Lakštinio metalo pašalinimo (gratavimo) staklės / pašalinimo staklės

NS Maquinas DM 1100 C

Sąlyga: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Laedpfjd Ixadox Ad Tji Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Sąlyga: geras (naudotas), Gamybos metai: 1997, mašinos/transporto priemonės numeris: 887043, Offer 24557 Technical Data: Lajdju T Nknopfx Ad Toi - Max. working length: 4060 mm - Frame gap: 3680 mm - Max. pressing force: 1700 kN - Max. distance table / ram: 385 mm - Throat depth: 410 mm - Ram stroke: 215 mm - Stroke speeds - Downward rapid traverse speed: max. 200 mm/sec - Upward speed: 135 mm/sec - Pressing speed downward: 1 to 11 mm/sec - Total drive power: 30 kW - Space requirement: approx. W 5600 x H 3000 x D 2400 mm - Weight: approx. 18,000 kg Features: - Equipped with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping - Pneumatically assisted die table shifting

Sąlyga: naujas, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts. NEW DESIGN – CAN BE VIEWED UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm in a SINGLE PASS. The first station processes the workpieces from below using two counter-rotating cross belts, while the second station works from above, also with two counter-rotating cross belts. The cross belts allow deburring of both inner and outer edges of the workpieces. Sharp edges produced during laser cutting, punching, or shearing of steel, stainless steel, and aluminum parts are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its capability to process small parts from 50 mm. By folding up a table, the rotating direction of the upper conveyor automatically reverses, and the gap of the first processing station is bridged, enabling the workpieces to feed directly into the second processing station. Thus, small products measuring from 50 mm up to 150 mm can be processed on one side only. An additional benefit of this machine is the ability to round parts with protective surface film without damaging the film. Easy and tool-free cross belt change. The program for automatic positioning of the upper and lower belts ensures good accessibility and reduces changeover times. User-friendly operation via integrated touch screen. This machine is also available with a return transport system upon request. Technical data: Working capacity (Ø mm) 1100x50 Number of cross-belt stations 2 Cross-belt speed (m/s) 2–8 Feed speed (m/s) 0.6–3.2 Cross-belt motor (kW) (4x) 3 Lajded Ev Upepfx Ad Tei Feed motor (kW) (3x) 0.18 Total power (kW) 13.1 Power consumption (A) 30 Extraction connection per head (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Sąlyga: naujas, DM1100 C Edge Rounding Machine for Laser-, Flame- and Punched Parts The DM1100 C performs edge rounding and simultaneously removes sharp burrs from both the inner and outer edges of steel, stainless steel, or aluminium parts after laser cutting, shearing, or punching. The DM1100 C is equipped with double, counter-rotating cross belts with abrasive blocks to uniformly round all edges of the entire product. A major benefit of this machine is the deburring of products with surface protection film, without damaging the film – only the edges are processed. Laodpsd Evcwsfx Ad Tji Excellent processing of parts in a wide range of sizes, from small parts starting at 50 x 50 mm up to 1100 mm. Technical Data – DM1100 C: Working capacity (Ø mm): 1100x50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): 3 Feed motor (kW): 0.18 Total power (kW): 6.2 Current consumption (A): 13 Extraction connection per head (Ø mm): 100 Dimensions (mm): 2270x1560x1940 Weight (kg): 1200

Gamybos metai: 2000, Sąlyga: paruoštas naudoti (naudotas), Makino EU 64 Wire EDM Machine X = 600 mm Y = 400 mm Z = 260 mm Maximum workpiece dimensions (W x D x H): 940 x 650 x 260 mm Maximum workpiece weight: 1,500 kg Service required before commissioning! Lsdpfxjgwp Eqs Ad Tjai The current Makino service report can be provided upon request.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 000 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 800 mm, stalo plotis: 700 mm, stalo ilgis: 2 000 mm, Control: HEIDENHAIN TNC-426 X-axis travel: 2000 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Taper: ISO 50 Speed range: 20 - 3000 rpm Lajdpfxevfr Hbe Ad Tsi Spindle power: 17 kW

Sąlyga: geras (naudotas), Gamybos metai: 2007, - SIEMENS 840 D control system - Bar passage: 65 mm - Main and sub-spindle, max. speed 5,000 rpm - C-axis, Y-axis - 3 turrets with 12 stations each (all driven) - Driven tool speed: 4,000 rpm - Tool holder: VDI 30 with drive DIN 5480 TRAVEL PATHS X1 = 165 mm, Z1 = 220 mm X2 = 165 mm, Z2 = 150 mm X3 = 165 mm, Z3 = 650 mm, Y3 = 80 mm (+50/-30) Laodpfx Ajuw Izvsd Tsi ACCESSORIES Coolant system Chip conveyor Bar loader TOP Automazioni XF 375

Sąlyga: naujas, X ašies eiga: 5 000 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 1 500 mm, greitas poslinkis X ašimi: 30 000 m/min, greitas poslinkis Y ašis: 30 000 m/min, greitasis eiga Z ašyje: 30 000 m/min, frezos galvos padėtis: Universal-Diagonal-Fräskopf, veleno greitis (maks.): 6 000 aps./min, stalo plotis: 1 100 mm, stalo apkrova: 14 000 kg, stalo ilgis: 5 100 mm, bendras svoris: 35 000 kg, sukimo momentas: 1 178 Nm, ašies variklio galia: 53 W, Įranga: sūkių greitis be galo kintamas, VISIŠKAI NAUJAS STALINIS FREZAVIMO STAKLĖS Valdymas ir varikliai: Lajdpfsq Ixh Hjx Ad Tsi HEIDENHAIN TNC 640 skaitmeninė valdymo sistema HEIDENHAIN paketas (varikliai, matavimo sistemos ir rankenėlė) IKZ: Vidinis aušinimo skysčio tiekimas – 36 bar Papildoma įranga: Standartinis įrankių keitiklis su dvigubu griebtuvu, 40 padėčių Dvigubas šarnyrinių juostų drožlių transporteris (išilginis), vienas priekyje ir vienas gale 4-osios ašies paruošimas (apskritas stalas) Perimetrinė apsauga Tikslumai: Pozicionavimo tikslumas: 0,025 mm Kartojimo tikslumas: 0,008 mm Atsakome tik į užklausas iš Vokietijos // Nur Anfragen aus Deutschland werden bearbeitet

Sąlyga: naujas, Table height: 650 - 1050 mm Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Lsdofk Aifspfx Ad Tjai Table width: 1230 mm Table length: 2480 mm Weight approx.: 733 kg This allows the user to flexibly adjust the working surface height according to requirements, enhancing productivity and ergonomics. Height adjustment is standardly achieved via a manual hydraulic system within a range of 650 to 1050 mm (other heights available on request). Like the SST fix series, the worktop features a 100 x 100 mm grid of Ø 28 mm holes. When used in combination with processing machines, test or post-processing fixtures (deburring, marking, checking) can be adjusted to match the clamping table height of the respective machine. The table systems can be easily relocated on site using a pallet truck. These mobile systems, with their various fastening and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the work surface can be cost-effectively replaced if worn in the future. Price must be confirmed with the manufacturer before ordering! For accessories and further information, please follow this link:

Sąlyga: visiškai atnaujintas (naudotas), Portal Straightening Press Pressing Force: 450 t Stroke: 50 mm Daylight Opening: 1000 mm Working Area: - Length: 5200 mm - Width: 2300 mm Ljdpfsfcnu Isx Ad Teai - Height: 1000 mm Weight: 45,000 kg Screw Distance (Left-Right): 1000 mm