Pamačiau Visiškai Automatiškai pirkti naudotą (3 454)

Sąlyga: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangle 1250 x 600 mm Cutting capacity at 45 degrees: round 680 mm Cutting capacity at 45 degrees: square 600 mm Cutting capacity at 45 degrees: flat 870 x 600 mm Cutting capacity at 60 degrees: round 580/550 mm Cutting capacity at 60 degrees: square 530/450 mm Cutting capacity at 60 degrees: flat 550 x 450 mm Saw blade length: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 5.3 t Required floor space approx. 5.75 x 4.2 x 2.75 m 2-column double mitre band saw for fast cutting equipped with pusher system P15; option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to -60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Highest positioning accuracy is achieved with the new B&S Positioning System. An intelligent NC control ensures smooth interplay of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake via large-diameter central positioning. The work table is mounted on high-quality preloaded bearings, which ensure smooth and easy rotation. CNC control A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning system, is equipped with ‘dual-side opening gripper tongs’ which are hydraulically controlled. This Bdsdpfx Adofg E Hnjmek guarantees secure gripping and transportation of materials and bundles that deviate slightly from the ideal form. The pusher system is set up separately and is guided by ball-bearing linear guides, a precision-ground rack, and a frequency-controlled, robust geared motor.

Sąlyga: naujas, Gamybos metai: 2025, juostinio pjūklo ilgas: 4 420 mm, pjūklo juostos plotis: 34 mm, Double-column Fully Automatic Bandsaw Everising H-360 HB Cutting range round: 0 - 360mm Cutting range square: 360 x 360mm Bundle clamping width: 180 – 280mm Bundle clamping height: 50 – 160mm Drive power: 3.7 kW Saw blade dimensions: 4420 x 34 x 1.1mm Weight: 2,310 kg Machine dimensions: 2,500 x 2,200mm Standard equipment of the machine includes: • Rigid steel construction in double-column design • NC feed system • Infinitely variable cutting speed control (frequency inverter controlled) • Digital cutting speed display • Hydraulically operated double horizontal vices • Hydraulic saw blade tensioning • Carbide saw blade guides (including back guide) • Hydraulically preloaded blade guides • Precision PLC (SPS) control for all hydraulic and electrical components • Cut counter with automatic shut-off • Automatic out-of-stock shut-off • Multi-job function • Bundle clamping device • Powered chip brush • Automatic blade breakage control with emergency stop • Chip flushing gun • Flexible work light • 2 meter roller conveyor • Toolbox • Carbide function Special equipment included: • Variable clamping pressure reduction • Cut line monitoring Bedpfx Aeq St U Nsdmjdk Comprehensive complete German documentation included.

Sąlyga: paruoštas naudoti (naudotas), With wrapping arm and control cabinet. Bdjdpfx Adjh D H Hvjmjk

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Fully automatic coffee machine Gaggia La Solare 2ES3RM, year of manufacture 2024, cleaning required, Serial No. 25021334, Dimensions (LxWxH): 368x586x783 mm, Weight: 47 kg, Bean hopper capacity: 1,200g each, Instant container capacity: 1.5L each, Up to 250 cups per day, Fully automatic fresh milk or milk powder system (model-dependent), Robust ceramic grinder & two bean hoppers, Large touchscreen with intuitive operation, Bdedpfxewt R Hue Admek

Gamybos metai: 1998, Sąlyga: labai geros būklės (naudotas), Kap Saw Reinchardt NC 700 Automatic Manufacturer: Reinchardt Model / Type: NC 700 Year of Manufacture: 1998 Category: Crosscut Saw Location: Gorzów Wlkp. Delivery Terms: Collection by Buyer Delivery Costs: Covered by the Customer Commissioning: To be agreed Description: CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1 MM, NEW CONTROLLER, SAW BLADE OPERATED BY HYDRAULICS Comments: Bdodpsd H Hmhofx Admek

Sąlyga: naujas, Gamybos metai: 2025, L-version of the vertically operating L-sealer for shrink packaging. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed). – Specifications: maximum machine cycle rate in idle mode: 35 cycles/minute. The sealing unit operates in an extremely stable vertical position thanks to its 4-column design, applying very consistent pressure to the shrink film. Excellent sealing results with minimal wrinkling. Height and pressure of the sealing frame can be adjusted. Easily adjustable perforation module. Optional: Feed systems for CDs, DVDs, etc. – Specifications: Packaging sizes: (L + H) max. 600mm with H < 180mm and (W + H) max. 500mm with H < 180mm; length of sealing blades: longitudinal side = 703mm, transverse side = 550mm; power supply: 220V/3.2kW; machine dimensions and weight: L2015 x W1470 x H1300mm, 850kg. Bodpfx Adjv Nl Awjmsdk Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built equipment, we also offer very short delivery times starting from approximately 3 weeks. – All machines are supplied with full warranty.

Sąlyga: naujas, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Bdedpfxofb Nbfj Admsk Machine weight approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL PROMOTION PRICE!!!! 2-Column Heavy-Duty Bandsaw Machines of the SBS Series The SBS series stands out with advanced engineering, high quality, durability, and an unrivaled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Driven chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vise (before and after the blade) • Creep speed for positioning • Bundle clamping prepared for electric and hydraulic systems • Chip conveyor The SNC 20 control allows easy and straightforward input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the material allowance and the number of feed cycles. In addition, the error code display system enables fast analysis for troubleshooting.

Gamybos metai: 2006, Sąlyga: labai geros būklės (naudotas), Sierra Ingleteadora con taladrado BALESTRIERI TECHNA PLUS 3001 Fabricante: BALESTRIERI Modelo / tipo de máquina: TECHNA PLUS 3001 Año de fabricación: 2006 Categoría de máquina: Sierra/Incaizadora Cabezal de corte móvil con accionamiento de posicionamiento a través de unidades de movimiento y visualización digital electrónica. Los deslizadores constan de guías templadas y cremalleras de bolas recirculantes. • 2 unidades con disco de Ø 400 mm – cada unidad accionada por motor de 3 kW • Capacidad (sistema radial) de la unidad deslizante de rodillos • 2 mesas de apoyo de componentes, equipadas con pinzas neumáticas verticales • 1 soporte de mesa indirecto • Lectura mediante visualizador digital electrónico • 2 unidades de taladrado desde el cabezal, cada una con 5 husillos de 32 mm – motores de 1,5 kW (5500 rpm); deslizaderas para la unidad deslizante de rodillos • Lector mecánico para correcciones verticales y horizontales; cabezales de taladrado orientables horizontal o verticalmente • Inicio de ciclo mediante pulsadores a dos manos (según normativa de seguridad) y controles a pedal neumático • Evacuación automática de residuos • Altura máxima de corte: 145 mm • Ancho máximo de corte: 300 mm • Longitud mínima de corte: 170 mm (con carga/descarga automática: 355 mm) • Longitud máxima de corte: 3100 mm • Ancho de corte: 300,0 mm • Altura de corte: 145,0 mm • Potencia del motor: 1,5 kW ----- Dimensiones (Largo x Ancho x Alto): - × - × - Bdsdpfed Ifgvsx Admok Peso: 2.300 kg Horas de funcionamiento: - Horas conectada a la red eléctrica: - Buen estado técnico Conforme a normativas CE ----- • Peso: 2.300 kg

Sąlyga: naujas, Gamybos metai: 2025, Fully automatic L-sealer for shrink packaging, PRO version. Automatic product infeed and discharge. - Specifications: 220V, 2.5kW; 6Bar / 0.1m³/min; maximum machine cycle rate (idle): 30 cycles/minute; maximum product dimensions (mm): L(100-450)xW(60-350)xH(5-120); machine dimensions (mm): L1790xW845xH1550; weight (net/gross) 350/450kg. Bdodpfxov Nl Dno Admok Please note that our prices for new machines are often lower than typical used equipment prices. Feel free to contact us and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock at any time for immediate delivery. For customer-specific machines, we also offer very short lead times starting from around 3 weeks. - All machines are supplied with a full warranty.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 310 mm Cutting capacity at 90 degrees: square 280 mm Cutting capacity at 90 degrees: rectangular 400x250 mm Saw blade dimensions: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Total power requirement: 2.2 kW Machine weight approx. 0.99 t Space requirement approx. 1.85 x 2.2 x 2.0 m Bedpfx Asd Iiprjdmedk Mitre Band Saw, Fully Automatic, GBS 310/400 VA-I CNC - Mitre left 45° automatic operation - Mitre left 60° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gearbox made from one casting, very quiet and low-vibration cutting - Removable chip tray (for cleaning) - Shockproof and ergonomic control panel with oil-resistant EPDM cover - Excellent accessibility to saw, material and feed unit - Safety cover foldable - Fine feed adjustment - Semi-automatic cutting! - CNC control for optimizing workflows Input options for different parameters such as quantity and material lengths, automatic calculation of cutting kerf - CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with multiple section lengths - Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, remnant piece length 170 mm.

Sąlyga: naujas, Gamybos metai: 2025, Automatic weighing unit for packaging granular products (chemicals, foodstuffs, sugar, coffee, detergents, etc.) into bottles, cans, or similar containers. Includes hopper, vibratory feeder, weighing unit, dust protection enclosure, deposit tray, and conveyor belt. - Specifications: 2-head weighing unit, each with a weighing range of 10-2000g; accuracy: < +/-1g (depending on product); max. machine cycle rate: 40 cycles/minute; hopper volume: 20 liters; stainless steel version (SS304); power supply: 220V, 0.5kW; machine dimensions (including conveyor): L870xW830xH2100mm; weight: 180kg. Bjdpfx Adsv Nk Nijmjdk Please note that our new prices are often below typical used equipment prices. Please feel free to contact us and let us know about your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. - All machines come with a full warranty.

Sąlyga: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 1250x600 mm Saw blade length 8140x54x1.6 mm Band speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 4.96 t Space requirement approx. 5.7 x 4.0 x 2.75 m Bdedpfx Ajfgyigodmsk 2-Column Bandsaw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid materials. Material is clamped vertically on the infeed and outfeed sides. Starting from the K-tech 800 H, the machine is equipped as standard with an additional horizontal vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines are standard equipped with the environmentally friendly “B&S Clean Cut cutting system” featuring minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control The CNC control allows programming of up to 90 cutting programs with different cut lengths, batch quantities, and mitre angles. The B&S pusher system, feed and positioning system, is equipped with "double-sided opening gripper tongs" that are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is designed as a separate unit and is guided via ball-bearing linear guides, a precision-ground rack, and a frequency-driven robust gear motor.

Sąlyga: naujas, Gamybos metai: 2025, Fully automatic powder filling system, single auger filling unit, straight can transport. Functions: automatic container feeding – precise positioning – container lifting – vibration – filling – weight feedback – sorting – container discharge. PLC control, precision servo system, dosing technology: dosing auger and feedback from load cell, removable glass cover. - Specifications: filling range: 10-1500g; accuracy: +/- 0.3-1%; suitable for metal cans, glass bottles, plastic containers, paper cups, etc.; container dimensions: diameter 40-130mm, height 80-220mm with different can-feed augers; max. machine cycle rate (idle): 60 cycles/minute; stainless steel version (SS304); power supply: 220V, 2.0kW; machine dimensions: L1850 x W1366 x H2100mm; weight: 260kg. The machine/system is also available in other versions for different packaging sizes and speeds. Please note that our new prices are often below the typical prices for used equipment. Feel free to contact us and let us know about your packaging requirements. - We typically have 30 to 50 different new machines available immediately from stock. For custom-built machines, we offer very short delivery times starting from around 3 weeks. - All machines are supplied with a full warranty. Bedpfx Aov Nk N Nsdmedk

Sąlyga: naujas, Cutting range at 90°: round 255 mm Cutting range at 90°: square 240 mm Cutting range at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Bsdpsd Iip Aefx Admedk Table height: 870 mm Band speed: 18 – 110 m/min Total connected load: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 250 Super VA-I MPS • Mitre left 45°: automatic mode • Mitre left 60°: semi-automatic mode (cuts without programming) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet and low vibration cutting • Removable chip tray (disinfection) • Excellent access to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cut! Automatic sawing with microprocessor control Selectable for 2 program levels Semi-automatic mode Fully automatic mode Start after entering the required number of pieces and length: initial material cut, cutting process, and piece counting continues until the program is completed • MPS controller for entering the required number of feed cycles • All important machine data (power consumption, cutting time, number of pieces) is displayed on the LED display during the cutting process • Entered data is stored in the RAM memory • The self-diagnostic circuit automatically displays all irregularities as error messages and monitors the complete process • Feed unit mounted on floating bearings • Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm, or repeatable via reversing automatic 1 – 29 times, remainder piece length 210 mm

Gamybos metai: 2025, Sąlyga: naujas, Powder filling and sealing system for cans, including vacuum and gassing module, laser engraver, and can turner. – Specifications: Can diameter: 99-127mm; Can height: 100-180mm; Output: max. 7 cans/minute at -90Kpa vacuum; Residual oxygen: ≤ 3%; Nitrogen pressure: 0.1-0.8Mpa; Compressed air supply: 0.6-0.8Mpa; Power: 3kW, AC220V; Machine dimensions: L1900xW800xH1800mm; Weight: 880kg. – Laser engraver specifications: Engraving depth: 0.01mm-0.4mm; Laser wavelength: 10.6μm; Minimum line width: 0.1mm; Minimum character size: 0.2mm; Repeatability: ±0.03mm. Bjdsv Nk S Repfx Admodk Please note that our new equipment prices are often below common used equipment prices. Feel free to contact us with your packaging requirements. - Typically, 30-50 different new machines are available from stock for immediate delivery. Additionally, we offer very short lead times from approx. 3 weeks for customer-specific machines. - All machines are supplied with a full warranty.

Sąlyga: naujas, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400 x 330 mm Saw band length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m Bdsdpofb Nbgsfx Admjk SPECIAL PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series impresses with sophisticated technology, high quality, durability, and an unrivaled comprehensive standard equipment package. - Modern SNC 20 controller for CNC versions - Frequency-controlled saw drive - Operating buttons with pictograms - Work light - Driven chip brush - Hydraulic band tension - Adjustable clamping pressure - Double vice (before and after the band) - Creep mode for positioning - Bundle clamping prepared for electric and hydraulic operation - Chip conveyor The SNC 20 controller allows convenient and straightforward input of up to 20 different cutting tasks (length and quantity). When the target dimension is entered, the controller automatically calculates the kerf waste and the number of feed strokes required. In addition, the error code display system offers rapid fault diagnosis for troubleshooting.

Sąlyga: naujas, Gamybos metai: 2025, Fully automatic L-sealing machine for shrink packaging. Ideal in combination with the SHRINKtunnel POF-L. Automatic product infeed and outfeed. - Specifications: 220V, 2.5kW; 5.5 bar, 0.1m³/min; maximum idle cycle rate: 30 cycles/minute; maximum product dimensions (mm): L450xW350xH130; machine dimensions (mm): L1700xW960xH1400; weight (net/gross): 290/420kg. Bdedpfev Nl Akex Admjk Please note that our new prices are often below typical used equipment prices. Simply ask us and let us know your packaging requirements. - We usually have 30–50 different new machines available from stock for immediate delivery. For machines manufactured to specific customer requirements, we offer very short lead times starting from approx. 3 weeks. - All machines are available with a full warranty.

Sąlyga: naujas, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Bdsdpfx Adjfg E Hmomok Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 – 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double mitre band saw for rapid cutting with pusher system P15. Option P30 available. Hydraulic saw frame lowering • NC controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially engineered for cutting profiles and beams. Maximum positioning accuracy is achieved by the new “B&S positioning system”. An intelligent NC control unit ensures smooth interaction between the linear encoder and the self-braking positioning motor, combined with a reliable hydraulic brake via large-radial central positioning. The work table is mounted on high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control The CNC controller enables programming of up to 90 cutting programs with varying cut lengths, quantities, and mitres. Double-sided clamping positioning system The B&S pusher system, feeding and positioning unit, is equipped with "double-sided opening gripping tongs" that are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate from the ideal shape. The pusher system is constructed separately and guided by precision ball-bearing linear guides, ground rack and pinion, and a heavy-duty, frequency-driven gear motor.

Sąlyga: naujas, Gamybos metai: 2025, Fully automatic powder filling system with dual auger filling unit and linear can transport. Functions: automatic container feed, precise positioning, container lifting, vibration, filling, weight feedback, sorting, and container discharge. PLC control, precision servo system, dosing technology: dosing auger with weighing cell feedback, removable glass safety cover included. Integrated Wi-Fi capability, remote control, and data download system. Easy cleaning; conveyor platform and recycling hopper are mobile. SIEMENS PLC, servo motor and inverter from SCHNEIDER, pneumatic components from AIRTAC, weighing sensor from HBM (Germany). Two packaging modes: high-speed or high-precision. - Specifications: Filling range: 10-5000g; Accuracy: +/- 0.3-1% (high speed mode), +/- 1-2g (high precision mode); suitable for metal cans, glass bottles, plastic containers, paper cups, etc.; container dimensions: diameter 50-200mm, height 80-270mm with various can feeding screws; maximum machine speed in idle: 120 cycles/min (high-speed mode), up to 60 cycles/min (high-precision mode); stainless steel version (SS304); Power: 220V, 4.5kW; Machine dimensions: L2813 x W1535 x H2500mm; Weight: 750kg. The machine/system is also available in various configurations for different packaging sizes and packaging speeds. Bdodpfov Nk Rajx Admsk Please note that our new pricing is often below common used equipment prices. Feel free to send us your inquiry and specify your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-made machines, we offer very short delivery times starting from about 3 weeks. - All machines come with a full warranty.

Sąlyga: naujas, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Bandsaw blade length: 5,450 x 41 x 1.3 mm Table height: 800 mm Blade speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.2 t Dimensions (L x W x H): 2,675 x 2,150 x 2,050 mm SPECIAL PRICE OFFER!!!! 2-column high-performance automatic bandsaws of the SBS series Bdodpofg E Hvofx Admok The SBS series stands out with its advanced technology, high quality, durability, and an exceptionally comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tension • Clamping pressure regulation • Double vice (before and after the blade) • Inch mode for positioning • Bundle clamping prepared for electric and hydraulic control • Swarf conveyor The SNC 20 controller allows easy and straightforward input of up to 20 different sawing jobs (length and quantity). When the desired dimension is entered, the control system automatically calculates both kerf loss and the required number of feed cycles. In addition, the error code display system provides rapid fault diagnosis for troubleshooting.

Sąlyga: naujas, Gamybos metai: 2025, Sealing of cans by seaming, max. machine cycle rate in idle mode: 40 cycles/min; sealing rotation speed: 340 revolutions/min; can dimensions: diameter: 50-160mm, height: 50-200mm; power: 1.1kW; machine dimensions: L2050×W1000×H1800mm; weight: 1100kg. The machine/system is also available in further configurations for various packaging sizes and packaging speeds. Bjdpfx Aov Nk Tusdmsdk Please note that our new prices are often lower than typical used equipment prices. Feel free to send us an inquiry and let us know about your packaging requirements. - Generally, 30-50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. - All machines are available with full warranty.

Sąlyga: naujas, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw band dimensions: 5980 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.8 t Dimensions (L x W x H): 3.0 x 2.15 x 2.2 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series stands out with its advanced technology, high quality, durability, and a uniquely extensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vice (before and after the saw band) • Creep mode for positioning • Bundle clamping electrically and hydraulically prepared Bedpfxjfg E Hwe Admedk • Chip conveyor The SNC 20 control allows simple and user-friendly input of up to 20 different sawing operations (length and quantity). When entering the target dimension, the control system automatically calculates the trim cut and number of feed strokes. Additionally, the error code display system enables quick diagnosis for troubleshooting.

Sąlyga: naujas, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Bjdpfx Adjfm T Hbomedk Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical band saw in dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard equipment includes: - Powered chip conveyor, mountable on either the right or left side of the machine. - Clamping pressure regulation of the machine vices. - Feeder with vertical rollers for lateral material support. - Sensors for material start detection. - Clamping pressure regulation. - Storage for up to 300 programs. - The machine is available with either a 34 mm or 41 mm blade at no extra cost. Price on request.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangle 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight: approx. 2.3 t Space requirements: approx. 2.65 x 2.8 x 2.2 m Bjdofu Nbbopfx Admjdk For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation Material height sensor (automatic cut-start detection) Automatic feed unit via ball screw with incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush Feed vice with double-sided opening Minimum offcut length: 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw with incremental feed and automatic length compensation, adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping units Pre-selection of 3 different material feed speeds Visualization of the entire workflow with easy data input

Sąlyga: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820 x 610 mm Saw blade length: 5850 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Bdedpjfgyifefx Admjk Space requirements: approx. 5.85 x 3.6 x 2.7 m 2-column band saw for high-speed cutting, K-tech 800H with pusher system P 15. P 30 (option). Fast, smooth and ergonomic cutting. Specially developed for cutting profiles and beams as well as solid material. Material clamping is done vertically on both the infeed and outfeed sides. Starting from the K-tech 800 H, the machine is equipped as standard with an additional horizontal clamping vice. The combined action of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly B&S Clean Cut cutting system featuring minimal quantity lubrication. This reduces cleaning requirements and conserves resources. CNC Control A CNC control unit allows programming of up to 90 cutting programs with different cut lengths, quantities, and angles. The B&S pusher system (feed and positioning system) is equipped with "double-opening hydraulic grippers," which are hydraulically operated. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal shape. The pusher system is built as a separate unit and guided by ball-bearing linear rails, precision-ground rack, and a frequency-driven, robust gear motor.