Horizontali juostiniai pjūklai – visiškai automatiniai – apvali pjovimo zona nuo 400 mm pirkti naudotą (85)

Būklė: naujas, galia: 5,2 kW (7,07 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, pjovimo aukštis (maks.): 410 mm, pjovimo plotis (maks.): 510 mm, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, sukimosi greitis (maks.): 150 aps./min, sukimosi greitis (min.): 10 aps./min, bendras aukštis: 2 220 mm, bendras ilgis: 2 000 mm, bendras plotis: 2 850 mm, bendras svoris: 3 200 kg, stalo aukštis: 800 mm, Įranga: CE žymėjimas, apšvietimas, dokumentacija / vadovas, sūkių greitis be galo kintamas, variklio stabdis, HBE411A „Dynamic“ juostinio pjūklo automato privalumai Juostą vedančios detalės, pagamintos iš pilkojo geležies, yra „Behringer“ gamintos ir užtikrina vibracijos slopinimą tiesiai pjovimo zonoje. Dėl to galima pastebimai padidinti pjovimo juostos tarnavimo laiką. Automatinis padavimo valdymas Dcedpfxez Rwx Ie Ag Dop Galimybė pasirinkti apdorojamą medžiagą iš išsamios medžiagų duomenų bazės. AFC automatiškai apskaičiuoja optimalias pjovimo padavimo ir greičio vertes. Energijos efektyvumas Modernių variklių ir specialios hidraulikos naudojimas sumažina energijos sąnaudas maždaug 30 % lyginant su ankstesniu modeliu. Tikslus vadovavimo mechanizmas, naudojant portalinę konstrukciją Stabilaus, mažai vibruojančio pjovimo rėmo ir tiesinės vadovavimo sistemos, naudojant portalinę konstrukciją, derinys užtikrina geriausius pjovimo rezultatus ir ilgesnį juostinio pjūklo tarnavimo laiką. Elektrinis skiedrų šepetys Su „Behringer“ greito keitimo sistema, leidžiančia lengvai keisti šepetį be įrankių. Dėl specialaus kampo, šepetys nepažeidžia pjovimo juostos dantų. Servo padavimo sistema Pjovimo padavimas vykdomas naudojant rutulinį sraigtinį mechanizmą ir servo variklį. Dėl to labai sutrumpėja papildomas laikas ir padidinamas pjovimo padavimo tikslumas. Jūsų privalumas: didesnis pjovimo našumas ir ilgesnis juostos tarnavimo laikas! Automatinis vadovavimo svirčių reguliavimas Dėl to metalinis juostinis pjūklas užtikrina optimalius pjovimo rezultatus be reguliavimo, net ir dažnai keičiantis medžiagos pločiui. Paprastas valdymas Greitas ir paprastas visų metalinio juostinio pjūklo funkcijų valdymas per jutiklinį ekraną. Dvigubas įtempimo įtaisas užtikrina proceso patikimumą – ypač pjaunant paketus arba atskirus gabalus. Įtempimo žnyklai yra įrengti metalinio juostinio pjūklo tiekimo ir išėjimo pusėje ir fiksuoja tiek pradinę medžiagą, tiek ką tik nupjautas dalis.

Būklė: geras (naudotas), Gamybos metai: 2002, mašinos/transporto priemonės numeris: 122668, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 460 mm, pjovimo plotis (maks.): 600 mm, juostinio pjūklo ilgas: 7 470 mm, pjūklo juostos plotis: 54 mm, dalies ilgis (maks.): 760 mm, skyriaus ilgis (min.): 8 mm, TECHNINĖS DETALĖS Pjūklas Matmenys: 7.470 x 54 x 1,3 mm Pjovimo greitis: be laipsnių reguliuojamas (apie 1:7) Darbo sritis Medžiagos skersmuo – apvalios medžiagos: maks. Ø 460 mm Medžiagos matmenys – kvadratinės medžiagos (plotis x aukštis): maks. 600 x 460 mm Pjūvio ilgis – viengubas ėjimas: min. 8 mm, maks. 760 mm Pjūvio ilgis – daugybinis ėjimas: min. 8 mm, maks. 9.999,9 mm Minimalus ruošinio ilgis automatinėje veikoje: 90 mm Darbo aukštis Darbo aukštis: 720 mm MAŠINOS DETALĖS Matmenys ir svoris Matmenys (I/P/A): 2.320 x 3.660 x 2.570 mm Plotis su drožlių transporteriu (pasirinktinai): 4.650 mm Svoris: apie 6.000 kg Elektros duomenys Pagrindinis variklis: 7,5 arba 9,2 kW Djdpfxezmdrne Ag Djcp Hidraulinis variklis: 2,2 kW Pjovimo variklis: 0,18 kW Aušinimo skysčio siurblys: 0,19 kW Drožlių transporteris (pasirinktinai): 0,18 kW Ritinėlių takelio pavara (pasirinktinai): 0,8 kW NC padėties pavaros (pasirinktinai): 0,37 kW

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 760 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 400 mm, juostinio pjūklo ilgas: 5 920 mm, darbinio aukščio: 720 mm, Nėra minimalios kainos – pardavimas garantuotas aukščiausiam pasiūlytojui! TECHNINIAI DUOMENYS Pjūklo juostos matmenys: 5.920 x 41 x 1,3 mm Pjovimo greitis: bepakopis reguliavimas (1:7) Darbo zona (apvalus): maks. 400 mm Darbo zona (kvadratas): 400 x 370 mm Pjūvio ilgis (vienas eiga): 10 - 760 mm Pjūvio ilgis (daugiakartė eiga): maks. 9.999,9 mm Darbo aukštis: 720 mm Spaudimo jėga: 3.600 N Min. detalės ilgis: 10 mm (35 mm vertikaliai) Pastaba: Išmontavimą ir pakrovimą pardavėjas gali pasiūlyti už papildomą mokestį. Volelinis transporteris į pasiūlymą neįtrauktas. Dcjdpey Ex E Njfx Ag Djp

Būklė: naudotas, Gamybos metai: 1994, Cutting diameter: 520 mm Saw blade length: 7239 mm Cutting width: 1.3 mm Control: POSIMOD Cutting area (square): 520 x 520 mm Feed length: 500 mm Multiple feed length: 4500 mm Minimum cut-off length: 6 mm Residual piece length min./max.: 10 / 100 mm Dcedpfxswm Rm Is Ag Dop Cutting speed: 20 - 130 m/min Saw blade dimensions: 7239 x 50 x 1.3 mm Saw motor: 5.5 kW Total power requirement: 10.0 kW Machine weight approx.: 3.8 t Machine dimensions (L x W x H): 3.42 x 2.30 x 2.40 m - 2-column guided - Accessories: Infeed roller conveyor, 2500 mm long, chip conveyor, coolant system

Būklė: naujas, Cutting range at 90°: round 680 mm Cutting range at 90°: square 640 mm Cutting range at 90°: rectangular 1250 x 600 mm Cutting range at 45°: round 680 mm Cutting range at 45°: square 600 mm Cutting range at 45°: flat 870 x 600 mm Cutting range at 60°: round 580/550 mm Cutting range at 60°: square 530/450 mm Cutting range at 60°: flat 550 x 450 mm Saw blade length: 8140 x 54 x 1.6 mm Blade speed: 15 – 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 5.3 t Space requirement: approx. 5.75 x 4.2 x 2.75 m 2-column double miter band saw for fast cutting, equipped with Pusher System P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved with the new “B&S Positioning System.” An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in combination with a reliable hydraulic brake using large-radial center positioning. The work table is mounted on high-quality, preloaded bearings, ensuring very easy rotation. Djdpfx Ajfg E Hnjg Dscp CNC control The CNC controller allows the programming of up to 90 cutting programs with different cut lengths, quantities, and angles. Double-sided clamping positioning system The B&S pusher system, feed and positioning system, is equipped with "double-sided opening grippers" which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is a separate assembly and is guided by ball-bearing linear guides, precision-ground rack, and a robust frequency-driven gear motor.

Būklė: naujas, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangle 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height probe (automatic cut start detection) Automatic feed unit via ball screw spindle, incremental feed with automatic length compensation Probe on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed clamping vice opening on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cut lengths and quantities. Dsdpfxjfu Nbbs Ag Dscp Automatic feed unit 500 mm via ball screw spindle, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. Fully hydraulic control of the saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Cutting capacity at 45 degrees: round 550 mm Cutting capacity at 45 degrees: square 550 mm Cutting capacity at 45 degrees: flat 550 x 600 mm Cutting capacity at 60 degrees: round 370 mm Cutting capacity at 60 degrees: square 370 mm Dsdpfx Aefg E Hmog Dscp Cutting capacity at 60 degrees: flat 370 x 600 / 450 mm Saw blade length: 7260 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.8 t Space requirement: approx. 5.85 x 3.7 x 2.7 m 2-column double mitre bandsaw for fast cutting, equipped with pusher system P15. Option: P30. Hydraulic saw frame lowering: • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system." An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor, combined with a reliable hydraulic brake via large-radial central positioning. The worktable runs on high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control: A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. Double-sided gripping positioning system: The B&S pusher, feed, and positioning system is equipped with "double-sided opening grippers" which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is built as a separate unit and runs on ball-bearing linear guides, precision ground rack, and is driven by a frequency-controlled, robust gear motor.

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 - 100 m/min Table height: 800 mm Dcsdpfx Agofgyife Djp Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for rapid cutting, K-tech 800H with pusher system P 15. P 30 (optional) Fast, smooth, and ergonomic cutting Specially designed for cutting profiles and beams, as well as solid material. The material is clamped vertically on the feed and discharge sides. Starting from the K-tech 800H, the machine comes standard with an additional horizontal clamping vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines are equipped as standard with the environmentally friendly “B&S Clean Cut Cutting System” featuring minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC control allows the programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening grippers” which are hydraulically operated. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal shape. The pusher system is mounted separately and is guided via ball-bearing linear guides, precision-ground rack, and a robust, frequency-controlled geared motor.

Būklė: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 1250 x 600 mm Saw blade length: 8140 x 54 x 1.6 mm Band speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space required: approx. 5.7 x 4.0 x 2.75 m 2-column bandsaw for rapid cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams, as well as solid materials. Material clamping is performed vertically on the infeed and outfeed sides. From K-tech 800 H onward, the machine comes standard with an additional horizontal vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly “B&S Clean Cut Cutting System” featuring minimum quantity lubrication. Dcodpfofgyigjx Ag Dop This reduces cleaning effort and conserves resources. CNC control A CNC control allows programming up to 90 cutting programs with various cut lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening gripper jaws” that are hydraulically controlled. This ensures safe gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is designed as a separate unit and guided by precision linear ball guides, a ground rack, and a frequency-driven, robust gear motor.

Būklė: naudotas, Gamybos metai: 1986, Cutting diameter: 460 mm Saw band length: 5,334 mm Cutting width: 1.3 mm Cutting area (square): 320 x 320 mm Cutting area (flat): 500 x 320 mm Control: minipos 807 Cutting speed: 16 - 80 m/min Saw band dimensions: 5,334 x 41 x 1.3 mm Feed length: 580 mm Multiple feed length: 5,800 mm Dedpetqqrfjfx Ag Djcp Total power requirement: 8 kW Machine weight: approx. 3.5 t Machine dimensions (L x W x H): 2.7 x 2.95 x 2.15 m Accessories: roller conveyor 4,150 mm long, roller conveyor 2,150 mm long, bundle clamping device, chip conveyor, coolant system