Kraštų juostų klijavimo mašinos 1 KETVIRTIS

HOMAG PROFI KAL330/7/A3/WZ

Sąlyga: naudotas, Gamybos metai: 2009, HOLZ-HER Edgebander CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speed: Infinitely variable feed from 12–30 m/min (depending on equipment) - With adjustable infeed table in the magazine area (max. adjustment range 30 mm) Tsdpevvkfdefx Ag Rjf - With height-adjustable magazine disc for modifying the lower edge overhang - Large magazine disc Ø 820 mm for edge coils up to Ø 800 mm - With transport chain incl. automatic central lubrication - With motor-driven, position-controlled bridge height adjustment - With pneumatic stop roller for shortest workpiece spacing - With extendable workpiece support (extension length 1600 mm) - With space-saving, pneumatically operated sliding hoods over the entire machine (deviations possible on individual aggregates) - With motorised infeed fence - With spray oiler for lubricating all joints and bolts (including operating hour counter) - With central connection for extraction (2x Ø 200 mm) - With integrated chip collection box at the end of the machine (when radius scraper unit installed) Control PPC 231 - Power PC for efficient setup and tool changes - 15” SVGA touch screen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - All information in clear text and/or graphics - Rotatable and swivelling operator console at eye level - Dust-proof membrane keypad with soft keys (pushbuttons) - LED indicator for aggregate preselection - Program list with program names and numbers - Extensive program memory - Individual selection of aggregates with functions for basic settings, set point values, position points, and tool corrections, as well as fixed position points - Setup operations for aggregates and axis settings centrally and clearly via fine adjustment (depending on equipment) - Interval display for minimum workpiece distance - Integrated position control - Position points generally or program-specifically controlled - Clear and complete capture of all operating data - Service messages in plain text - Diagnostic system - Incl. integrated synchronous bus system for high accuracy in aggregate control - Individual management for up to ten users, incl. password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 – Belt bridge Options and accessories for the base machine Spraying unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled separating agent spray unit with separating agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing milling unit 1961 and flat scraper 1964) Jointing milling unit Jointing milling station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) - With two plunge-controlled milling units - 1 unit counter-rotating - 1 unit co-rotating - Plunge depth 5 mm - With static frequency converter 200 Hz - Without milling cutters - With ProLock screw-in chuck for quick tool change Tooling for 1803 (workpiece height up to 60 mm): Diamond cutters PRO UT, 2 pcs. (front and rear) incl. protective hoods Ø 100–63 - Ø 30 mm, Z = 3 + 3 + 3, 1x LH, 1x RH Noise-reduced cutter with integrated chip guide, DFC technology (Leitz system) Maximum chip removal 2 mm at 60 mm height

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Machining center Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working range X: 2,500 mm Working range Y: 1,300 mm Working range Z: 4 - 80 mm Number of routing units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: Swivels 90° X-axis speed: 130 m/min Y-axis speed: 80 m/min Tedjh E Sghjpfx Ag Ref Z1-axis speed: 50 m/min Z2-axis speed: 27 m/min Spindle speed: 18,000 rpm Dismantled - available immediately

Sąlyga: naudotas, Gamybos metai: 2010, Touchscreen control for adjusting work groups Panel height from 10 to 50 mm Solid wood 12 mm PVC/ABS mm from 0.4 to 3 Feed speed up to 22 m/min Minimum panel length 150 mm Minimum panel width 70 mm Electronically adjustable working height via CNC Motorized, rubber-coated upper pressure belt Support guide for panels Side roller track with idler rollers for panel support Anti-adhesive unit Pre-milling unit with two motors, each 1.5 kW Roller holder plate COMBIMELT gluing system for hot melt adhesive with automatic VarioMelt dosing and pre-melter Patented edge pressure unit with segmented pads Trimming unit with 2 motors Corner rounding unit with 2 motors Corner rounding unit Tsdpfx Ajpzfcgeg Ref Scraper unit for edges Installed power: 13.7 kW Machine length: approx. 6170 mm TECHNICAL DETAILS TO BE VERIFIED

Sąlyga: labai geros būklės (naudotas), TECHNISCHE DATEN NICHT VON DIESER MASCHINE Rücklaufeinrichtung für Kantenanleimmaschine (LINKS) In Kombination mit einer einseitigen Kantenanleimmaschine ermöglicht sie einem einzelnen Bediener die kontinuierliche Beschickung der Maschine. Luftschleierbank, Einlauf und Auslauf (Gesamtabmessungen 3.520 x 2.560 mm) 180°-Transfer (3.120 x 2.140 mm) mit motorisierten Rollenbahnen und motorisierten Bändern Motorisierte Fördermatte (9.080 x 1.560 mm) Werkstückmaße (MIN/MAX): Länge – 240 mm / 2.800 mm Tedpfx Aoff R Tqsg Rsf Breite – 120 mm / 1.300 mm Dicke – 8 mm / 60 mm, optional bis 100 mm

Sąlyga: labai geros būklės (naudotas), Pressure Beam Saw HOLZ-HER 6210 CUT 85 -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, Tsdjwz Rkcepfx Ag Rsf air cushion tables, feed rollers, infinitely variable feed of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,250 mm, Cutting width: 4,250 mm, Max. Cutting height: 85 mm, Number of clamps: 7 pcs, Number of trimming stops: 3 pcs, Main saw motor power: 11 kW, Scoring unit motor power: 2.2 kW, Main saw blade diameter: 350 mm, Scoring saw blade diameter: 180 mm, Extraction port diameter below: 140 mm, Extraction port diameter at pressure beam: 2 x 120 mm, Compressed air connection: min. 6 bar Quality Info: - Saw shaft newly mounted - Scoring unit newly mounted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Immediately ready for operation

Sąlyga: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 Triple spindle under-table router by RUWI Professional equipment for the workshop This under-table router enables easy chamfering, edge rounding, profiling, grooving, sanding, and various other milling tasks to quickly achieve the desired result. Fast tool changes are possible thanks to accessible tool storage. Larger models increasingly reduce setup times. Costly and time-consuming fine adjustments and test routings are eliminated when equipped with all essential tools. The spindle can be continuously adjusted to the required working position. This model is ideal for workshop use and is frequently employed for final finishing. Made in Germany. Features and technical data: - High-quality workmanship - 3 tools available at any time - Electronic control prevents speed fluctuations under load - Robust, high-capacity motor - Motor with overload protection Todpfx Agsrk Tqko Rof - Temperature monitoring with PTC resistor - Soft start and inrush current limiter - Counter-rotating return thread above the ball bearings reduces ingress of dust and dirt - Quick tool change - Dust extraction above and below the table top - 1x fine adjustment - Includes stop ruler - Includes mounting kit for table extension - Convenient tool change from above - BG and wood dust tested Technical data: - Table size: 640 x 500 mm - Table height: 910 mm - Continuously variable speed control: 8,000 - 25,000 rpm - Tools available: 3 - Milling stroke: 43 mm - Motor power: 1,050 watts for continuous industrial use - Voltage: 230 V - Milling spindle: 22 mm diameter - Collets: 8 mm (standard), optionally also 6 mm, 6.35 mm and 10 mm - Extraction port: 120 mm - Mobility: 4 swivel castors - Weight: 91 kg Availability: short-term Location: Solingen

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, One-sided laser and PU edge banding machine incl. workpiece return feed Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return feed type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting unit - Feed rate 18–25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15–25 m/min Workpiece thickness: 8–60 mm Workpiece width min.: 60 mm Edge material (roll): 0.3–3 mm Edge material (strip): 0.4–20 mm Control: PC22 Control system: Powertouch Units & Gluing Jointing unit S2 Automatic horizontal adjustment jointing Automatic vertical adjustment jointing LaserTec activation unit Performance Basic gluing station A20, expansion module Expansion magazine for 6 rolls Horizontal freestanding roll table Continuously adjustable edge pressure device Suction device for edge strip separation Servo edge feed Edge thickness measurement for rolled material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue quantity dosing Balti melting unit Automatic pressure zone adjustment Wetting device for pressure zone Release agent spray unit top/bottom End trimming unit HL86 bevel/straight 0.22 kW Servo Pneumatic adjustment trimming motor Automatic trimming fence adjustment Pre-milling unit BF20 Pneumatic adjustment pre-milling unit Multi-milling unit MF21 Servo Release agent spray unit top Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 Servo with chip breaker Finishing unit FA11 top/bottom, consisting of: Glue joint scraper blade Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment: Tjdpfx Agjxgrfpo Rof Edgebanding of solid wood edges Automatic infeed fence adjustment (one-sided) Infeed extension 500 mm Sliding carriage Workpiece support – scissor type Extension for scissor type Workpiece thickness 8 mm instead of 12 mm Potential-free contact Flexible edge sequence control software Gap processing Workpiece return feed ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters: Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8–30 m/min

Sąlyga: labai geros būklės (naudotas), Formatinė pjovimo staklė Martin T72a Vagono ilgis: 3200 mm Pjovimo plotis dešinėje: 1250 mm Didžiausias pjovimo aukštis: 170 mm Priešpjovė Hidraulinis pjovimo aukščio reguliavimas Hidraulinis pjovimo kampo reguliavimas Dešinysis liniuotės valdymas hidrauliškai Pjūklo diskų dydis min/max: 200-500 mm Priešpjovės disko dydis: 120 mm Reguliuojamas pjūklo greitis diržais: 2800-4000-5500 aps./min Pagrindinis variklis 5,5 kW Priešpjovės variklis 0,75 kW CE sertifikatas Techninė dokumentacija Tjdpexapvxefx Ag Rsf

Sąlyga: naudotas, Gamybos metai: 2006, IMA Novimat Edge Banding Machine: Manufacturer: IMA Model: Novimat Concept/I/G/80/650/R3 Year of manufacture: 2006 Machine number: 08113 Nominal power: 41 kW Workpiece feed: Glide chain Fence ruler: Adjustable fence ruler 700.080 Infeed table: 63.152 Milling unit: 08.378 Glue level sensor: Available Glue application unit: 04.0832 Bonding unit: 04.1570 PU premelter: 283.203 High-speed tool holder: For high-speed motors End trimming unit: 08.42 Milling unit: 08.0555 Tjdsrnkw Dspfx Ag Ref Multi-processing unit: 08.348 Multi-profile scraping device: 08.516 Flat scraper: 08.517 Profile copying buffing unit: 08.604 Buffing unit: 08.617-4 Safety equipment: Light barriers, temperature controller, control terminal Additional equipment: Pre-mounted roller conveyor table Total machine length: Approx. 11 / 16 m Extraction system: Included Accessories: Edge magazines: 2 sliding magazines for edging coils, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma units Control cabinet Panel return system (Manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, various table lengths Round belt conveyor table Control cabinet system 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system

Sąlyga: geras (naudotas), CNC machining center WEEKE OPTIMAT BHX 500 Including material feeding system "IgeL-ROBOT" Lower machining support Upper machining support Workpiece length: min. 250 – max. 2500 mm Workpiece width: min. 70 – max. 1000 mm Workpiece thickness: min. 4 mm – max. 80 mm Workpiece stacking: max. 2 pieces Todpfx Aotd Uufeg Ref Vector speed: X-axis collet = 138 m/min; Y-axis = 80 m/min; Z-axis = 50 m/min Equipment: VERTICAL DRILLING UNIT 2 V 21 HIGH SPEED 7500 HORIZONTAL DRILLING UNIT 2H4X/2Y GROOVING SAW UNIT N2 X-Y 90 MILLING UNIT F2-ETP-6 KW Barcode reader, Manufacturer: Datalogic Material feeding system "IGEL-ROBOT".