Priedas Klijavimo Mašina pirkti naudotą (14 206)

Sąlyga: labai geros būklės (naudotas), Biesse Stream 5.5 A briaunavimo staklės Rida: 246 000 m Medžiagos prispaudimas iš viršaus juosta, Skysčiai Pirminiai frezai, Klijų padengimas, PUR klijų išankstinis lydytuvas Talpa turi klijų išleidimą Pneumatinė išankstinė giljotina, Prispaudimo volai Skysčiai Galutinio pjovimo pjūklai, Viršutinio-apatinio frezavimo agregatas, tiesiniais frezais Viršutinio-apatinio frezavimo agregatas (multi frezai) Du kampų apdirbimo agregatai Skysčiai Profilinė skutimo galvutė (multi R1-R2), Bledexxlqvspfx Admor Valomieji skysčiai Plokščias skutimo įrenginys, Poliravimo agregatas, Staklės turi NC frezų valdymą ir pneumatinį paketą, Didžiausias elementų aukštis – 60 mm, Maksimalus briaunos storis ritinyje – 3 mm, Padavimas: 12, 18 ir maks. 20 m/min Staklės labai geros būklės.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, veikimo valandos: 730 h, Hebrock AKV3005DK-F Edgebanding Machine with Jointing, Corner Rounding, and Two Scraper Blades. Very well-maintained machine from a small workshop, in outstanding condition. Touchscreen interface with PLC control for easy operation of the machine, up to 12 user programs can be saved. Edge thickness for rolls: approx. 0.4 - 3mm Workpiece height: approx. 8 - 53mm Feed speed: approx. 10m/min Sound-insulating hood Extendable workpiece support, special feature, extendable up to 950mm Dust extraction connection: 80 + 140mm Units: Quick-change glue pot with glue outlet, two glue pots included (one used for EVA glue, one for PU glue), the PU glue pot is practically as new, used for only one job. Upper pressure manual adjustment with SIKO counter Infeed fence manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Jointing milling with Leitz Whispercut diamond cutters, still sharp Gluing station with automatic edge feed for coil material up to 3mm Pressure zone with 4 rollers Cut-off saw Integrated collection container for edge remnants Combined milling unit, R2 with pneumatic adjustment between thin and thick edge Corner rounding unit R2, pneumatically adjustable between thin and thick edge The contour milling unit can also be used for shelf programs, i.e., only the straight edge is rounded, not the corners Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Blsdpfetpn Etox Admor Hood locking CE mark Operating instructions A video of the machine in operation can be sent on request. All indexable inserts of the milling units and scraper blades have been renewed or rotated, saw blades sharpened. The machine is thus ready for immediate use. Only the diamond jointing cutters (Whispercut) have not been replaced, but are still sharp. Paintwork touch-ups have been carried out. The Hebrock AKV series is the predecessor of the current K series. Machine has approximately 730 operating hours (glue pot switched on), but the frequency inverters were only switched on for approximately 455 operating hours. The machine is in very good condition, see original photos. Machine dimensions approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. The machine can be inspected at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'further offers from this supplier.'

Sąlyga: naudotas, Holz Her UNO 1303 + PU Kraštų storis 0,4–3 mm (6 mm) Valdymo pultas su pasirinkimo jungikliais agregatų nustatymui Krašto magazinas – visiškai automatinis ruloninei ir juostinei medžiagai Bledpfxsxlz Nzj Admsr Klijų užtepimo stotis: patronai + PU klijavimas Ruoinio aukštis 6–55 mm Spaudimo įrenginys – pneumatinis Kappavimo agregatas ruloninei ir juostinei medžiagai iki 3 mm (6 mm) krašto storio Su galimybe nustatyti 0–10° šlaitą pjūklams Frezavimo agregatas: briaunų lyginimas, radiusinis frezavimas, fazavimo frezavimas – 15° Grandiklio agregatas kraštų ir radiusų fazavimui Paviršinis grandiklio agregatas – apdaila Mašina PATIKRINTA, PUIKIOS BŪKLĖS, iš labai prižiūrėto meistrinio verslo Sandėlyje Liebocho mieste

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, priešfrezavimo agregatas granulių klijavimo stotis pneumatinė išankstinio pjovimo giljotina pjukliukai tiksliam ruošinio galų nupjovimui frezavimo agregatas su profiliuotais frezais kampų frezavimo agregatas profilio ciklinimo agregatas universalaus ciklinimo agregatas mašinos ilgis 4500 mm Blsdpfx Aexw T Tisdmjr Pagaminimo metai: 2013 Nubėgta – 87 026 m

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: T/41242, ruošinio aukštis (maks.): 52 mm, briaunos storis (maks.): 12 mm, darbinio aukščio: 880 mm, tuščias svoris: 3 000 kg, pralaidumo greitis: 233 mm/s, TECHNICAL DETAILS Operating method: Single-sided, right-hand execution Edge thickness: 0.2 - 12 mm Workpiece dimensions Minimum width: 70 mm Minimum height: 8 mm Maximum height: 52 mm Minimum length: 150 mm Feed speed: 10 - 14 m/min Working height: 880 mm MACHINE DETAILS Processing units Jointing unit with 2 HF motors, 1.5 kW Dual end trimming unit with 2 HF motors, 0.3 kW Flush trimming unit with 2 HF motors, 0.7 kW Fine chamfering unit with 2 HF motors, 0.3 kW Fine radius trimming unit with 2 HF motors, 0.3 kW Corner rounding unit with 2 motors, 0.35 kW Scraper unit for plastic edges Dimensions & Weight Machine dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine weight: 3,000 kg Operating voltage: 400 V, 50 Hz Total connected load: 12 kW Electrical connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic coil magazine for coils up to 800 mm diameter with pneumatic cutting device for up to 3 mm thickness Bsdpfx Aoxtfchjdmolr Automatic edge magazine with optical monitoring for strip edges in fixed lengths Infeed fence with automatic positioning based on entered jointing value CM - CombiMelt - modular gluing system Control system via 7-inch TFT touch color display 100 work programs freely storable alphanumerically PLC for high-resolution path control Individual frequency inverters for selective activation of processing motors Hole detection for bypassing CNC processing Network capability for integration into a data network

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Atnaujinta briaunų klijavimo staklės BRANDT AMBITION 1440 Bedpew S E Rqefx Admjlr

Sąlyga: naudotas, Okleinavimo staklės Hebrock AKV 3005, gerai sukomplektuotas, galimybė patikrinti prieš perkant, Skysčiai prieš frezas, Pradiniai frezai, Klijų padengimas voleliu, su klijų nuleidimu, Komplekte antras klijų indas, Pneumatinė išankstinė giljotina, Prispaudimo voleliai, Galutinis apipjovimo pjūklas, Frezuojantis agregatas viršuje-apačioje, R1 – R2 reguliuojamas pneumatiniu būdu, Profilinė ciklina, kampų apdirbimo agregatas, Skysčiai prieš cikliną, Plokščioji ciklina, Poliratorius, Bljdpfxew I Sp Sj Admjr Maks. okleinos storis ritinyje – 3 mm, Maks. užklijavimo storis – 12 mm, staklės labai geros būklės.

Sąlyga: naudotas, Gamybos metai: 2017, Naudota mašina Pagaminimo metai: 2017 Įranga ir techniniai duomenys: Gamykloje atnaujinta Lange Maschinenbau Ruošinio plotis min.: apie 75 mm Ruošinio storis: 8–50 mm Ruošinio ilgis min.: apie 120 mm / 180 mm kampų kopijavimo režimu Krašto storis: 0,4–2 mm Bledpfx Adsw Sbblsmer Dengimo agregato drožimo gylis: 0–2,0 mm, bepakopis reguliavimas Dengimo agregatas su 2 priešinėmis, automatiškai valdomomis dengimo galvutėmis Deimantiniai įrankiai, aukštis = 55 mm Tiesioginis klijų padavimas ant ruošinio Klijų rezervuaras, talpa 1,5 kg EVA/PUR klijų rezervuaras su išleidimo funkcija Presavimo blokas Nupjovimo agregatas su HF varikliu, 2 pjūklų diskais ir itin tiksliomis linijinėmis kreiptuvėmis Kombinuota frezavimo stotis, skirta spindulio ir briaunų frezavimui Kampų kopijavimo agregatas Plokštumos šukavimo agregatas Nusiurbimo vamzdžių sistema su 90° alkūne ir rankiniu sklendės įrengimu, pritvirtinta prie mašinos Mašinos ilgis: 3273 mm Prieinamumas: greitai Vieta: Flörsheim

Sąlyga: naudotas, OTT Tornado - TOP Valdymas - per 15 colių spalvotą jutiklinį monitorių visiškai automatizuotam ir maksimaliai patogiam naudojimui CM-CombiMelt klijavimo sistema, tinkama EVA ir PUR karšto lydalo klijų bei visų įprastų valymo granulių apdorojimui Sujungimo apdirbimo mazgas laminuotoms plokštėms klijuoti Automatinis ritinių žurnalas Automatinis briaunų žurnalas Dvigubas kapavimo įrenginys su automatiniu pasukimu 0° / 3° Pjovimo įrenginys kantams – iki 12 mm Tiksliojo frezavimo įrenginys RADIUS – profilio frezavimas R2 - R5 Automatizuotas kopijavimo frezavimas – kampų apvalinimas Briaunų grandiklis – spindulys Briaunų grandiklis – spindulys – nuolydis Paviršiaus grandiklis Tepimo skysčio purškimo sistema – PU Valymo rinkinys su poliravimo įrenginiu Labai stabilus ruošinio laikiklis su ritininių takelių sistema – PRIEKYJE su žirklių ištraukimu Visi įrankiai komplekte Staklės beveik NAUJOS, YPAČ PRIŽIŪRĖTOS BŪKLĖS Pirmas paleidimas 2009 m., labai mažai darbo valandų – apie 1600 Įranga iš lizingo / galimybė lizingui Iš sandėlio Lieboch Bjdpfxsxy Iw Uo Admolr

Sąlyga: geras (naudotas), Gamybos metai: 2021, Briaunos storis nuo 0,4 iki 3 mm Ruoinio storis nuo 10 iki 50 mm Padavimo greitis 9 m/min - Siurbimo jungtis: 2 x 150 mm - Suspausto oro poreikis: 6 bar - Valdymo skydelis su 12" lietimui jautriu ekranu - Jungimo frezavimo agregatas - Valdomas briaunos oro pūstuvas - Teflonu dengta klijų vonelė - Spaudimo agregatas - Pneumatinės atpjovimo žirklės - Atpjovimo pjūklas - Spindulio frezavimo agregatas Bodpfxexzuxhe Admelr - Apvalinimo agregatas - Spindulio gramdiklis, pneumatinis - Plokštumos gramdiklis, pneumatinis - Poliravimo agregatas - 4 vnt. Riepe purkštuvų įrenginys

Sąlyga: naudotas, Gamybos metai: 2016, Industrial Automatic Edge Banding Machine SOLUTION XD MAIN FEATURES "E TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE Standard pressure unit with drive belt for optimal panel guidance Edgebanding of rolls, strip edges and solid wood edges GENERAL FEATURES: Single-sided edge banding machine in left-hand version for edgebanding of rolls and strip edges with all conventional hot-melt adhesives. The base frame consists of a stable welded steel stand with high rigidity, providing optimal support for the processing units. The upper pressure section consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned to match the panel thickness. Height adjustment with display on the upper pressure and operator interface. Manual panel feed system with large-sized working line and enlarged support area facilitates the introduction of large workpieces. Adjustable infeed fence in two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically linked to ensure automatic adjustment when changing panel thickness. Lower working units are fixed either to the machine base or the longitudinal rail for precise referencing to the panel. All high-frequency motors are controlled by frequency inverters; each working unit is equipped with its own inverter for optimal flexibility and improved production times. Hood for all units located after the glue station; polycarbonate windows provide good visibility during processing. Internal lighting of the hood with sound-absorbing material for lower noise emissions during operation. Spacers on the infeed fence enable proper spacing of the panels; the distance is automatically adjusted to the selected feed speed. Swiveling control panel, located at the panel infeed area, adjustable for ergonomic operation. Electrical system complies with current regulations, electrical components housed in a metal enclosure fixed to the machine frame with doors for easy access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral). Material feed by feed chain with 80 mm wide chain plates made from rubber-coated nylon, for optimal guidance and high durability. The chain runs on two rails made from hardened and ground steel, one round and one flat, to guarantee straight movement and prevent lateral displacement. Pneumatic chain lubrication; lubrication oil quantity is controlled via the PLC, adjusted according to the processed panels. External roller conveyor runs along the entire machine length; extendable up to 650 mm opening system (for panels up to a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of main functions, including: program processing in Just in Time mode, option for management via material lists, and management functions by reference. Bjdpfxoxy Tm Io Admelr

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Edge banding machine Brandt KDF 530 C with pre-milling, corner rounding, two scraping blades, and Riepe spray units. A video of the machine in operation can be sent upon request. Machine is highly automated Edge thickness approx. 0.4 – 8 mm Workpiece height approx. 10 – 50 mm Feed speed approx. 11 m/min Soundproof cabin Extendable workpiece support Extraction connections 1x200 mm, 1x100 mm including the piping shown PC16 control system with color screen for easy machine operation Aggregates/units: Bedexd Dudepfx Admelr Top pressure manual adjustment with SIKO counter Infeed fence manual adjustment with SIKO counter Release agent spray unit Riepe Pre-milling with Leitz Whispercut diamond cutters, sharpened Gluing unit switchable for synchronous and counter rotation Pressure zone with 3 rollers Cut-off saw with 2 motors, straight or beveled cutting (programmable adjustment) Combination milling unit with motorized lateral adjustment Radius scraper R2, pneumatically adjustable Corner rounding unit R2 with diamond cutter (1 motorized), pneumatically adjustable between thin and thick edge Glue joint scraper, pneumatically retractable with large roller Cleaning agent spray unit Riepe Buffing unit Hood locking CE mark Operating manual as binder and CD All indexable inserts in the milling units and scraper blades have been renewed or rotated, saws sharpened, pre-milling cutters sharpened, buffing discs replaced. Machine is therefore ready for immediate use. Only the diamond cutter for the profile milling unit has not been replaced, but is still sharp. Minor paint touch-ups have been done. Approx. 3,500 operating hours. The condition of the machine speaks for itself. Occasionally, the computer restarts while the machine is running (mostly at high ambient temperatures); this has not been an issue for us, as work can continue during the reboot. Machine dimensions approx. 4800 x 1200 x 1800 mm (LxWxH) Weight approx. 1900 kg. The machine can be demonstrated on site by prior arrangement. We only offer machines that are ready for demonstration in our warehouse – see 'Other offers from this supplier.'

Sąlyga: geras (naudotas), BRANDT highflex 1440 Edgebander Well equipped, available for inspection before purchase Pre-milling cutters Glue application unit Pneumatic pre-cutting guillotine Pressure rollers Bedpfot Hxxpox Admjlr Finishing saws Preliminary top/bottom milling unit 2 x Multifunction trimming/milling units Profile scraper Flat scraper Polishing unit Machine features NC-controlled milling and pneumatic package Max workpiece height: 60 mm Max edge band thickness in roll: 3 mm Max feed speed: 14 m/min Machine is well-maintained and in very good condition.

Sąlyga: naudotas, Gamybos metai: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and Technical Data: - with new glue application system - Infeed fence adjustable manually - Milling unit 1961 - Edge feeder 1903 - Glue application station 1906 with sensing nozzle - Pressure unit 1816 pneumatic - End trimming unit 1822 - Milling unit 1942 M for radius, chamfer, flush trimming - Complete air nozzle - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Complete extraction hood set - Complete safety covers - Total length: 5,291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge band thickness depending on equipment: 0.4–5 mm - Max. edge band height: 55 mm - Min. edge band strip length: 350 mm - Max. edge band overhang/height per side: 3 mm - Workpiece width: min. 60 mm Bjdowka H Sepfx Admjlr - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Extraction: - Jointing/milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper unit: 280 m³/h - Static negative pressure: - Jointing/milling unit: 1490 Pa - Milling unit: 1650 Pa - Minimum air velocity: 20 m/sec - Jointing/milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: short-term Location: Flörsheim

Sąlyga: geras (naudotas), Gamybos metai: 2010, Briaunos storis nuo 0,4 iki 5 mm Rušinėlio storis nuo 8 iki 60 mm Bendras ilgis 2814 mm Padavimo greitis 11 m/min. Bjdpfxjxylpue Admjlr - Quick-Set sistema - Pjovimo agregatas - Multifunkcinis frezavimo agregatas

Sąlyga: naudotas, Gamybos metai: 2018, Edgebanding machine AKV 3006 DK - F with jointing unit including DIA tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combination milling station Radius R 2.5 mm Technical Description: - Application of hot-melt adhesive to workpieces for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with disposable insert cutters (combination type) and fine adjustment of cutter from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Adjustable cutting depth for cross-cut saw - Signal lamp for workpiece sequence - Robust chain drive Blsdpfoxfh Tmjx Admer - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate inspection windows from the rear and operator sides of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thicknesses: 8 - 40 mm - Weight: approx. 1550 kg depending on configuration - Dimensions (L x W x H): 5250 x 1445 x 1600 mm - 2-point pneumatic cutter adjustment, 1 unit - Switching between radius / flush / chamfer on the combination milling stations - Switching between chamfer or flush is done manually by shifting the stop flap inside the machine - Buffing station (swab) 1 unit - Corner rounding cutter 1 unit including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm - Radius scraper 1 unit including pneumatic lifting device, radius R 2.0 mm - Surface scraper 1 unit with pneumatic engagement control - Glue pot quick-change system including second glue pot with downward glue outflow, 1 unit for quick color changes - Horizontal grooving saw unit into the edge, 1 unit including pneumatic lifting device and groove tool - Separate extraction for jointing unit, 1 unit directly at the jointing unit, vertically upward d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onward - Ball bearing for corner rounding cutter 24.1 mm, 1 unit - Ball bearing for corner rounding cutter 24.2 mm, 1 unit - Interchangeable motor 0.37 kW for corner rounding cutter, 1 unit with quick-change device including radius cutter R 1 - Interchangeable spindles, 1 set = 2 pieces, 1 unit - Set of quick-change motors for longitudinal processing above and below, including tool R 1 - Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim

Sąlyga: labai geros būklės (naudotas), Kantų klijuotoja Artech Akron 420 Klijų padengimas voleliu, Pneumatinė preliminari giljotina, Prispaudimo voleliai, Blodpfx Adexw Uzzomsr Galiniai pjūviai pjūklais, Frezavimo agregatai R1, R2, Profilinė ciklina, Labai gera būklė

Sąlyga: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales region in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical data: Edge thickness (coil): 0.4 - 3 mm (material-dependent) Edge thickness (strips): 0.4 - 8 mm (material-dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Limitations may apply for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: - Motorized pressure beam adjustment Bedsxymd Tjpfx Admolr - Extendable workpiece support XL, 600 mm spacing - 3-color LED light at infeed - Motorized infeed fence adjustment - Long infeed fence, 1252 mm - I-Tronic package - Edge Control PPC 322 W control system - IntelliSet: intelligent tool correction - f.a.s.t = fast setting technology - ECO-Mode energy-saving mode - Preparation for RETURN connection (third-party device) - BS 501 guide: precise right-angled infeed for narrow edge banding - Workpiece thickness: min. 10 mm - Workpiece thickness: max. 60 mm - Workpiece length: approx. 140 - 450 mm - FG201 joint trimming unit with 2 milling heads, 64 mm height - MG 301 edge feeding system - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle for board tolerance compensation - NC axis for height adjustment - 90° swiveling for easy cleaning of the glue jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump extracts the reaction partner (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power connection and automatically compensates for any vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorized NC axis; first roller driven with pneumatic dipping control, 2 conical pressure rollers - GM301 spray unit after pressure unit with lubricant for high-gloss edges - KA 501 pneumatic end trimming unit (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 contour milling unit - ZK301 MOT4 scraper unit incl. high-gloss package - FK702 surface scraper - Complete release and cleaning agent spraying unit - GM 301 spray unit after pressure unit (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short-term Location: Hochheim

Sąlyga: naudotas, Gamybos metai: 2012, Base Machine Olimpic K 800 "T-ERL" (47) 1 pc BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal support of working units - Swiveling control panel - Support roller conveyor with ball-bushing guides along the entire machine length - Protective and soundproof hood with separate doors between the glue and finishing units - Extraction nozzles placed on the soundproof hood - Electrical system with lockable main switch - Emergency stop buttons at both infeed and outfeed - Inverter for electric spindles PANEL FEED SYSTEM: - Feed chain with rubber glide pads, mounted on a 1 ¼ industrial chain with high friction coefficient - The chain runs on two guides made of hardened and ground steel, one round and one flat guide to guarantee straight feed and to protect against lateral offset - Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction and equipped with double rows of rollers and protective device for the pressure rollers - Manual lifting of the pressure system with automatic positioning of working units when changing panel thickness - Mechanical digital display for monitoring the selected panel thickness CONTROL: "ORION 100" Control device complete with PLC allows for fast, simple and error-free execution of individual processing programs (up to 60 programs). Manages the pneumatic positioning of units, if present on the machine. (The control system does not include pneumatic positioning features.) - Alphanumeric keypad and display - Function keys for quick control of processing units - Ambient temperature operating range 0 to +45°C MAIN FUNCTIONS - Control of processing units and automatic activation of motors - Monitoring and adjustment of glue pot temperature - Selection for longitudinal or transversal processing without program change - Simple, guided diagnostics for easy troubleshooting - Statistics on absolute data and individual operations: quantity, edge material consumption, total feed chain distance - Measurement units selectable in mm or inch Technical Data OLIMPIC K800 T-ER L Edging thickness: 0.4 to 8 mm Max. gluing thickness for edge tape: 3 mm Feed speed: 12/18 m/min Working height: 8 to 60 mm Max. edge section dimensions: 135 mm² Turntable diameter: 780 mm Max. excess compared to panel thickness: 4 (2+2) mm Min. panel width (with min. panel length 210 mm): 55 mm Min. panel length (with min. width 100 mm) - with strip or tape edging max. 3 mm: 140 mm - with solid wood edging: 200 mm Min. distance between successive panels at m/min 11 (16): 750 (850) mm Standard Equipment - Pre-milling unit at infeed RT-E - Gluing station VC-800 - End trimming unit KSEL - Flush trimming unit, tiltable RI/800 - Corner rounding unit ROUND K - Scraper unit RAS-V Bedoxq Apgepfx Admslr - ½ free space for surface scraper - 1 free space S for surface scraper or universal router or buffing unit - 1 free space F for air nozzle unit European safety regulations (CE mark) 1 pc Voltage 400 EU 1 pc Frequency 50 Hz "Autoset" for versions ER2, T-ERS and T-ERL 1 pc Allows all necessary adjustment operations to be performed from the control panel when switching between processing operations. Includes: - Time-controlled pressure system - Pneumatic and independent swiveling of the end trimming saw blades (front / rear) - Pneumatic remote adjustment for the flush trimming unit RI/800

Sąlyga: naudotas, Gamybos metai: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: The machine has been completely overhauled: - New Glue Jet 301 glue application system (upper part 1 mm) - All units checked - All milling cutters sharpened - All knives replaced Bljdpfx Adewka Iiemsr Electrics for stepless feed: 400 V / 50 Hz, 2.2 kW Motorized pressure bridge adjustment Automatic chain lubrication Control PPC 315 with 15" touchscreen ECO MODE energy-saving mode Infeed fence 1350 mm, motorized adjustment Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for panel edge jointing - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit Edge feeding 1901 fully automatic Gluing station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Storage hopper for granulate Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right-hand rotation with CM technology Scraper unit 1929 MOT2: - Carbide reversible blades for scraper holder R = 2.5 mm (2 pcs. required) Flat scraper 1964 Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Sąlyga: naudotas, Gamybos metai: 2011, pneumatinis frezavimo nustatymas (tiesus/radiusas) Kombinuota frezavimo stotis R=2 Kampų apvalinimo freza R=2 iki 40 mm Sujungimo freza iki 40 mm Plokščias grandiklis Profilinis grandiklis R=2 trumpoms detalėms Valdymas SPS su Pro Face jutikliniu ekranu Nestingas Aušinimo/antistatika purškimas - airtronic Apsauginis briaunos purškimas Riepe su keičiamu rezervuaru Ruošinio storis: 8–60 mm Mechaninis briaunų spaudimas Ištraukimo jungtis: 140 mm Matmenys: Ilgis su išsikišimu: 4984 mm Gylis su ritininiu stalu: 1425 mm Maks. aukštis: 1618 mm Darbo stalo aukštis: 888 mm Svoris: 1400 kg Bedpexyiiljfx Admjlr Sandėliavimo vieta: Nattheim

Sąlyga: naudotas, Sandėlio vieta: Sonnefeld Blodpfx Ajway Dcedmor

Sąlyga: naudotas, Gamybos metai: 1994, Briaunos storis 0,3 - 20 mm Briaunos aukštis: maks. 66 mm Briaunos ilgis: min. 200 mm Ruošinio plotis min. 60 mm Ruošinio ilgis min. 140 mm Ruošinio storis: min. 6 mm, maks. 60 mm Padvigubimas 8 arba 16 m/min - Briaunavimas su Ultra - Granupress - Galinis pjovimas su 2 pjūklais, pasukami 0 - 15° - Frezavimas, spindulys / lygiai - Kampų kopijavimas - Grandiklis - Pneumatinis poliravimas Sandėliavimo vieta: Nattheim Bljdpfjvvkdtex Admer

Sąlyga: naudotas, Gamybos metai: 1996, Krašto storis: 0,4 - 12 mm Ritininio krašto storis: 3 x 45 mm arba 0,8 - 60 mm Minimalus ruošinio plotis: 65 mm Minimalus ruošinio ilgis: 160 mm Ruošinio storis: 10 - 55 mm Pasiūla: 13 m/min Išankstinis frezavimas (sujungimas) Klijų rezervuaras Quickmelt Klijavimo mazgas Nupjovimas Briaunos frezavimas Fasavimo frezavimas Spindulinis frezavimas Kampų kopijavimas Plokščia traukimo ašmenys Šlifavimo agregatas Staklių matmenys: 7450 x 1220 x 2400 mm Svoris: 3000 kg Sandėliavimo vieta: Nattheim Bedovvkd Tepfx Admjlr

Sąlyga: naudotas, Gamybos metai: 2009, HOLZ-HER Edgebander CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speed: Infinitely variable feed from 12–30 m/min (depending on equipment) - With adjustable infeed table in the magazine area (max. adjustment range 30 mm) - With height-adjustable magazine disc for modifying the lower edge overhang - Large magazine disc Ø 820 mm for edge coils up to Ø 800 mm - With transport chain incl. automatic central lubrication - With motor-driven, position-controlled bridge height adjustment - With pneumatic stop roller for shortest workpiece spacing - With extendable workpiece support (extension length 1600 mm) - With space-saving, pneumatically operated sliding hoods over the entire machine (deviations possible on individual aggregates) - With motorised infeed fence - With spray oiler for lubricating all joints and bolts (including operating hour counter) - With central connection for extraction (2x Ø 200 mm) - With integrated chip collection box at the end of the machine (when radius scraper unit installed) Control PPC 231 - Power PC for efficient setup and tool changes - 15” SVGA touch screen - CF memory card 128 MB - USB port on board - Ethernet network connection Bedpfxsvvkfds Admolr - Keyboard connector on board - Windows-like user interface - All information in clear text and/or graphics - Rotatable and swivelling operator console at eye level - Dust-proof membrane keypad with soft keys (pushbuttons) - LED indicator for aggregate preselection - Program list with program names and numbers - Extensive program memory - Individual selection of aggregates with functions for basic settings, set point values, position points, and tool corrections, as well as fixed position points - Setup operations for aggregates and axis settings centrally and clearly via fine adjustment (depending on equipment) - Interval display for minimum workpiece distance - Integrated position control - Position points generally or program-specifically controlled - Clear and complete capture of all operating data - Service messages in plain text - Diagnostic system - Incl. integrated synchronous bus system for high accuracy in aggregate control - Individual management for up to ten users, incl. password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 – Belt bridge Options and accessories for the base machine Spraying unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled separating agent spray unit with separating agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing milling unit 1961 and flat scraper 1964) Jointing milling unit Jointing milling station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) - With two plunge-controlled milling units - 1 unit counter-rotating - 1 unit co-rotating - Plunge depth 5 mm - With static frequency converter 200 Hz - Without milling cutters - With ProLock screw-in chuck for quick tool change Tooling for 1803 (workpiece height up to 60 mm): Diamond cutters PRO UT, 2 pcs. (front and rear) incl. protective hoods Ø 100–63 - Ø 30 mm, Z = 3 + 3 + 3, 1x LH, 1x RH Noise-reduced cutter with integrated chip guide, DFC technology (Leitz system) Maximum chip removal 2 mm at 60 mm height