Widos pirkti naudotą (2 030)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
Mažas skelbimas
Wülfrath
1 201 km
Mobilioji smulkinimo įranga
DoppstadtAK 565
Skambinti
Sąlyga: naudotas, Gamybos metai: 2022, veikimo valandos: 4 240 h, Funkcionalumas: visiškai funkcionalus, Basic Package AK565:
Centrally mounted axle trailer chassis with 2 axles, 80 km/h road approval
Braking system incl. ABS and lighting according to EU directive
50 mm EU towing eye including drawbar foot
Tyres: 385/65 R22.5
Hydraulically adjustable support leg
Splash guards (internal and side-mounted mudguards)
Permissible gross weight: 19,000 kg
MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard
Exhaust routed upwards
Load-dependent feed control incl. automatic scraper floor reversal
Fuel tank: 450 liters
Infeed roller: Length 1,690 mm, diameter 510 mm, with bolt-on tooth segments
Four-row flail drum with 36 free-swinging spheroidal cast iron flail holders and interchangeable double-lock flail tips
Standard: “Streusel plus” flail tip
Centrally positioned wear rails
Electric pump for actuating cylinder functions (e.g. raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing drive) when the engine is off
24V electrical control system
Separate control panel at the rear of the machine
Hydraulically folding fine shredding basket “Multimesh” (mesh size 30–280 mm, gradation on request) incl. one-piece rear flap
Scraper floor with 32 slats
Chain drive for infeed roller and scraper floor
Complete radio remote control
Drive system pre-equipment
Rear discharge belt 4 m, 1,800 mm wide (“classic”)
Anti-magnetic center section on rear belt
Reinforcement plates on the hopper side walls (material: Hardox) on both sides
Fire extinguisher
Audible start-up warning
Doppstadt telematics system
Painting: RAL2011 deep orange
Optional Equipment:
Hydraulic drive system
600 l fuel tank
Cpedpfx Asyhckmof Tju
Flail tip C1 “Bear Paw” with carbide
Rear discharge belt 4 m, belt width 1,800 mm, lowerable
Neodymium magnetic roller incl. chute
Separate drive of infeed roller and scraper floor (“Twin Drive”)
Duomatic coupling
Smooth impact plate
Fine shredding basket
Delivery date by arrangement
Mažas skelbimas
Butzbach
1 147 km
Standartinis vilkikas
Mercedes-Benz Arocs 33516x6/Palfinger Epolsion S260/Langholz
Skambinti
Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 75 152 km, galia: 375 kW (509,86 AG), pirmoji registracija: 12/2021, kuro tipas: dyzelinas, tuščias svoris: 16 350 kg, didžiausias leistinas svoris: 9 650 kg, bendras svoris: 26 000 kg, ašių konfigūracija: 6x6, kuras: dyzelinas, stabdžiai: retarderis, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, krovinio erdvės tūris: 12 809 m³, Gamybos metai: 2021, veikimo valandos: 2 684 h, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), kranas, navigacijos sistema, oro kondicionavimas, retarderis, Mercedes Benz Arocs 3351/6x6/Palfinger Epolsion S260/Timber Transport
• Manufacturer: Mercedes Benz
• Model: Arocs 3351
• Mileage: 75,152 km
• First registration: 2021
• Power: 375 kW / 509 hp
• Drive configuration: 6x6
• All-wheel drive
• Refueling system
• Retarder/Intarder, 3-stage
• Wide-angle mirrors
• Palfinger Epolsion S2602 crane
• Crane hours: 2,684 h
• Grapple: Palfinger FG57X
• Fifth wheel: Jost JSK37C
• Differential lock, 3-stage
• Transmission: Automatic
• Navigation system
• Air conditioning
• Power inverter
• Long-haul cab
• Auxiliary heating
• Radio
• Suspension: leaf-air
• Curb weight: 16,350 kg
• Payload: 9,650 kg
• Gross vehicle weight: 26,000 kg
• Emission standard: Euro 6
• German vehicle
• German documents
• Immediately ready for operation
Cpedewxdl Uopfx Af Tou
• This offer is non-binding and subject to change without notice.
- Subject to prior sale,
- Errors and/or typographical mistakes excepted.
- Sale in accordance with our Terms and Conditions.
Mažas skelbimas
Trittau
890 km
Plati juostinis šlifuoklis
VietSV3-4.3 RVXR
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 350 mm, Wide Belt Sander for Woodworking
Manufacturer: Viet Type: SV3-4.3 RVXR
Year: 2020
Technical Data
Manufacturer: Viet Italia S.r.l.
Model: SV3-4.3 RVXR
Year of manufacture: 2020
Belt width: 1350 mm
Working height: 160 mm
Machine with head adjustment (fixed working height 900 mm)
Feed speed: 1.1 kW (1.5 HP)
Speed: 0.5-7 m/min
Calibrating/sanding unit sanding roller: 190 mm diameter
Belt length: 2620 mm
Dimensions: approx. W 2.2 x D 3.5 x H 2.5 m (plus extraction unit)
Weight: 6.5 t (plus extraction unit)
Equipment
– Machine with movable head
– Sanding belt change on the left side of the machine
– Tool set
– Digital thickness display
– Overload indicator for excessive material at entry
– Electropneumatic oscillation control
– Air filter with condensate separator and automatic drain
– Maintenance-free pneumatic system
– Pneumatic lifting and lowering for on/off switching of the units
– Machine with head adjustment (fixed working height 900 mm)
– Lifting system with 4 columns (spindle) with chain drive
– Table extension at front and rear, each with 1 roller
– Industry 4.0 (LAN) package with network connection
– Centesimal lifting system with inverter
– Electromechanical grit-setting
Csdpfx Afjya Eyhe Tspu
– Frequency inverter for variable sanding belt speed
– V-Spin unit with 15-disc sanding system, diameter 80 mm
The V-Spin unit consists of 15 disc brushes arranged in a row and rotating in opposite directions. The combination of these movements makes the V-Spin unit ideal for rounding sharp edges and removing slag or oxides.
– 16 support pads for V-Spin units, diameter 80, Scotch-Brite + abrasive grit size 80
– 16 support pads for V-Spin units, diameter 80, Tampico + abrasive grit size 80
– X-Spin unit / sanding system with 15 discs, diameter 123 mm
Group consists of 5 rotating heads, each equipped with 3 pads of rotating sanding brushes, diameter 123 mm.
– Oscillating Scotch-Brite brush
– Linear cleaning systems
– Conveyor belt
HYPALON rubber conveyor belt, heat-resistant and oil-resistant, hardness 60 SH, smooth surface
– Belt cleaning blower for the conveyor mat, including suction
– IPC MONITOR 15” touch-screen control panel for operating the machine, up to max. 10 processing units
- 2 Euro pallets of new sanding belts
- Technical documentation including operating manual
The control unit manages the following processes:
– Start sequence of the selected drive motors
– Storage for 1,000 processing programs
– Automatic positioning of the thickness controller
– Acoustic and optical signal at machine startup
– Operating hours counter
– Automatic control of feed speed depending on working performance (specified in sqm). This statistical feature enhances the service life of the sanding belt.
Extraction System
- Manufacturer: Ringler, Kärcher Group
- Model: RE 36/110 D11 IE3
- Power: 11.0 kW
- 2930 rpm
- Connection: 400 V / 19.54 A / 50 Hz
- Year: Dec. 2018
- Weight: 754 kg
All information is supplied without liability.
Demonstration is possible at any time in our showroom.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Vokietija
999 km
Kompiliavimas
HorizonAC 6000
Skambinti
Sąlyga: naudotas, This is a Horizon AC 6000, a highly advanced machine for efficient paper handling and stacking. Manufactured by Horizon, this model bears serial number 26027 and features a maximum paper size of 318 x 470 mm. The machine is currently in stock and located in Germany.
Cpedowxm Rgjpfx Af Tju
The AC 6000 is equipped with six bins with suction feed, allowing it to process multiple stacks simultaneously. A cross-stacking unit further increases flexibility in paper output. The device can handle paper sizes from a minimum of 148 x 210 mm to a maximum of 318 x 470 mm, making it suitable for a wide range of paper formats. With a maximum operating speed of 2,400 sheets per hour, this device is designed for high productivity. Overall machine dimensions are 1,650 x 650 x 1,650 mm, making it a valuable and efficient addition to any production line focused on paper handling and stacking.
Specifications:
- 6 bins, suction feed
- Criss-cross stacker and jogger delivery
- Maximum size: 318 x 470 mm, minimum size: 148 x 210 mm
- Maximum speed: 2,400 sheets/h
- Dimensions: 1,650 x 650 x 1,650 mm
Mažas skelbimas
Wasbek
907 km
Dirbtuvinis presas - KNWP H 100
KnuthKNWP H 100
Skambinti
Sąlyga: naujas, The KNWP H 100 is a motorized workshop press in the workshop press category, distinguished by its precise and robust design. This hydraulic workshop press features a torsion-resistant, welded frame made of thick-walled profile steel and has been specifically developed for professional applications. The adjustable open support table enables easy pressing in and out of bearings, as well as a wide range of assembly and repair tasks. With a pressing force of 100 t and a stroke of 400 mm, axles, beams, and shafts can be straightened effortlessly. The motorized hydraulic unit ensures efficient workflows. High-quality components guarantee reliable operation even under demanding conditions. Whether for technical workshops or maintenance departments, the KNWP H 100 is the ideal tool. Order your motorized workshop press now and benefit from its performance.
Cpodpfouyh A Esx Af Tju
Mažas skelbimas
Wasbek
907 km
Stulpinio tipo gręžimo staklės - SSB 50 F Super VT
KnuthSSB 50 F Super VT
Skambinti
Sąlyga: naujas, The SSB 50 F Super VT is a top-tier column drilling machine from KNUTH in the category of pillar and upright drilling machines, ideally suited for workshops handling both maintenance and production tasks. With its robust construction and wide range of features—including drilling, countersinking, reaming, and thread cutting—it is ideal for single-part and small-series production. Equipped with an 8” touchscreen control panel, the machine allows for intuitive operation in selecting the optimal machining parameters. The infinitely variable spindle speed and motorized height adjustment of the table ensure precise results, while the additional thread-cutting function provides further operator support. The SSB 50 F Super VT comes standard with practical accessories such as a coolant system and a splash-proof LED work light. Whether in steel or hall construction or for maintenance applications, this powerful and durable machine will meet your demands. Order the SSB 50 F Super VT now and optimize your workshop.
Cpjdpfx Aonp Hp Ief Tsu
Mažas skelbimas
Wasbek
907 km
Dirbtuvių presas - KNWP 15 M
KnuthKNWP 15 M
Skambinti
Sąlyga: naujas, The KNWP 15 M is a high-quality manual workshop press manufactured in Europe. It belongs to the category of workshop presses and is ideal for repair and assembly tasks in mechanical workshops, garages, and metalworking shops. This robust press enables a wide range of applications such as pressing in and out bearings, straightening workpieces, and materials testing. With a pressing force of up to 15 tonnes and a total piston stroke of 160 mm, it offers both hand and foot operation for flexible working. The 2-stage hydraulic system can be easily switched, while the sturdy, precisely manufactured welded constructions ensure safety. An adjustable worktable and a standard multifunction die make the KNWP 15 M an indispensable tool in any workshop. Secure your workshop press now and benefit from KNUTH quality. Make an enquiry or purchase online!
Cjdponcdu Njfx Af Tjpu
Mažas skelbimas
Aalen
1 175 km
Kampinių guolių ir alyvuogių gręžimo staklės
GÖTZINGEROBM Plus
Skambinti
Sąlyga: naujas, Number of drilling motors: 1 unit
Corner hinge drilling: 1=yes, 0=no | 1 yes
Handle olive drilling: 1=yes, 0=no | 1 yes
Olive drilling machine Type OBM-PLUS
(for corner and stay hinges + handle olive drilling)
Pos. 1
-----
Vertical drilling unit with quick-change drill head device
Pneumatic feed via foot valve
1 adjustable backstop
2 swing-away workpiece supports
1 machine stand complete with storage shelf
220/400 V, 50 Hz, 1.1 kW
Machine without drill head, without drilling tools
Pos. 2
-----
Drill head BKF 3, 21.5 mm pitch, quick-change
Drilling holder M 10, cylindrical, R/L
complete with stop system, 2200 mm long
Total length with 10 flip stops, set to constant handle dimension (for olive drilling)
Pos. 3
-----
1 set of drills (for handle olives), consisting of:
2 dowel drills d = 10 mm, left-hand
1 Forstner bit d = 25 mm
(or as chosen or per fitting manufacturer)
Pos. 4
-----
Drill head BKF 2/3, quick-change
2/3 spindles for corner hinge drilling on the loose frame part
(Sigenia, Maco, Roto, Winkhaus, GU)
complete with stop system with 2 flip stops
Pos. 5
-----
2 cylinder head drills for corner hinge drilling
-----
Base price for configuration as described Pos.1 – Pos.5 on request!
-----
Optional accessories for additional cost:
- Flip stop per piece, EUR 110.00 each
- Stop system for central (mid) drilling, EUR 1,980.00
- Mobility kit, EUR 920.00
- Roller conveyor right/left 1.5 m, 200 mm wide, complete with 4 rollers each, EUR 1,940.00
- Conversion kit for PVC with steel reinforcement:
Cpedeygm Tcepfx Af Teu
Oil damper cylinder for constant feed speed
PVC support to prevent profile tilting
Reduction gearbox for low speed, EUR 1,790.00
- Drill bit set for PVC with steel reinforcement, EUR 420.00:
2 stepped drills d = 12 mm, left-hand
1 stepped drill d = 12 mm, right-hand
- 2 additional stops for stop in tilt window, complete, EUR 180.00
- 2 pneumatic additional stops for referencing mullion groove, complete, EUR 1,650.00
- 2 pneumatic additional stops for referencing dowel drilling in mullion area, complete, EUR 1,650.00
- 4 pneumatic double additional stops for referencing dowel drilling in mullion area, complete, EUR 1,980.00
Note: If the dowel drilling is centered, one stop left/right is sufficient.
If the dowel drilling is off-center, two stops left/right are required.
- Packaging: 1 crate
Packaging: 1 pallet with film, on request
-----
On request, we will be happy to send you the price list with all options.
(Technical specifications provided by manufacturer – subject to change without notice!)
Mažas skelbimas
Aalen
1 175 km
Kampinių guolių ir alyvuogių gręžimo staklės
GÖTZINGEROBM 1
Skambinti
Sąlyga: naujas, Number of drilling motors: 1 unit
Corner bearing drilling: 1=yes, 0=no – 0 no
Olive drilling: 1=yes, 0=no – 1 yes
Olive drilling machine Type OBM 1
Pos. 1
-----
Standard version (for handle olive drilling only)
Drilling unit: vertical
Complete with drilling head BKF 3, 21.5 mm pitch
Cedoygm S Sjpfx Af Tepu
Drill holder M 10, cylindrical right/left.
Pneumatic feed via foot pedal
Spring-loaded hold-downs
Stop system: 2200 mm
Total length with 10 folding stops
Set up for hardware
1 adjustable rear stop
2 swiveling workpiece supports
1 machine stand complete with shelf
220/380 V, 50 Hz, 1.1 KW
Pos. 2
-----
1 set of drills consisting of:
2 dowel drills d = 10 left
1 Forstner bit d = 25
(or by choice/according to hardware manufacturer)
-----
Price for the above configuration Pos. 1 up to Pos. 2 on request!
-----
Optional accessories (at additional cost):
- Folding stop per piece: EUR 110.00/each
- Stop system for center drilling: EUR 1,980.00
- Chassis: EUR 920.00
- Roller conveyor right/left 1.5 m, 200 mm wide, complete with 4 rollers each: EUR 1,940.00
- Packaging 1 crate
- Packaging 1 pallet with film, on request
-----
We will gladly send you the complete price list on request!
(subject to change – no liability)
Mažas skelbimas
Vokietija
1 250 km
Platus juostinis šlifuoklis
Timesavers42-serie-1600-WWB
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, bendras svoris: 5 500 kg, suslėgto oro jungtis: 6 juosta, stalo ilgis: 1 600 mm, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, ruošinio plotis (maks.): 4 000 mm, ruošinio ilgis (maks.): 1 500 mm, Used TIMESAVERS Model 42-Series-1600-WWB – LIKE NEW –
For grinding and satin finishing of surfaces on stainless steel sheets
Wide belt sander with two top-mounted sanding units and one brushing unit
Dry-working machine with Wandres industrial cleaning brush
Cedpfxjq Tp H Hj Af Tjpu
The roller table shown in the gallery image is NOT included with the machine listed above!
Technical Data:
Year of manufacture: 2021
Workpiece dimensions, min: 750 mm x 1000 mm x 2 mm
Workpiece dimensions, max: 4000 mm x 1500 mm x 6 mm
Abrasive belt dimensions (W x L): 1630 x 2620 mm
Table opening: 2–100 mm
Adjustment accuracy: 0.01 mm
Flat feed belt
Feed speed: 4–20 m/min
Electrical Specifications:
Main motor 1st unit, frequency-controlled: 22 kW
Main motor 2nd unit, frequency-controlled: 22 kW
Main motor 3rd unit, frequency-controlled: 15 kW
Feed motor: 3 kW
Electrical connections: 400 V
Frequency: 50 Hz
Compressed Air:
Required air pressure: 6 bar
Air consumption per unit: 30 l/min
Air consumption Wandres: 235 l/min
Dust extraction per unit:
Required airflow at 125 mm water column: 10,000 m³/h
Wandres brush: 600 m³/h
Machine weight: 5,500 kg
On request, dust extraction and/or installation can also be offered.
The roller table shown in the gallery image is NOT included with the machine listed above!
Mažas skelbimas
Bydgoszcz
442 km
IŠ SANDĖLIO Rankinis lazerinis valytuvas 3kW Relfar
LCH-3000-N Relfar
Skambinti
Sąlyga: naujas, Gamybos metai: 2024, Attention – Special Offer!!
First Warranty Inspection Completely Free: Special offer exclusively for customers who participated in a demonstration before purchase – at the Otinus Machinery Showroom in Bydgoszcz.
Cpsdpfxer Eqbyo Af Tsu
Handheld Laser Cleaner “3000W LCH-3000-N”
The laser cleaner is an innovative device for precise and effective surface cleaning. It focuses a laser beam on contaminants, causing them to vaporize or dissolve. Laser cleaners are used across various industries, from automotive to heritage conservation. These devices stand out for their high efficiency, minimal waste output, and limited interference with the surface of the object being cleaned. Compared to conventional cleaning methods, a laser cleaner can be more precise and cost-effective.
The following services are included in the machine price:
A 1-day training and machine installation, up to 8 hours – installation and training on the control unit.
Your Choice of:
MAX Photonics
The brand "MAX Photonics" was established in 2004. The company's roots are in the manufacture of light and optical sources for scientific institutes. Ensuring quality and product reliability was set as the top priority. The company quickly recognized that the future of laser technology is closely tied to fiber optics. Research and development initiated in 2007 led to the launch of their first 500-CW source in 2014. Since then, the company has been intensively developing its technologies in the areas of laser cutting, welding, marking, and engraving. MAX Photonics currently offers sources with power output up to 40,000 W, and is striving to become a leader in the production of ultra-high-power industrial lasers.
Raycus
The company “Wuhan Raycus Fiber Laser” was founded in 2007. It focused on independent research and development, benefitting from mergers with other companies. Raycus produces laser sources for a wide range of applications, including cutting, welding, soldering, marking, and engraving. Devices from this brand are used in the automotive, aerospace, medical, electronics, and advertising industries.
Mažas skelbimas
Bydgoszcz
442 km
Rankinis lazerinis valytuvas 1,5 kW Relfar
LCH-1500-N Relfar
Skambinti
Sąlyga: naujas, Gamybos metai: 2024, Attention – Special Offer!!
First Warranty Inspection Completely Free: Special offer valid only for customers who participated in a demonstration before purchase – at the Otinus machine showroom in Bydgoszcz.
Handheld Laser Cleaner "1500W LCH-1500-N"
The laser cleaner is an innovative machine for precise and effective surface cleaning. It focuses a laser beam on contaminations, causing them to evaporate or dissolve. Laser cleaners are used across various industries, from automotive to historical preservation. These machines are characterized by high efficiency, minimal waste, and limited interference with the surface of the cleaned object. Compared to traditional cleaning methods, a laser cleaner can be more precise and cost-effective.
The following services are included in the machine price:
A one-day training and machine installation, up to 8 hours – installation and training on the controller system.
Choice of Options
Csdsthitpjpfx Af Tspu
MAX Photonics
The brand "MAX Photonics" was established in 2004. Its roots lie in the production of light and optical sources for scientific institutes. Product quality and operational stability have been set as their top priorities. The company soon realized that the future of laser technology is closely linked to fiber optics. Research and development started in 2007, leading to the market introduction of their first 500-CW source in 2014. Since then, the company has been intensively expanding its technologies in laser cutting, welding, marking, and engraving. Today, they offer sources with output up to 40,000 W. Currently, the company aspires to become a leader in the production of ultra-high-power industrial lasers.
Raycus
"Wuhan Raycus Fiber Laser" was founded in 2007. The company focuses on independent research and development, also drawing on its partnerships with other enterprises. They manufacture laser sources for a wide range of applications – including cutting, welding, soldering, marking, and engraving. Devices of this brand are utilized in the automotive, aerospace, medical, electronics, and advertising industries.
Mažas skelbimas
Bydgoszcz
442 km
Rankinis lazerinis valiklis 1 kW Relfar
LCH-1000-N Relfar
Skambinti
Sąlyga: naujas, Gamybos metai: 2024, Attention – Special Offer!!
First warranty inspection completely free of charge: Special promotion only for customers who participated in a product demonstration prior to purchase – at the Otinus machinery showroom in Bydgoszcz.
Handheld Laser Cleaner “1000W LCH-1000-N”
The laser cleaner is an innovative device for precise and effective surface cleaning. It focuses a laser beam onto contaminants, causing them to either vaporize or dissolve. Laser cleaners are used in various industries, from automotive manufacturing to historical monument preservation. These systems are characterized by high efficiency, minimal waste, and low interference with the surface of the object being cleaned. Compared to traditional cleaning methods, a laser cleaner can be more precise and cost-effective.
The following services are included in the machine price:
A one-day training session and machine installation, up to 8 hours – on-site installation and controller training.
Choice of:
MAX Photonics
The “MAX Photonics” brand was established in 2004. The company’s origins lie in producing light and optical sources for scientific institutes. Product quality and operational stability were set as the highest priority. The company quickly recognized that the future of laser technology was closely tied to fiber optics. Research and development efforts that began in 2007 culminated in the launch of their first 500-CW source in 2014. Since then, the company has been rapidly expanding its technologies in the fields of laser cutting, welding, marking, and engraving. Currently, it offers sources with power ratings up to 40,000 W. The company’s present goal is to become a leader in the production of ultra-high-power industrial lasers.
Cpodpfx Afsthiths Tsu
Raycus
The "Wuhan Raycus Fiber Laser" company was founded in 2007. It focused on independent research and development, based on mergers with other businesses. The company manufactures laser sources for a wide range of applications—cutting, welding, soldering, marking, and engraving. Devices from this brand are used in the automotive, aerospace, medical, electronics, and advertising industries.
Mažas skelbimas
Bydgoszcz
442 km
Rankinis lazerinis valytuvas 2kW Relfar
OtinusLCH-2000-N Relfar
Skambinti
Sąlyga: naujas, Gamybos metai: 2024, Attention – Special Offer!!
First Warranty Inspection Completely Free of Charge: Special offer available only to customers who participated in a demonstration prior to purchase – at the Otinus machinery showroom in Bydgoszcz.
Handheld Laser Cleaner “2000W LCH-2000-N”
The laser cleaner is an innovative device for precise and effective surface cleaning. It focuses a laser beam on contaminants, causing them to evaporate or dissolve. Laser cleaners are used across various industries, from automotive to heritage conservation. These devices are characterized by high efficiency, minimal waste, and limited interference with the surface of the object being cleaned. Compared to conventional cleaning methods, a laser cleaner can be more precise and cost-effective.
Cpodpfx Afethitte Tsu
The following services are included in the machine price:
A one-day training session and machine installation, for up to 8 hours – installation and training relating to the control unit.
Optional
MAX Photonics
The brand “MAX Photonics” was founded in 2004. The company’s origins lie in the production of light and optical sources for scientific institutes. Product quality and operational stability were established as the primary objectives. The company quickly recognized that the future of laser technology is closely tied to fiber optics. Research and development efforts, begun in 2007, led to the market launch of its first 500-CW source in 2014. Since then, the company has been actively expanding its technologies in the fields of laser cutting, welding, marking, and engraving. Currently, the company offers sources with power ratings of up to 40,000 W and aspires to become a leader in the production of ultra-high-power industrial lasers.
Raycus
The company “Wuhan Raycus Fiber Laser” was established in 2007. It focuses on independent research and development, fostered by mergers with other companies. Raycus produces laser sources for a wide range of applications, including cutting, welding, soldering, marking, and engraving. Devices from this brand are widely used in the automotive, aerospace, medical, electronics, and advertising industries.
Mažas skelbimas
Bydgoszcz
442 km
Lazerinio pjovimo sistema 3000x1500 20kW
OtinusFLV-3015-C2 20kW
Skambinti
Sąlyga: naujas, Gamybos metai: 2024, Attention – Special Offer!!
First Warranty Inspection Completely Free of Charge: Special offer only for customers who participated in a demonstration before purchase – at the Otinus Machinery Showroom in Bydgoszcz.
Some of our machines are AVAILABLE FROM STOCK.
Fibre Laser Cutting System “FLV-3015-C2 20kW / VF1530-12000W”
Technical Specifications
- Maximum sheet size: 3000 x 1500 mm
- X and Y axis positioning accuracy: ±0.05 mm/m
- X and Y axis repeatability: ±0.03 mm
- Maximum speed: 120,000 mm/min
- Maximum acceleration: 1.5 G
- Power: 20 kW
- Power consumption: 73 kW
- Source brand: Raycus or “MAX Photonics” – selectable
- Power supply: ~3×400 V, 50 Hz
- Protection class: IP54
Cutting Thickness
- Mild steel: recommended thickness – 35 mm, maximum thickness – 35 mm
- Stainless steel: recommended thickness – 25 mm, maximum thickness – 25 mm
- Aluminium: recommended thickness – 18 mm, maximum thickness – 18 mm
- Brass: recommended thickness – 18 mm, maximum thickness – 18 mm
Construction
The machine offers exceptional stability thanks to its welded construction on sturdy legs. High head movement speed and precision are ensured by Japanese Fuji servo drives mounted on robust linear guides, helical racks, and pinions.
The ABLS system automatically replenishes lubricant in the axis guides.
Cedpfxjtixt Hs Af Topu
RayTools Cutting Head with Autofocus
Wireless Controller
Laser head operation is managed via a wireless controller.
Safety
The fibre laser cutting system is equipped with all the necessary safety features and accessories for the operator. An additional safety feature is the emergency lighting with acoustic signal, which is activated in hazardous situations to alert the operator and ensure safety.
Free Drawing Package
Every Otinus laser cutting system comes with an extensive CAD drawing package. The included designs are completely prepared and can be immediately cut in any format. During training, our technician will show you how to use them. The drawings are invaluable for anyone aiming to manufacture a wide range of decorative items.
Technical Consultation
We have specialists who can help select the appropriate machine and accessories prior to purchase—based on the technical drawings of your components.
Machine Delivery Includes
- 2-day training and machine installation
- Day 1: up to 8 hours – commissioning and control system training
- Day 2: up to 8 hours – independent machine operation under the supervision of our technician, including the ability to program specific parts
- Technical consultation with our specialists
- By phone: from 7:30 am to 9:00 pm (Mon-Sat) – 8-hour package to be used within 12 months
- Online: from 7:30 am to 2:30 pm (Mon-Fri) – 8-hour package to be used within 12 months
- Access to Otinus Academy online courses
- LibreCad – access for 12 months
Additionally, you receive:
- CAD drawing package
Mažas skelbimas
Лубни
841 km
Lakštinio metalo lenkimo staklės
RAS74.30
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 107/50, The machine is in fully operational condition.
Multibend 2000 RAS 74.30 folding machine from RAS Reinhardt Maschinenbau GmbH is a universal CNC folding machine with a swiveling beam, a wide selection of segmented tooling, and a working length of 3200 mm, designed for bending steel sheet (400 MPa). A manual or intelligent crowning system is integrated directly into the folding beam to ensure precise and consistent bending along the entire length. Elastic deformations of the folding beam depend on sheet thickness, strength, properties, working length, and positioning on the support beam. Sensors built into the folding beam detect its actual deformation during the first 10 degrees of bending, after which the system sends a command to actuators adjusting the beam camber. This compensates for beam deflection. The control system stores all parameters for each new bend and utilizes them for subsequent operations. The bending line is always perfectly straight with the specified radius, regardless of metal thickness, length, ductility and strength, segment height, or position in the bending zone.
Csdpfxsyfm Uds Af Tspu
Technical specifications:
Working length – 3200 mm
Max. sheet thickness – 4 mm
Minimum permissible bending radius – 1.25 mm * sheet thickness
Minimum permissible flange height – approx. 6 mm * sheet thickness
Max. upper beam opening width – 400 mm
Adjustment range of bending and lower beam – 80 mm
Bending angle – 0-180 degrees
Max. bending speed – 70 degrees/sec.
Max. upper beam speed:
UP 44 mm/sec.
DOWN 90 mm/sec.
Electrical connection – 7.5 kW
Stroke depth – 10-1550 mm
Adjustment speed – 200 mm/sec.
Pneumatics – 6 bar
CNC control – MULTIBEND 2000
Machine dimensions (L * W * H) – 4.5 * 2.1 * 2.65 m
Machine weight – 5590 kg
Total weight with basic equipment – 5890 kg
Year of manufacture – 1997
Mažas skelbimas
Vokietija
999 km
2 spalvos
HeidelbergSM 52-2
Skambinti
Sąlyga: naudotas, Gamybos metai: 2000, This Heidelberg SM 52-2 is a robust two-color sheetfed offset press designed for high-quality offset printing on sheets. Built in 2000, it features a sheet size of 370 x 520 mm and has produced approximately 78 million impressions, highlighting its reliability and extensive use.
The machine is equipped with advanced technologies to optimize workflow and enhance print quality. It includes the automatic Alcolor dampening system for consistent ink-water balance, and the Autoplate semi-automatic plate changing system for efficient job changeovers. The Cptronic control system and chrome-plated cylinders ensure precision and durability, while the integrated blanket and ink roller wash-up devices simplify maintenance and reduce downtime.
Additional features include a powder spray and cooling unit for optimal printing conditions, as well as a numbering and perforating unit complete with two cams, wheels, and multiple counters—ideal for security printing or serial numbering. Manufactured in Germany, this press delivers powerful, reliable performance for a wide range of printing applications.
Format: 370 x 520 mm
Equipment:
- Two-color straight printing press
- Alcolor automatic film dampening system
Cpodpfexizdtox Af Teu
- Autoplate: semi-automatic plate changing system
- Cptronic control, chrome-plated cylinders
- Blanket wash-up device – impression cylinder wash-up device
- Ink roller wash-up device (console-controlled)
- Powder spray, cooling unit
- Numbering and perforating unit complete with two cams, wheels, and multiple counters
Mažas skelbimas
Vokietija
999 km
Lankstymo mašina
HorizonAFC-502
Skambinti
Sąlyga: naudotas, The Horizon AFC-502 folding machine (serial number 23027) is a versatile solution for professional folding applications. It is currently dismantled and located in Germany. Designed for precise and efficient processing of a wide range of formats, it meets the demands of commercial print environments.
This model features two parallel folds and one cross fold, facilitated by a suction head with a rotary feeder for smooth and reliable sheet handling. The machine accommodates sheet widths up to 500 mm (minimum 105 mm) and lengths up to 648 mm (minimum 174 mm). Cross folding is possible from 182 mm to 500 mm, while perforation is available for sheet widths from 105 mm to 500 mm.
Performance highlights:
- Folding capacity: 2 parallel folds + 1 cross fold
- Sheet width: 105 – 500 mm
- Sheet length: 174 – 648 mm
- Cross fold: 182 – 500 mm
- Perforation width: 105 – 500 mm
- Speed: up to 180 m/min
The compact and efficient Horizon AFC-502 is an ideal choice for print shops requiring reliable folding performance for variable formats.
Csdpfx Aew U Dtvjf Tjpu
Format: 500 mm
Equipment:
- 2 parallel folding units
- 1 cross fold unit
- Maximum sheet width: 500 mm, minimum: 105 mm
- Maximum cross fold: 500 mm, minimum: 182 mm
- Maximum perforation: 500 mm, minimum: 105 mm
- Maximum sheet length: 648 mm, minimum: 174 mm
- Maximum speed: 180 m/min
- Suction head with rotary feeder
Mažas skelbimas
Vokietija
999 km
Lankstymo mašina
HorizonAFC-544 AKT
Skambinti
Sąlyga: naudotas, The Horizon AFC-544 AKT is a versatile cross-folding machine currently in operation at a print shop in Germany. Designed for sheet formats up to 540 x 760 mm (minimum 120 x 172 mm), it combines efficiency and flexibility for a wide range of folding applications. The machine features four folding pockets with knife in the first folding unit and two folding pockets in the second folding unit, supported by a fully automatic knife for precise fold execution.
Equipped with “Touch & Work” technology, it offers intuitive operation and comes with 17 pre-programmed standard fold types as well as memory for 200 repeat jobs. It processes paper weights from 40 to 250 gsm and achieves a maximum speed of 40,000 cycles per hour.
Further specifications:
Folding length: minimum 58 mm (1st pocket), 35 mm (other pockets)
Stack height: 650 mm
Power requirements: 400 V / 50 Hz – 2.5 kW
Dimensions: 2,700 x 1,050 x 1,650 mm
Weight: 1,050 kg (without delivery belt)
This machine provides a compact and powerful solution for professional folding requirements, combining automation, storage features, and robust engineering.
Cjdpfxjw Upqmo Af Tepu
Format: 540 x 760 mm
Features:
4-pocket cross folder
Parallel folding
Cross folding
Technology: Touch & Work
Fold program memory:
17 standard folding types pre-programmed
Memory capacity: 200 repeat jobs
1st folding unit: 4 pockets + knife
2nd folding unit: 2 pockets
Knife: fully automatic
Sheet size: max. 540 x 760 mm; min. 120 x 172 mm
Folding length: 1st pocket: min. 58 mm, all other pockets: min. 35 mm
Paper weight: 40–250 gsm
Pile height: 650 mm
Speed: max. 40,000 cph
Power: 400 V / 50 Hz – 2.5 kW
Dimensions: 2,700 x 1,050 x 1,650 mm
Weight: 1,050 kg (without delivery belt)
Mažas skelbimas
Vokietija
999 km
Fleksografinė spauda
DERITENDROTADIE 15
Skambinti
Sąlyga: naudotas, Gamybos metai: 1984, The DERITEND ROTADIE 15 is a versatile and robust machine designed for high-quality flexographic printing. Manufactured in 1984, this machine continues to be produced in Germany today. It is equipped with a vacuum feeder and a dust extraction system to ensure efficient and clean operation. The ROTADIE 15 features four flexo printing units for precise and detailed print results. It supports vacuum operation and is equipped with ceramic rollers and a chambered doctor blade for premium print quality. Additional features include side lay printing units, an electric register control for precise alignment, and an automatic stacker for efficient material handling. With a maximum sheet size of 1,700 x 1,150 mm and a minimum sheet size of 520 x 600 mm, the ROTADIE 15 is suitable for a wide range of print jobs. Its impressive top speed of 9,000 sheets per hour makes it a reliable choice for high-volume printing tasks.
Specifications:
Max sheet size: 1,700 x 1,150 mm Min sheet size: 520 x 600 mm
Equipment:
- Vacuum feeder
- Dust extraction system
- 4 flexographic printing units
- Bottom printing system
- Fitted with ceramic rollers and chambered doctor blade
- Side lay printing units
Codsxizdmopfx Af Tepu
- Electric register control
- Automatic stacker
- Max. sheet size: 1,700 x 1,150 mm
- Min. sheet size: 520 x 600 mm
- Max. speed: 9,000 sheets per hour
Mažas skelbimas
Aalen
1 170 km
Juostinis pjūklas
PanhansBSB 600
Skambinti
Sąlyga: naudotas, juostinio pjūklo ilgas: 4 720 mm, pjūklo juostos plotis: 20 mm, bendras aukštis: 2 350 mm, bendras ilgis: 1 200 mm, bendras plotis: 800 mm, pjovimo plotis (maks.): 585 mm, bendras svoris: 300 kg, pjovimo aukštis (maks.): 395 mm, stalo plotis: 630 mm, stalo ilgis: 820 mm, įėjimo įtampa: 380 V, reikalingas plotis: 800 mm, vietos reikalavimas ilgis: 1 200 mm, reikalingas aukštis: 2 350 mm, galia: 2,2 kW (2,99 AG), pjūklo disko ilgis: 4 720 mm, No. 04512
Band Saw Panhans BSB 600
Used
Wheel diameter: 600 mm
Wheel speed: 800 rpm
APA bandsaw blade guides, top and bottom
Brake motor: 2.2 kW, 380 V
Cutting height: 395 mm
Cutting width: 585 mm
Maximum blade length: 4720 mm
Table size: 820 x 630 mm (L x W)
Table tiltable with scale up to 45°
Machine TÜV / GS tested
Includes 3 saw blades (2x 20 mm wide, 1x 15 mm wide)
Machine is ready to plug in, including cable and 16 A plug
Transport dimensions approx. 1200 x 800 x 2350 mm (L x W x H)
Csdpfxoygahyo Af Topu
Weight approx. 300 kg
To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended.
The sale is made in its current condition.
Technical data, condition description, year of manufacture and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: "sold as seen".
Terms of payment: Prices plus statutory VAT, payment prior to collection or shipment.
Terms of delivery: ex stock.
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Gais
1 245 km
Smulkintuvai, sodo smulkintuvai
Brugger HX10 Holzhäcksler, 14PS
Skambinti
Sąlyga: naujas, Gamybos metai: 2024, galia: 10,3 kW (14,00 AG), kuro tipas: benzinas, Brugger HX10 Chipper – Powerful, Compact, and Versatile!
The Brugger HX10 chipper is the ideal solution for landscaping professionals and hobby gardeners alike who require a powerful yet highly maneuverable chipper.
Equipped with a robust 14 HP petrol engine and sturdy construction, the HX10 effortlessly chips branches and trunks with diameters exceeding 10 cm. Whether in private gardens or on larger properties, this chipper delivers reliable performance in every corner!
Thanks to its narrow design, the HX10 is perfectly suited for operation in confined spaces. The unit can be easily adjusted and maneuvered by hand, allowing you to work efficiently even in difficult garden areas.
With a width of only 80 cm, the HX10 fits through any garden gate.
Your benefits at a glance:
- Powerful: 14 HP petrol engine for high-performance chipping
- Effective: Processes branches and trunks up to and over 10 cm in diameter
- Compact and agile: Slim design for easy maneuvering in tight spaces
- Easily adjustable: Flexibly adaptable for comfortable operation
- Perfect for landscaping: Ideal for use in both private and professional gardens
The Brugger HX10 – your all-purpose tool for efficient garden maintenance!
Technical data:
Dimensions: 140 x 80 x 165 cm (L x W x H)
Weight: 185 kg
Blades: 2, 30 cm wide
Max. diameter: 10 cm
Processing capacity: 4-6 m3/h
Feed hopper: 51 x 42 cm
---
All prices plus VAT.
Contact us for a customized quotation!
Cpedsumv E Hepfx Af Teu
Mažas skelbimas
Vokietija
999 km
Įvairūs
BVMCompacta Trend 6020
Skambinti
Sąlyga: naudotas, Gamybos metai: 2003, The BVM Compacta Trend 6020 is a high-performance shrink-wrapping machine designed for efficient and reliable packaging tasks. Manufactured in 2003, the machine is currently located and in operation in Germany. It features a side-sealing function and operates fully automatically, ensuring consistent and precise packaging results. The Compacta Trend 6020 is suitable for a wide range of product applications, including paper, packaging machinery, adhesive tape strips, and bundles. With a throughput of 60 packs per minute, it handles materials up to 500 mm (19.7 in) in width and 450 mm (17.7 in) in length. Thanks to its side-sealing capability and inline operation, it is the ideal choice for high-volume packaging tasks, guaranteeing secure wrapping and reliable product protection.
Format: 650 mm
Equipment:
- Shrink film packaging machine with side sealing
- Fully automatic operating mode
- Product applications: paper, packaging machinery, adhesive tape strips, bundles
- Additional features: side sealing, inline, film wrapping
- Output: 60 packs/min
- Width: 500 mm (19.7 in)
Csdpewc T N Rjfx Af Tspu
- Length: 450 mm (17.7 in)
Mažas skelbimas
Vokietija
999 km
Lankstymo mašina
HorizonAFC 566 FKT + PST-40
Skambinti
Sąlyga: naudotas, Gamybos metai: 2010, The Horizon AFC 566 FKT + PST-40 folding machine from 2016 is a high-performance solution for efficient and precise folding operations. Manufactured in Germany, this machine handles a wide range of sheet formats from a minimum of 60 x 64 mm up to a maximum of 558 x 850 mm, with a maximum mechanical speed of 240 m/min (30,000 cycles/hour). Featuring a flat pile feeder for stack heights up to 740 mm, it ensures continuous and efficient paper feeding. The main folding unit, an AFC-566 FKT with six combination folding plates, provides manual adjustment for both pocket and roller configurations. It is equipped with a used roller and a cross-fold unit with a single knife, delivering versatile folding options with a maximum working width of 558 mm and a maximum fold length of 850 mm. The machine also includes a noise protection hood and touchscreen control for user-friendly operation. Delivery is managed by a PST-40 press stacker (year of manufacture 2010, serial number 360003) with a maximum working width of 440 mm and a pressing force of 20,000 N, ensuring efficient and orderly output. This machine is ideally suited for companies looking to expand their folding capacity with a reliable and powerful solution.
Specifications:
Feed
Feeder type: Flat pile feeder
Max. stack height: 740 mm
Folding Units
First unit
Type: AFC-566 FKT
Pockets: 6
Pocket type: Combination folding plates
Pocket configuration: Manual
Roller configuration: Manual
Cpsdjwcqw Sepfx Af Tou
Roller condition: Used
Max. working width: 558 mm
Max. fold length: 850 mm
Cross-fold unit with 1x knife
Noise protection hood
Touchscreen control
Delivery
Delivery mode: PST-40
Type: Press stacker
Year: 2010
Serial number: 360003
Max. working width: 440 mm
Technical Details
Max. sheet size: 440 x 310 mm
Min. sheet size: 60 x 64 mm
Min. infeed height: 280 mm
Max. mechanical speed: 240 m/min
Pressing force: 20,000 N
Built-in controller
Technical details:
Max. sheet size: 558 x 850 mm
Min. sheet size: 128 x 148 mm
Max. mechanical speed: 240 m/min
Max. mechanical speed (cycles): 30,000 cycles/h
Mažas skelbimas
Vokietija
999 km
Pjovimo staklės
Perfecta168 HTVC + Basa 7
Skambinti
Sąlyga: naudotas, Gamybos metai: 2007, The Perfecta 168 HTVC + Basa 7 is a robust and efficient machine designed for high-performance cutting and finishing tasks. Manufactured by Perfecta in 2007, this model is renowned for its durability and precision. The machine supports a 1680 mm format, making it ideal for a wide range of applications. It is currently installed and operational in Germany, providing easy accessibility for users in the region. The Perfecta 168 HTVC + Basa 7 features a touchscreen for easy and intuitive programming, enhancing user control and operational efficiency. Equipped with a monitor screen, it offers clear visual feedback and process monitoring. The machine has a stainless steel air table, ensuring smooth material handling and precise cutting. Both the left and right side tables are air-supported and made of stainless steel, further improving material flow and precision. Operator safety is ensured by integrated safety cells. The stack lift type is a pallet feeder, enabling efficient loading and unloading of materials, and the jogger type is BASA 7, providing effective alignment and stacking of materials. The Perfecta 168 HTVC + Basa 7 is a reliable choice for industries requiring precise cutting and finishing. Its advanced features and robust construction make it a valuable asset in any professional environment.
Format: 1680 mm
Features:
Type: Perfecta 168 HTVC
Programming via touchscreen
Monitor screen
Air table (stainless steel)
Cpjdpfx Aevghklef Tsu
Air table
Side air tables (stainless steel): Left & right
Safety cells
Stack lift type: pallet feeder
Jogger type: BASA 7
Palengviname jums paiešką: "widos"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Widos (2 030)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo





















































































































































































