Ratų Montavimo Staklės pirkti naudotą (56 792)

Gamybos metai: 1951, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Kdsdpodcdrpofx Af Ieg Machine No.: 1133 General / Technical Data: Hydraulic horizontal broaching machine, in good, operational condition Broaching stroke: 1500 mm Broaching stations: 1 unit Tensile force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm width Thru-hole in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by the oil and chip tray) Cutting speed: hydraulically continuously adjustable from 2 m/min to 7 m/min Return speed: hydraulically continuously adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special Features: • The machine is equipped with a universal pull head for flat shanks • The machine includes an integrated coolant-lubrication system • The machine has an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for producing keyways and profiles. The machine runs smoothly and is clean in the area of the guides and cylinder. On request, broaching needles as well as broaching mandrels can be supplied. The machine is available for demonstration under power in our warehouse.

Gamybos metai: 1980, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25 x 2500 x 500 Year of Manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic broaching machine with 3 broaching stations, in very good condition Pulling force: 25,000 kg Broaching length: 2,000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping diameter of draw heads: 3 x Ø 100 mm Kjdpsdffzfefx Af Isdg Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connection rating: 380V / 50 Hz / 22 kW Accessories / Special Equipment: The machine is currently supplied without a workpiece table. Previously, a sliding workpiece table was mounted on the machine, equipped with a special external broaching clamping device (workpiece sliding table can be modified). The tool clamping system is equipped with a hydraulic lock both in the draw bridge and the feeder. The machine is fitted with a coolant unit including integrated chip conveyor. Remarks: The machine is in very good condition and retains its original paint. It is designed for use in series production, ideally requiring a foundation (pit) for optimal operation. Draw heads and ejector needles are available on request. The machine can be inspected in our warehouse.

Gamybos metai: 1962, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine No.: 1790 General / Technical Data: Hydraulic horizontal internal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Ksdpfx Aedl Uzkjf Iodg Broaching tool clamping: Universal pull head for flat shanks Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by oil and chip tray) Cutting speed: hydraulically adjustable, stepless from 1 m/min to 7 m/min Return speed: hydraulically adjustable, stepless from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without working area) Power supply: 380 V / 50 Hz / 15 A Hydraulic motor: 4 kW Accessories / Special Features: • The machine is equipped with a universal pull head for flat shanks • Refrigerant / lubrication system • Without tool feeder • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for manufacturing keyway slots. On request, broaching needles and mandrels can also be supplied. The machine is connected and ready for demonstration under power in our warehouse.

Gamybos metai: 1958, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2,500 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 1 broaching station, fully operational. Tensile force: 6,000 kg Broaching length: 1,000 mm Draw head diameter: Ø 85 mm Passage width between cylinders: max. 280 mm Cutting speed: hydraulically variable, stepless from 1 m/min up to max. 7 m/min Return speed: hydraulically variable, stepless from 7 m/min up to max. 25 m/min Machine dimensions (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / Connected load: 380 Volt, 50 Hz / 4 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 1 broaching station. The tool clamping system is designed for mechanical spring locking (DIN 1415). An integrated coolant system is included. The machine features a double draw head for two flat broaching tools with workpiece support plate. Kodsda Ugispfx Af Iodg Remarks: The machine is in age-appropriate good condition and ready for immediate use. It is designed for manual operation in medium-batch production. Installation ideally requires a machine pit or, alternatively, a platform. Draw heads are available on request. The machine does not have a tool loader. The machine can be inspected under power at our warehouse.

Gamybos metai: 1955, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1331, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1955 Weight: approx. 2950 kg Machine No.: 1331 Kdodpfx Ajdbr H Tsf Ieg General / Technical Data: Hydraulic horizontal internal broaching machine in good, ready-for-operation condition Broaching length: 1500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: universal draw head for flat shanks up to 26 mm width Through bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by oil and chip tray) Cutting speed: hydraulically and infinitely adjustable from 1 m/min to 7 m/min Return speed: hydraulically and infinitely adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (excluding working area) Power supply / connected load: 380 V 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special Equipment: • The machine is equipped with a universal draw head for flat shanks • The machine features a movable coolant/lubricant system for two media • The machine includes an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for manufacturing keyways and profiles. It runs smoothly and is very clean in the guide and cylinder areas. Broaching needles as well as mandrels can be supplied upon request. The machine is connected and available for inspection and demonstration at our warehouse.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1970, Krumplysavimo staklės ZFWZ 6300x40 Gamintojas: WMW-MODUL Modelis: ZFWZ 6300x40/1 Pagaminimo metai: 1970 Didžiausias ratų skersmuo: 7100 mm Krumplių plotis: 1500 mm Didžiausias modulis: 45 Stalo skersmuo: 5300 mm Frezuotuvo skersmuo x plotis: 400x500 mm Didžiausias spiralinio kampas: 45 laipsniai Frezuotuvo skersmuo: 500 mm Frezuotuvo apsukos: 9-63 aps./min. Bendras galios poreikis: 47 kW Staklių svoris: 160 t Kodpexln Iwjfx Af Ijdg Komplektuojama su standartine frezavimo galva, tangentiniu krumpliaračiu, vidaus frezavimo galva, keičiamais krumpliaračiais, atramomis. Galimas vaizdo įrašas.

Sąlyga: naudotas, used, top condition, low hours Kdsdovwf Dqjpfx Af Iog Manufacturer: Hettich Model: Blue Max mini PM Pneumatic drilling feed Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition as inspected, without warranty or guarantee

Sąlyga: geras (naudotas), Gamybos metai: 1991, Manufacturer: Urpe Model: M200G Year of manufacture: 1991 Stroke: 0–200 mm Table: 650 x 220 mm Tilting ram: 0–30° Specifications Metric / US Standard There are (currently) no specifications available for this machine. Dimensions (approximate) There are (currently) no dimensions available for this machine. Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are created. We recommend verifying all key details independently. Kdjdpewp Nfnofx Af Isg

Sąlyga: geras (naudotas), Manufacturer: STANKO Model: 7D430 Year of manufacture: 1994 Table rotation: 360° Head tilting up to 10° possible Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Specifications Metric / US Standard Table diameter Ø: 630 mm Table load capacity: 1000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Outreach: 500 mm Number of strokes: 3 – 38 strokes/min Power: 12 kW Dimensions (approximate): Length: 3000 mm Width: 2200 mm Height: 3000 mm Weight: 6150 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details. Kdedewpud Aopfx Af Isg

Sąlyga: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2,400 kg Fully automatic hobbing machines for worm gear cutting Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. wheel diameter without parts magazine approx. 80 mm Max. wheel diameter with parts magazine approx. 50 mm Max. module 2 / 2.5 Axial cutting length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter – diameter 24 – 50/63 mm Max. radial travel of the milling slide 0–14/18 mm Max. milling cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed rate stepless 0.05 – 4.0 mm/rot. Ksdot Hw D Rspfx Af Iodg Radial feed rate stepless 0.2 – 200 mm/min. Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter, program numbering, and 30-position digital error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and then inserted into the loading unit. The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power. Machine is set up for cutting worm shafts/armature shafts used in variable transmissions for automotive seat adjusters, window regulators, etc.

Sąlyga: naudotas, Gamybos metai: 1977, Wheel diameter - max. 400 mm Wheel width 280 mm Module - max. 4 Module - min. 1 Total connected load 15 kW Machine weight approx. 6000 kg Space requirement approx. ... m LORENZ Universal Gear Hobbing Machine Type F 400 Year of manufacture 1977 S/N 8687 _____ Min./max. wheel diameter 400 mm Module range 1 - 4 Number of teeth approx. 8 – 210 Milling width approx. 280 mm Max. workpiece installation length approx. 450 mm Milling slide swiveling up to 60° Cutter size (diameter x length) 160 x 220 mm Cutter shifting max. 180 mm Cutter speeds 125-500 rpm Table diameter x bore 375 x 80 mm Feed range: axial 0.31 - 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Milling spindle drive approx. 8 kW Total drive power approx. max. 15 kW - 380 V - 50 Hz Weight approx. 6,000 kg Accessories / Special features • Multiple milling programs selectable for climb and conventional milling, Kodpfx Aet Hw Hxef Iodg as well as for radial/axial milling processes, possibly worm gear milling • Universal milling head with cutter shifting • Hydraulic workpiece clamping on table and hydraulic tailstock • Hydraulically folding counter-holder connection for easier loading • Differential for helical gearing • Infinitely variable speed control, display for speed and amperage • Change gears, various accessories, coolant system * Very robust construction Condition: good – will be demonstrated shortly Delivery: ex stock – as inspected Payment: upon receipt of invoice, strictly net

Sąlyga: naudotas, Gamybos metai: 1995, Wheel diameter - max. 80 mm Wheel width 120 mm Module - max. 3 Module - min. 1 Control: SIEMENS 840 C Total power requirement: 30 kW Machine weight approx. 7,500 kg Footprint approx. [space missing] m LIEBHERR CNC-controlled gear hobbing machine Type: LC 82 Year of manufacture: 1995 # 0836 --- Wheel diameter max. 80 mm Module 1 – 3 Helix angle +/- 45° Distance table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shift range/tool traverse: 180 mm Min. number of teeth: 3 Cutter Ø x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feeds in axial/radial/tangential: 20/4/5 mm/rev Max. workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW - 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special equipment: • SIEMENS CNC control type 840 C for 6 axes (i.e. cutter drive/Table drive/Swivel angle of the milling head/axial feed/radial feed/tangential feed) with gear-specific user interface and diagnostic functions for rapid troubleshooting. • With device for automatic insertion of the hob into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading unit SSL = quick swivel loader using a mechanical step transmission and cam disk for fast loading times, with 3-way rotary gripper for blank gripping/working position/unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinions) • Workpiece feeding by means of plate chain conveyor (PKB) for workpieces with positive-fit carrier. Additional feed belt for raw and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete working area enclosure with sliding door and oil mist extraction, etc. The machine can also be used for dry gear cutting. Ksdpfx Ajt Hw R Djf Ijdg Condition: satisfactory to good – under power and ready for demonstration, compact design! Delivery: ex-stock – as inspected Payment: net cash – on receipt of invoice

Sąlyga: naudotas, Gamybos metai: 1980, Wheel diameter - max. 1010 mm Wheel width 0 mm Module - max. Module - min. Total power requirement 15 kW Machine weight approx. 9.5 t Space requirement approx. m G L E A S O N (USA) "CURVIC-Coupling" - Automatic Coupling Grinding Machine Type 120 (888), Year of manufacture 1980 Serial no. 763402 Max. tooth height 10 mm Max. swing diameter of workpiece 1,010 mm Max. outside diameter of CURVIC teeth 610 mm Retraction of workpiece slide plate 216 mm Max. distance grinding wheel to workpiece nose 90-430 mm Max. workpiece weight incl. clamping device approx. 500 kg Number of teeth range 32 - 150 Grinding wheel diameter approx. 152 - 320 mm Grinding wheel speed, stepless 0 - 3,600 RPM Workpiece spindle bore 60 mm Total drive power approx. 15 kW - 380 V - 50 Hz Weight approx. 9,500 kg Accessories / Special equipment: Kjdpfxot Hwnis Af Ijdg Automatic rough grinding and finish grinding by means of presettable counters and integrated feed curves Counter for number of teeth Counter for number of dressing cycles 2 mounted dressers with 3 dressing diamonds for external dressing, internal dressing, and dressing wheel tip Mounted index plate for 48 teeth Separate coolant unit with band filter, separate hydraulic system Freestanding oil mist extraction unit by TRION, various small parts

Sąlyga: naudotas, Gamybos metai: 1977, Grinding diameter - max. 400 mm Grinding width 0 mm Module - max. Module - min. Total power requirement 3 kW Machine weight approx. 4.2 t Space requirement approx. m Dressing wheel - Ø min./max. 64 - 320 mm Grindable module size 1 - 12 Modul Max. dressing wheel width 40 mm Number of teeth 13 - 240 Roller diameter 73 - 320 mm Workpiece slide speed 5 - 20 - 30 - 40 teeth/minute Grinding wheel speed 690 rpm Grinding wheel diameter 762 mm Grinding wheel swivel (contact angle) 5-21° Grinding slide swivel (helix angle) 2x 35° Grinding slide vertical adjustment 240 mm Dresser speed 1/0.5/0.25 m/minute Grinding spindle drive / total drive 1.1 / 3 kW - 380 V - 50 Hz Weight approx. 4,200 kg Accessories / Special equipment: Kdsdpet Hwnvjfx Af Iog The machine is suitable for grinding external and internal rack wheels as well as for grinding master gears or cutter wheels for gear shaping machines. Unfortunately, no further accessories are available for the machine, so it is an investment as a secondary machine if suitable accessories are already available.

Sąlyga: naudotas, Gamybos metai: 1997, Wheel diameter - max. 215 mm Wheel width 40.65 mm Module - max. Total power requirement 20 kW Machine weight approx. 10 t G L E A S O N (USA) CNC Grinding Machine for Spiral and Hypoid Bevel Gears Model PHOENIX HG 200 Year of construction 1997 Max. external diameter of workpiece: 215 mm Tooth profile size (height x width): 16 mm x 40.65 mm Number of teeth: 5 - 200 Maximum gear ratio: 1 : 10 Grinding wheel diameter: 51-190 mm Grinding wheel speed: 1,000 – 6,000 rpm X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (sliding base): 304 mm Distance machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0-30 rpm Workpiece spindle bore, tapered: 3 29/32 inches Total drive approx.: 20 kW - 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special equipment: • FANUC – 7-axis CNC control type 150 MB with monitor and direct data entry, automatic calculation of all workpiece and grinding parameters • Large, sophisticated coolant system with filtration, band filter, etc. • Powered grinding wheel dressing device with CNC-controlled compensation for wheel form and diameter after each dressing cycle Kdjdpfjt Hwxhsx Af Iog • Gear grinding can be performed either as single part processing with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. Grinding wheels can be made of CBN or conventional “dressable” aluminium oxide, depending on cost. Grinding with a conical wheel provides advantages in terms of heat management and contact pattern quality. Therefore, these bevel gear sets (automotive industry) can be manufactured in high quality, with consistent accuracy, cost-efficiently, and with short setup times. Please refer to the brochure copy on our website for additional details. Condition : very good – can be demonstrated under power Delivery : ex stock - as inspected Payment : strictly net – upon receipt of invoice We look forward to your order. Further gear manufacturing machines always in stock. X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (sliding base): 304 mm Distance machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0-30 rpm Workpiece spindle bore, tapered: 3 29/32 inches Total drive approx.: 20 kW - 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special equipment: - FANUC – 7-axis CNC control type 150 MB with monitor and direct data input, automatic calculation of all workpiece and grinding parameters - Large, sophisticated coolant system with filtration, band filter, etc. - Powered grinding wheel dressing unit with CNC dressing control for automatic form and diameter compensation after each dressing - Gear grinding can be performed either as single part processing with a conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made of CBN or conventional dressable aluminum oxide wheels (cost dependent). Grinding with a conical grinding wheel...

Sąlyga: naudotas, Gamybos metai: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. (not specified) Total power requirement 20 kW Machine weight approx. 6 t Space requirement approx. (not specified) CNC-controlled horizontal hobbing machine with workpiece portal loader, model A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter with automatic loading max. 150 mm Workpiece diameter with manual loading max. 200 mm Max. workpiece length approx. 400 mm Axial milling length (Z axis) 300 mm Module range for HSS/Carbide cutters 3 / 4.5 mm Number of teeth min./max. 2–999 Centre distance tool–workpiece min./max. 0–190 mm Workpiece rotation speed max. 0–350 rpm Milling slide swiveling left/right 50 / 60° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y axis) 100 mm Radial slide travel max. (X axis) 10–150 mm Tailstock travel max. (W axis) 420 mm Cutter speed stepless 0–1,500 rpm Feed range on all axes steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total power approx. 20 kW – 220 V/400 V / 50 Hz Weight approx. 6,000 kg Ksdpfx Afot Hwxbj Ijdg Accessories / Special Equipment: MIKRON CNC control type 788 (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with conversational programming for creating various gearing cycles, such as helical gearing, worm and worm wheel gearing, crowned gears, with and without shifting, as well as further subprograms. Heavy duty shifting milling head with high cutter speeds and long shifting path, also for 2 cutters, with quick-change system and hydraulic counterbearing. Workpiece spindle head (C) with quick-change system (collet chuck) Heavy tailstock with 420 mm travel (W), in combination with an automatic workpiece loading device from GÜDEL Switzerland with a linear portal loader (approx. 1000 mm stroke (V)), swiveling double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm length x 25 mm Ø x module 1.5), however, without workpiece storage device. Separate coolant unit with magnetic chip conveyor Enclosed full machine guarding with sliding doors 2 machines with workpiece marking devices by BORRIES, unfortunately otherwise without accessories.

Sąlyga: naudotas, Gamybos metai: 2001, Celaschi squaring machine, consisting of 2 single-side machines (right + left), type TA, model 20-MCI, year 2001 (CE compliant), equipped with 2 milling units per side, used. Workpiece dimensions: min/max width: 60/160 mm min/max length: 350/1400 mm min/max thickness: 13/23 mm Kodpfx Afsk N I Nbo Iodg

Sąlyga: naudotas, Wigo Double-Sided Squaring Machine with 3 Units per Side, complete with Inverters. - Circular saws on right and left - Spindle moulders on right and left - Spindle moulders on right and left Kdsdpsummldsfx Af Iog Maximum working width: 1500 mm Motor power: Circular saws: 3 kW x2 Spindle moulders: 5.5 kW x2 Rotary sanders: 5.5 kW x2 Feed motor: 4 kW Shoulder width adjustment motor: 3 kW

Gamybos metai: 1993, Sąlyga: paruoštas naudoti (naudotas), Automatische Schleifmaschine VIET Modell Rita 4C EL Festes Tischband, bewegliche Aggregate Arbeitsbreite: 1350 mm Arbeitshöhe: 4–160 mm Nr. 03 Absaughauben, Durchmesser 150 mm Transportbandgeschwindigkeit: 6–20 m/min mit 3 kW Frequenzumrichter Bürste zur Teppichreinigung in der Haube, Durchmesser 120 mm Ausstattung: 1. Querpolieraggregat Mod. TET 60, elektronisch gesteuertes Pad mit 60 Sektoren Lamellenband: 6150 x 140 mm Eigenes Schleifmittel: 8350 x 170 mm Bandgeschwindigkeit: 5,6–26,2 m/s Frequenzumrichter: 15 kW Drei Absaughauben, Durchmesser 140 mm 2. Walzenschleifaggregat Mod. R320 – 40, Gummibeschichtung 40° Shore Schleifband: 3250 x 1400 mm Geschwindigkeit: 1,5–12,5 m/s Frequenzumrichter: 15 kW Bandreinigungsgebläse Zwei Absaughauben mit 140 mm Durchmesser, eine mit 200 mm Durchmesser 3. Polieraggregat (Puffer) Mod. TE 60, elektronisch gesteuertes Pad mit 60 Sektoren Schleifband: 3250 x 1400 mm Geschwindigkeit: 2,9–14,1 m/s Frequenzumrichter: 15 kW Bandreinigungsgebläse Zwei Absaughauben mit 140 mm Durchmesser, eine mit 200 mm Durchmesser Kjdpfx Aoltlx Tef Iodg 4. Querschleifaggregat Mod. TET 60, elektronisch gesteuertes Pad mit 60 Sektoren Lamellenband: 6150 x 140 mm Eigenes Schleifmittel: 8350 x 170 mm Bandgeschwindigkeit: 5,6–26,2 m/s Frequenzumrichter: 15 kW Drei Absaughauben, Durchmesser 140 mm 5. Scotch-Brite-Aggregat Motorleistung: 0,55 kW Absaughaube Durchmesser 140 mm 6. Bürstenaggregat Motorleistung: 0,55 kW Absaughaube Durchmesser 140 mm 7. Plattenreinigungs-Rotorgebläse-Aggregat

Sąlyga: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 986003, šlifavimo rato greitis: 6 000 aps./min, įrankio skersmuo: 230 mm, X ašies eiga: 325 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 470 mm, TECHNICAL DETAILS Maximum transmission ratio: 10:1 Number of teeth: 3 - 200 Ksdpfx Afev Rcn Ho Iodg Tooth height: 20 mm Maximum tooth width: 58 mm Control system: SIN 840 D SIEMENS Axes X-axis: 325 mm Y-axis: 350 mm Z-axis: 470 mm B-axis: +90.1° / -1° Spindle Grinding spindle speed: stepless up to 6,000 rpm Workpiece spindle speed: 1,200 rpm Tooling Maximum tool diameter: 230 mm Minimum tool diameter: 69.85 mm Table diameter: 212.71 mm MACHINE DETAILS Total connected load: 75 kW Machine weight: approx. 10,000 kg Required floor space: approx. 6.10 m x 4.40 m x 3.30 m Transport dimensions machine: 4 x 2.5 x 2.85 m / 11 t Transport dimensions coolant tank: 3.55 x 2.41 x 2.5 m / 1.8 t Transport dimensions cooler: 1.5 x 0.8 x 1.1 m / 0.2 t Transport dimensions sheet metal: 2.5 x 1.1 x 0.8 m / 0.25 t EQUIPMENT - Coolant filtration unit Hoffmann HSF 100 V

Sąlyga: naudotas, Gamybos metai: 2005, Maximum transmission ratio: 10:1 Number of teeth - min.: 3 Number of teeth - max.: 200 Tooth height: 20 mm Tool diameter min.: 69.85 mm Max. tooth width: 58 mm Tool diameter max.: 230 mm X-axis: 325 mm Y-axis: 350 mm Z-axis: 470 mm Workpiece table - Ø 212.71 mm B-axis: +90.1 / -1° Control: SIN 840 D SIEMENS Total power requirement: 75 kW Machine weight approx.: 10,000 kg Space requirement approx.: 6.10 x 4.40 x 3.30 m WAGURI Kedpjvxwgmsfx Af Iedg with EWAB loading cell, year of manufacture 2012 (Linear loader) No coolant filtration system available

Sąlyga: naudotas, Gamybos metai: 2007, Maximum transmission ratio: 10:1 Number of teeth - min.: 3 Number of teeth - max.: 200 Tooth height: 20 mm Maximum tooth width: 58 mm Minimum tool diameter: 69.85 mm Maximum tool diameter: 230 mm X-axis travel: 325 mm Y-axis travel: 350 mm Z-axis travel: 470 mm Workpiece table diameter: 212.71 mm Kdedpfx Aovxwnqjf Ijg B-axis: +90.1° / -1° Control: FANUC 160 i - MB Total power requirement: 75 kW Machine weight: approx. 10,000 kg Space requirement: approx. 6.10 x 4.40 x 3.30 m WAGURI With EWAB robot cell (KUKA robot) Without coolant filtration system Fire extinguishing system without CO2 cylinders Cooling oil recirculation with various pumps / catchment basin Threading unit for A1/B2 axes with measuring probe Clamping device for a pinion shaft External spindle oil cooler Extraction system for "pinion shaft"

Sąlyga: naudotas, Gamybos metai: 2002, Wheel diameter - max. 275 mm Module - max. 6 Module - min. 1.5 Control system: SINUMERIK 840 C Gear width: 5.5 mm Helix angle min. 0° / max. 60° Number of teeth - max. 120 Number of teeth - min. 5 Gear ratio max. 1:10 Gear ratio min. 1:1 Workpiece spindle speed max. 110 rpm Cutter head speeds: 20 - 110 rpm Total connected load: 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.20 x 2.30 x 2.40 m Integrated deburring unit, U-axis / Q-spindle Chip conveyor Coolant system Electrostatic air cleaner: ELBARON No tools included No workpiece clamping device Kedpfxovxwnwj Af Isdg

Sąlyga: naudotas, Gamybos metai: 2006, Maximum transmission ratio: 10:1 Number of teeth - min. 3 Number of teeth - max. 200 Tooth height: 20 mm Max. tooth width: 58 mm Continuously variable grinding spindle speed: 6,000 rpm Workpiece spindle speed: 1,200 rpm Max. tool diameter: 230 mm Min. tool diameter: 69.85 mm X-axis: 325 mm Y-axis: 350 mm Z-axis: 470 mm B-axis: +90.1 / -1° Workpiece table - Ø 212.71 mm CNC control: SINUMERIK 840 D SIEMENS Total power requirement: 75 kW Machine weight: approx. 10,000 kg Kdodpevxwr Asfx Af Ijg Space requirement: approx. 6.10 x 4.40 x 3.30 m Coolant filtration system: Hoffmann HSF 100 V

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 110 aps./min, ratlankio skersmuo: 275 mm, TECHNICAL DETAILS Max. Wheel Diameter: 275 mm Kodsv Rc Sropfx Af Iedg Module Range: min. 1.5 / max. 6 Face Width: 5.5 mm Spiral Angle: min. 0° / max. 60° Number of Teeth: min. 5 / max. 120 Gear Ratio: min. 1:1 / max. 1:10 Drive & Control Control System: SINUMERIK 840 C Max. Workpiece Spindle Speed: 110 rpm Cutter Head Speeds: 20 – 110 rpm Total Power Requirement: 100 kW Machine Weight & Dimensions Machine Weight: approx. 16.7 t Space Requirement: approx. 5,200 x 2,300 x 2,400 mm EQUIPMENT - Deburring device U-axis / Q-spindle - Chip conveyor - Coolant system - Electrostatic Air Cleaner ELBARON - No tools and no workpiece clamping device included