Pamačiau Visiškai Automatiškai pirkti naudotą (11 717)

Gamybos metai: 2025, Sąlyga: naujas, Sealing of cans via crimping, maximum machine cycle rate in idle: 30 cycles/min; Can dimensions: diameter: 35-130 mm, height: 50-200 mm; Power supply: 220/380V, 1.1 kW; Machine dimensions and weight: L3000×W900×H900 mm, 450 kg. The machine/system is also available in different versions for various packaging sizes and packaging speeds. Psdpfjv Nk Tnex Ah Hepl Please note that our new prices are often lower than the usual prices for used equipment. Feel free to contact us and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock at all times. For custom-built machines, we offer very short delivery times, starting from approximately 3 weeks. – All machines come with a full warranty.

Sąlyga: naujas, Gamybos metai: 2025, M-version of the vertically operating angle sealing machine for shrink packaging. Ideally combined with the AMTEC SHRINKtunnel POF-M (High-Speed). - Specifications: maximum machine cycle rate in idle mode: 35 cycles/minute. The sealing unit operates in an extremely stable vertical position thanks to its 4-column design and applies consistent pressure to the shrink film. Excellent seal quality with minimal creasing. Sealing frame height and pressure are adjustable. Easily adjustable perforation module. Optionally available: feeding systems for CD, DVD, etc. Specifications: Packing sizes: (L + H) max. 500 mm where H < 180 mm and (W + H) max. 400 mm where H < 180 mm; sealing blade lengths: horizontal = 623 mm, vertical = 500 mm; Power: 220V/2.8kW; Machine dimensions and weight: L1850 x W1350 x H1300 mm, 800 kg. Podpfxsv Nl Aqo Ah Hjpl Please note that our new prices are often below typical used market prices. Feel free to contact us and tell us about your packaging application. - We usually have 30–50 different new machines available from stock for immediate delivery. For custom-built machines we also offer very short lead times from approx. 3 weeks. - All machines are offered with full warranty.

Sąlyga: naujas, Gamybos metai: 2025, XL version of the vertically operating L-sealing machine for shrink wrapping. Ideally combined with the AMTEC SHRINKtunnel POF-XL (High-Speed). - Specifications: maximum machine cycle rate in idle mode: 35 cycles/minute. The sealing unit operates in an extremely stable vertical position thanks to its 4-column design and applies very even pressure to the shrink film. Outstanding sealing results with minimal wrinkling. The height and pressure of the sealing frame are adjustable. Easily adjustable perforation module. Optional: feeding systems for CD, DVD, etc. - Specifications: Packaging dimensions: (L + H) max. 800mm with H < 180mm and (W + H) max. 650mm with H < 180mm; sealing blade length: longitudinal side = 903 mm, transverse side = 750 mm; power supply: 220V/3.5kW; machine dimensions and weight: L2430xW1550xH1300mm, 930kg. Please note that our new prices are often below typical used machine prices. Simply enquire and let us know your packaging requirements. - Typically, 30-50 different new machines are available from stock for immediate delivery. For custom-manufactured machines, we offer very short lead times from around 3 weeks. - All machines come with a full warranty. Pedpfxev Nl A Ds Ah Hopl

Sąlyga: naujas, Gamybos metai: 2025, PRO version of the vertically operating L-sealer for shrink packaging. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO version. The machine operates in an extremely stable vertical position thanks to its 4 columns and applies a very uniform pressure to the shrink film. Excellent sealing results with minimal wrinkling. Height and pressure of the sealing frame are adjustable. Easily adjustable perforation module. Sliding conveyor (kissing table) for processing products with lengths under 50 mm. Feed systems for CD, DVD, etc. optionally available. - Specifications: Conveyor belt speed: 26 m/min; max. machine cycle rate in idle operation: 40 cycles/minute; packaging sizes: L(60-560)xW(60-430)xH(10-180), W+H Psdsv Nl Dzspfx Ah Hspl

Sąlyga: naujas, Gamybos metai: 2025, PRO version of the vertically operating L-sealing machine for shrink packaging. Ideal in combination with the AMTEC SHRINKtunnel POF-XL (High-Speed) PRO version. Thanks to its 4-column design, the machine operates in an extremely stable vertical position and applies very even pressure to the shrink film. Provides excellent sealing results with minimal wrinkling. Sealing frame height and pressure are adjustable. Easily adjustable perforation module. Feed systems for CDs, DVDs, etc. available as options. - Specifications: max. machine cycle rate (no load): 40 cycles/minute; packaging dimensions: L(200-830)xW(200-630)xH(10-180), W+H Ppedpfov Nl D Iox Ah Hol

Sąlyga: naujas, Gamybos metai: 2025, PRO version of the vertically operating L-sealer for shrink packaging. Ideal in combination with the AMTEC SHRINKtunnel POF-XXL (High-Speed) PRO version. The machine operates with extreme stability in a vertical position thanks to its 4-column design, applying consistent and even pressure to the shrink film. Excellent sealing results with minimal wrinkling. The height and pressure of the sealing frame are adjustable. Easily adjustable perforation module. Feed systems for CD, DVD, etc., available as optional accessories. - Specifications: max. operating cycle in idle mode: 40 cycles/minute; packaging dimensions: L(200-830)xW(200-630)xH(10-300), W+H Podpfx Aev Nl D Ueh Hopl

Sąlyga: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangle 1250 x 600 mm Cutting capacity at 45 degrees: round 680 mm Cutting capacity at 45 degrees: square 600 mm Cutting capacity at 45 degrees: flat 870 x 600 mm Cutting capacity at 60 degrees: round 580/550 mm Cutting capacity at 60 degrees: square 530/450 mm Cutting capacity at 60 degrees: flat 550 x 450 mm Saw blade length: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 5.3 t Ppjdpfx Ajfg E Hnjh Hsl Required floor space approx. 5.75 x 4.2 x 2.75 m 2-column double mitre band saw for fast cutting equipped with pusher system P15; option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to -60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Highest positioning accuracy is achieved with the new B&S Positioning System. An intelligent NC control ensures smooth interplay of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake via large-diameter central positioning. The work table is mounted on high-quality preloaded bearings, which ensure smooth and easy rotation. CNC control A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning system, is equipped with ‘dual-side opening gripper tongs’ which are hydraulically controlled. This guarantees secure gripping and transportation of materials and bundles that deviate slightly from the ideal form. The pusher system is set up separately and is guided by ball-bearing linear guides, a precision-ground rack, and a frequency-controlled, robust geared motor.

Sąlyga: naujas, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL PROMOTION PRICE!!!! 2-Column Heavy-Duty Bandsaw Machines of the SBS Series The SBS series stands out with advanced engineering, high quality, durability, and an unrivaled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Driven chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vise (before and after the blade) Ppsdpfx Ajfb Nbfoh Hol • Creep speed for positioning • Bundle clamping prepared for electric and hydraulic systems • Chip conveyor The SNC 20 control allows easy and straightforward input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the material allowance and the number of feed cycles. In addition, the error code display system enables fast analysis for troubleshooting.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 310 mm Cutting capacity at 90 degrees: square 280 mm Pedpjd Iiprofx Ah Hspl Cutting capacity at 90 degrees: rectangular 400x250 mm Saw blade dimensions: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Total power requirement: 2.2 kW Machine weight approx. 0.99 t Space requirement approx. 1.85 x 2.2 x 2.0 m Mitre Band Saw, Fully Automatic, GBS 310/400 VA-I CNC - Mitre left 45° automatic operation - Mitre left 60° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gearbox made from one casting, very quiet and low-vibration cutting - Removable chip tray (for cleaning) - Shockproof and ergonomic control panel with oil-resistant EPDM cover - Excellent accessibility to saw, material and feed unit - Safety cover foldable - Fine feed adjustment - Semi-automatic cutting! - CNC control for optimizing workflows Input options for different parameters such as quantity and material lengths, automatic calculation of cutting kerf - CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with multiple section lengths - Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, remnant piece length 170 mm.

Sąlyga: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 1250x600 mm Saw blade length 8140x54x1.6 mm Band speed 15 - 90 m/min Table height 855 mm Ppodpfx Aefgyigjh Hol Total power requirement 7.5 kW Machine weight approx. 4.96 t Space requirement approx. 5.7 x 4.0 x 2.75 m 2-Column Bandsaw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid materials. Material is clamped vertically on the infeed and outfeed sides. Starting from the K-tech 800 H, the machine is equipped as standard with an additional horizontal vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines are standard equipped with the environmentally friendly “B&S Clean Cut cutting system” featuring minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control The CNC control allows programming of up to 90 cutting programs with different cut lengths, batch quantities, and mitre angles. The B&S pusher system, feed and positioning system, is equipped with "double-sided opening gripper tongs" that are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is designed as a separate unit and is guided via ball-bearing linear guides, a precision-ground rack, and a frequency-driven robust gear motor.

Sąlyga: naujas, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 – 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double mitre band saw for rapid cutting with pusher system P15. Option P30 available. Hydraulic saw frame lowering • NC controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially engineered for cutting profiles and beams. Maximum positioning accuracy is achieved by the new “B&S positioning system”. An intelligent NC control unit ensures smooth interaction between the linear encoder and the self-braking positioning motor, combined with a reliable hydraulic brake via large-radial central positioning. Pjdpjfg E Hmefx Ah Hspl The work table is mounted on high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control The CNC controller enables programming of up to 90 cutting programs with varying cut lengths, quantities, and mitres. Double-sided clamping positioning system The B&S pusher system, feeding and positioning unit, is equipped with "double-sided opening gripping tongs" that are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate from the ideal shape. The pusher system is constructed separately and guided by precision ball-bearing linear guides, ground rack and pinion, and a heavy-duty, frequency-driven gear motor.

Sąlyga: naujas, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Bandsaw blade length: 5,450 x 41 x 1.3 mm Table height: 800 mm Blade speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.2 t Ppodpfxefg E Hve Ah Hol Dimensions (L x W x H): 2,675 x 2,150 x 2,050 mm SPECIAL PRICE OFFER!!!! 2-column high-performance automatic bandsaws of the SBS series The SBS series stands out with its advanced technology, high quality, durability, and an exceptionally comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tension • Clamping pressure regulation • Double vice (before and after the blade) • Inch mode for positioning • Bundle clamping prepared for electric and hydraulic control • Swarf conveyor The SNC 20 controller allows easy and straightforward input of up to 20 different sawing jobs (length and quantity). When the desired dimension is entered, the control system automatically calculates both kerf loss and the required number of feed cycles. In addition, the error code display system provides rapid fault diagnosis for troubleshooting.

Sąlyga: naujas, Cutting range at 90°: round 255 mm Cutting range at 90°: square 240 mm Cutting range at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 – 110 m/min Total connected load: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 250 Super VA-I MPS • Mitre left 45°: automatic mode • Mitre left 60°: semi-automatic mode (cuts without programming) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet and low vibration cutting • Removable chip tray (disinfection) • Excellent access to saw, material, and feed unit Pjdped Iip Ajfx Ah Hopl • Foldable safety cover • Fine feed adjustment • Semi-automatic cut! Automatic sawing with microprocessor control Selectable for 2 program levels Semi-automatic mode Fully automatic mode Start after entering the required number of pieces and length: initial material cut, cutting process, and piece counting continues until the program is completed • MPS controller for entering the required number of feed cycles • All important machine data (power consumption, cutting time, number of pieces) is displayed on the LED display during the cutting process • Entered data is stored in the RAM memory • The self-diagnostic circuit automatically displays all irregularities as error messages and monitors the complete process • Feed unit mounted on floating bearings • Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm, or repeatable via reversing automatic 1 – 29 times, remainder piece length 210 mm

Sąlyga: naujas, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400 x 330 mm Saw band length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m Ppsdsfb Nbgopfx Ah Hel SPECIAL PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series impresses with sophisticated technology, high quality, durability, and an unrivaled comprehensive standard equipment package. - Modern SNC 20 controller for CNC versions - Frequency-controlled saw drive - Operating buttons with pictograms - Work light - Driven chip brush - Hydraulic band tension - Adjustable clamping pressure - Double vice (before and after the band) - Creep mode for positioning - Bundle clamping prepared for electric and hydraulic operation - Chip conveyor The SNC 20 controller allows convenient and straightforward input of up to 20 different cutting tasks (length and quantity). When the target dimension is entered, the controller automatically calculates the kerf waste and the number of feed strokes required. In addition, the error code display system offers rapid fault diagnosis for troubleshooting.

Sąlyga: naujas, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw band dimensions: 5980 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Ppodpfefg E Hwex Ah Hol Machine weight: approx. 3.8 t Dimensions (L x W x H): 3.0 x 2.15 x 2.2 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series stands out with its advanced technology, high quality, durability, and a uniquely extensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vice (before and after the saw band) • Creep mode for positioning • Bundle clamping electrically and hydraulically prepared • Chip conveyor The SNC 20 control allows simple and user-friendly input of up to 20 different sawing operations (length and quantity). When entering the target dimension, the control system automatically calculates the trim cut and number of feed strokes. Additionally, the error code display system enables quick diagnosis for troubleshooting.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 510 mm Ppedpfofu Nbbox Ah Hel Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangle 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight: approx. 2.3 t Space requirements: approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation Material height sensor (automatic cut-start detection) Automatic feed unit via ball screw with incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush Feed vice with double-sided opening Minimum offcut length: 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw with incremental feed and automatic length compensation, adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping units Pre-selection of 3 different material feed speeds Visualization of the entire workflow with easy data input

Sąlyga: naujas, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Psdpfofm T Hbex Ah Hspl Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical band saw in dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard equipment includes: - Powered chip conveyor, mountable on either the right or left side of the machine. - Clamping pressure regulation of the machine vices. - Feeder with vertical rollers for lateral material support. - Sensors for material start detection. - Clamping pressure regulation. - Storage for up to 300 programs. - The machine is available with either a 34 mm or 41 mm blade at no extra cost. Price on request.

Sąlyga: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820 x 610 mm Ppodpfx Aefgyifjh Hel Saw blade length: 5850 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirements: approx. 5.85 x 3.6 x 2.7 m 2-column band saw for high-speed cutting, K-tech 800H with pusher system P 15. P 30 (option). Fast, smooth and ergonomic cutting. Specially developed for cutting profiles and beams as well as solid material. Material clamping is done vertically on both the infeed and outfeed sides. Starting from the K-tech 800 H, the machine is equipped as standard with an additional horizontal clamping vice. The combined action of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly B&S Clean Cut cutting system featuring minimal quantity lubrication. This reduces cleaning requirements and conserves resources. CNC Control A CNC control unit allows programming of up to 90 cutting programs with different cut lengths, quantities, and angles. The B&S pusher system (feed and positioning system) is equipped with "double-opening hydraulic grippers," which are hydraulically operated. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal shape. The pusher system is built as a separate unit and guided by ball-bearing linear rails, precision-ground rack, and a frequency-driven, robust gear motor.

Sąlyga: naudotas, Automatic bundle delivery / Fully Automatic Banding Delivery Palamides BA 700 Year of manufacture: 2000 - Serial No. 0389 Online video inspection available via WhatsApp, MS Zoom, or Telegram. In stock in Emskirchen/Nuremberg - Immediately available - Can be tested on site. Ppedpfx Ahov Ay Uho Hel

Sąlyga: naudotas, Gamybos metai: 2008, Automatinė pakavimo pristatymo sistema / Palamides Delta 703 visiškai automatinė pakavimo linija, pagaminimo metai – 2008, serijos Nr. 2244 Internetinė vaizdo patikra per Skype-Video Maloniai laukiame Jūsų vizito – daugiau įrangos sandėlyje Ppsdpfstqgncjx Ah Hel Galima pristatyti iš karto – apžiūra galima Sandėlyje Emskirchen / Niurnbergas – galima išbandyti

Sąlyga: naudotas, Gamybos metai: 1998, mašinos/transporto priemonės numeris: 1941, Vollautomatische Hochleistungsstanze – Fully Automatic Punching System Kugler 340-2R Baujahr / Year: 1998 – Serial-No. 1941-340-2R Arbeitsbreite / Working width: max. 340 mm Format / Sheet size min.: 120 x 105 mm Format / Sheet size max.: 340 x 340 mm Stanzstärke / Punching thickness: max. 3 mm Mechanische Taktleistung / Mechanical cycles per minute: 80–100 cycles Anlegesystem für kontinuierliches Arbeiten / Paper feeding system for continuous operation Ppjdpfx Aeiypk Ssh Hjl Kastenauslage mit Rüttler / Delivery tray with jogger Inkl. Handbücher / Including manuals Online video inspection via Skype possible. We would be pleased to welcome you for an on-site visit – additional machines in stock. Immediate availability – machine can be inspected. Located in Emskirchen / Nuremberg – Test run possible.

Sąlyga: naudotas, Gamybos metai: 2009, Vollautomatische Hochleistungsstanze - Fully Automatic Punching System KUGLER-WOMAKO ProPunch 50-110 (R) Year of manufacture: 2009 - Serial No. MK00579 • Working width max.: 500 mm • Min. size: 120 x 105 mm Ppodeiypk Ispfx Ah Hel • Max. size: 500 x 500 mm • Maximum punching thickness: 3 mm • Mechanical cycles per minute: 110 cycles/min • Paper feeding system for continuous operation • Paper output with jogger • Incl. manuals • Power requirement: 4 kVA / 3 kW • Rated current: 10 A • 2 tools 3:1 pitch – 550 mm long Online video inspection possible via Skype-Video. We would be pleased to welcome you for a visit – more machines in stock. Available immediately – can be inspected. Located in Emskirchen / Nuremberg – test operation possible.

Sąlyga: geras (naudotas), Fully automatic with miter cutting, Max. diameter or cutting width: 180 mm, Smallest dimension to be cut: D 10 mm, Automatic feed, single: 600 mm, Psdpfxotqdvge Ah Hepl Max. feed length, multiple: 1800 mm, Minimum leftover length in single cut: 20 mm, Minimum leftover length in automatic mode: 110 mm, Table rotation range for miter cuts: 135 degrees, Total drive power: 3.2 kW, Weight without roller conveyors: 1100 kg, Coolant system, The saw is still connected to power, Function video available, Operating manual with circuit diagrams and spare parts lists.

Sąlyga: naujas, Fully automated system Energy savings Industry 4.0 Durma Cloud Podpfxsg Adn Ij Ah Hspl Fiber laser technology Environmental awareness Synchronous minimal working area High-precision repeatability High process accuracy Compact layout Low noise emission Simple and quick installation We will send you information material upon request.

Gamybos metai: 2016, Sąlyga: paruoštas naudoti (naudotas), A nearly new Anritsu X-ray inspection system is available. X-ray output: 100W, maximum detection width: 240mm, maximum detection height: 120mm, detection speed for 2kg to 5kg: 10m-60m/min, detection speed up to 2kg: 60m-90m/min, detection speed for 5kg to 10kg: 10m-40m/min, housing material: stainless steel, machine weight: approx. 255kg, operating hours: under 50h. The machine shows no signs of wear on the conveyor belt or radiation shielding curtains. Documentation available. On-site inspection is possible. Ppjdpfx Asvzr Aueh Hjl