Frezos – universalios konvencinės, X eiga 0–399 mm pirkti naudotą (62)

Gamybos metai: 1969, būklė: naudotas, mašinos/transporto priemonės numeris: 304, Manufacturer: Hermle Model: FW 800 Machine No.: 304 Year of manufacture: 1969 Weight: approx. 1000 kg Hjdpfxjdgrwdo Ai Ton General / Technical Data: Well-maintained used horizontal milling machine with hydraulic program control (cam strip) for automatic production processes. Spindle taper: SK 30 Travel paths: X 400 mm, Y 370 mm, Z 165 mm Spindle speeds: 18 mechanically switched speeds in 2 motor stages: 85, 120, 145, 180, 205, 280, 300, 400, 470, 590, 680, 840, 1000, 1210, 1420, 1780, 2030, and 3050 rpm Feeds: infinitely variable hydraulically in X and Y axes, manual in Z (horizontal milling spindle) Table dimensions (fixed table): 800 mm x 220 mm Power supply / Spindle drive power: 380 V, 50 Hz / 1.5 kW Approx. machine footprint: 1900 mm x 1100 mm x 1700 mm (L x W x H) Accessories / Special equipment: - Fixed milling table - Assorted tool holders - Chip tray - Coolant system - Machine documentation with programming instructions Remarks: The machine is in very good condition for its age. It is primarily designed for small and medium batch production. The machine features a simple hydraulic program control operated via cam switches.

Būklė: geras (naudotas), 3 vnt. Aciera frezavimo staklės parduodamos kartu už 10 500 € Taip pat parduodamos atskirai 1 nuotrauka – dažnio valdymas, kaina 4 950 € 2 nuotrauka – 3 950 € 3 nuotrauka – 3 450 € Bendra informacija Aciera F3 frezavimo staklės. Hodpfx Aeyl Rwvji Ton Automatinis išilginis padavimas (X ašis). Automatinis Z ašies padavimas (1 ir 2 nuotrauka) W20 laikiklis 400V trifazė srovė Ašių eiga: X ašis: 300 mm Y ašis: 300 mm Z ašis: 135 mm Skaitmeninis visų ašių atvaizdavimas (1 ir 2 nuotrauka)

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2, Special Coating in Light Grey with New 3-Axis Digital Readout K+C Technical Data: Hjdpfxju I Rm Nj Ai Tjn >> Machine No. 5983, Year of Manufacture approx. 1975 >> Fixed angle table (newly refurbished) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Features: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK 40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Equipment: >> 3-axis digital readout K+C, newly installed with manufacturer’s warranty. Display unit: set reference points, zero points, input of coordinates, mm/inch switching, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Operating manual for the digital readout >> Coolant unit About the Machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. The machine was completely disassembled and repainted. Oil change has been carried out. Mechanically and electrically tested. The K+C digital readout makes working easier and even more precise. You also receive a 1-year warranty on the new digital readout. Take advantage of the opportunity to view and test the Deckel under power on-site. The machine is available immediately.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Display TNC 113 Heidenhain and Infinitely Variable Feed – Excellent Condition Technical Data: >> Year of manufacture: 1990, Machine no. 2102-5046 Hodpfx Aiju Um Ers Tsn >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel range X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital readout Heidenhain TNC113 >> Central electric lubrication >> Coolant system >> Operating manual, spare parts plan Gojs3G About the machine: Offered here is a Deckel FP1 universal milling machine, year 1990, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be continuously adjusted on all three axes, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will move to automatically. The FP1 was previously used in a training facility, where it was only operated occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1983, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis K&C New Digital Readout and Infinitely Variable Feed on 3 Axes – Excellent CONDITION Technical Data: - Year of manufacture: 1983 - Machine No.: 2102-2444 Hjdpfx Aotwlwzoi Tsn - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel distances X/Y/Z: 300/160/340 mm - Vertical milling head adjustable on column by 100 mm - Vertical and horizontal quill – SK40 - Drawbar system S20x2 - Weight approx. 800 kg Accessories and Equipment: - 3-axis digital display K&C newly fitted with manufacturer’s warranty and operating instructions. Display unit: Setting reference points, zero points, input of coordinates, mm/inch conversion, absolute or incremental coordinates, circle functions, hole array, radius milling functions, etc. - Coolant system - Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, year 1983, in outstanding condition. The machine shows minimal backlash and all lead screws move smoothly. Even at maximum speeds the milling machine runs very quietly. On this newer FP1 model, the feed can be steplessly regulated on all three axes, and rapid traverse is also available on these axes. The FP1 was located in a training workshop and was only used intermittently. An oil change has been performed. The machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem under power on site.

Būklė: naujas, X-axis travel 300 mm Y-axis travel 200 mm Z-axis travel 350 mm Hsdpfx Ajfrzunji Ton Table size 700 x 200 mm Spindle taper ISO 40 Speed range - horizontal 150 - 1660 rpm Speed range - vertical 110 - 1230 rpm Quill stroke 120 mm Spindle motor 3.0 kW Machine weight approx. 1.15 t Space requirement approx. 1.31 x 1.38 x 1.65 m Ideal for training, includes the following features: • Automatic feed on all axes • Steady rest for horizontal milling • Clearly arranged control panel • Quill feed manually adjustable via handle • Hardened and ground guideways • Steady rest for horizontal milling included as standard accessory • 3-axis digital readout Scope of delivery (included in price): Chip tray, mounting arm for vertical head, coolant system.

Būklė: geras (naudotas), Travel paths 300 x 150 x 355 mm Table size 700 x 250 mm Spindle mount ISO 30 Spindle speeds 58-2000 rpm With digital readout Hodpfju Eqixsx Ai Tsn Various accessories MARCELS MASCHINEN CH

Būklė: geras (naudotas), Su skaitmeniniu ekranu Su gręžimo ir frezavimo galva Judėjimo eigą 330 x 400 x 475 mm Stalo prispaudimo plotas 650 x 245 mm Veleno laikiklis ISO 40 Veleno apsukos 63–2 800 aps./min. Hodpow Nnutsfx Ai Ten Įvairūs priedai MARCELS MASCHINEN CH

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 300 mm, padavimo eiga Y ašimi: 160 mm, padavimo ilgis Z ašis: 320 mm, bendras svoris: 860 kg, Universal Tool Milling Machine Ruhla Type 58 Thiel Duplex 58 Comparable to Deckel FP1 Compact machine with boring quill and automatic feed on all 3 axes including vice New digital readout included with 1 measuring scale Swiveling table ±0–30° Table size 715 x 260mm X-axis: 300mm Y-axis: 160mm Z-axis: 320mm Dimensions (LxWxH) approx. 110 x 110 x 170cm Inspection and testing are welcome. Hjdpfx Aiswf Agds Tjn

Būklė: geras (naudotas), A wide range of accessories, only offered as a complete package! Travel X / Y / Z: 300 / 300 / 135 mm Table size (W x D): 700 x 190 mm Spindle speed: 95 - 6000 rpm / 11 steps Tool holder: W 20 Weight: approx. 450 kg Machine dimensions (W x D x H): approx. 900 x 900 x 1500 mm Accessories: - Swivel table - Rotary table Ø 200 mm - 6 tool holders Hjdjd Erqbopfx Ai Ton - Various collets and clamping devices - Horizontal milling attachment - Work lamp - Coolant system - Machine vice

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155x110x160 cm Installed power: 2.10 kW Customs tariff code: 8459.6930 TECHNICAL SPECIFICATIONS Vertical Rectangular Table: - Usable area: 740x200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between slots: 120 mm Fixed Angle Table: - Usable area: 700x250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between slots: 40 mm - Lateral travel: 250 mm (total) Universal Tilting Table: - Usable area: 600x210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between slots: 40 mm - Lateral travel: 350 mm (total) Tilting range in three planes, each direction: 30°- 45°- 30° Spindle Internal Taper: - Horizontal spindle head: ISO 30 (40) - Vertical spindle head: ISO 30 (40) - Universal quick head: SV E20+ES20 Swivel in vertical plane: Vertical spindle head: 360° Longitudinal travel: hand/automatic: 320/300 mm Vertical travel: hand/automatic: 375/355 mm Hjdpjw Uc Npefx Ai Tjn Cross travel: adjustment handwheel: 150 mm Quill travel: 60 mm Reading accuracy at micrometric verniers: 0.02 mm Main motor, kW-rpm: 1.5/1500 Rapid feed drive motor, kW-rpm: 0.45/3000 Coolant device motor, kW-rpm: 0.15/3000 Spindle speed: - 1st range, rpm: 58-375 - 2nd range, rpm: 330-2000 Feed rates - longitudinal or vertical, mm/min: 12-400 - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (quick feed) - Longitudinal or vertical, mm/min: 1200 All technical data provided without obligation or guarantee, except for errors or omissions.

Būklė: naudotas, TECHNICAL DATA - Strokes: 320 x 150 x 375 [mm] - Distance from vertical spindle to table surface: 310 [mm] - Distance from horizontal spindle to table surface: 410 [mm] - Spindle speeds (stepwise adjustment): 58–2000 [rpm] - Spindle taper: ISO 30 - Feeds: 12–400 [mm/min] - Rapid traverse: 1200 [mm/min] - Power supply: 3 x 380 [V/50 Hz] - Motor power: 1.5 [kW] - Total installed power: 2.1 [kW] - Machine dimensions (L x W x H): 1500 x 1100 x 1600 [mm] - Machine weight: approx. 700 [kg] ACCESSORIES - Swivelling vice Hedpfx Aieuhbw Ns Ton - Coolant system