Sąlyga: labai geros būklės (naudotas), Hebrock 3003 Edge Bander Well-equipped, available for inspection before purchase Pre-milling cutters Njdpfxewmc I Ds Abmedc Zero-joint AirTronic hot air system (glue-free) Glue application with roller Pneumatic pre-cut guillotine Pressure rollers Anti-adhesive fluids Precision end-trimming saw Top/bottom milling unit, R1–R2 pneumatically adjustable Corner rounding unit, pneumatically adjustable Flat scraper Max. workpiece height: 50 mm Max. edge thickness (in roll): 3 mm Feed speed: 10 m/min Power supply required: 15.8 kW Condition: very good, fully operational

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, veikimo valandos: 730 h, Edge banding machine Hebrock AKV3005DK-F with pre-milling, corner rounding, and two scraping blades. Very well-maintained machine from a small business in excellent condition. Touch-screen interface with PLC control for easy operation; up to 12 operating programs can be saved. Edge thickness (coil): approx. 0.4 - 3mm Workpiece height: approx. 8 - 53mm Feed speed: approx. 10m/min Soundproof hood Extendable workpiece support, special feature extendable up to 950mm Extraction ports: 80 + 140mm Units: Quick-change glue pot with glue outlet; two glue pots included in scope of delivery (one pot used for EVA glue and one for PUR glue), the PUR glue pot is practically as new and was purchased only for a single order. Ndedpfx Astpn Etjbmec Manual top pressure adjustment with SIKO counter Manual infeed fence adjustment with SIKO counter Manual edge thickness adjustment with SIKO counter Pre-milling with Leitz Whispercut dia cutters, still sharp Gluing unit with automatic edge feed for coil material up to 3mm Pressure zone with 4 rollers Cross-cut saw Integrated chip container for edge trimmings Combination milling unit, R2 radius, with pneumatic adjustment between thin and thick edge Corner rounding unit R2, pneumatically adjustable between thin and thick edge The contour router can also be used for shelf programs, i.e. only the straight edge is rounded, not the corners Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Hood lock CE marking Operation manual A video showing the machine in operation can be provided upon request. All indexable inserts of the milling units and scrapers have been renewed or rotated, saw blades sharpened. The machine is therefore immediately ready for use. Only the diamond pre-milling cutters (Whispercut) have not been replaced, but they are still sharp. Paintwork damage has been retouched. The Hebrock AKV series is the predecessor of the current K series. The machine has only approx. 730 operating hours (glue pot active), but the frequency inverters have only approx. 455 operating hours. The machine is in excellent condition; see original photos. Machine dimensions: approx. 5000 x 1400 x 1550mm (LxWxH) Weight: approx. 1550kg The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'more offers from this provider.'

Sąlyga: naudotas, Gamybos metai: 2011, Naudota mašina Pagaminimo metai: 2011 Įranga ir techniniai duomenys: Mašina visiškai atnaujinta ir aptarnauta Nodpfswka N Tsx Abmsdc Padavimo greitis bepakopis 10-18 m/min Valdymas Edge Control 19 su 18,5" jutikliniu spalvotu ekranu Briaunų frezavimo agregatas Briaunų padavimo sistema Klijų padavimo stotis su kasetėmis, jutikliniu purkštuku ir automatiniu klijų aukščio reguliavimu Presavimo įrenginys Nukirpimo agregatas Daugiafunkcis frezavimo agregatas Kopijuojantis frezavimo agregatas Spindulio grandiklio agregatas Paviršiaus grandiklis Poliravimo įrenginys Ruoinio storis 6–60 mm Briaunos storis 0,4–8 mm Minimali ruoinio plotis 60 mm Trumpiausias ruoinys 180 mm Matmenys: 5300x1500x1600 mm Svoris: 2200 kg Vieta: 65439 Flörsheim Prieinamumas: iš karto

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 22 000 h, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 8 000 mm, X ašies padavimo greitis: 20 m/min, bendras ilgis: 8 600 mm, ruošinio aukštis (maks.): 60 mm, bendras plotis: 1 700 mm, briaunos storis (maks.): 3 mm, bendras aukštis: 1 850 mm, bendras svoris: 4 400 kg, suslėgto oro jungtis: 7 juosta, aukščio reguliavimo tipas: elektrinis, įėjimo įtampa: 400 V, įėjimo srovė: 54 A, produkto aukštis (maks.): 60 mm, slėgis: 7 juosta, IMA ICOSTS valdymas, lietimui jautrus valdymo skydelis, briaunų sandėlis, 2 purškimo įrenginiai, preliminarus frezavimas, pašildymo zona, nupjovimo pjūklas, tiesiojo ir spindulio frezavimo agregatai, galų užapvalinimo agregatas, ciklinimo agregatas, glotninimo agregatas, poliravimo agregatas. Pramoninis įrenginys labai geros techninės būklės, nuolat palaikomas operacinis paruoštumas. Naudotas tik vienoje pamainoje. Įrenginys naudotas tik kaip pagalbinė stotis padidėjus užsakymų apimtims. Nodjxctwrjpfx Abmodc Susidomėjusiems galiu atsiųsti veikiančios mašinos vaizdo įrašą ir daugiau nuotraukų.

Sąlyga: naudotas, Holz Her STREAMER 1057 XL FÜ + PU\nKraštų storis 0,4–6 mm\nŠiuolaikinė valdymo sistema su pasirinkimo jungikliu agregatų nustatymui\nKraštų podavimas visiškai automatiškas, tiek ruloninei, tiek juostinei medžiagai\nKlijų uždėjimo stotis GLU-JET su patronais ir PU klijavimu\nKlijų padavimas purkštukų technologija\nZondinė purkštukas\nRuošinio aukštis 6–60 mm\nAutomatinis klijų sluoksnio reguliavimas\nAukštos kokybės trijų volų spaudimo mazgas, pirmasis volas varomas mechaniniu būdu\nKapavimo agregatas, pneumatinis, ruloninei ir juostinei medžiagai iki 6 mm krašto storio\nSu pneumatiniu reguliavimu nuo 0-10° kapavimo pjūklams\nFrezavimo agregatas, lygiagrečiam frezavimui iki 6 mm, spindulio ir kampinio frezavimo iki 15°\nKampo kopijavimo agregatas – 3 mm krašto storis\nGrandiklio agregatas kampams ir spinduliui su dviem grandiklių laikikliais\nPaviršiaus grandiklio agregatas – apdailai\nPoliravimo agregatas\nPurkštuvų sistema įėjimo/išėjimo zonose ir PU\nĮrenginys su visais apdirbimo įrankiais\nMašina PATIKRINTA DIRBTUVĖSE\nPirmas pristatymas 2016 m.\nIš sandėlio Lieboch Nedpfx Aboxg Ixromedc

Sąlyga: naudotas, Edge thickness: 0.4 – 5.0 mm Workpiece thickness: 10 – 50 mm Total length: 4000 mm Feed speed: 11 m/min Bimatic Edge Banding Machine Model: Prima 7.5 Two --- Manufacturer’s Description: Technical Specifications: - Edge thickness: 0.4 – 5 mm - Minimum panel width (without corner rounding unit): 80 mm - Minimum panel width (with corner rounding unit): 130 mm Ndsdpfxowgwl De Abmoc - Minimum panel length (without corner rounding unit): 100 mm - Minimum panel length (with corner rounding unit): 300 mm - Minimum panel thickness: 10 mm - Maximum panel thickness: 50 mm - Feed speed: 11 m/min - Extraction connection: 3 x 150 mm - Power supply: 9 kW – 400 V / Compressed air: 6 bar Units: - Jointing unit incl. AIGNER diamond jointer heads, with DIA quick-change knife system Konstantin and controlled edge air blast nozzle behind the 2nd jointer head. - Cross-cut saw unit with extraction system, including two pneumatically tiltable saw blades, adjustable and programmable from the control panel. - Multi-radius milling unit with four positioning motors, adjustable and programmable from the control panel. Includes diamond cutter with radius 1 mm and radius 2 mm. - Corner rounding unit (copy milling unit) with infeed function and pneumatic two-position revolver, adjustable and programmable from the control panel. The complete unit can be pneumatically engaged/disengaged from the control panel. Includes one quick-change motor with R=1 mm and one quick-change motor with R=2 mm. - Multi-radius scraper unit radius 1 mm and radius 2 mm with pneumatic four-position revolver. Unit can also be pneumatically engaged/disengaged. Includes extraction system with chip collection box for scraper waste. - Flat scraper unit with four-use scraper knives. Complete unit can be pneumatically engaged/disengaged. Residual glue is extracted. - Buffing unit with two diagonally arranged ORIGINAL Riepe cloth-sisal-lamella wheels for cleaning and polishing. General Equipment: - 90° infeed guide - Telescopic extension with double support - Motorized adjustable infeed fence (jointing thickness adjustment), adjustable and programmable from the control panel - Motorized adjustable top pressure beam, adjustable and programmable from the control panel - Motorized adjustable pressure zone, adjustable and programmable from the control panel - 5 mm version: quick-change motors with reversible plate flush milling cutter, exchangeable for milling motors with radius cutters - High-gloss package: roller scanning for radius milling, radius scraping, and flat scraping units - Large transparent noise and protective hood for all units and the glue pot - Interior lighting - Operator panel with 15" touchscreen and intuitive user guidance - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece gap control - Teflon-coated glue pot with quick-change system and energy-saving standby mode - Glue roller with feed screw for long and tall workpieces (especially for PUR adhesive) - Additional quick-change glue pot - Pressure zone with three pressure rollers, the first of which is motor-driven - Heavy-duty roller guillotine for edges 54 x 3 mm - Original RIEPE spray system - Before the jointing unit: LPZ II separating agent - Before the saw unit: LP 289/99 coolant and antistatic agent - ...

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, maks. briaunos storis: 3 mm ruloninė / 8 mm juostinė medžiaga Rulonų pjovimo agregatas Nupjovimo pjūklas Kraštų frezavimo agregatas, kombinuotas frezavimas Matmenys: apie 3300 x 1400 x 1300 mm (IxPxA) Ndsdpfx Ajxpu N Nebmoc Svoris: apie 550 kg

Sąlyga: geras (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 020313L, slėgis: 7 juosta, Description: Rigid steel construction for high machine stability. Workpieces are conveyed on a sliding transport chain with plastic plates. Top pressure is equipped with two rows of rubber-coated rollers. Manual adjustment of top pressure, with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and the glue pot. Glue pot with standby temperature function. Start/stop function for all motors. End trimming unit for 3 mm edge banding rolls. Support plate for roll material up to 800 mm diameter. Centralized dust extraction. Roller track as workpiece support along the entire machine. Protective cover over all processing units. Control panel including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Joint-milling unit before the gluing station, for preparing the workpiece edge for glue application. With adjustable fence at the infeed. Max. material removal 2 mm. 2 motors, each 1.1 kW, 12,000 rpm, max. material removal 2 mm, extraction diameter 120 mm, incl. 2 WIDIA cutting tools. Gluing station for hot-melt adhesive with rapid heating and glue application roller. System for temperature control and recycling of surplus hot-melt adhesive. Power consumption 3.5 kW, capacity 1.5 kg. Heating time approx. 15 min., depending on ambient temperature and type of adhesive. End Trimming Unit With 1 saw blade for trimming the front and rear edge overhang at 90°, flush with the workpiece. If required, trimming for front and rear overhangs can be triggered individually. Motor: 0.35 kW Saw blade speed: 12,000 rpm. Flush Trimming Unit With 2 motors for milling a radius or chamfer on top, bottom, and/or the front edge. Vertical and horizontal motor adjustment on hardened steel guide rails with ball bearings. Three manually adjustable positions for different edge thicknesses. Motor is not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, each 0.55 kW, 12,000 rpm. Diamond tools: 68 mm Z6, R=2. Profile Scraper With 0.22 kW, 12,000 rpm, prismatic linear guide. Max. panel thickness 50 mm. Max. edge material thickness 2 mm. Profile Scraper Knife Flat scraper knife Buffing unit Technical Data: Edge strip thickness (manual feed) max.: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edges: 65 mm Max. ABS edge height: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Nedpjxn Hzbefx Abmedc Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210°C Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction connection diameter: 2 x 60 mm CE standard

Sąlyga: naudotas, Gamybos metai: 2013, Used machine Year of manufacture: 2013 Ndedpjwka Iijfx Abmjc Machine number: 133 The machine has been completely overhauled New Glue Jet 301 glue application system (upper part 1 mm) All units checked All cutters sharpened All knives replaced - Electrical equipment for infinitely variable feed, 400 V / 50 Hz, 2.2 kW - Motorized pressure beam adjustment - Automatic chain lubrication - PPC 315 control system with 15" touchscreen - ECO MODE energy-saving mode - Infeed fence 1350 mm, motorized adjustment - Jointing milling unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with two milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing milling unit 1801 / 1802 - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing milling unit 1801 / 1802 - Fully automatic edge feed 1901 - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - Granulate hopper - Pressure unit 1913 MOT - Pneumatic trim saw unit 1918 (60 mm) - Multi-function milling unit 1826 MOT4 (2 x 0.65 kW) - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation - Profile milling unit 1833 MOT4 - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT2 - Carbide reversible knives for scraper holder R = 2.5 mm (2 pcs required) - Surface scraper 1964 - Polishing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: Hochheim

Gamybos metai: 1994, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Sofort verfügbar! Nodpfx Ajiffpmebmodc

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Edgebanding Machine Hebrock F 4 with Jointing, Corner Copying, and Two Scrapers. Very well-maintained machine from a small business, in excellent condition. Color touch-screen interface with PLC control for easy operation of the machine, allowing storage of 10 operating programs. Edge thickness roll: approx. 0.4 – 2 mm Workpiece height: approx. 10 – 40 mm Feed rate: approx. 7 m/min Noise protection hood Extendable workpiece support Extraction connection: 1 x 140 mm Units: Top pressure, manual adjustment with SIKO counter Infeed fence, manual adjustment with SIKO counter Edge thickness, manual adjustment with SIKO counter Jointing with diamond cutters, cutters resharpened Gluing unit with automatic edge feed for roll material up to 2 mm Glue pot with quick color change device Pressure zone with 3 rollers Cut-off saw Combination milling unit, R2, with pneumatic adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Corner rounding unit R2, pneumatically adjustable between thin and thick edge The profile milling unit can also be used for shelf programs; i.e., only the straight edge is rounded, not the corners Glue joint scraper, pneumatically retractable Hood lock CE marking Operating manual A video of the machine in operation can be sent on request. Ndodpfsw Sn I Esx Abmjc All reversible knives of the milling units and scrapers have been replaced or rotated, saws have been resharpened. The machine is therefore immediately ready for use. The diamond jointing cutters have also been sharpened. Paintwork damage has been repaired. The machine has approx. 335 operating hours and has processed approx. 20,700 linear meters of edge material. The machine is in very good condition, see original photos. Machine dimensions: approx. 4050 x 1100 x 1400 mm (LxWxH) Weight: approx. 800 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "further offers from this seller."

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10/3201, Siūlome gerai prižiūrėtą Hebrock SBM 10. Tikra retenybė. Karštų klijų dengimo įrenginys standartinėms briaunų medžiagoms dengti ir efektyviam lukšto juostelių atlieku panaudojimui. Ndodpfx Absxmbkhsmoc

Sąlyga: naudotas, Gamybos metai: 2001, bendras ilgis: 5 650 mm, bendras aukštis: 1 750 mm, bendras plotis: 1 100 mm, Kaina: pagal užklausą - Pagaminimo metai: 2001 - Dokumentacija prieinama: Ne - Serijos numeris: 468/0-103 Ndjdpfexlqpdsx Abmsc - Transportavimo matmenys: 5650 mm x 1100 mm x 1750 mm (i x p x a) - Transporto pakuočių skaičius [vnt]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas mainais bet kada galimi bet kokiai pramoninei įrangai Yorick Diebels

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 759 h, Edge banding machine Akron 1130 J Year of manufacture: 2020, recently serviced - 7.1 kW, 7 bar - Edgeband thickness: max. 5 mm Nedpfswzycnox Abmjdc - Panel thickness: max. 50 mm - Roll material thickness: max. 3 mm - Workpiece length: min. 150 mm; Workpiece width: min. 85 mm - Feed rate: max. 9 m/min - Glue system: granulate, glue pot below; BIESSE glue system SP 01, quick-change glue pot - Strip magazine, spraying unit - With BIESSE jointing unit RT 01 - Preheating zone, cross-cut saw unit: 1 motor, BIESSE cross-cut saw unit IT 01 - Flush/Radius/Chamfer stations: 1 BIESSE fine trimming unit RF 01 - Corner rounding unit: 1 motor, BIESSE corner copying unit AR 01 - Scraper unit: profile scraper, flat scraper - Buffing unit - Nesting equipment: flush/radius/chamfer stations, profile scraper - Version: left-hand machine - Machine length: 4,215 mm; weight: 1,000 kg - Total operating hours: 759.48 h; total operating meters: 46,284 m MACHINE AVAILABLE APPROX. FROM CALENDAR WEEK 42/2025!!

Sąlyga: naudotas, Gamybos metai: 2020, Used machine Year of manufacture: 2020 Features and technical data: Processing dimensions Workpiece thickness: 8–60 mm Workpiece width: from 70 mm Edge height: up to 8 mm Edge thickness (coil material): up to 3 mm Feed Speed adjustable from 8 to 14 m/min, infinitely variable Gluing technology Glue system for granulate Glue pot positioned above feed Interchangeable HOMAG QA 65 N glue pot Designed for EVA and PUR processing Quick-change function Units Jointing unit Preheating zone Pressure station, NC-controlled Front and rear trimming with two motors Station for flush, radius, and chamfer processing Corner copying unit with two motors Scraper units: profile and flat scraper Buffing unit Additional and operating equipment Integrated spray system Air cushion table for workpiece support PU pressure rollers Mechanical infeed barrier HOMAG powerTouch control interface Right-hand machine version CE-compliant Nsdpfexizuljx Abmedc Dimensions: approx. 6,060 x 950 x 1,150 mm Weight: approx. 2,200 kg Availability: approx. December 2025 Location: NRW

Sąlyga: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Manuelles Vorschubsystem Vorbereitungs-/Kalibriereinheit Leim- und Kantenanleimeinheit Endabschneideeinheit Njdpfewu Rv Ssx Abmodc Längsfräseinheit Eckenabrundungseinheit Kantenschabeinheit Kantenschleifeinheit Leimschabeinheit Kantenbürsten

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Edge banding machine for edging and post-processing of panel materials Edge thickness for rolls: 0.4 - 3 mm Edge thickness for strips: 8 mm Maximum 15 mm possible with tool change at the milling unit 1826 Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: stepless, 10 - 20 m/min PPC 221 control – with 8.4" VGA color display Motorized adjustment of the infeed fence, adjustable via control system Pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) Edge feeder 1901 SYNCHRO Automatic transport of roll and strip materials Gluing system Glu Jet GJ301 automatic Automatic adjustment of glue height (contact nozzle) Glu Jet hybrid technology – processing of EVA and PUR adhesives Adhesive application via nozzle technology Heating time: 3 minutes Adhesive granulate container 5 kg for GJ301 PRESSURE UNIT – pressure section 1914-1 MOT END TRIMMING UNIT – end trimming unit KA 701 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) Pneumatic pivot function 0/10° for coils and strips MULTIFUNCTION END TRIMMING UNIT End trimming unit 1826 MOT4 (2 x 0.65 kW) with 4 NC servo drives for flush, radius, and bevel cuts CORNER COPYING UNIT Shaping unit 1833 MOT4 (2 x 0.65 kW, 200 Hz, 12,000 rpm) Milling of the upper and lower longitudinal edge, copy-milling of front upper and lower longitudinal edge as well as rear longitudinal edge, corner copying, remachining of corners with 4 adjustment motors SCRAPING UNIT 1927 MOT5 HM reversible knives for scraper knife 1929 R = 2.0 mm (2 pieces required) FLAT SCRAPER 1964 For removing excess glue for a clean glue joint BUFFING UNIT 1944K (2 x 0.2 kW, 400 V, 1,400 rpm) For edge cleaning and polishing, including plunge control, with 2 textile buffing wheels Ndjdpoxggmbefx Abmsc GROOVING UNIT 1841 1 x 3.8 kW, 200 Hz, 12,000 rpm, Saw blade Ø 160 mm, Cutting width 4–9 mm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, briaunos storis (maks.): 20 mm, valdiklio modelis: IMATRONIC 121/01, TECHNINĖS DETALĖS Nsdsxf Ewvjpfx Abmedc Krašto storis (ritinys): 0,3–3 mm Krašto storis (juostelės/kūneliai): 0,8–20 mm Plokštės storis: 8–60 mm Varikliu varomas grandininis padavimo mechanizmas iš apačios (kintamas): 6–30 m/min ĮRENGINIO DETALĖS Elektroninis valdymas: IMATRONIC 121/01 ĮRANGA Tiesinimo agregatas su NC reguliavimu 08.376: (4,5 kW × 2, 9 000 aps./min) Krašto kaitinimo lempos: 1,5 kW × 2 Klijų įrenginys 283.1513: (karšti klijai + pašildytuvas) su NC reguliavimu Klijų įrenginys 08.42: (0,66 kW × 2, 12 000 aps./min) Profiliavimo grupė 08.0555: (1,85 kW × 2, 12 000 aps./min) Daugiafunkcis įrenginys 08.348: (0,66 kW × 2, 12 000 aps./min) Kopijuojantis freza 08.519 Klijų nubraukimo grupė 08.50 Šepetėlių įrenginys 08.612: (0,25 kW × 2, 1 500 aps./min) Agregatas 08.181: (4,4 kW × 1, 6 000 aps./min) Juostinio šlifavimo įrenginys 08.062: (1,8 kW × 1, 3 000 aps./min) Viršutinė spaudimo sistema su motorizuota gumine juosta Įleidimo ribotuvas su NC reguliavimu Spaudimo zona Ritės laikiklis su 1 rite Automatinis kopijuojančių frezų keitimas (skersinis sistema)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Briaunų klijavimo staklės Gamintojas: Brandt Tipas: KDF 220 Highflex 1220 Pagaminimo metai: 2013 Briaunos storis: 0,4 - 3 mm Ruoinio storis: 8 - 50 mm Njdpjw N Sb Rsfx Abmsdc Bendras ilgis: apie 4 150 mm Pado greitis: 10 m/min Bendra galia: 9,5 kW Svoris: apie 1 150 kg Sujungimo agregatas: Taip Nupjovimo agregatas: Taip Lygiavimo frezos agregatas: Taip Kampų kopijavimo agregatas: Taip Spindulio grandiklis: Taip Paviršiaus grandiklis: Taip

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, The HOMAG Optimat KAL 210/6/A20/S2 is a single-sided automatic edge banding and post-processing machine engineered for maximum precision and efficiency in panel machining. It is ideal for industrial applications and professional joinery workshops. This machine enables joint trimming of straight panel edges as well as edge banding and finishing of various edge materials (roll and strip stock) up to 20 mm edge thickness, both in longitudinal and cross feed. Technical Data Feed speed: 18 – 25 m/min Working height: 950 mm Workpiece thickness: 12 – 40 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): up to 20 mm Pneumatic connection: 7–8 bar Operating voltage: 400 V, 50/60 Hz Equipment Power Control PC22 control unit (Windows-based) Release agent spraying device top/bottom Joint trimming unit with 2 motors, each 3 kW Edging unit A20 for roll and strip material Pressure zone: 1 powered pre-press roller, 6 post-press rollers Njdpfx Abjxnpx Asmjdc End trimming unit HL84 Pre-milling unit 1.5 kW Contour milling unit FK11 Profile scraping unit PN10 and finishing unit Automation package bevel/radius with pneumatic adjustment Sound insulation enclosure and individual extraction Control & Software Menu-driven operation via 17" TFT display woodCommander software package for program management Network and remote maintenance capability Features CE compliant according to EC Machinery Directive High-quality build, robust construction

Sąlyga: naudotas, Gamybos metai: 1989, Naudota mašina Pagaminimo metai: 1989 Būklė: Patikrintas funkcionalumas Įranga ir techniniai duomenys: Maks. briaunos storis: 20 mm Maks. briaunos aukštis: 51 mm Maks. ritininės medžiagos storis: 3 mm Mažiausias ruošinio ilgis: 140 mm Mažiausias ruošinio plotis: 60 mm Klijų sistema: 1906 kasetė Spaudimo įrenginys Frezuotojo mazgas 1920 - briaunų ir nuožulnių frezavimas iki 20 mm Užimamas plotas (I x P x A): 3150x1800x1375 mm Svoris apie: 800 kg Vieta: Flörsheim Ndedpfx Abew I U E Ajmjc Prieinamumas: Trumpas terminas

Sąlyga: geras (naudotas), Kodas: 0680 Gamintojas: BIESSE Modelis: AKRON 430/AT – CE Standartas Automatinė briaunų klijavimo staklė su šlifavimo agregatu, skirta masyvo, drožlių plokščių, faneruotų, PVC, ABS ir melamino plokščių briaunų klijavimui – CE Standartas – 2009 gamybos metai Techniniai duomenys: Plokštės aukštis: 10–60 mm Briaunos storis maks.: 10 mm Plokštės ilgis min.: 140 mm Plokštės plotis min.: 85 mm Transportavimo juostos greitis: 12 m/min Elektroninis valdymo pultas su USB jungtimi duomenų įkėlimui – Sintra programinė įranga Šlifavimo agregatas plokščių šlifavimui – 2 varikliai po 2,4 AG, 12 000 aps./min. Įrankių skersmuo: 80 mm F30, aukštis 75 mm Kopijavimo šliaužikliai 2 ištraukimo jungtys, skersmuo 60 mm Klijavimo agregatas Keičiamas klijų indas Klijų indo talpa: 2 kg Klijų dengimo volo skersmuo: 25 mm Didelio volo spaudimo konvejeris, volo skersmuo 100 mm Mažo volo spaudimo konvejeris, volų skersmuo 80 mm Pjovimo agregatas: priekinių ir galinių briaunų išsikišimų nupjovimui 2 varikliai po 1,07 AG, 12 000 aps./min. Variklio pasvirimas: 0–15 laipsnių Didžiausias įrankio dydis: 140 mm Kopijavimo šliaužikliai 2 ištraukimo jungtys, skersmuo 80 mm Apvalinimo šlifavimo agregatas, skirtas per viršutinį ir apatinį plokštės kampą likusios briaunos nuolydžiui 2 varikliai po 0,87 AG, 12 000 aps./min. Variklio pasvirimas: 0–25 laipsnių Įrankio skersmuo: 70 mm F16, aukštis 20 mm Vertikalūs ir priekiniai kopijavimo įtaisai su besisukančiais diskais Aukščio reguliavimas: automatinis su viršutiniu spaudimo bloku 2 ištraukimo jungtys, skersmuo 80 mm Briaunos grandiklio agregatas, skirtas ABS briaunų apdailai Radialinės lėkštės įrankis Nodpfx Aoxn Nwrebmsdc Vertikalūs ir priekiniai kopijavimo įtaisai su besisukančiais diskais 2 ištraukimo jungtys, skersmuo 60 mm Klijų grandiklio agregatas, skirtas klijų likučių pašalinimui Vertikalūs kopijavimo įtaisai su besisukančiais diskais 2 ištraukimo jungtys, skersmuo 60 mm Nuimama plokštės atraminė lenta 5 ištraukimo jungtys, skersmuo 100 mm Suspausto oro padavimo juosta: 7 Bendri matmenys: 3900 x 1000 x 1600 mm (aukštis) Svoris: 1530 kg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3074, Y ašies padavimo greitis: 10 m/min, bendras ilgis: 4 984 mm, ruošinio aukštis (maks.): 60 mm, bendras plotis: 1 425 mm, briaunos storis (maks.): 3 mm, bendras aukštis: 1 618 mm, bendras svoris: 1 400 kg, įvesties srovės tipas: trifazis, aukščio reguliavimo tipas: mechaninis, įėjimo įtampa: 400 V, ekstrakcijos antgalio skersmuo: 140 mm, darbinio aukščio: 888 mm, įėjimo srovė: 32 A, įėjimo dažnis: 50 Hz, ištraukimo jungties skersmuo: 140 mm, paskutinio kapitalinio remonto metai: 2025, Due to the procurement of a new machine, we are selling our reliable edge banding machine, purchased new in 2016. The machine was operated in an 8-person joinery workshop. A complete overhaul was performed in January 2025, including new radius scrapers, new milling tools, and new polishing wheels. The pre-milling unit was re-sharpened. The coupling of the glue roller shaft was replaced. The glue tank underwent thorough refurbishment and cleaning. The machine is suitable for EVA granulate (e.g., Henkel Dorus KS351) and PUR gluing as well. The degree of pre-milling, edge band thickness, and the position of the lower and upper milling tools can all be conveniently adjusted by handwheels located outside the machine housing. The control system allows you to save custom edge banding programs. For 0.4 and 2.0 mm edge banding, the machine automatically switches pneumatically from the control panel. Main specifications: - Power rating: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100-150 l/min) - Touchscreen - Programmable/saved edge banding operations - Feed speed: 10 m/min - Edge material thickness in coil: 0.5-3.0 mm - Workpiece thickness: 8-60 mm (edge banding possible on 60 mm thick material) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Machining units: - Diamond pre-milling unit (12,000 rpm) - Separator fluid tank/sprayer - Gluing unit Ndedpfx Aoxlr S Hebmsc - End trimming saw - R2 milling unit - R2 radius scraper - Corner rounding unit - Cleaning fluid tank/sprayer - Flat scraper - Polishing wheel The price of the machine does not include VAT.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Vienpusė briaunų klijavimo staklės Njdpfjxl Ufvjx Abmodc Gamintojas: Brandt Modelis: KDF 660 Pagaminimo metai: 2005 Maks. briaunos storis: apie 12 mm Maks. ruošinio storis: 60 mm Maks. ritininės medžiagos storis: 3 mm Įrengta su: - Jungimo frezeris - Ritinių žurnalas - Klijavimo agregatas - Kapavimo agregatas - Lygūs/radieuso frezavimo agregatai viršuje/apačioje - Radieuso frezavimo agregatai viršuje/apačioje su priekinio/galinio krašto kopijavimu - Radieuso grandiklis - Poliravimo agregatas Maks. padavimo greitis apie 16 m/min Jungtis: 400 V, 50 Hz, 3 fazės Bendra prijungta galia: apie 15 kW

Sąlyga: naudotas, used machine Nsdpswwxykefx Abmodc