Traub Tna 300 pirkti naudotą (94)

Sąlyga: geras (naudotas), Gamybos metai: 2013, BAR FEEDER TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Bsdpfswc Amxex Ableww Machine weight approx. 0.7 t Space requirement approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Motor speeds: 1400–2800 rpm Bar loader included!

Sąlyga: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 86 157 h, The machine was manufactured in 1999 and underwent an 8,000-hour maintenance service last year. Bwsdpjwur N Tofx Abljw Total production hours: 86,157 h. Turret 1 has 14 stations (with Y-axis) Turret 2 has 10 stations (without Y-axis)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNC65DGY, TX8I, Year 2005, Serial No. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x powered tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, part gripper, bar loader Iemca Master 880MP-E. Condition Bwsdpfxswi I Eyo Abljw Very well maintained, good condition, serviced. Machine geometry has been checked and adjusted/set up. The machine can be inspected under power – video also available. Warranty 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the spare parts, not for downtime or labor hours, travel time. The warranty expressly does not cover any parts other than those mentioned above, e.g. wear parts, electrics, electronics, hydraulics, etc.

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm Bedpfx Absuhadzolsww - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2x HAINBUCH

Sąlyga: naudotas, AUTOMATINIS VIENO VERPTUVĖS TEKINIMO STAKLĖS TB-42, maks. skersmuo 42 mm Bodpfx Abexcpi Rjloww

Sąlyga: naudotas, Gamybos metai: 2006, veikimo valandos: 37 000 h, Funkcionalumas: visiškai funkcionalus, TRAUB TNX65 with Bar Loader and Accessories Year of manufacture: 2006 Operating hours: 37,000h Control system: TX8i - Both tool turrets newly resealed - High-pressure pump replaced - Machine fully operational - Geometry within manufacturer's tolerance Accessories: - 2x Hainbuch chucks - Various tool holders (see pictures) - Breuer bar loader (1200mm) - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 [kW] - Spindle speed: 5,000 [rpm] - Max. bar diameter: 65 [mm] - Max. main spindle chuck diameter: 175 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 [kW] - Spindle speed: 7,000 [rpm] - Max. bar diameter: 42 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel range: 700 [mm] Bwedpfx Ajwm Igfsblsw LEFT UPPER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] RIGHT LOWER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 95 [kW] WEIGHT AND DIMENSIONS - Required space: 5,450 x 2,318 [mm] - Machine height: 2,258 [mm] - Machine weight: 10,000 [kg]

Sąlyga: geras (naudotas), Gamybos metai: 1989, 1 x automatic lathe Bodpfx Ajvga A Tebleww Traub TD 16 Year of manufacture: 1989 with hydraulic single bar feeder LNS Hydrobar 3.16 -HS 4.4 Year of manufacture: 1989 Equipment: 6-position star turret Quick-release collet system Long turning device Vogel central lubrication system Accessories: see photos The machine can be inspected under power.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 13 116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock/short turning mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Backworking unit Tool stations quantity 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Holder diameter mm 25 Sub spindle Max. spindle bore mm 20 Max. speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Bwodpfx Abswuddvolsw Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system base unit Pump pressure bar 3 / 8 Tank capacity l 250 Pump rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x Width x Height mm see layout plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNC65DGY, TX8H, Year 2001 • 2x 10-station turrets with live tooling drive VDI30 Bwodpjwi Izhjfx Ablew • C-axis on main and counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts list, wiring diagram, ATC sensor system Very good condition. Machine can be inspected under power. Machine geometry has been checked and adjusted/set.

Sąlyga: nepatikrintas (naudotas), Traub TNL 12/7 Bwedpfx Abevk Tl Njlsw

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1994, veikimo valandos: 8 000 h, Funkcionalumas: nepatikrintas, Machine in good condition. Bedpfxjv Im Sds Abloww

Sąlyga: naudotas, Gamybos metai: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power at 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power at 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power at 25% duty cycle: 5.8 kW Tool interface: DIN 69880 40 x 63 Total connected load: 95 kW Bwodpfx Abswp D Nbjlow Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m Equipped with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH clamping chucks Spanntop 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Sąlyga: naudotas, Gamybos metai: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm Control: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3150 rpm (2-step) Feed rate: 10,000 mm/min Tool turret - number of stations: 8 Operating hours (power-on hours): 8,834 h Tailstock quill taper: SK30 DIN 2080 Tailstock quill stroke: 105 mm Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions (LxWxH) approx.: 1.8 x 3.3 x 1.8 m Hydraulic system dimensions: 580 x 400 x 750 mm Bwjdpfju Rqabox Ablew Equipment: 200 mm hydraulic chuck (without jaws) Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Fine adjustment device for tool setting

Gamybos metai: 1978, Sąlyga: naudotas, Article: Program-controlled automatic lathe Brand: Traub Model: TF60 / 140 Bwedpfx Abol Rmqtjlsw Year of manufacture: 1978 Bar automatic lathe Please contact us for further information and images via email(at) or

Sąlyga: naudotas, Gamybos metai: 2011, veikimo valandos: 51 400 h, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of Manufacture: 2011 Control: TX 8i-s Main / Sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, new hydraulic pump Bjdpfx Abjwxc Hkjleww Extensive accessories: approx. 4 driven tool holders, 15 fixed tool holders Brief loader: Breuning Approx. 114,586 power-on hours Approx. 51,400 production hours Good condition Under power, available for inspection Delivery time approx. 2 weeks, by arrangement

Sąlyga: labai geros būklės (naudotas), Traub TNL12 CNC Swiss Talpa: 12 mm Darbo valandos: 25 596 val. Kraft & Bauer gaisro gesinimo sistema Popierinis filtras: kompaktiškas juostinis filtras Sukonfigūruota kaip parodyta nuotraukoje (daugiau nuotraukų vėliau) Eksploatuojama nuo 2009 m. (pradžioje demonstracinis modelis) Bwedpfjw R E Adex Ablew 12 pėdų FMB strypų padavėjas Miglos surinkėjas Drožlių transporteris „Yra 2 staklės“

Sąlyga: naudotas, Gamybos metai: 1993, Techninė informacija: x eiga: 400 mm y eiga: 300 mm z eiga: 400 mm Veleno greitis: 8000 aps./min Valdymas: Fanuc OM Tvirtinimo stalas: 500x300 mm Žurnalų vietų skaičius: 16 vnt. Įrankio tvirtinimas: SK40 Atstumas tarp darbinio veleno ir tvirtinimo paviršiaus maks.: 50-450 mm Bwedpfsu Idn Hex Ablew Padėklų kiekis: 2 vnt./detalė Bendras galios poreikis: 10 kW Mašinos svoris apytiksliai: 2,5 t Mašinos matmenys (IxPxA): 2,4x1,8x2,5 m Transportavimo matmenys: 2,45x1,8x2,5 m - Elektros spinta - Aušinimo įranga - Drožlių transporterio gamintojas META (transportavimo aukštis 1500 mm; plotis 200 mm) Stalo keitimo funkcija neveikia.

Sąlyga: geras (naudotas), Gamybos metai: 2007, Traub TNX 65/42 Centro di tornitura e fresatura Anno di costruzione: 2007 N. di serie: 7060107 Entrata in servizio: 2010 Controllo TX 8i-S (controllo basato su Mitsubishi/Traub con motori e azionamenti Mitsubishi) 15 assi CNC 4 torrette X-Y-Z ciascuna con 10 posizioni. Fino a 20 utensili per torretta Mandrino principale e contromandrino con foro passante da 65 mm (contromandrino con lavaggio refrigerante) Comando a pedale per serraggio/sgancio dei mandrini Ricevitore portale azionato da servomotore Sistema di rotazione idraulica con pinza pneumatica per pezzo finito e residuo barra Nastro trasportatore per pezzi finiti Filtro refrigerante a nastro cartaceo RESY Vasca del refrigerante Knoll con controllo della temperatura mediante gruppo frigorifero BKW Pompe del refrigerante ad alta pressione 20 bar e a bassa pressione 8 bar Evacuatore trucioli Knoll Caricatore di barre FMB Turbo 5-55 (nuovo del 2010) 2 portautensili tornitura singoli 2 portautensili tornitura doppi 1 portautensile di troncatura 1 portautensile motorizzato doppio radiale ER portapinza 1 portautensile motorizzato radiale ER portapinza Bwodpfx Absq Npqmjlew 4 portautensili motorizzati radiali ER portapinza 1 portautensile motorizzato radiale porta frese cilindriche 1 portautensile motorizzato radiale ER portapinza orientabile 2 portautensili motorizzati radiali porta frese a disco 2 portautensili motorizzati assiali porta frese cilindriche 6 portautensili motorizzati assiali ER portapinza 43 ulteriori portautensili su elenco separato (vedi allegato supplementare) Mandrino principale Hainbuch con autocentrante portapinza Contromandrino Rohm autocentrante a 2 griffe 2 set di viti a ricircolo di sfere asse Z e pacchi cuscinetti di ricambio

Sąlyga: naudotas, Gamybos metai: 1987, Technical details: Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel (Z-axis): 168 mm Control: Traub TX8D Spindle speed: 20 – 4000 rpm Spindle bore: Ø 60 mm Operating hours (power-on hours): 23,495 h Tool turret: 12 tools Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. LxWxH: 3.6 x 2.5 x 2.2 m Bedpfou Ix N Sjx Abljww Tool holder: cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Röhm power chuck Ø 200 mm, hydraulic clamping Operation via dual foot switch and control panel/operator panel. Coolant system The Traub features an integrated chip conveyor with an ejection height of 1,100 mm (currently non-functional). Accessories: various small parts 8 assorted leveling feet without tailstock as is.