the automatic hydraulic damper, manual operation is simplified to feeding and clamping the material in the vise. The arm is made from a single cast iron piece and, together with a refined, massive, and stable construction, ensures exceptional rigidity of the S-200R band saw, resulting in dependable operation and very high cutting precision. The innovation and production of CORMAK PREMIUM LINE semi-automatic and automatic band saws, manufactured according to ISO:90001 and ISO:140001 certified standards, guarantees safety, quality, and reliability. The use of M3V series motors from ABB—a globally recognized and respected manufacturer, and one of the world leaders—guarantees long, trouble-free operation. As the manufacturer and sole representative in the Polish market, we guarantee product authenticity and provide professional, well-trained warranty and post-warranty service. Technical Data TYPE – semi-automatic ARM LIFTING AND LOWERING – hydraulic with stepless adjustment BAND SPEED – 36/70 mm/min MITER CUTTING – left 45° to right 60° VISE – hydraulic MINIMUM CUTTING DIAMETER – Ø5 mm MINIMUM MATERIAL LENGTH IN VISE – 30 mm VISE BASE HEIGHT – 780 mm BAND SIZE – 27x0.9x2910 mm TOTAL POWER – 2.1 kW DIMENSIONS (LxWxH) – 1600 x 800 x 1400 mm WEIGHT – 530 kg Cutting Capacity Angle 0º -----ø250 320 x 240 240 x 240 45º L ø200 220 x 120 190 x 190 Guedpfxei D D A Ss Aqloc 45º R ø220 235 x 120 210 x 210 60º R ø110 155 x 110 100 x 100 Standard Equipment • Control console on a separate pedestal • Integrated hydraulic unit • Hydraulic arm operation (up-down) with stepless lowering speed regulation • Arm position memory (arm returns after cutting to a preset height) • Miter cutting L/R 45° - 0° - 45° - 60° • Band cleaning brush • Cooling system • Bimetal band saw blade • CE declaration of conformity • Operating and maintenance documentation The price listed is NET, does not include shipping costs. For more information, please contact us by phone or email. Visit our website to see our full offer.

Būklė: geras (naudotas), Gamybos metai: 2004, Juostos pjūklas geros būklės + 2 papildomos naujos pjūklo juostos Gujdpfx Aqey Txb Tjljc

Būklė: naujas, Pjovimo skersmuo 185 mm Juostos pjūklo ilgis 2.085 x 20 x 0,90 mm Stalo aukštis 915 mm Juostos greitis 35/70 m/min Pjovimo diapazonas prie 90°: apvalus 185 mm Pjovimo diapazonas prie 90°: kvadratinis 150 mm Pjovimo diapazonas prie 90°: plokščias 220 x 150 mm Maitinimo įtampa 400 V Bendras galios poreikis 0,8 kW Įrenginio svoris apie 195 kg Reikalinga vieta apie 550 x 1.280 x 1.740 mm Gusdpfshpktrox Aqlsc Metalinė juostinė pjovimo staklė su bepakopiu elektroniniu greičio reguliavimu ir automatiniu nuleidimu. • Perjungiklis, skirtas hidrauliniam arba rankiniam juostos rankos nuleidimui • Pjovimo rankena reguliuojama iki 60° į dešinę • Greito prispaudimo spaustukas • Juostos kreiptuvas su 8 rutuliniais guoliais • Hidraulinis juostos įtempimas su spaudimo indikatoriumi ir juostos lūžimo sauga • Įskaitant aušinimo sistemą • Įskaitant staklių pagrindą

Būklė: naujas, Cutting diameter: 250 mm Saw band length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t MEP Sawing Machine: - Saw frame, vise assembly, and base constructed from highly durable cast iron - Precision angle indicator on the cast iron structure - Electrical system (with fully identifiable wiring and 24V low voltage system) - IP 55 control lever for manual cycles (if applicable) - Rotating chip brush for cleaning the saw band - Quick-approach vise closure assembly - Accurate end stops with settings for miter cuts at 0°, 45°, and 60° to the left - Bi-metal saw blade, 2950 x 27 x 0.9 mm - Tools, operating instructions, and spare parts order manual provided in user’s language SHARK 281 – manual operation model; SHARK 281 CCS – manual operation with automatic cutting via gravity head-feed. CCS (Cut Control System) with: A) Switch for manual/automatic cutting mode B) Adjustable cutting speed C) Hydraulic brake with tank D) End-stop for band shutoff CCS is also available as an option for previously manufactured machines. Vise with quick adjustment Hydraulic indicator for band tension Gjdpfx Aqefg E H Isleuc Electric coolant pump for band cooling and lubrication, with accessible coolant tray above the machine base On models with pneumatic vise (MA), the vise is opened and closed via a manual valve (pedal control available as an option)

Būklė: naujas, Cutting diameter: 220 mm Saw blade length: 2450 x 27 x 0.9 mm Table height: 915 mm Band speed: 35 + 70 m/min Connection voltage: 400 V Gedsfgyh Nopfx Aqlsuc Cutting capacity at 90°: round 220 mm Cutting capacity at 90°: square 210 x 210 mm Cutting capacity at 90°: flat 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 240 kg Space requirement: approx. 870 x 1550 x 1740 mm The Zimmer Z241/R is a fully automatic down-feed saw for mitre cuts from 0° to 60° to the left. After completing the cut, the machine stops automatically via a safety limit switch. The down-feed rate is infinitely variable and can be adjusted through a hydraulic system. Raising the saw arm after the cut can be done to any desired position, and the saw arm will remain securely in your chosen position. The Z241/R comes equipped with the following features: Hydraulic cylinder, coolant pump, excenter clamp, base frame, saw blade, 400V plug (16A). The machine is delivered fully assembled and ready for immediate operation.

Būklė: beveik kaip naujas (parodų įrenginys), A demonstration metal band saw with base, quick-release device, and coolant system. Cutting capacity: Round / Rectangular / Flat 90°: 220 / 220x220 / 250x155 mm Round / Rectangular / Flat 45°: 160 / 160x160 / 160x100 mm Round / Rectangular / Flat 30°: 100 / 100x100 / 100x85 mm Cutting speed: 32 / 66 m/min Guedpepgmkyjfx Aqlec For further technical data, please refer to the PDF document. Technical data and dimensions are subject to change and errors excepted.

Būklė: paruoštas naudoti (naudotas), Bewo Mod 270 Pusiau automatinė hidraulinė juostinė pjovimo staklės Metalui pjauti #2050230 Maksimalus spaudimas: 210x210mm Išmatavimai: 130cm x 80cm x 140cm (Ilgis x Plotis x Aukštis) 380v Kintamas pjovimo greitis Su aušinimo pompa Papildoma pjovimo juosta Vaizdo įrašas pasiekiamas mūsų YouTube kanale. Vieta: Budel, Nyderlandai Transportas galimas už papildomą mokestį Dėl daugiau informacijos skambinkite arba rašykite el. paštu. Taip pat peržiūrėkite kitus mūsų skelbimus. Ištisus metus ieškome pramoninių mašinų. Jei turite nereikalingų mašinų, atsiųskite mums jų nuotraukas bei informaciją el. paštu. Pardavėjas neatsako už tipografines ir duomenų perdavimo klaidas. Mašinos išvaizda, techninė būklė ir nusidėvėjimas atitinka jos amžių; naudotos mašinos parduodamos be garantijos. Nurodyta kaina be PVM (nebent nurodyta kitaip). Gedpfx Aqoylppwsleuc

Būklė: geras (naudotas), Gamybos metai: 2000, Pasiūlymas 24477 Techniniai duomenys: - Pjovimo diapazonas 90°: apvalus 220 mm - plokščias 250 x 100 mm - kvadratinis 170 x 170 mm - Pjovimo diapazonas 45°: apvalus 150 mm - plokščias 150 x 150 mm - Kampo reguliavimas į kairę ir dešinę - Pjūklo juostos matmenys: 2890 x 27 x 0,9 mm - Pjovimo greičiai: 40 + 60 m/min - Hidraulinis pjūklaraščio nuleidimas - Pjovimo spaudimas reguliuojamas bepakopiškai: 0 - 10 m/min - Bendra variklio galia: 400 V / 1,5 kW - Užimamas plotas apie: Plotis 1500 x Aukštis 1000 x Gylis 650 mm - Svoris apie: 250 kg Gedpfx Aqoy H Dmheljuc

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, įėjimo įtampa: 400 V, Įranga: CE žymėjimas, Kampinė juostinė pjovimo staklės - Kampiniams pjūviams kairėn 60° ir dešinėn 45° - Pjovimo greitis: 37+74 m/min. - Automatinis pjūklo rėmo nuleidimas su greita pritraukimo funkcija prie ruošinio ir išsijungimu pjovimo pabaigoje - Greito tvirtinimo spaustuvas T formos griovelyje, stumdomas greitam pozicijos keitimui - Drožlių nuėmimo šepetys - Automatinė aušinimo sistema - Staklių pastatymo pagrindas - Įeina 1 HSS-Biflex pjūklo juosta 2765 x 27 x 0,90 mm Pjūvio sritis: 90° Apvalus Ø 255 mm Kvadratas 240 mm Stačiakampis 300 x 180 mm 45° Apvalus Ø 210 mm Kvadratas 190 mm Stačiakampis 210 x 100 mm Gedpfx Aqsy Id Dcjlouc 60° Apvalus Ø 135 mm Kvadratas 115 mm Stačiakampis 140 x 90 mm

Būklė: naujas, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (square): 250 x 250 mm Cutting capacity at 60° (flat): 170 x 170 mm Cutting capacity at 60° (square): 170 x 170 mm Cutting capacity at 60° (round): 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic-dynamic and manual operation. Equipped with MEP-28 control unit for mitre cuts from 45° right to 60° left. Key features: - New centralized control console mounted on an articulated arm. - Low-voltage operating panel: polyester membrane keypad with thermoformed, raised buttons and activation control signal. - Display for: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Time used for each cut * Saw band motor current draw * Saw blade tension * Saw blade speed * Numeric display of head position - IP55 manual cycle switch handle (24 V). - Complete programming of all special cutting cycles. - Capability to define additional special cutting cycles for specific applications. - Latest-generation high-performance, energy-efficient hydraulic control unit. - Rotating table (mounted on 420 mm roller bearing with preloaded thrust bearing). Guedpsfg E H Ujfx Aqljc - Double band speed (40/80 m/min) with control system. - Prepared for installation of an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit the cut material. - Clamping device laterally movable to left and right, with quick-release vice. - Manual band tension control with display via electronic transducer on screen. - Base frame designed to retain all coolant, even for maximum angle cuts. - Coolant tray (equipped with electric pump for the lubrication and cooling of the saw blade), and chip drawer (can be replaced by a chip conveyor – see special accessories), both integrated in the base frame. - Prepared for installation of a minimum quantity lubrication set for the saw blade (optional, in addition to standard coolant lubrication with emulsion oil). - Chip removal brush. - Machine designed for pallet truck transportation. - Adjustable length stop for repetitive cuts. - Material support arm with roller for attaching the loading table. - Bi-metal saw blade for solid and profile material. - Tools and operating instructions in the respective user language.

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 485 kg Space requirement approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual operation, equipped with an MEP-28 control unit for mitre cuts from 45° right to 60° left. Gsdpfsfg E H Sjx Aqleuc Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw bow lowers for the cut – Motor stops – Saw bow lifts – Vice opens. Semi-automatic dynamic system (manual lowering of the saw arm to the desired position and cycle start via the hand switch.) Key features: - New centralized control console mounted on an articulated arm, allowing the operator to access controls easily from any working position. - Low-voltage control panel: - Polyester membrane keypad with thermoformed raised buttons and operation control light. - Display shows: * Diagnostics (messages in the user's language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time required for the performed cut * Saw motor current draw * Blade tension * Blade speed * Numeric display of head position. - Manual 24-V cycle switch handle, IP55 rated. - Complete program for all special cutting cycles. - Option to set up additional special cutting cycles for specific applications. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Large worktable with turntable on roller bearings, 265 mm with preloaded thrust bearings, installed. - Dual blade speed (36/72 m/min.) with control - Prepared for the installation of an electronic inverter for stepless variation of blade speed from 20 to 90 m/min. - Programmable stroke of the saw arm directly from the control panel for adaptation to the material being cut. - Clamping device adjustable to the left and right, with quick-release vice. - Manual blade tension control with electronic converter display on screen. - Base frame with extendable coolant tray. - Electric coolant pump for band cooling and lubrication. - Preparation for the installation of a minimal lubrication system for the saw band (optional), in addition to standard lubrication with emulsified oil. - Chip cleaning brush. - Machine is designed for pallet truck transport. - Length stop for repetitive cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal bandsaw blade for solid and profile material. - Tools and operating instructions in the respective user language.

Būklė: naujas, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Gusdpfxofg E H To Aqlsc Machine weight: approx. 670 kg Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering is performed by the saw’s own weight, compensated by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feed. Electrical control panel (marked wiring connections, indicator light for operational readiness, main safety switch equipped with padlock, changeover or speed switch, emergency stop, thermomagnetic protection, 24-volt low-voltage system) Electronic blade tension converter with on-screen display. Manual vise with quick-clamping device. Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory). Electric coolant pump for cooling and lubrication of the bandsaw blade. Chip removal brush. Adjustable precision stops for repeated cuts of equal length. Machine designed for pallet truck transport. Bimetal bandsaw blade for solid and profiled material. Tools and operating manual.

Būklė: dilaminuotas dirbtuvėje (naudotas), Naudota pusiau automatinė juostinė pjovimo staklės MEP Shark 281 sxi evo Trys darbo režimai: pusiau automatinis, rankinis ir rankinis dinaminis (gravitacinis) Juostos matmenys: 2950 x 27 x 0,9 mm Gusdpfx Aqoyyn Sujljc Dvi pjovimo juostos greičiai: 36/72 m/min Maks. spaustuvo atidarymas: 285 mm Pjovimo talpa: prie 0° apvalus 250 mm, stačiakampis 280x200 mm prie 45° apvalus 190 mm, stačiakampis 180x180 mm prie 60° apvalus 120 mm, stačiakampis 110x110 mm Pagaminimo metai: 2006 Svoris: 435 kg Pilnai aptarnauta.

Būklė: naujas, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 210 mm Cutting capacity at 90 degrees: rectangular 290 x 210 mm Blade length 2,965 x 27 x 0.9 mm Table height 940 mm Blade speed 25 - 90 m/min Total power requirement 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: Gjdpfx Aqefgyh Rslsuc - Blade speed 25 - 90 m/min - Miter cuts up to 60° to the left and 45° to the right - Ball bearing turntable for rapid miter adjustment - Movable quick-release vise - Quick clamping lever - Automatic coolant system

Būklė: naujas, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 210 mm Cutting capacity at 90 degrees: rectangular 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 35 + 70 m/min Total power requirement: 1.1 / 1.3 kW Guedpfxjd Iip Nj Aqlsc Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double-mitre metal bandsaw with: - Blade speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for fast mitre adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Būklė: naujas, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic, equipped with: Gujdsfgyh Sopfx Aqlec - Hydraulic vise - Material height sensor - Cutting control via ammeter - Cutting pressure feed regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy miter adjustment - Movable quick-release vise - Quick-release lever - Automatic coolant system

Būklė: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 450x320 mm Saw band length 4250x34x1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cutting left and right 60° without machine conversion · 34 mm saw band width · Large material support turntable, ball bearing mounted · Saw band guides positioned via extra-wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Free-standing, safe and ergonomic control console · Storage space for saw bands and consumables · Cutting pressure and feed rate regulator · Fully hydraulic vice · Super-fast preclamp (front loading) · Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lower feed to material or start cutting for serial cuts 4. Stop saw band 5. Raise frame just above material 6. Release vice Optimal, material-independent cutting results through fine adjustment of the saw frame using: Gjdpfxofgyice Aqlsuc * Pressure control valve (cutting pressure-force) * Feed control valve (speed) * Switches with pictograms, easy and clear to operate

Būklė: naujas, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx. 450 kg Space requirement approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° and right 45° • Material height sensor (automatic cut start detection) • Monoblock frame and gearbox for extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Precision industrial bearings • Heavy-duty vice and machine castings • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Feed pressure regulator Gusdefn Andspfx Aqljc • Support roller (material infeed side) • Ball-bearing mounted rotating table Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid descent to beginning of the material or, for serial cutting, cut immediately 4. Stop saw blade 5. Raise frame just above the material 6. Open vice

Būklė: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting capacity flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Gsdpfefg E Hpjx Aqljuc Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx. 8.45 t Dimensions (L x W x H): 4.485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer premium sawing technology and top performance when cutting specialty steels. • The electro-welded machine frame and the steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven with adjustable speed. • All machine movements (saw bow, vice, feed, saw band guides) operate via state-of-the-art linear guides with high static and dynamic load capacity, ensuring minimal sliding friction. • Another distinguishing feature is the material positioning rollers, which are hydraulically driven. They move perpendicular to the material, allowing for optimal clamping. • Thanks to height control of the saw blade position, the operator can set the band close to the material's top edge. After cutting, the band automatically returns to its previous position. Alternatively, the band can remain in the lower position. During the cutting cycle, the software compares the cutting load with preset values, enabling the sawing process to stop in case of anomalies. • The saw blade is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly quiet operation at a constant pressure. • Precision-ground carbide inserts clamp the saw blade, complete with lateral hardened and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw blade is tensioned via a hydraulic cylinder controlled by the machine software. The tension is automatically released after a specified time when the machine is idle or when a cycle has finished. • CNC-controlled automatic versions are available in the X-TECH 900 / 1200 models, featuring a 500 mm feeding length for high-production applications. • The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, ensuring precise positioning even at maximum load. • All guided movements are handled by four recirculating ball linear guides with high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Būklė: naujas, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangle 290 x 210 mm Saw blade length 2,965 x 27 x 0.9 mm Table height 940 mm Blade speed 35 / 70 m/min Total power requirement 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cutting monitoring via ammeter - Cutting pressure feed regulator - Blade speed 34 / 74 m/min - Mitre cuts up to 60° to the left and 45° to the right - Patented, ball-bearing turntable for easy mitre adjustment - Quick-release movable vice - Quick-action clamping lever - Automatic coolant system Gedpfx Aqed Iip Roleuc Shipping cost share: 120 EUR

Būklė: naujas, Gamybos metai: 2024, pjovimo aukštis (maks.): 150 mm, Apvalaus plieno pjovimo diapazonas ties 45°: 108 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 108 mm, BERG+SCHMID Double Mitre Bandsaw GBS 218 Eco AutoCut Cutting speed: 25-80 m/min • Mitre angle left: 60° • For cutting steel, stainless steel, and aluminium profiles • Quick-release vice with fast clamping device • Integrated blade tension control • Carbide blade guides Gedpfot I R Edjx Aqleuc • Electric coolant system • Machine base supplied disassembled The AutoCut system consists of: • Hydraulic cylinder, feed control, spring assembly, limit switch, and enables three operating modes: 1. Automatic saw frame lowering via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at end of cut 2. Rapid lowering of the saw frame from rest position to the workpiece, then switching to normal feed rate 3. Manual operation – hydraulic cylinder functions as a brake cylinder Saw blade dimensions: 2455x27x0.9 mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc., available on request! Delivery time: from stock Waiblingen Beinstein