Uniwig Gw 280 pirkti naudotą (2 869)

Būklė: naudotas, Variator pulley, Vario adjustable belt pulley, variator belt pulley, PIV gearbox, variable speed drive, variable speed pulley, expandable pulley, adjustable V-belt pulley -Manufacturer: Berges, variator belt pulley -Type: 280 -Outer diameter of pulley: 295 mm Dedpfx Afet Dddlo Aout -Bore/Hub: Ø38 x 160 mm -Dimensions: Ø295 x 170 mm -Weight: 7.8 kg

Būklė: naudotas, Chuck flange, flange mount, scroll chuck flange, driver flange - Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate - Outer diameter: Ø 280 mm - Inner diameter: Ø 142 - 145 mm - Dimension: Ø 280 x 45 mm - Weight: 13 kg Dsdpfx Afof Ek I Dj Asut

Būklė: naudotas, Flange for chuck, flange mount, chuck adaptor flange, drive flange, intermediate flange - Chuck flange: suitable for three-jaw chuck, four-jaw chuck, faceplate - Outer diameter: Ø 280 mm - Inner diameter: Ø 105 mm - Mount: Taper Ø 138 mm / short taper 8 Dsdjf Ewcxspfx Af Aout - Dimension: Ø 280 x 35 mm - Weight: 13 kg

Būklė: naudotas, kuro tipas: elektrinis, Hydraulic cylinder, support cylinder, hydraulic ram, thrust ram, tipping cylinder -Manufacturer: GSL (German Standard Lift), hydraulic cylinder with control valve, stroke 280 mm Dodpfx Aeiy R Upjf Asut -Model designation: D120050AAV60330 T28 -Piston rod: Ø 50 mm -Mounting: Ø 40 mm -Dimensions: 615/145/H230 mm -Weight: 40 kg

Būklė: geras (naudotas), Upper support, top slide, dovetail guide, tool slide, cross table, compound slide, compound slide carrier Duedpfx Afov Tv Tno Ast - Tool slide: compound slide, compound slide carrier - Base plate: 265 x 180 mm - Dimensions: see photos - Overall dimensions: 290/280/H70 mm - Weight: 21.1 kg

Būklė: geras (naudotas), V-belt pulley, pulley with taper bush fitting, taper tension bush, taperlock tension bush Dusdpfxslu N Ehe Af Aot - V-belt pulley: 4-groove pulley 280/4 - V-belt width: 17 mm - Taper bush fitting: Ø 65 mm (interchangeable) - Quantity: 1x V-belt pulley available - Dimensions: Ø 287 x 82 mm - Weight: 14.4 kg

Būklė: geras (naudotas), Pneumatic cylinder, air cylinder, pneumatic actuator, air actuator, standard cylinder -Top slide: PD44645-0280 -Stroke: 280 mm -Piston diameter: 50 mm Duedpofbhz Iefx Af Aot -Piston rod: 20 mm -Dimensions: 805/65/H65 mm -Weight: 3.6 kg

Būklė: geras (naudotas), Gear motor, electric motor, geared electric motor, helical gear motor, frequency-controlled gear motor, adjustable gear motor, variable speed gear motor - Manufacturer: SEW-Eurodrive, variable speed gear motor - Type: RF07 DRS71S4/MM03 i = 4.86 - Drive motor: with frequency inverter MM07D-503-00 Dsdpsq Syt Tjfx Af Aout - Speed: 25 to 280 rpm / i = 11.18 - Power: 0.37/0.074 kW - Shaft: Ø 20 x 40 mm - Protection class: IP54 - Dimensions: 360/250/H180 mm - Weight: 10 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1967, Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle head drive mount: MK4 -Maximum number of drilling heads: 9 units -Number of cardan shafts: 4 units with MK1 mount -Drill holder: MK1 -Maximum drilling pattern (dimensions of drills): 280 x 280 mm -Multi-spindle heads: are versatile tools -For various machining operations: such as drilling, thread tapping, countersinking, and reaming Dujdpfjd E Hlasx Af Ast -Allowing multiple holes to be machined simultaneously -Dimensions: 330/330/H515 mm -Weight: 36 kg

Būklė: geras (naudotas), V-belt pulley, pulley with taper bush, taper tension bush, taperlock tension bush Dodpfxjpix Nne Af Ajut - V-belt pulley: 5-groove pulley type SPB 280-5 3535 - V-belt width: 17 mm - Bore: Ø126/115 mm for taper tension bush 3535 (Ø can be changed) - Dimensions: Ø287 x 100 mm - Weight: 18.8 kg

Būklė: geras (naudotas), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tipping cylinder, lift cylinder -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 280 mm -Type: E030ZM60279 T18 -Piston rod: Ø 30 mm -Mounting: Ø 19 mm -Dimensions: 395/83/H70 mm Duedpjvt S A Ssfx Af Aot -Weight: 4.4 kg

Būklė: naudotas, Clamping plate, clamping table, clamping cube, press table -Clamping table: Clamping plate for hydraulic press/excenter press -Clamping surface: 500 x 280 mm -Dimensions: see technical drawing in photo Dsdpfju N Siuex Af Asut -Overall dimensions: 500/280/H180 mm -Weight: 53 kg

Būklė: labai geros būklės (naudotas), Pressure switch, pressure controller, pressure limiter, gas pressure switch, gas pressure controller, gas pressure monitor -Manufacturer: Dungs, gas pressure monitor OVP -Type: GW 500 A4 242485 -Adjustment range: 0.1 - 0.5 bar Duodpfxjiiigho Af Aot -Pmax.: 2.0 bar -Carton dimensions: 75/70/H80 mm -Weight: 0.4 kg

Būklė: naujas, Gamybos metai: 2026, veikimo valandos: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for already producing a saleable briquette quality *depending on material. The large-sized press cylinder and the 80 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and the hydraulic oil (recommended if the press is to run regularly for longer than approx. 3.5 hours without interruption) Briquette diameter: 80 mm Front bushing: 125 mm Max. briquette stroke: 100 mm Dusdpjxfwdofx Af Ast Optimal briquette stroke: 80 mm Capacity (material dependent): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volts / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil quantity: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compactor Option: cooling for press tongs – yes, with special accessory "coolable press tongs" Option: hydraulic oil cooling – yes Cooling of press tongs and hydraulic oil with cooling unit (special accessory) Option: fill level monitoring – yes Option: continuous briquette – yes (material-dependent) Option: enlarged feed slide – yes, with special accessory "enlarged feed slide" CE compliant . Raw material requirements: - The moisture content (absolutely dry) must be at least 6% and no more than 18% - Maximum chip length: 20 mm - Installation temperature: temperature-controlled room, at least +5°C - Feed must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Būklė: naujas, galia: 81 kW (110,13 AG), kuro tipas: dyzelinas, kuras: dyzelinas, spalva: mėlyna, emisijos klasė: Euro 6, Gamybos metai: 2024, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, naudoto automobilio garantija, navigacijos sistema, oro pagalvė, priekabos jungtis, stumdomos durys, sunkvežimio registracija, trauki kontrolė,

Būklė: naudotas, Gamybos metai: 2011, 1 used welding machine Manufacturer: Merkle Model: MobiARC 280 cel Year of manufacture: 2011 Technical specifications: Merkle MobiARC 280 cel+ welding inverter – supplied with accessories Primary winding: Mains voltage: 400 V Mains frequency: 50/60 Hz Power consumption: 8.3/5.5 | 9.7/8.3 kW Current consumption: 12/8 | 14/12 A Maximum current: 21/16 A, cos φ: 0.98 Dodpfjh Nvfnox Af Ajut Manual (MMA) welding: Electrode diameter: 1.5–6.0 mm Open-circuit voltage: 96 / 90 V Welding voltage: 20.6–31.2 V Welding current: 15–280 A, current at 60% duty cycle: 250 / 260 A TIG welding: open-circuit voltage: 96 / 90 V, welding voltage: 10–21.2 V, welding current: 5–280 A, current at 60% duty cycle: 250 / 270 A Insulation class: H Protection class: IP23 Operating modes: MMA, TIG (DC) Cooling: AF Overall dimensions: 485 x 200 x 435 mm Weight: 17.5 kg

Būklė: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, konvejerio juostos ilgis: 4 000 mm, konvejerio juostos plotis: 280 mm, konvejerio juostos greitis: 90 mm/s, bendras ilgis: 3 300 mm, bendras plotis: 650 mm, bendras aukštis: 2 500 mm, bendras svoris: 150 kg, iškrovimo aukštis: 2 360 mm, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, variklių gamintojas: Panasonic, Įranga: Tipinė plokštelė prieinama, TAF prekės numeris: 1000005822 Gamintojas: Fimatech Metai: 2004 Bendri matmenys (IxPxA), mm: 3.300 x 650 x 2.500 Plotis su šonine sienele, mm: 320 Plotis su pavaros mechanizmu, mm: 600 Dsdpox R Dwusfx Af Ajut Sienelės aukštis, mm: 310 Bendras transportavimo ilgis, mm: 4.000 Horizontalus transportavimo ilgis, mm: 1.000 Vertikalus transportavimo ilgis, mm: 3.000 Transportavimo plotis, mm: 280 Diržo tipas: plastikinės lamelės / grandininis juostos transporteris Diržo plotis, mm: 290 Kriauklės (aukštis/žingsnis), mm: 25 / 460 Apatinė konstrukcija: mobilus / reguliuojamas aukštis Slydimo paviršius: plienas Įėjimo aukštis, mm: maks. 340, min. 280 Išėjimo aukštis, mm: maks. 2.360, min. 2.300 Pavara: galvos pavara Variklio tipas: reduktorinis variklis Variklio duomenys: Panasonic 400V, 50 Hz, 0,5 A Transportavimo greitis, m/s: 0,09 Grynoji masė, kg: 150 Ypatumai: programuojamas eigos valdymas Būklė: naudota / visiškai veikianti Funkcinis testas: OK

Būklė: naudotas, Gamybos metai: 2023, Condition: used Year of manufacture: 2023 Stock number: 6242 Delivery time: immediate, subject to prior sale Country of origin: Italy Price: €5,400 In stock: 1 unit Saw frame: pivoting frame Saw blade dimensions: 2450x27x0.9 mm Blade speed: 35/70 m/min Cutting capacity 0° round: 220 mm Cutting capacity 0° square: 220 mm Cutting capacity 0° flat: 260x140 mm Cutting capacity 45° round: 160 mm, square: 155 mm Cutting capacity 60° round: 95 mm, square: 95 mm Working height: 965 mm Length: 1200 mm Width: 1100 mm Height: 1860 mm Weight: 240 kg Demonstration machine / as-new condition Net price (List price €6,730.00) Manual vice with quick-release lever Dusdpfswiqpzox Af Ajt Descent by gravity with adjustable damper 2 speeds Coolant system OPTIONS: Roller conveyors and saw blades available on request

Būklė: geras (naudotas), Gamybos metai: 1994, The machine was newly re-bedded and equipped with new brushes one year ago. The wash brushes are in very good condition! - 8 brushes - Without infeed and outfeed section - Includes control cabinet and drying blower - Working direction: from right to left - Washing height: 2.3 m - Glass thickness: 4–15 mm Duodpfx Aoqc Udief Aot - Width: 2900 mm - Depth: 1100 mm - Height: 3400 mm

Būklė: geras (naudotas), High-pressure radial fan, dust extraction blower, exhaust gas extraction, heating blower, welding fume extraction, extraction unit, fan, pressure blower, vacuum blower - Exhaust air extraction blower - Electric motor: Lammers 400/690 V / 3 kW - Fan: Hansa Ventilatorenbau Type BC 280-5/4K-X/UX 1101 - Speed: 3179 rpm Dujdpfoff Aq Aox Af Ast - Air flow rate: 2,160 m³/h - Inlet connection: Ø 735 mm - Outlet connection: 365 x 310 mm - Dimensions: 1300/740/H820 mm - Weight: 153 kg

Būklė: geras (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, bendras svoris: 1 450 kg, bendras ilgis: 1 620 mm, bendras plotis: 930 mm, bendras aukštis: 920 mm, pavaros santykis: 200:1, sukimo momentas: 21 400 Nm, veleno skersmuo: 160 mm, galia: 14 kW (19,03 AG), 6 units industrial bevel-helical gearboxes by Flender / ASUG / Penig TGL 21815 Duodpfx Aorvg N Dof Aet Maximum continuous torque: 27,280 Nm Gear ratio: i = 200:1 Maximum power output: 14 kW at 1,250 rpm 20 kW at 1,400 rpm Oil filling: 170 kg Weight: 1,450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Also available: Sprocket 48B3 17 teeth and 48B3 35 teeth

Gamybos metai: 2016, būklė: naujas, 1 piece of completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815 All gearbox components have been renewed except for the housing! Jaw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil filling: 170 kg Input speed: n1 = 1400 Output speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Base length: 1170 mm Duodpfx Aegwlrdef Aet !! Gearbox does not have an oil cooler !!

Būklė: naudotas, rida: 627 315 km, galia: 210 kW (285,52 AG), pirmoji registracija: 03/2017, kuro tipas: dyzelinas, tuščias svoris: 11 697 kg, didžiausias leistinas svoris: 6 303 kg, bendras svoris: 18 000 kg, padangos dydis: 315/70R22.5, ašių konfigūracija: 4x2, ratų bazė: 6 100 mm, kita apžiūra (TÜV): 09/2023, stabdžiai: pastovus droselis, spalva: balta, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, sėdimų vietų skaičius: 2, krovimo vietos ilgis: 8 189 mm, krovinių skyriaus plotis: 2 467 mm, krovos erdvės aukštis: 2 475 mm, Įranga: ABS, autonominis šildytuvas, borto kompiuteris, centrinis užraktas, diferencialo užraktas, elektroninė stabilumo programa (ESP), galinis keltuvas, kabina, kruizo kontrolė, oro kondicionavimas, spoileris, trauki kontrolė, vairo stiprintuvas, visų varančiųjų ratų pavara,

Būklė: naudotas, rida: 369 845 km, galia: 210 kW (285,52 AG), pirmoji registracija: 04/2016, kuro tipas: dyzelinas, bendras svoris: 16 000 kg, ašių konfigūracija: 2 ašys, kita apžiūra (TÜV): 08/2026, spalva: raudona, pavaros tipas: automatinis, emisijos klasė: Euro 6, bendras plotis: 2 550 mm, bendras aukštis: 3 200 mm, krovinio erdvės tūris: 29 m³, krovimo vietos ilgis: 6 242 mm, krovinių skyriaus plotis: 2 403 mm, krovos erdvės aukštis: 1 998 mm, Įranga: ABS, elektroninė stabilumo programa (ESP), galinis keltuvas, navigacijos sistema, oro kondicionavimas,

Būklė: naujas, Punching force: 28.0 t Punching cross-section in sq mm: 31 at 7.0 mm ST Throat depth: 250 mm Installation height: 223 mm Stroke rate: 10 - 30 strokes/min Oil capacity: 32.0 l Working height: 1033 mm Total power requirement: 3.0 kW Machine weight: approx. 553 kg Space requirements: approx. 730 x 540 x 1530 mm Equipment: - Quick-change punch device up to Ø 31 mm – green series – Installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swing-away stripper (plates can be replaced) - Various material support tables available separately - Support stand - 2-stage foot switch, with double-press for center-punch function - Electric control elements - Stroke length and stroke position continuously adjustable Dodpfew U U S Njx Af Ajut - Integrated hydraulic power unit with oil filling - Performance specifications based on material strength of 450 N/mm² - Main connection cable and 16-amp plug are not included in the scope of delivery