Automatinis Presas pirkti naudotą (4 555)

Sąlyga: naudotas, Hydraulic toggle press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS Type AR 11-100.H Fine blanking press, toggle press Machine No. P247 Year of manufacture: 1991 Pressing force: 100 tons (1000 kN) Max. installation height: 380 mm Table area: 1100 x 700 mm Throat opening: 800 x 220 mm Ram area: 690 x 315 mm Column gap: 1150 mm Side column gap: 410 mm Strokes per minute: 45 and 80 Clamping pin bore: Ø 50 mm Compressed air requirement: 8-10 bar Hydraulic tank capacity: approx. 700 litres Main drive motor power: 22 kW Electrical connection: 400 Volt, 50 Hz, 28 kW - 2 speed settings for stroke rates (45 and 80 strokes/min.) - Electronic cam controller BALLUFF, type Minicontroller BMC4K - Electronic tool monitoring EBERLE, type PLS 509S - Pressing force monitoring KISTLER - Table with 22 mm T-slots and ram area with 14 mm T-slots - Electronic stroke counter - Motorized height adjustment for the ram Nsdpfxogp T Eus Abmslh - Centralized oil lubrication - Work area safeguarded by pneumatically operated protective screen - Control cabinet and electrical cabinet positioned outside the machine - 2 oil coolers with FLUTEC cooling fans (oil/air cooling) - Electrical schematic and PLC program printout available - Two-hand operation at the press Required footprint (control cabinet) L x W x H 700 x 700 x 2100 mm (approx.) Required footprint (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Required footprint (press) L x W x H 2350 x 1700 x 3300 mm Weight of press: 8500 kg Very good condition

Sąlyga: naudotas, Gamybos metai: 1995, Pressure: 100 t Stroke: 20 - 120 mm Strokes per minute: 40 - 240 /min Upright gap: 1,300 mm Shut height (stroke + ram adjustment, top): 670 mm Lateral frame clearance: 400 mm Table size: 1,200 x 800 mm Pass-through opening in table: 900 x 200 mm Table height above floor: 1,150 mm Ram area: 1,130 x 650 mm Ram adjustment: 80 mm Material width: 250 mm Material thickness: 0.3 - 3.0 mm Material cross-section: 750 mm² Feed length: 1 - 9,999.9 mm Drive power: 22.0 kW Weight: 16.0 t Required space (WxDxH): 3.7 x 2.5 x 3.7 m Height above floor: 3.7 m Njdpfjwc U Nlsx Abmjlh Approved for automatic operation according to CE standard with infinitely variable drive (PIV gearbox), pneumatic clutch/brake combination (Ortlinghaus), electronic press force monitoring (dual-channel), automatic stroke adjustment, motorized ram adjustment, pneumatic ram weight compensation, motorized oil circulation lubrication Electronic roller feed, make: Kaiser, model: KWV 250

Sąlyga: naudotas, Gamybos metai: 1992, Spaudimas 10 t Eiga 8-40 mm Eigos dažnis 120-600 eigos/min Stūmoklio reguliavimas 40 mm Stalo paviršius 380x240 mm Stūmoklio paviršius 220x140 mm Praėjimo anga stale 220x110 mm Stalo aukštis 910 mm Stūmoklio kaiščio skylė Ø 30 mm Iškyša 135 mm Mašinos svoris apie 1,2 t Njdpfx Aboxh Szajmjlh Užimama vieta apie PxGxA 1000x1500x2000 mm Pneumatinė sankabos-stabdžio kombinacija Rankinis eigos reguliavimas Rankinis stūmoklio reguliavimas Centrinis tepimas Sukamasis žnyplių padavimas

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1991, Slėgis 25 t Eiga 7–62 mm Eigos dažnis 120–600 eigų/min Njdsxiy Abspfx Abmelh Bendras galios poreikis 4 kW Mašinos svoris apie 2,5 t Su griebtuviniu padavimo įtaisu RC 11 Yra dokumentacija. Naudota mašina ir kitos naudotos dalys (viso paketo) parduodamos kaip apžiūrėta, be garantijos ir atsakomybės, laisvai pakrautos į sunkvežimį iš mūsų sandėlio Solingene.

Sąlyga: naudotas, Gamybos metai: 1993, veikimo valandos: 24 535 h, Funkcionalumas: visiškai funkcionalus, Haulik and Roos Press RVD 80-800HS Press force: 80 t Adjustable ram stroke: 4 - 60 mm Ram adjustment: 0 - 80 mm Table clamping surface approx.: 780 x 640 mm Ram clamping surface approx.: 800 x 460 mm Strokes per minute: 30 - 800 min-1 Feed MD 260 SL 2794 Feed 0-260 mm Maximum material thickness: 3 mm Material width: 10-260 mm Strip speed: 60 m/min Nlsdewz Urkspfx Abmsh Used condition Sale on behalf of a customer

Gamybos metai: 2024, Sąlyga: naujas, The PT-1050 belt press is a machine designed for extracting apple must. This process takes place between the machine's belt and precisely positioned press rollers. The extracted juice is pumped into the pasteurizer tank. The entire construction is made of AISI304 stainless steel. TECHNICAL DATA: - Capacity: up to 5,900 kg of apples per hour - Juice yield from pressed apples: up to 75% - Installed power: 3.4 kW, 230V - Water consumption: up to 6 l/min - Weight: 2000 kg - Belt width: 1,200 mm Nsdpfx Aeukq T Hebmolh - Adjustable belt speed - Juice tray with screen mesh ø 2mm - Juice pump

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, New machine 24 months warranty Features: + Excellent price-performance ratio + Standard version already includes: mobile machine, ideal for fast floor cleaning + Divider blades made of stainless steel + Coated knife head + Even dough division + Outstanding rounding of dough pieces + Ergonomic knife cleaning position (head swivels 90 degrees forward) + Easy and fast adjustment of the working chamber height + Side-mounted holder for rounding plates, immediately within reach STANDARD equipment: + 3 rounding plates included General technical data: Njdpfx Asivdnnsbmelh Power: 0.75 kW Electrical connection: 400V - 3Ph - 50Hz Fuse protection: 16A CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Net weight: 340 kg Size 4-30: Number of pieces: 14 dough pieces Piece weight: 130 - 400 grams (depending on dough/product) Dough input: 1,820 - 5,600 grams (depending on dough/product) Optionally available: - Additional rounding plates Surcharge: €110 net / each

Sąlyga: naudotas, Gamybos metai: 1997, Spaudimas 130 t Atstumas tarp kolonų 1600 mm Eiga 8 - 140 mm Eigos dažnis 50 - 200 eigos/min Įrengimo aukštis (eiga + slankiklio reguliavimas viršuje) 520 mm Šoninis praėjimas tarp kolonų 610 mm Stalo paviršius 1600 x 880 mm Pravažiavimo anga stale 1000 x 350 mm Stalo aukštis nuo grindų 950 mm Slankiklio paviršius 1600 x 880 mm Variklio galia 24,2 kW Staklių svoris apie 28,00 t Reikalinga erdvė apie 4,3 x 2,2 x 3,8 m Slankiklio reguliavimas 100 mm Patvirtinta automatiniam darbui pagal Vokietijos nelaimingų atsitikimų prevencijos taisykles (UVV) su bepakopiu reguliuojamu pavaros varikliu, hidrauline sankabos/stabdžio kombinacija, hidrauline viršslėgio apsauga slankiklyje, pneumatinė slankiklio svorio kompensacija, variklinis slankiklio reguliavimas, automatinis eigos reguliavimas, aštuonkrūpis ritininis vedimas, elektroninis ritinėlių padavimas (Hensel, EVX 500) su hidrauliniu tarpine vėdinimu 2025 – vyksta: nauja valdymo ir saugos elektronika – Siemens S7-1500F, patogus valdymas per jutiklinį ekraną Nljdpfjvuugcex Abmeh Demontavimo metu pas tiekėją prieinamas vaizdo įrašas

Sąlyga: naujas, Gamybos metai: 2025, Spaudimas 75 t Eiga 8–80 mm Nlsdpfxsxh Swuo Abmsh Eigos dažnis 80–200 eigų/min Stūmoklio reguliavimas 70 mm Stalo paviršius 900x600 mm Stūmoklio paviršius 900x470 mm Praėjimas per stalą 450x180 mm Praėjimas tarp rėmų – šoninis 500x350 mm Praėjimas tarp kolonų (šoninis) 788 mm Bendra galia apie 10 kW Staklių svoris apie 10 t Užimamas plotas apie IxPxA 1600x1200x2800 mm Cirkuliacinė alyvos tepimo sistema Reguliuojama hidraulinė apsauga nuo perkrovos Stūmoklio kompensavimo cilindras Reguliuojamas presavimo jėgos stebėjimas Terminis guolių stebėjimas Pneumatinė sankabos ir stabdžio kombinacija Pneumatinės apsauginės durys priekyje Šviesos užuolaidų apsauga priekyje Atveriamos durys gale 8x laisvai programuojami įrankio apsaugos įtaisai 8x laisvai programuojami elektroniniai kumšteliai Konvejerio valdiklis Skirstymo dėžė 400V/230V LED darbo zonos apšvietimas Juostos padavimo įrenginio sąsaja Mechaninės stalo volelių juostos

Sąlyga: naudotas, Gamybos metai: 1994, Pressing force 250 t Column gap 1650 / 1400 mm Fixed stroke 150 mm Nljdjvuucwspfx Abmoh Stroke rate 30 - 75 strokes/min Shut height (stroke + ram adjustment at top) 665 mm Lateral opening between uprights 550 mm Table area 1600 x 900 mm Through-hole in table 1000 x 300 mm Table height above floor 980 mm Ram area 1400 x 900 mm Drive power 42.0 kW Machine weight approx. 33.00 t Space requirement approx. 2.8 x 2.5 x 4.4 m Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight compensation, FIXED stroke, motorized ram adjustment motorized central lubrication Electronic roll feed (Normatic, AESL 500-2.8) with motor (Indramat), motorized adjustable strip side guides, motorized height adjustment Tool changer system Distance table - ram without tool changer system approx. 765 mm Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system

Sąlyga: naudotas, Gamybos metai: 1996, Pressure: 130 t Distance between uprights: 1220/1070 mm Stroke: 22 - 96 mm Strokes per minute: 20 - 120 spm Installation height (stroke + upper ram adjustment): 518 mm Lateral opening between uprights: 600 mm Table area: 1220 x 880 mm Through-hole in table: 450 x 250 mm Table height above floor: 950 mm Ram area: 1180 x 800 mm Drive power: 22.0 kW Machine weight: approx. 17.50 t Space requirements: approx. 3.7 x 1.75 x 3.55 m Ram adjustment: 110 mm Approved for automatic operation in accordance with German accident prevention regulations (UVV) Nlodpjvuubyefx Abmoh Equipped with infinitely variable drive control, hydraulic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, automatic stroke adjustment, 8-fold roller guide, electronic roller feed with hydraulic intermediate ventilation (Hensel, EVX 500)

Sąlyga: naudotas, Gamybos metai: 2004, Pressure: 80 t Stroke: 16 - 63 mm Stroke rate: 100 - 750 strokes/min Column gap: 970 mm Installation height (stroke + ram adjustment at top): 380 mm Lateral column opening: 380 mm Table dimensions: 940 x 910 mm Pass-through opening in the table: 770 x 190 mm Table height above floor: 1180 mm Ram surface: 940 x 510 mm Ram adjustment: 76 mm Material width: 203 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 37.0 kW Weight: 14.50 t Nedpfsvuua Nox Abmelh Space requirement: approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation according to CE standards With infinitely variable three-phase drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil circulation lubrication Mechanical roller feed Bruderer BBV 205/120, driven via press main shaft/universal shaft Guethle CK cantilever brackets Optionally, a soundproof enclosure can be offered – price on request.

Sąlyga: naudotas, Gamybos metai: 1998, Pressure: 160 t Stroke: 30 - 90 mm Strokes per minute: 50 - 300 /min Frame gap: 1270 mm Installation height (stroke + upper ram adjustment): 590 mm Lateral frame passage: 440 mm Table surface: 1250 x 900 mm Passage opening in table: 950 x 300 mm Ram surface: 1250 x 800 mm Ram adjustment: 100 mm Material width: 200 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 64.5 kW Weight: 21.00 t Space requirement: approx. 3.0 x 2.2 x 3.9 m (LxWxH) Approved for automatic operation according to CE standard with infinitely variable DC drive, hydraulic clutch/brake combination (manufacturer: Desch), automatic stroke adjustment, motorized ram adjustment, fixed table, oil circulation lubrication Nlsdsvut Uxepfx Abmoh mechanical roller feed Bruderer BBV 205/120 driven via the main shaft/universal joint shaft of the press Bracket consoles Guethle CK 01/0800

Sąlyga: naudotas, Gamybos metai: 1978, Pressure 150 t Fixed stroke 80 mm Stroke rate 30 - 150 /min Upright gap width 930 mm Shut height (stroke + ram adjustment at top) 400 mm Side frame opening 650 mm Table area 880x1300 / 1500x600 mm Pass-through opening in table 760 x 180 mm Table height above floor 1270 mm Ram area 920x1000 / 1300x600 mm Nodpfovut Urox Abmjlh Weight 27.5 t Space requirements approx. 3.1 x 1.8 x 4.3 m Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, fixed stroke, motorized ram adjustment, pneumatic ram counterbalance, central lubrication WITHOUT feed as is, without commissioning Price for commissioning (with new control system) on request

Sąlyga: naudotas, Gamybos metai: 1988, Pressure: 200 t Stroke: 30 - 160 mm Nljdevut S Depfx Abmsh Strokes per minute: 40 - 120 Column gap: 1500 / 1300 mm Installation height (stroke + ram adjustment at top): 860 mm Side column clearance: 600 x 530 mm Table area: 1250 x 1250 mm Through-hole in table: 550 x 300 mm Table height above floor: 1000 mm Ram area: 1250 x 1000 mm Ram adjustment: 125 mm Material width: 30 - 500 mm Material thickness: 0.5 - 3.0 mm Feed length: 0 - 999.9 mm Drive power: 50.0 kW Weight: 34.00 t Space requirement approx. 4.0 x 1.7 x 5.2 m (LxWxH) Approved for automatic operation in compliance with German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic ram overload protection, pneumatic ram counterbalance, motorized ram adjustment, automatic stroke adjustment

Sąlyga: naudotas, Gamybos metai: 1983, Press force 160 t Fixed stroke 160 mm Stroke rate 30 - 120 /min Upright width 1190 mm Shut height (stroke + ram adjustment at top) 735 mm Lateral upright clearance 600 mm Table area 1200 x 1000 mm Pass-through opening in table 500 x 300 mm Table height above floor 900 mm Ram area 1000 x 800 mm Ram adjustment 125 mm Material width 550 mm Material thickness 0 - 6.0 mm Material cross-section 1100 mm² Feed length 350 mm Drive power 45.0 kW Weight 25.0 t Space requirement approx. 2.3 x 2.1 x 4.7 m (LxWxH) Approved for automatic operation according to German accident prevention regulations (UVV) Nedjvuk E Uepfx Abmelh with infinitely variable drive (PIV), hydraulic overload protection in ram, motorized ram adjustment, pneumatic ram counterbalance, ram locking, central lubrication, mechanical gripper feed (Haulick, RS 350/550 SL 90) as is, where is, WITHOUT commissioning

Sąlyga: naudotas, Gamybos metai: 1986, Pressure 160 t Stroke 20 - 120 mm Strokes per minute 20 - 120 Nljdpfx Abevut Rtemoh Upright width 1300 mm Side clearance between uprights 520 mm Shut height 570 mm Table area 1250 x 900 mm Pass-through opening in table 900 x 250 mm Table height above floor 1000 mm Ram area 1100 x 700 mm Ram adjustment 100 mm Material width 20 - 320 mm Material thickness 0.3 - 4.0 mm Feed length 1.0 - 9999.99 mm Drive power 18.5 kW Machine weight approx. 25.0 t Space requirement approx. 3.0 x 2.3 x 3.7 m (L x W x H) Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, electro-hydraulic overload protection, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, motorized central recirculating lubrication Electronic roll feed Kaiser KWV 320 Z, year 2000, with hydraulic intermediate air-release.

Sąlyga: naudotas, Gamybos metai: 1996, Pressure: 63 t Column gap: 965 mm Stroke: 4 - 60 mm Strokes per minute: 30 - 800 Installation height (stroke + slide adjustment at top): 380 mm Lateral column passage: 355 mm Table area: 960 x 640 mm Through-hole in table: 850 x 140 mm Table height above floor: 1,150 mm Ram area: 960 x 460 mm Drive power: 32.5 kW Nlsdpfx Ajvut Rgjbmeh Machine weight approx. 13.00 t Space requirement approx. 3.3 x 1.7 x 2.9 m Ram adjustment: 80 mm Approved for automatic operation according to CE standards With infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motorized ram adjustment, mechanical gripper feed type GF 160 Can be offered either as-is or installed and in operation

Sąlyga: naudotas, Gamybos metai: 1993, Pressure: 63 t Stroke: 10 - 80 mm Stroke rate: 75 - 400 /min Frame gap: 1080 / 920 mm Installation height (stroke + ram adjustment at top): 450 mm Lateral frame opening: 300 mm Table surface: 1000 x 550 mm Pass-through opening in table: 700 x 160 mm Table height above floor: 1080 mm Ram surface: 900 x 450 mm Ram adjustment: 80 mm Nledpfjvut Ixox Abmoh Material width: 250 mm Material thickness: 0.3 - 3.0 mm Material cross-section: 750 mm² Feed length: 1.0 – 9999.9 mm Drive power: 11.0 kW Weight: 9.5 t Space requirements: approx. 2.8 x 2.7 x 3.1 m (LxWxH) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (manufacturer: Ortlinghaus), manual stroke adjustment, motorized ram adjustment, motorized oil circulation lubrication, pneumatic ram weight compensation Servo roll feeder Kaiser KWV 250

Sąlyga: naudotas, Gamybos metai: 1990, Pressure: 50 t Column gap: 800 mm Stroke: 4 - 60 mm Strokes per minute: 30 - 300 spm Installation height (stroke + upper slide adjustment): 400 mm Side opening between columns: 350 mm Nedpfx Ajvut Huobmjlh Table surface: 780 x 640 mm Through-hole in table: 690 x 140 mm Table height above floor: 1150 mm Slide surface: 800 x 460 mm Drive power: 26.0 kW Machine weight approx. 9.00 t Space requirements approx. 2.4 x 1.7 x 2.9 m Slide adjustment: 80 mm Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, automatic stroke adjustment, electronic roll feed (PBK, WV 65-DSM 300P, year 2007) Can be offered in current condition, either with or without commissioning – video available from seller prior to dismantling.

Sąlyga: naudotas, Gamybos metai: 1982, Pressure 30 t Stroke 8 – 40 mm Strokes per minute 100 – 600 Nljdpfx Abevuk Hrjmjh Upright width 330 mm Shut height (stroke + ram adjustment at top) 280 mm Side clearance between uprights 300 mm Table area 540 x 470 mm Die opening in table 315 x 110 mm Table height above floor 1000 mm Ram area 250 mm Material width 120 mm Material thickness up to 3.0 mm Feed length up to 60 mm Drive power 5.5 kW Weight 2.6 t Space requirement approx. 1.5 x 1.2 x 2.2 m (L x W x H) Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manual ram adjustment, fixed table, mechanical roller feed (Bruderer BBV 120/60) Table area 540 x 300 mm or 330 x 390 mm As is, ex location, WITHOUT commissioning.

Sąlyga: naujas, Gamybos metai: 2025, Slėgis: 315 t Atstumas tarp stovų: 2800 mm Fiksuotas eiga: 35 mm Eigos skaičius: 100–250 eigų/min Montavimo aukštis (eiga + viršutinio stūmoklio reguliavimas): 560 mm Šoninis praėjimas tarp stovų: 600 mm Nsdoxcp Itepfx Abmolh Stalviršio plotas: 2700 x 1200 mm Prapjova stalo plokštėje: 2450 x 450 mm Stūmoklio paviršius: 2700 x 800 mm Svoris: 80,0 t Reikalingas plotas (PxGxA): 5,1 x 2,65 x 5,25 m

Sąlyga: naujas, Gamybos metai: 2025, Slėgis: 315 t Kolonų atstumas: 3800 mm Fiksuotas eiga: 35 mm Eigos dažnis: 100 - 250 eigos/min Įrengimo aukštis (eiga + stūmoklio viršutinė reguliacija): 560 mm Šoninis perėjimas tarp kolonų: 600 mm Stalo matmenys: 3700 x 1200 mm Pereinamasis atidarymas stale: 3400 x 450 mm Nljdsxcp Imopfx Abmoh Stūmoklio paviršius: 3700 x 800 mm Svoris: 110,0 t Reikalinga vieta (IxPxA): 6,1 x 2,65 x 5,6 m

Sąlyga: naudotas, Gamybos metai: 1990, Pressure: 32 t Gap width: 680 / 550 mm Stroke: 8 - 50 mm Strokes per minute: 85 - 500 spm Die height (stroke + ram adjustment at the top): 300 mm Nodpjvuuf Sofx Abmelh Side opening (gap): 250 mm Table size: 620 x 450 mm Throughhole in table: 450 x 110 mm Table height above floor: 915 mm Ram area: 560 x 350 mm Drive power: 7.5 kW Machine weight approx.: 5.60 t Space requirements approx.: 3.6 x 1.65 x 2.8 m Ram adjustment: 50 mm Approved for automatic operation in accordance with German accident prevention regulations (UVV) Equipped with: infinitely variable drive, pneumatic clutch, pneumatic ram counterbalance, mechanical gripper feed (ZR 18 D) Can be offered as-is, either without commissioning or with commissioning if required.

Sąlyga: naudotas, Gamybos metai: 1976, Pressure: 200 t Clearance between uprights: 1550 mm Stroke: 30 - 160 mm Strokes per minute: 30 - 90 spm Shut height (stroke + ram adjustment up): 745 mm Side frame opening: 800 mm Table surface: 1500 x 1150 mm Pass-through opening in table: 450 mm Table height above floor: 810 mm Ram surface: 1500 x 1000 mm Drive power: 38.0 kW Nljdpfx Abjvuubajmjh Machine weight approx. 26.5 t Required space approx. 5.1 x 1.6 x 3.7 m Ram adjustment: 110 mm Approved for automatic operation in compliance with German accident prevention regulations (UVV). Equipped with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight compensation, and motorized ram adjustment. Can be offered without commissioning, or alternatively, with a new Siemens S7-1500 F control.