Frezos – universalios konvencinės, X eiga 0–399 mm pirkti naudotą (67)

Sąlyga: naudotas, Universal tool milling machine, milling machine MAHO type MH 400 P Machine no. 41364 Year of manufacture 1981 Control Heidenhain TNC 125 (Active Digital) Travel distances with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel distances with handwheel X: 400 mm, Y: 250 mm, Z: 375 mm Gksdpfxof A Srzo Acuoc Table size 690 x 270 mm Spindle taper ISO 40 Tool clamping hydraulic Spindle speed 40 - 2500 rpm, stepless Feed rate X and Z-axis 5 - 1000 mm/min, stepless Feed rate Y-axis 5 - 670 mm/min, stepless Rapid traverse X + Z = 1.2 m/min, Z = 0.8 m/min Quill adjustment vertical 50 mm Spindle drive 2.2 kW Power supply 380 Volt, 50 Hz - Conventional handwheels for X, Y, Z - Electrical control cabinet fixed to the machine - Coolant system integrated in the machine base - Vertical milling head with boring quill - Counter bearing for horizontal milling - Operating manual Space requirement L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg Good condition

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155x110x160 cm Installed power: 2.10 kW Customs tariff code: 8459.6930 TECHNICAL SPECIFICATIONS Vertical Rectangular Table: - Usable area: 740x200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between slots: 120 mm Fixed Angle Table: - Usable area: 700x250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between slots: 40 mm - Lateral travel: 250 mm (total) Universal Tilting Table: - Usable area: 600x210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between slots: 40 mm - Lateral travel: 350 mm (total) Tilting range in three planes, each direction: 30°- 45°- 30° Spindle Internal Taper: - Horizontal spindle head: ISO 30 (40) - Vertical spindle head: ISO 30 (40) - Universal quick head: SV E20+ES20 Swivel in vertical plane: Vertical spindle head: 360° Longitudinal travel: hand/automatic: 320/300 mm Vertical travel: hand/automatic: 375/355 mm Gedpfx Aow Uc Npocuokc Cross travel: adjustment handwheel: 150 mm Quill travel: 60 mm Reading accuracy at micrometric verniers: 0.02 mm Main motor, kW-rpm: 1.5/1500 Rapid feed drive motor, kW-rpm: 0.45/3000 Coolant device motor, kW-rpm: 0.15/3000 Spindle speed: - 1st range, rpm: 58-375 - 2nd range, rpm: 330-2000 Feed rates - longitudinal or vertical, mm/min: 12-400 - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (quick feed) - Longitudinal or vertical, mm/min: 1200 All technical data provided without obligation or guarantee, except for errors or omissions.

Sąlyga: naudotas, Gamybos metai: 1986, 3-axis milling machine X-axis travel ----- 300 mm Y-axis travel ----- 110 mm Z-axis travel ----- 210 mm Gjdpfsivg Sasx Acuekc Milling table ----- 480 x 125 mm Spindle taper ----- ISO30 Spindle speed ----- 100 - 4000 rpm Weight ----- 750 kg Dimensions ----- 1550 x 1150 x 1700 mm

Sąlyga: geras (naudotas), Gamybos metai: 1996, X-Verfahrweg: 380 mm Y-Verfahrweg: 140 mm Pinolenhub: 40 mm Tischgröße: 630 x 150 mm Spindelaufnahme (MK): 2 Gkjdpfxsua E Naj Acuoc Spannung: 380/400 V

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Parduodamas retas radinys. Būklė puiki, labai mažai naudotas, veikia nepriekaištingai. Gsdpfx Acow U Eryouskc

Gamybos metai: 1969, Sąlyga: geras (naudotas), Universal tool milling machine DECKEL Type FP 1 Machine No. 37101 Year of manufacture approx. 1969 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 1.0 and 1.5 kW, pole-changeable Gksdpfxel Dx I Ss Acuec Power supply 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - Feed in X and Z axes - Coolant system with mechanical pump integrated in machine base - Quill movement on vertical milling head 60 mm - Separate control cabinet Space requirement (L x W x H) 1000 x 900 x 1750 mm Weight 690 kg Good condition Accessories: - Collets - Rotary table - Machine vice - Tailstock for horizontal milling

Sąlyga: naudotas, Universal tool milling machine DECKEL Type FP 1 Mach. No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.6 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed selectable via 2 motor speeds and 8 gear stages - Quill movement at the vertical milling head: 60 mm - Fixed angle table Godpfxeghtvaj Acujkc - Free-standing control cabinet Space required (L x W x H): 1100 x 1100 x 1600 mm Weight: 650 kg In good condition

Sąlyga: naudotas, Gamybos metai: 1990, Year of manufacture: approx. 1990 Godpsvu Hi Aefx Acuskc Factory No.: 42965 X-axis travel: 500 mm Y-axis travel: 400 mm Quill stroke: 300 mm Weight: 3.8 t

Sąlyga: geras (naudotas), For sale: Optimum OPTImill MF 2 Vario universal milling machine from a training workshop – very well maintained with low operating hours. Manufacturer: Optimum Model: Universal Milling Machine OPTImill MF 2 Vario Year of manufacture: 2007 Condition: used, good Gsdpfx Acow A Rg Tjuskc Technical data: - Motor: 1.5 kW, 400V ~50Hz - Drilling capacity in steel (St.37): Ø 24 mm - Continuous drilling capacity in steel (St.37): Ø 20 mm - Spindle taper: ISO 40 (DIN 2080, DIN 69871) - Cutter head diameter: Ø 76 mm - End mill diameter: Ø 18 mm - Quill stroke: 127 mm - Throat: 213–533 mm - Spindle head swivel range: 45° - Gear range, variable: 10 – 5100 rpm - Spindle speed: 6 steps, adjustable speed - Automatic quill feed: 0.04 / 0.08 / 0.15 mm/rev - Table size (LxW): 1244 x 230 mm - Travel Z-axis (manual): 406 mm - Travel Y-axis (manual): 305 mm - Travel X-axis (automatic): 800 mm - Table load capacity: 230 kg - T-slot size/spacing: 16 mm / 63 mm - Distance spindle/table: 57 – 463 mm - Dimensions (L x W x H): 1400 x 1450 x 2150 mm - Total weight: 950 kg Scope of delivery: – Coolant system – Chip tray – Automatic table feed for X-axis – Operating tools – Machine vice

Sąlyga: naudotas, Macmon M100 universalioji frezavimo staklė - Pašarinio judesio diapazonas laipsniais: 9–450 mm/min - Horizontalus greitis: 40–2000 aps./min - 21 vertikaliosios verpstės sukimosi greitis: 50–2500 aps./min - Verpstės tvirtinimas: SK40 - V-verpstės išsikišimas apie 100–320 mm - Įrengimo aukštis po verpste: 350 mm - Vertikalioji galvutė, pinolės eiga: 70 mm - Vertikalioji galvutė pasukama 360º - Fiksuotas kampinis stalas: 215x600 mm - Kryžminio stalo eiga rankiniu būdu: 170 mm - Vertikaliai varikliu/rankiniu būdu: 310/340 mm - Ilginio stalo eiga varikliu/rankiniu būdu: 290/310 mm - X eiga: 310 mm - Y eiga: 340 mm - Z eiga: 170 mm - Automatinė pavara ir greitėjimo eiga visose 3 ašyse - Bendra galia: 2,5 kW - Verpstės pavara: 2,2 kW - Bendra pavara: 2,5 kW-380V-50Hz - 3 ašių skaitmeninė indikacija Matmenys: Ilgis x plotis x aukštis 1,5 x 0,7 x 1,5 m / Svoris 900 kg Gjdpfxsw Rn Ipe Acujkc

Sąlyga: visiškai atnaujintas (naudotas), Digital display: 3-axis Spindle taper: SK40 Gkjdpfxewx Nqce Acuec Spindle speed: 40–2000 rpm Travel distances: X 300 mm, Y 160 mm, Z 340 mm

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Optimum OPTImill MZ 2S Universal Milling Machine Ideal for training workshops!!! Available immediately Equipped with NEWALL DP 700 3-axis digital position display. Feed axes controlled via inverter drive and operated from the control panel. Versatile range of applications Outstanding damping properties and stability thanks to the robust machine frame All guideways are hardened, precision ground, and adjustable via tapered gibs Automatic feed on X, Y, and Z axes, infinitely adjustable via an electronic joystick on the control panel Electrical feed stop Ball screw drives on all axes Centrally arranged, clearly laid out control panel with integrated digital position and speed indicators Large, heavy-duty cross table with precise machined surface and five T-slots Coolant system Oversized handwheels with scale Machine lamp Smooth, quiet operation Manual central lubrication TECHNICAL DATA Dimensions and Weight Length (product): approx. 1239mm Width/Depth (product): approx. 1168mm Height (product): approx. 1900mm Net weight: approx. 1400kg Milling Head Milling head swivel range: ±90° Drilling/Milling Capacity Maximum face mill diameter: 100mm Drilling capacity steel (S235JR): 30mm Continuous drilling capacity steel (S235JR): 26mm Maximum shank milling cutter diameter: 25mm Electrical Data Drive motor power: 2.2kW Operating voltage: 400V Mains frequency: 50Hz Horizontal Milling Table Length: 750mm Width: 320mm Min. spindle to table distance (vertical spindle): 75mm Gksdpfx Ajuqix Uocusc Max. spindle to table distance (vertical spindle): 410mm T-slot size: 14mm Number of T-slots: 5 T-slot spacing: 63mm Min. spindle to table distance (horizontal spindle): 70mm Max. spindle to table distance (horizontal spindle): 400mm Max. load capacity: 285kg Vertical Milling Table Length: 830mm Width: 250mm T-slot size: 14mm Number of T-slots: 2 T-slot spacing: 63mm Coolant System Coolant pump power: 95W Travel X-axis manual travel: 400mm Y-axis manual travel: 200mm Z-axis manual travel: 335mm X-axis automatic travel: approx. 310mm Y-axis automatic travel: approx. 160mm Z-axis automatic travel: 295mm Vertical Spindle Vertical spindle overhang: 100mm Spindle taper: ISO 40 DIN 2080 Speed range: 50–1890 rpm Number of speed ranges: 12 steps Drawbar: M16 Quill travel: 120mm Max. spindle torque: 1100 Nm Feed Rate Feed rate (X, Y, Z axes): 10–600mm/min Electrical Connection Total connected load: 4kW Motors Rapid traverse X-axis drive motor: 0.375kW Rapid traverse Y-axis drive motor: 0.375kW Rapid traverse Z-axis drive motor: 0.375kW

Sąlyga: naudotas, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 34338 Year of manufacture: approx. 1965 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 1.0 and 1.5 kW, pole-changeable Power supply 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, Type VRZ 753 B - Spindle speed via 2 motor speeds and 6 gearbox stages - Power feed on X and Z axes - Coolant system with mechanical pump in the machine base - Quill travel on vertical milling head 60 mm - Angle table, swivelable, rotatable, and tiltable - Freestanding control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm Weight 690 kg Godpfx Aeic R I Rjcujkc Good condition

Sąlyga: naudotas, Gamybos metai: 1994, Weight per unit: 6 t Units in stock: 2 Set: yes Export only: yes Gedpfx Acou T Sfhsuskc Control system: Siemens

Sąlyga: naudotas, TECHNICAL DATA - Strokes: 320 x 150 x 375 [mm] - Distance from vertical spindle to table surface: 310 [mm] Gkjdpouhbw Nofx Acujc - Distance from horizontal spindle to table surface: 410 [mm] - Spindle speeds (stepwise adjustment): 58–2000 [rpm] - Spindle taper: ISO 30 - Feeds: 12–400 [mm/min] - Rapid traverse: 1200 [mm/min] - Power supply: 3 x 380 [V/50 Hz] - Motor power: 1.5 [kW] - Total installed power: 2.1 [kW] - Machine dimensions (L x W x H): 1500 x 1100 x 1600 [mm] - Machine weight: approx. 700 [kg] ACCESSORIES - Swivelling vice - Coolant system

Sąlyga: naudotas, Gamybos metai: 1972, X-travel 300 mm Y-travel 350 mm Z-travel 150 mm Total power requirement 2.5 kW Machine weight approx. 700 kg Space requirement approx. m M A C M O N Universal Tool Milling Machine Model ALG 100 C Year of manufacture: 1972 Serial No. 05672323 _____ Table travels: Longitudinal motor./manual 290 / 300 mm Vertical motor./manual 310 / 350 mm Cross slide travel (manual): 150 mm Fixed angle table 215 x 600 mm Swiveling vertical head 360° Vertical head quill 70 mm Distance under spindle 350 mm - Spindle overhang approx. 100 - 320 mm Spindle taper SK 40 16 spindle speeds vertical 50 - 2,500 rpm horizontal 40 - 2,000 rpm Feed range, 16 steps 9 - 450 mm/min Spindle drive 2.2 kW Total power 2.5 kW – 380 V – 50 Hz Weight 700 kg Accessories / Special Equipment • Fixed angle table approx. 215 x 600 mm, mounted • Equipped with a movable vertical milling head, ISO 40, quill travel 70 mm, • Collet chuck for milling cutters • Separate control cabinet, integrated coolant system, chip tray, various short arbors, etc. Gedpfxet Hw Ipe Acuokc Condition: good – ready for demonstration, Ideal for training workshops/education/private use Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1983, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis K&C New Digital Readout and Infinitely Variable Feed on 3 Axes – Excellent CONDITION Technical Data: - Year of manufacture: 1983 - Machine No.: 2102-2444 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel distances X/Y/Z: 300/160/340 mm - Vertical milling head adjustable on column by 100 mm - Vertical and horizontal quill – SK40 - Drawbar system S20x2 - Weight approx. 800 kg Accessories and Equipment: - 3-axis digital display K&C newly fitted with manufacturer’s warranty and operating instructions. Display unit: Setting reference points, zero points, input of coordinates, mm/inch conversion, absolute or incremental coordinates, circle functions, hole array, radius milling functions, etc. - Coolant system - Operating manual, spare parts list About the Machine: Gjdpfotwlwzox Acuskc Offered here is a Deckel FP1 universal milling machine, year 1983, in outstanding condition. The machine shows minimal backlash and all lead screws move smoothly. Even at maximum speeds the milling machine runs very quietly. On this newer FP1 model, the feed can be steplessly regulated on all three axes, and rapid traverse is also available on these axes. The FP1 was located in a training workshop and was only used intermittently. An oil change has been performed. The machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem under power on site.

Gamybos metai: 1976, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Universal tool milling machine Brand: DECKEL Model: FP 1 Year of manufacture: 1976 – workshop inspected Machine no.: 53426/08 Geometric acceptance with test report Accessories: - 3-axis digital readout Heidenhain ND 750 - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Coolant system - Bracket with counter bearing Gjdpfxeflc N Ao Acuskc - Operating manual - Used, as seen, however without warranty -

Sąlyga: naudotas, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 33064 Year of manufacture: approx. 1960, overhauled in 2012 Travel paths X: 300 mm, Y: 150 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95-1900 rpm, 12 steps Horizontal spindle speed: 60-1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Electrical connection: 380 Volt, 50 Hz - Feed on X and Y axes - Quill travel at the vertical milling head - Fixed angle table - Coolant system with mechanical pump in machine base - Separate control cabinet with cable plug connection Required space (L x W x H): 1100 x 900 x 1600 mm Gkjdpedzp T Esfx Acuoc Weight: approx. 900 kg Good condition Machine was overhauled in 2012

Sąlyga: naudotas, Gamybos metai: 1977, x-eiga 700 mm Cb-KMS Gedpfx Asqh Ehtjcuokc

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Display TNC 113 Heidenhain and Infinitely Variable Feed – Excellent Condition Technical Data: Gjdeu Um Erspfx Acuokc >> Year of manufacture: 1990, Machine no. 2102-5046 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel range X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital readout Heidenhain TNC113 >> Central electric lubrication >> Coolant system >> Operating manual, spare parts plan Gojs3G About the machine: Offered here is a Deckel FP1 universal milling machine, year 1990, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be continuously adjusted on all three axes, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will move to automatically. The FP1 was previously used in a training facility, where it was only operated occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1984 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2101-1067 Milling head type: 2171 Gedpfx Acochfyfeuskc Milling head number: 1086 with warranty Geometric acceptance with test protocol Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function on X and Z axes - Fixed table 600 x 200 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual - used, as seen -

Sąlyga: naudotas, Gamybos metai: 2007, Sūkių skaičius 8000 /min Svoris 5500 kg Pagaminimo metai 2007 Godpfewm Rqasx Acujkc Valdymas Siemens 840D Matmenys (Ilgis/Plotis/Aukštis) 3600 x 2800 x 2400 mm Eigos ilgis - x 1035 mm Eigos ilgis - y 560 mm Eigos ilgis - z 510 mm Yra daugiau nuotraukų

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2, Special Coating in Light Grey with New 3-Axis Digital Readout K+C Technical Data: >> Machine No. 5983, Year of Manufacture approx. 1975 >> Fixed angle table (newly refurbished) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Features: vertical & horizontal spindle Godpfxou I Rm Ne Acujkc >> Extendable vertical and horizontal quills – SK 40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Equipment: >> 3-axis digital readout K+C, newly installed with manufacturer’s warranty. Display unit: set reference points, zero points, input of coordinates, mm/inch switching, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Operating manual for the digital readout >> Coolant unit About the Machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. The machine was completely disassembled and repainted. Oil change has been carried out. Mechanically and electrically tested. The K+C digital readout makes working easier and even more precise. You also receive a 1-year warranty on the new digital readout. Take advantage of the opportunity to view and test the Deckel under power on-site. The machine is available immediately.

Sąlyga: naudotas, Gamybos metai: 1973, Weight 3 t Godjwzyt Tspfx Acujkc X-travel 1000 mm Machine no.: 110 Head swivelling +/- yes