Milteliai Pistoletas pirkti naudotą (527)

Sąlyga: naujas, Gamybos metai: 2025, Oil-fired powder coating oven The oven is designed for the polymerization of powder coatings. It features the latest heat exchanger, made entirely of acid-resistant AISI 1.4301 stainless steel, offering exceptionally high efficiency. Working dimensions (mm): 1500 (W) x 4000 (D) x 2000 (H) Technical specifications: Cbauevig73 • Power supply: 400V 50Hz • Riello 90 kW burner • Operating temperature: 210 °C • Maximum temperature: 230 °C • High-quality thermal insulation 150 mm Equipment: • Overhead transport system • Convection (ensures uniform temperature throughout the oven, accelerating the heating process of parts) • Locks for safe opening and closing • Timer module • Thermoregulator (controls and maintains the internal temperature at the set level) • The oven is equipped with guide rails for easy transportation Pvxgim Itsdpfx Afjiv H Hps Isb CHOOSE BUMEX SP. Z O.O. Highest-quality machines among those available on the market Professional advice and service Warranty Warranty and post-warranty service Complete technical documentation 100% customer satisfaction All BUMEX SP. Z O.O. products are CE-certified We offer our own delivery service – prices are determined individually for each order We issue VAT invoices Short lead times! Machines can be ordered in various, customer-specific configurations and dimensions! Please contact us.

Sąlyga: naujas, Gamybos metai: 2025, Powder coating oven powered by natural gas. The oven is designed for the polymerization of powder coatings. Itedeh Igq Repfx Af Ieb It is equipped with a state-of-the-art heat exchanger made entirely of acid-resistant stainless steel AISI 1.4301, featuring a very high level of efficiency. Working dimensions (mm): 1500 (W) x 5000 (D) x 2000 (H) Technical specifications: • Power supply: 400V 50Hz • Riello 90 kW burner • Operating temperature: 210 °C • Maximum temperature: 230°C • High-quality thermal insulation: 150 mm Equipment: • Overhead conveyor • Convection (ensures even temperature distribution throughout the oven, thereby accelerating the heating process of parts) • Safety locks for secure door opening and closing • Time module • Thermoregulator (controls and maintains the internal temperature at the correct level) • For easy transport, the oven is equipped with rails Choose BUMEX Sp. z o.o. Very high-quality machines among those offered on the market. Professional advice and support. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX Sp. z o.o. products are CE-certified. We offer our own delivery service – prices are set individually for each order. We issue VAT invoices. Short delivery times! Machines available in various custom configurations and dimensions! Please contact us.

Sąlyga: naujas, Gamybos metai: 2024, TECHNICAL DATA: Working dimensions (mm): 1200 x 1500 x 1800 • Power consumption: 20 kW. EQUIPMENT: • Internal trolley, • External trolley, • Genuine convection system (uniform temperature throughout the oven), • Locks for safe opening and closing. POWDER COATING BOOTH: Working dimensions (mm): 1400 x 1400, Fan power: 1.5 kW, Fan capacity: 6,500 m³/h, Ultra-quiet operation, Automatic filter cleaning. COMPLETE KIT FOR MANUAL POWDER COATING The manual powder coating kit Inocart VT is ideal for uniform application of powders such as polyester. * Consistent and even spraying for a smooth and uniform coating result, * Well-balanced gun for comfortable operation, * TEC5 technology for high-quality coating results, * 3 factory presets for quick setup, * 99 user-defined settings, * Inobox height adjustment for convenient controller positioning, * Powerful cascade, ensuring thorough powder wrap around intricate details, * High transfer efficiency, minimizing coating time, * Advanced HV control for optimal coverage of hard-to-reach areas, * Adjustable powder flow rate, Itedpfx Aohd Nrajf Iob * Stepless electric vibrating table, * Self-locking hook for secure gun and pump maintenance during cleaning, * Footrest for easy transport of the Inocart unit, * Exceptional cascade durability, * Monitoring of wear parts for timely replacement. CHOOSE BUMEX SP. Z O.O. Very high quality of machines available on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Comprehensive technical documentation. 100% customer satisfaction. All products from BUMEX SP. Z O.O. are WE-certified. We offer our own transport service – prices are negotiated individually for each offer. We issue VAT invoices. Short lead times! Possibility to supply machines in various, customized configurations and dimensions.

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), Techniniai duomenys: Įrenginys skirtas T- arba H-profilio plieninių sijų, kraninių bėgių arba lakštinių tiltų išilginėms siūlėms suvirinti Maksimalus strėlės aukštis: 6 600 mm Bendras suvirinimo įrenginio ilgis: 6 700 mm Strėlės horizontalus pasiekiamumas: 5 000 mm Įrenginys važiuoja bėgiais Bėgių atstumas: 2 065 mm Povandeninio suvirinimo (UP) procesas UP suvirinimo aparatai Maitinimo šaltinis: MESSER LG800N Maitinimo šaltinių skaičius: 2 vnt. Galia: 400 amperų Pirmojo siūlės prikabinimo įrenginys Įrenginys sumontuotas ir gali būti apžiūrėtas gamyboje įjungtas. Itedsxz Hu Ijpfx Af Isb Pardavėjas neprisiima atsakomybės už rašybos ar duomenų perdavimo klaidas. Mašina pagal išvaizdą, techninę būklę ir nusidėvėjimą atitinka savo amžių; naudotos mašinos parduodamos be jokios garantijos.

Sąlyga: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, vidinis ilgis: 7 400 mm, vidinis plotis: 1 600 mm, vidinis aukštis: 2 200 mm, Miltelinio dažymo milteliais - pilna gamybos linija didelėms detalėms – įskaitant krosnį 7 400 mm, pagamintą 2018–2021 m. Pilna miltelinio dažymo linija didelių gabaritų detalėms, kurią sudaro: • KROSNIS (1): Vismont KWP-440/114 – vidus: 7 400 mm ilgio – pagaminta 2018 m. Iedpfxjxrd A Ds Af Ietb • KROSNIS (2): Libra SLET40-25-20 – pagaminta 2020 m. • MILTELIŲ KABINA: Vismont KNP-1500/06 – pagaminta 2018 m. • PLOVIMO ĮRENGINYS: Libra MR35-21-17 – pagamintas 2021 m. • Rankinis PLOVIMO ĮRENGINYS: Libra MR42 – pagamintas 2020 m. • ORO FILTRAVIMO SISTEMA: Kemper 390600 – pagaminta 2016 m. • Rankinė MILTELINIO DAŽYMO SISTEMA: Nordson Encore HD MPS – pagaminta 2021 m. • SRAIGTINIS KOMPRESORIUS: Kaeser SM 15 – pagamintas 2013 m. • PORTALINIS TRANSPORTERIS • ŠAKINIS KRAUTUVAS: Hyundai 30L-7A – pagamintas 2012 m. Visi įrenginiai veikia ir yra pilnai funkcionuojantys. Kaina: priklauso, ar perkama dalis, ar visa linija.

Gamybos metai: 2022, Sąlyga: naujas, Service – Preparation of an offer for a powder coating plant by Romer. Itsdpfx Afjfnk H Se Ieb Direct from the manufacturer romer-deutschland Manufacturer of powder coating plants and industrial ovens, plant engineering Delivery time approx. 10 to 16 weeks Shipping costs must be calculated separately.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, Išsami specifikacija: - Vidiniai matmenys: 5500 × 1500 × 2300 mm (Ilgis × Plotis × Aukštis) - Išoriniai matmenys: 5700 × 1900 × 2700 mm (Ilgis × Plotis × Aukštis) - Įėjimo durys: Dviejų varstomų durų, 1700 × 2300 mm (Plotis × Aukštis) - Sienų plokštės: 100 mm storio, 950 mm pločio, liežuvėlio-griovelio konstrukcija; 0,5 mm plieno lakštas su mineralinės vatos užpildu - Korpusas: 100 mm storio plokštės, izoliuotos mineraline vata Itsdsxna U Uspfx Af Ijb - Šildymo sistema: RIELLO dyzelinis degiklis modelis 40G20; šildymo galia 200.000 Kcal/val.; šilumokaitis iš 2 mm nerūdijančio plieno - Maksimali šiluminė galia: 200.000 Kcal/val., 1 komplektas - Stogas: 100 mm storio plokštės, izoliuotos mineraline vata - Valdymo sistema: Šildymo valdiklis, laiko nustatymas, gedimų indikacija, avarinio stabdymo jungiklis, veikimo valandų skaitiklis, temperatūros ribos reguliatorius, bendra veikimo laiko indikacija - Bendra galia: 6 kW - Viršutinė transportavimo sistema: 4 bėgiai; maksimali apkrova 400 kg kiekvienam bėgiui Gaminame krosnis pagal bet kokius matmenis. Įgyvendiname pilnus sprendimus su transportavimo traversomis, dažymo sienomis ir miltelinio dažymo pistoletais – vizualizacijos pridėtose nuotraukose.

Sąlyga: naudotas, Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 430/16, Powder Coating Line (Pass-through Oven for Powder Paint Polymerization with Conveyor System and Dual Spray Booth) Basic technical data of the oven: - Max. external dimensions (L x W x H): 9.6 m x 6.6 m x 2.5 m - Weight: approx. 9,000 kg - Max. operating temperature: 220ºC - Max. burner output (GZ50): 2 x 160 kW - Fan motor power: 24 kW - Power supply: 3 x 400 V +N +PE, 50Hz Max. part dimensions: - L = 2.0 m - H = 1.0 m - W = 0.6 m Included with the machine: Complete technical documentation and parts descriptions. The oven is integrated with an overhead conveyor system by JOKŚ. The conveyor system comprises 42 meters of track with drive system and lubrication system; control system with adjustable speed from 0.5 to 1.5 m/min. APAR AR200 speed recorder, LG iG5A series inverter, EATON MFD-AC-CP4/MFD-CP4/MFD-80 power supply/communication module (manual). Manual-mode powder coating booth; two-station, pass-through design. Coating windows on opposite sides, offset from each other. Max. coated part dimension: - L = 2.0 m - H = 1.0 m Iedpfxju Hib Nj Af Istb - W = 0.6 m A linear overhead conveyor system passes through the center of the booth. The booth features three tanks designed for powder recovery/color changes, with cartridge filter-based filtration. End tanks are equipped with sieves.

Gamybos metai: 2005, Sąlyga: labai geros būklės (naudotas),

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, veikimo valandos: 8 h, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 7 000 mm, bendras aukštis: 3 000 mm, bendras plotis: 2 600 mm, garantijos trukmė: 12 mėnesiai, 🟦 Semi-automatic Powder Coating System – Compact Container Solution Modern semi-automatic powder coating plant in container design, consisting of a spray booth, recirculation oven, and automatic conveyor system. A compact and mobile solution for coating small metal parts – ready for operation anywhere after connection to the power supply. Ideal for manufacturing companies, workshops, and service providers looking for an efficient and flexible coating system. 🔹 Technical Specifications RECIRCULATION OVEN - Usable space: 4000 x 700 x 1300 mm (L x W x H) Itjdsxlr Emopfx Af Ieb - Heating capacity: 24 kW - Motor: 2.5 kW, 1500 rpm - Centrifugal fan: 4500 m³/h - Thermal insulation: 150 mm - Maximum temperature: 250°C SPRAY BOOTH - Usable space: 2000 x 600 x 1400 mm (L x W x H) - Filter system: * Motor: 2.2 kW, centrifugal fan 12,500 m³/h * Two conical polyester filters L600 * Twist-lock filter mounting * Pneumatic filter cleaning with adjustable cycle AUTOMATIC CONVEYOR SYSTEM - Travel length: 11,500 mm - Hanger spacing: 250 mm - Number of hangers: 45 pcs - Max. speed: 4 m/min - Motor power: 0.75 kW 🔸 Features & Advantages * Compact container design – easy transport and quick commissioning * Small footprint and low energy consumption * Continuous process via automatic conveyor system * Highly efficient filtration system * Complete “plug & play” system – ready for immediate operation

Gamybos metai: 2020, Sąlyga: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Iodpfefz Dubex Af Ietb Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, Sąlyga: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Itedpfx Aefz Apqjf Iob Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Itodpfx Afjfz A Ile Ijb Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Iodpefzktzjfx Af Ietb Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, Sąlyga: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Iodpfxsfz Dt Nj Af Ijtb Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, Sąlyga: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Iedpfxefz I D Do Af Istb Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, Sąlyga: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Itsdpfxefz I Edo Af Isb Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Itjdpofz I Ehefx Af Iob Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, Sąlyga: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. Itjdpfxoflmdwj Af Iob By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, Sąlyga: naujas, 7-inch touchscreen panel Iodpsfzkrnsfx Af Ijtb The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Iedefz A Iwepfx Af Ietb Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin controls are intuitive and offered in three operation modes: automatic (temporary), automatic (via plug-in filter module), or manual. Filter Module Sensor The cabins are fitted with a sensor that collects filters for cleaning once they are clogged. The system also notifies you when filters have reached their usage limit. Automatic Filter Cleaning The electronic filter cleaning system manages both the cleaning intervals and the ignition timing. Each filter is cleaned individually; filters can also be manually cleaned using a press. From experience, we know that requesting operators to clean filters manually can be challenging. With this system, operators no longer need to interrupt their workflow for filter maintenance. Low Noise Level Aluminum fans operate at a very quiet noise level of just 74–79 dB. Even with the standard cabin design, it is difficult to communicate verbally during operation. Improved Workflow Cabins equipped with suspended squirrel-cage fans enhance work efficiency, freeing up painters from the need to move fans manually. Please pre-order assemblies. Itodpsfzciqsfx Af Iob Safety Design The remaining cabin elements are designed to prevent the rise of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, Sąlyga: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Itsdpfefz Nb Tex Af Iob Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, Sąlyga: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Itodpfxefz U Tie Af Ijb Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Sąlyga: naujas, Gamybos metai: 2025, TPO0909E Powder Coating Oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Bar for hanging parts * Convection (uniform temperature throughout the oven) * Safety locks for secure opening and closing * Maximum operating temperature: 230 °C. TQ0906 Powder Coating Booth Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: Itsdpfefgnytjx Af Ijb * Power consumption: 1.6 kW * Air capacity: 3200 m³/h * Hermetically sealed lamp: 1 pc * Automatic filter cleaning system * The booth is equipped with a set of pneumatic quick couplings * Cartridge filter: 1 pc * Powder collection container Oven and booth in stock, ready for dispatch. CHOOSE BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products from BUMEX SP. Z O.O. have a WE certificate. We offer our own transport – prices are negotiated individually for each order. We issue VAT invoices. Short lead times! Option to order machines in various customised configurations and dimensions. Please do not hesitate to contact us.