Vidaus Ciklinės Šlifavimo Staklės pirkti naudotą (57 605)

Sąlyga: naudotas, Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3520.17.137, Tripet TST201CNC no. 3520.17.137, year of manufacture 1987 Gsdpfxjwffmme Abdjbg Power kW: 76

Sąlyga: naudotas, Gamybos metai: 1989, Centų aukštis 250 mm Atstumas tarp centrų 600 mm Matmenys (ilgis/plotis/aukštis): 3600 x 1900 x 2100 mm Staklių svoris apie 2,25 t Gbsdpfsxzuzcex Abdsg

Sąlyga: labai geros būklės (naudotas), Vidinis skersmuo: 5-200 mm Šlifavimo gylis: 230 mm Apskritimo skersmuo: 50 mm Centro aukštis: 180 mm Šlifavimo skersmuo - vidinis: 5 - 200 mm Veleno anga: 50 mm Darbo ruošinio veleno apsukos: 120 - 1000 aps./min Pakrypimas: 90° Stalo judėjimas frezavimo režime automatiškai: 3 - 600 mm/min Veleno apsukos: 3600 - 40000 aps./min Veleno skersmuo: 90 mm Bendras galios poreikis: 10 kW Staklių svoris: apie 2,6 t Gbsdpfxox Rrvrj Abdeg Reikalinga erdvė: apie 3,1 x 1,6 x 1,8 m Centrai: vidiniai, išoriniai, plokšti

Sąlyga: naudotas, Gamybos metai: 1983, Technical Details: Internal diameter: 140 mm Total power requirement: 5.5 kW Approx. machine weight: 1.8 t Required space approx.: 2.8 x 2.5 m Max. workpiece weight: 15 kg Max. clamping diameter: 140 mm Clamping length: 250 mm Max. bore diameter for grinding: 0.8–90 mm Small/large max. grindable bore: 160 mm Centre height: 90 mm Workpiece spindle, stepless: 112–1000 rpm Gbedpfxjr R Elho Abdeg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, bendras ilgis: 620 mm, Mechanics: Godpfsurw Uyjx Abdebg All wear parts of the machine are replaced, including the feed spindle on the X-axis. All assemblies are restored to a like-new condition. After the overhaul, the machine is comparable to a new unit. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of each table and assembly is restored, both the X and Z-axis guideways are hand-scraped and restored to like-new condition. Upon completion, the machine receives a measurement protocol according to the manufacturer's specifications. Painting: After the machine's geometry is restored, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also fully overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Specifications: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine Weight and Dimensions: 2,500 kg // 2340 x 1445 x 1900 mm Machine Equipment (Standard): 1x Workpiece headstock MK5 1x Operator panel 1x Mount for internal grinding spindle 1x Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1x Hydraulic unit Optional: - 2-axis digital readout system - Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds possible upon clarification of technical details) - Separate low speed for part alignment

Sąlyga: naudotas, Gamybos metai: 2009, Maximum inner diameter: 600 mm Maximum grinding depth: 800 mm Maximum grinding length: 600 mm Control system: Siemens 840 D Maximum inner grinding diameter: 600 mm Maximum outer grinding diameter: 800 mm Maximum workpiece length: 380 mm Maximum external grinding length: 600 mm Travel - X1 axis: 150 mm Travel - Z1 axis: 1100 mm Travel - X2 axis: 470 mm Travel - Z2 axis: 800 mm Workpiece spindle power: 8.5 kW Gbodpfx Aswp S Tnsbdeg Stepless speed range: 1–795 rpm Equipment / Accessories: Workpiece spindle unit (U/B1/L adjustment): - Travel (U axis): 300 mm - Swivel angle (B1 axis): -0.5°/+12° - Workpiece spindle drive power: 8.5 kW - Stepless speed range: 1–795 rpm - Setup speed (jog mode): 10 rpm - Spindle head size A8 as per DIN 55026 - Through-hole: 58.5 mm - Maximum workpiece diameter: 830 mm - Max. workpiece length (supported at one end): 800 mm - Max. workpiece length (between centers): 800 mm - Max. spindle head load capacity: 6100 N Internal grinding device (Z1/X1/B2): - Travel (Z1 axis): 1100 mm - Travel (X1 axis): 150 mm - Swivel angle (B2 axis): 270° - Manual longitudinal adjustment of the internal grinding axis on table: 780 mm - Stepless drive power of internal grinding spindles (belt-driven): 7.5 kW - Grinding spindle mounting bore (diameter): 100 mm / 125 mm - Grinding spindle mounting length: 220 mm - Maximum grinding diameter: 600 mm - Maximum grinding depth: 800 mm External and face grinding device (Z2/X2): - Travel (Z2 axis): 800 mm - Travel (X2 axis): 470 mm - Swivel angle (B2 axis): 270° - External grinding spindle drive power: 7.5 kW - Grinding spindle mounting bore: Ø 140 mm - Maximum grinding diameter: 800 mm - Maximum grinding length: 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm

Sąlyga: naudotas, Gamybos metai: 1973, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 40715, bendras plotis: 2 000 mm, bendras ilgis: 2 500 mm, bendras aukštis: 2 000 mm, šlifavimo ilgis: 160 mm, bendras svoris: 2 100 kg, šlifavimo veleno variklio galia: 6 000 W, galia: 6 kW (8,16 AG), šlifavimo rato greitis: 175 000 aps./min, Naudota ID/OD šlifavimo staklės. Staklės yra įprastos būklės. Gbjdpfxjww Tv Tj Abdjg

Sąlyga: naudotas, Gamybos metai: 1983, Šlifuojamos kiaurymės min./maks. skersmuo: 10-250 mm Gbodpfex Alalox Abdsg Maks. šlifavimo ilgis: 500 mm Maks. darbinis skersmuo: 400 mm Maks. ruošinio ilgis: 1000 mm Pagrindinio veleno apsukos: 25-450 /min. Šlifavimo veleno apsukos: 8800-31000 /min. Pagrindinio veleno galvos pasukimas: 15° Bendras įrenginio suvartojimas: 9 kVA Staklių ilgis x plotis: 4400 x 2020 mm Bendras staklių svoris: 4400 kg

Sąlyga: geras (naudotas), Gamybos metai: 2000, Grinding diameter: up to 100 mm Max. grinding depth with table stroke of a) 300 mm = 120 mm, b) 550 mm = 230 mm Centre height above grinding table = 235 mm Table speed = 0–20 m/min Including various spindles and accessories Godpfx Ajxr Ayuobdsbg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Apsisukimo skersmuo: 400 mm Gbedpsxyllvofx Abdog Aprašymas bus pateiktas vėliau!

Sąlyga: naudotas, Gamybos metai: 2008, Internal diameter 99999 mm Grinding depth 99999 mm Swing diameter 99999 mm Control: FANUC 320iA 3 x internal grinding spindles: 2x HV-X 100-90000/3 Housing diameter: 100 h5 mm Max. spindle speed: 90000 rpm Nom./max. power: 2.5 / 3.0 kW Spindle nose: D10/18 Spindle cooling: Water 1x HS80c 120000/1.1 Housing diameter: 80 h5 mm Max. spindle speed: 120000 rpm Nom./max. power: 0.8 / 1.1 kW Spindle nose: D06/12 Spindle cooling: Water 1 x external grinding spindle: MMO-100 HSK-C50/4 Diameter: 100 h5 mm Max. speed: 3770 rpm Gbsdpfxsx Dxw Hs Abdog Nom./max. power: PS1/PS6 - 6.0/7.0 kW Clamping system: HSK-50/M12 Grinding wheels: diameter 125-200 x 2-20 mm 1 x dressing spindle MHF-72 D40/16 Housing diameter: 72 h6 mm Max. speed range: 16000 rpm Power S1/S6: 400 / 500 W Spindle nose: 40 mm / 8xM5 on PCD 56 mm Spindle nose: 40 mm / 4xM5 on PCD 32 mm Dressing unit for automatic dressing with hydraulically pivoting arm. Precision positioning and locking via conical, ground and hardened pin. Swivel movement: hydraulic Swivel speed: adjustable 1 x measuring probe (longitudinal positioning) Etamic C25 X-axis Travel: 400 mm Resolution: 0.0001 mm Feed rate: 0-10,000 mm/min Measurement: absolute glass scale Z-axis Travel: 400 mm Resolution: 0.0001 mm Feed rate: 0-10,000 mm/min Measurement: absolute glass scale B-axis Travel: +60° to -91° Resolution (angle encoder): 0.0005° Resolution (drive): 0.0001° Feed rate: 25°/sec Measurement: absolute angle encoder Turret Number of positions: 4 Tool change time: 5 sec Possible spindle diameter: 0 - 100 mm Workpiece spindle Max. spindle speed: 1,000 rpm Headstock Max. power: 1.8 kW 960-41 Spindle nose: A2.4/MK5 Equipment for cut detection Cut detection and process optimization for optimizing the grinding and dressing process and minimizing air grinding time. Signal via structure-borne sound sensor mounted on the workpiece headstock, consisting of: - 1x AE evaluation system with display AE4100 - 1x cable - 1x software and installation effort inc. material Sensor and receiver for dressing spindle - 1x ring sensor - 1x ring receiver Sensor and receiver for spindle nose A2.4/MK5 Electrical cabinet with CNC control FANUC 320i A and control console with 15" color LCD TFT 1024 x 768, 55-key panel with LEDs PC keyboard QWERTY Intel Pentium III 866 MHz Windows XP Professional Combitec HMI for FANUC 320i A Standard programming language according to DIN/ISO, workshop-oriented grinding cycles (WOP) Mobile handwheel with selector switch 0.001, 0.01, 0.1 mm and axis selector switch Feed correction via detented potentiometer 0-100 %, spindle speed correction via detented potentiometer 50-125 % RJ-45 Ethernet with TCP/IP Software and accessories for radius and cone grinding with PC simulation and CNC contour grinding Fully automatic grinding of a radius G71 and/or a cone G72 from a specified angle to a defined angle with t...

Gamybos metai: 1971, Sąlyga: paruoštas naudoti (naudotas), Yra Wotan volų vidinio šlifavimo staklės. Detalės skersmuo: 1200 mm, didžiausias išorinis skersmuo: 1000 mm, didžiausias gręžinio skersmuo: 900 mm, X/Z eiga: 370 mm/800 mm, pasukimas: 15°, stalo eiga: 500 mm, šlifavimo gylis: 250 mm, apsisukimų skaičius: 220 aps./min. Staklių matmenys X/Y/Z: apie 5000 mm/3000 mm/2200 mm, svoris: apie 8500 kg. Yra dokumentacija. Apžiūra vietoje galima. Gjdpfexyk S Uox Abdobg

Sąlyga: naudotas, Gamybos metai: 1971, šlifavimo gylis: 150 mm, šlifavimo skersmuo: 80 mm, vidinis skersmuo: 80 mm, Gamintojas: OVERBECK Modelis: 250 I Pagaminimo metai: 1971 Didžiausias ruošinio tvirtinimo skersmuo: 140 mm Didžiausias tvirtinimo ilgis: 150 mm Šlifuojamos angos ilgis: 150 mm Didžiausias angos skersmuo: 80 mm Plokštuminio šlifavimo įrenginys įsukamas rankiniu būdu Aušinimo skysčio bakelis su siurbliu Be šlifavimo veleno ir pavaros variklio Godpeu Ef Dqsfx Abdjbg Paskutinį kartą naudota su suspausto oro velenu Svoris: apie 1400 kg

Sąlyga: naudotas, Gamybos metai: 1983, Internal diameter min / max: 10 / 250 mm Grinding depth: 400 mm External diameter max.: 380 mm Swing diameter: 390 mm Table travel max.: 550 mm Table stroke min.: 2 mm Rapid traverse: 10 m/min Table speed - stepless: 0 - 10 m/min Coarse adjustment: 18 mm Fine adjustment: 4 mm Max. workpiece weight: 100 kg Spindle head B 6 DIN 55021 Spindle speeds - stepless: 15 - 1,500 rpm Swivel angle max.: +/- 30 degrees Spindle bore: 50 mm Gbsdjvprxfepfx Abdeg Drive power: 2 kW Rapid traverse: 0 - 250 mm/min Stroke: 70 mm Drive power: 3 kW Machine weight approx.: 2.7 t Space requirement approx.: 3.0 x 3.0 x 3.2 m Internal grinding machine BAHMÜLLER - JES 12 - new control (July 2015)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 2 184 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2407-463, veleno greitis (maks.): 60 000 aps./min, ašies skaičius: 3, B ašies pasukimo kampas (min.): −90 °, B ašies pasukimo kampas (maks.): 15 °, TECHNINĖ INFORMACIJA Šlifavimo velenų apsisukimai Velenas 1: 60 000 aps./min Velenas 2: 60 000 aps./min Velenas 3: 45 000 aps./min B ašies pasukimo diapazonas: -90°/+15° STAKLIŲ INFORMACIJA Velenų darbo valandos Velenas 1: 11 278 val. Velenas 2: 2 184 val. Velenas 3: 2 841 val. Pagrindinis skaitiklis: 45 144 val. Godpfx Aboxtdfbsdsbg ĮRANGA Matavimo zondas (4-oje veleno vietoje)

Sąlyga: geras (naudotas), Made in Germany Smallest economically grindable bore: 6 mm Gbsdsda A Eiepfx Abdjg Largest grindable bore: 50 mm Maximum grinding length: 80 mm Maximum clamping diameter: 235 mm Distance from workpiece spindle axis to table center: 145 mm Workpiece spindle speeds: 640 and 1000 rpm Workpiece spindle box swivel angle to one side: 10 degrees Maximum table speed, hydraulically infinitely variable: 12 m/min Maximum distance between workpiece spindle flange and grinding support: 550 mm Power requirement: approx. 8 kW Net weight of the machine: 2000 kg

Sąlyga: geras (naudotas), Gamybos metai: 1988, Spindle Speeds: 170 - 18,000 rpm Machine Weight: approx. 7.5 t Space Requirements: approx. 5.00 x 4.00 x 2.20 m - Control system retrofit (2014) to Siemens Sinumerik 840D Solutionline - Overhaul of the new control system in 2016 Technical Specifications: - Grinding diameter: 20 - 300 mm - Swing diameter: 350 (500) mm - Workpiece length: 300 (1300) mm - Recommended grinding depth up to: 300 mm - Grinding Table Travel Z-Axis (total): 650 (950) mm - Resolution: 0.001 mm - Rapid traverse: 12 m/min - Grinding stroke speed: 0 - 9.99 m/min - Feed rate: 0 - 99.99 m/min - Step feed value during reversal: 0 - 0.999 mm Godpfx Abew Intajdjbg - Grinding Table Travel X-Axis (total): 150 mm - Resolution: 0.001 mm / Ø - Rapid traverse: 5 m/min / R - Grinding stroke speed: 0 - 5 m/min / R - Feed rate: 0 - 99.99 m/min / R - Step feed value during reversal: 0 - 0.999 mm / Ø - Swiveling range of the workpiece spindle head: - B-Axis: -32° (-23°) / +2° - Resolution: 0.0001° (0.36") - Travel U-Axis (total): 300 mm - Resolution: 0.001 mm / Ø - Travel speed: 5 m/min - Center height above workpiece table: 200 (300) mm - Center height above grinding table: 330 (430) mm - Workpiece spindle bore: 50 (70) mm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 847/0021, centro aukštis: 1 180 mm, veleno greitis (maks.): 12 000 aps./min, ruošinio veleno greitis (maks.): 1 100 aps./min, padavimo ilgis X ašis: 350 mm, padavimo ilgis Z ašis: 530 mm, Especially suitable for grinding operations, boring, and flat machining of custom parts (e.g., various bevel gears) TECHNICAL DETAILS Center height: 1,180 mm Max. ground flat surface: Ø 200 mm Max. grinding depth: 70 mm Closable bore: max. Ø 250 mm Max. distance front edge of workpiece spindle to grinding wheel mounting: 250 mm Max. workpiece + clamping device weight: 150 kg X-axis travel: 350 mm Z1-axis travel: 530 mm Control system: CNC Sinumerik 840 D Spindle speeds Main spindle (infinitely variable): up to 12,000 rpm Workpiece spindle speeds Workpiece spindle (infinitely variable): up to 1,100 rpm Grinding spindle Type: 170 EGV 12-20 T Tool holder: Ø 170 mm Screw thread: M36 x 2 Swivel range: 3° fixed position Workpiece spindle Spindle head: similar to DIN 55026 / Z7 Type: A6 Spindle bore (without collet): Ø 46 mm Cylindrical correction: ± 5 minutes Axis drives X1-axis (Siemens 1 FT6 062): 5.0 kW / 3.4 A / 3,000 rpm / IP 65 Z1-axis (Siemens 1 FT6 064): 7.9 kW / 5.2 A / 3,000 rpm / IP 65 S1-axis workpiece spindle (Siemens 1 FT6 084): 16.2 Nm / 11.3 A / 3,000 rpm / IP 65 Feed rates X1-axis: 9,000 mm/min Z1-axis: 18,000 mm/min MACHINE DETAILS Footprint: 7,800 x 5,200 x 3,400 mm Machine weight: 5,000 kg Drive Total connected load: 45 kVA Total power requirement: 45 kVA Supply voltage: 400 V Frequency: 50 Hz Coolant requirement Coolant quantity (process cooling): 100 l/min Pressure: 2.0 bar Noise level Sound pressure level: 75 dB(A) Gbsdjwm H H Rjpfx Abdeg EQUIPMENT - Gantry system (Felsomat) - Oval indexing conveyor (EWAB) - Hydraulic unit according to DIN - Special chuck (Röhm) - Turbo dressing spindle (EFESIS) - Air purifier D2000 (IFS)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: ribota funkcionalumas, veleno greitis (min.): 31 000 aps./min, Įranga: sūkių greitis be galo kintamas, Dėl priėmimo kaip dalinės įmokos parduodame TOS BDU 250 A vidinio cilindrinio šlifavimo stakles su šiais pagrindiniais techniniais duomenimis: Šlifavimo skersmuo: 250 mm Didžiausias išilginio stalo eiga: 600 mm Didžiausias vidinis skersmuo: 250 mm Gbodpew Rllxjfx Abdog Mažiausias vidinis skersmuo: 10 mm Detalės veleno apsisukimų dažnis: 25; 45; 80; 140; 250; 450 sūkių/min Vidinio šlifavimo veleno laikiklis: šiuo metu Ø 100 mm Didžiausias Ø be griebtuvų apsaugos: 470 mm Šlifavimo galvos judėjimas: 15° ir 90°, sumontuota ant osciliuojančio išilginio stalo. Įranga: - Aušinimo skysčio bakas - Hidraulika - Naudotas vidinio šlifavimo velenas - Mašinos apšvietimas - Dokumentacija ir naudojimo instrukcija Informacija apie įrenginį: Įrenginio gedimas (nesutvarkytas transformatorius, automatinis režimas be nuėmimo įrenginio).

Sąlyga: naudotas, Gamybos metai: 1973, min./max. grindable bore: 8 / 10 mm max. grinding depth for internal grinding: 150 mm swing diameter: 450 mm workpiece spindle bore: 35 mm max. swiveling angle: 30° table longitudinal travel min./max.: 5 / 150 mm/min Gbjdpfx Ast Rlgujbdsg Internal grinding machine | JUNG - D14 The machine is in well-maintained condition. Please refer to the offer for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: D-14 | D 14

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1983, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8151, sukamosios stalo skersmuo: 800 mm, šlifavimo aukštis: 750 mm, ruošinio svoris (maks.): 800 kg, bendras aukštis: 4 100 mm, bendras plotis: 26 650 mm, bendras ilgis: 44 000 mm, padavimo eiga Y ašimi: 750 mm, padavimo ilgis Z ašis: 550 mm, bendras svoris: 13 000 kg, šlifavimo disko skersmuo: 400 mm, disko skersmuo: 400 mm, šlifavimo veleno greitis: 1 460 aps./min, šlifavimo skersmuo: 800 mm, valdymo spintos plotis: 650 mm, įvesties srovės tipas: Nuolatinė srovė, valdymo spintos aukštis: 1 900 mm, valdymo spintos ilgis: 1 800 mm, veleno greitis (maks.): 1 800 aps./min, veleno greitis (min.): 1 460 aps./min, stalo apkrova: 900 kg, ruošinio skersmuo (maks.): 850 mm, šlifavimo ratuko plotis: 60 mm, stalo plotis: 1 240 mm, galia: 35 kW (47,59 AG), greitas poslinkis X ašimi: 2 m/min, greitas poslinkis Y ašis: 100 m/min, greitasis eiga Z ašyje: 2 m/min, reikalingas aukštis: 4 100 mm, vietos reikalavimas ilgis: 5 100 mm, reikalingas plotis: 2 655 mm, Good day, For sale is a well-maintained and fully functional Sielemann cylindrical grinding machine suitable for the following applications: surface grinding, internal grinding, and external grinding. The machine features a swiveling column with 3 different grinding heads, each designed for specific operations. A complete set of machine documentation is available and can be presented during inspection. The Sielemann offered here has been regularly serviced and maintained. Most recently, the following components have been renewed: - 3x New counterbalance cylinders - 1x New hydraulic unit (complete) - New guideway covers - Rotary table assembly overhauled Technical Specifications Machine length: 4,400 mm Machine width: 2,655 mm Machine height: 4,100 mm Machine weight: 13,000 kg Control cabinet width: 650 mm Control cabinet height: 1,900 mm Control cabinet length: 1,800 mm Grinding table diameter: 800 mm Grinding table load capacity: 800 kg Grinding table drive power: 0.21 – 14.5 kW Grinding table speed: 100 rpm (bi-directional) Workpiece clamping on grinding table: Magnetic chuck including T-slots Z-axis travel (grinding table): 550 mm Maximum grinding height (Y): 750 mm Lubrication pump, machine bed: 0.18 kW Lubrication pump, machine column: 0.1 kW Leak oil pump: 0.065 kW Hydraulic pump: 1.5 kW 1) External cylindrical grinding head Spindle drive power: 11 kW Spindle speed: 1,450 rpm Grinding wheel: 400 x 50 mm Taper spindle mount: D = 65 mm Taper ratio: 1:5 Feed rate (Y): 100 mm/min 2) Internal cylindrical grinding head Spindle drive power: 5.5 kW Grinding wheel: variable Feed rate (Y): 100 mm/min 3) Surface/cylindrical grinding head Spindle drive power: 11 kW Gbodpforntirex Abdog Spindle speed: 1,800 rpm Grinding wheel: 400 x 50 mm Taper spindle mount: D = 65 mm Taper ratio: 1:5 Feed rate (Y): 100 mm/min Inspection appointments can be arranged promptly by appointment! Best regards, R. Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, 1 Internal and Surface Grinding Machine Make: WEMA Glauchau Model: SI 6/2 ALS PC x 710 Year of manufacture: 1985 Grinding depth: 710 mm Table travel: 1120 mm Grinding diameter: 40 – 400 mm Gbedpfjw Dtfbsx Abdjg Weight: 9.1 t

Sąlyga: naudotas, Internal diameter: 340/440 mm Grinding depth: 99,999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workhead swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±10° Table longitudinal travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (flying): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines refurbished to as-new condition with warranty, but also offer service for your machines. Warranty: 12 months from delivery—for Germany and neighboring countries. Pure internal cylindrical grinding machine with stepless adjustable drive (0–100%). Available in current RAL colors! Standard centre height 175 mm, extendable to 225 mm. Fixed internal grinding spindle with belt tension via tension pulley! Z-axis reversing accuracy max. 0.01 mm! Geometrically overhauled and newly painted, with: - New electrical cabinet. - New three-phase workpiece spindle motor and controller. Gbjdpod Ih Dxjfx Abdog - 2-axis digital readout, X-axis resolution 0.5 μm. Options: - Encoder with digital display in the workhead - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm Includes: - Operating tools Further accessories on request. The machine tool currently does not meet the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The minimum required safety level must be determined by means of a risk assessment pursuant to BetrSichV.

Sąlyga: reikia remonto (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Technical data Voumard 400 CNC (COMPLETE RETROFIT AVAILABLE) Gjdpfx Abjxpf Ezjdjbg Min. grinding diameter: 20 mm Max. grinding diameter: 300 mm Max. grinding depth: 300 mm Max. workpiece and steady rest length: 1,500 mm Centre height: 300 mm Axis strokes: - Longitudinal travel (Z-axis): 650 mm - Cross travel (X-axis): 150 mm Workpiece spindle speed: max. 1,000 rpm (B-axis) +2° / -20°, manual adjustment on workpiece head (B1-axis) turret, CNC-controlled spindle change Max. axis rapid traverse: Z – X 12,000 mm/min Grinding head 1: grinding motor power 7 kW, 15,000 rpm Grinding head 2: grinding motor power 7.8 kW, 12,000 rpm Machine weight approx. 9,500 kg Machine dimensions: - Length: 5,000 mm - Width: 2,300 mm - Height: 2,400 mm New Siemens 840D SL CNC control system

Sąlyga: naudotas, Gamybos metai: 2003, Internal diameter 99,999 mm Grinding depth 99,999 mm Swing diameter 99,999 mm Grinding diameter 99,999 mm Grinding length 200 mm Centre height 175 mm CNC internal grinding machine B-axis 4 x 90° Q-axis for taper adjustment Used, with minor servicing 2 high-frequency internal grinding spindles: - Fischer MFM 1090 90,000 rpm - Fischer MFM 1242/60 42,000–60,000 rpm 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm - Pneumatic force clamping device with 20 mm stroke - Dressing unit with 2 pivoting arms, hydraulically retractable - Contact detection ring sensor (Dittel) on the workpiece spindle head - Passive contact detection with magnetic base - Paper band filter 375 l Gbsdpfxeuxft Se Abdjg