Mep Italien pirkti naudotą (115)

Sąlyga: naujas, MEP SHARK 281 CCS Metal Band Saw with Semi-Automatic Descent. Item number: SH281CCS Motor Power: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 375 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 230x230 / 280x200 mm Cutting Capacity at 45° right: 190 / 180x180 / 180x180 mm Cutting Capacity at 45° left: — Cutting Capacity at 60° right: — Cutting Capacity at 60° left: — Description: - Saw bow, vice assembly, and base made of high-strength cast iron - Precision angle marking on the cast iron frame - Electrical system (with fully identifiable wiring and 24 V low voltage system) - IP 55 switch lever for manual cycles (if equipped) - Rotating chip brush for the saw blade - Rapid-approach closing device with quick-action vice - Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left - Bi-metal saw band 2950 x 27 x 0.9 mm - Includes service tools, operating manuals, and spare parts ordering instructions in the user’s language - SHARK 281 available with manual function; SHARK 281 CCS with manual mode and automatic descent by gravity - CCS (Cut Control System) with: (A) Selector switch for manual and automatic cutting, (B) Adjustable cutting speed, (C) Hydraulic brake with reservoir, (D) End stop for blade stopping; also retrofittable to existing machines - Quick-release vice adjustment - Hydraulic sensor for blade tension display - Electric coolant pump for blade cooling and lubrication, with accessible coolant tray above the base - Pneumatic vice versions (MA): vice opens and closes via manual valve (optional pedal control available) MEP SHARK 281 SXI evo [Semi-Automatic] Item number: SH281SXI Ijdpfecgbp Ijx Af Ijtb Motor Power: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 435 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 230x230 / 280x200 mm Cutting Capacity at 45° right: 190 / 180x180 / 180x180 mm Cutting Capacity at 45° left: — Cutting Capacity at 60° right: — Cutting Capacity at 60° left: — Description Semi-automatic operation: The vice closes and the motor starts, the saw head lowers for the cut, the motor stops, the saw head rises, and the vice opens. Key Features: - New centralized control console on an articulated arm - Latest-generation hydraulic control unit: highly efficient and energy-saving - Base with extendable coolant tray The machine is fully compliant with all CE standards! For additional technical details, please refer to the attached PDF document.

Sąlyga: naujas, Motor power: 1.1/2.2 kW Vise opening: 130 mm Blade dimensions: 350x32x2.5 mm Weight: 220 kg Speed: 30/60 rpm Cutting capacity at 0°: 115 / 100 / 130x80 mm Cutting capacity at 45° right: 100 / 85 / 90x80 mm Cutting capacity at 45° left: 75 / 75 / 90x65 mm Cutting capacity at 60° right: Cutting capacity at 60° left: Description: Manual crosscut saw for mitre cuts from 45° right to 45° left, featuring high cutting performance. Robust cast iron construction, practical and safe for every cut. The FALCON 352 is available as a workbench version or on a stand (accessory). The machine is equipped with a two-speed three-phase motor. Upon request, the machine is supplied with a pneumatic vice (FALCON 352 MA; when the head is lowered, the vice closes automatically). This version is always delivered with a stand. Standard features: - Externally adjustable clutch - Locking mechanism with vice Itodpfx Aocgrkysf Iob - Slidable on prismatic guide with adjustable strip - Fixed vice jaws with axial adjustment for clamping the workpiece close to the cutting line - Adjustable steel swarf remover - 48 V electric coolant pump for blade cooling and lubrication - Double return spring for securing the loading table - Machine can be lifted - Worm shaft mounted on bearing pair - Saw blade shaft mounted on offset stamp - 2 speeds: 30 and 60 rpm - Vice opening: 130 mm - Machine supplied without saw blade Electrical equipment: - Electrical control panel - Marked cable connections - Main safety switch lockable with padlock - Emergency stop device - Phase failure protection - Speed selector switch - Thermal magnetic protection - Undervoltage release - Motor with protection class IP 54 - Low-voltage control unit 24 V - Electric coolant pump 48 V - Motor 1.1/2.2 kW – 400 Volt For further technical data, please refer to the attached PDF document.

Sąlyga: naujas, MEP TIGER 372 CNC LR 4.0 Item number: TI372CNCLR Motor power: 4.0 kW Itodpfx Afechkyrj Ijb Vise opening: 190 mm Blade dimensions: 370x32x3 Weight: 1,060 kg Cutting speed: 15-150 rpm Cutting capacity at 0°: 120 / 110 / 180x100 mm Cutting capacity at 45° right: 115 / 100 / 120x100 mm Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description Electromechanical automatic vertical circular saw with semi-automatic function for use with HSS saw blades, designed for precision cuts from 45° right to 60° left. Equipped with multi-microprocessors and dual-axis control, allowing programming of up to 80 different cutting programs, each with individual cut length and quantity, for the same material cross section. Standard equipment: - Saw head slides on linear recirculating ball double-guides - Saw head feed with electromechanical cylinder - Rotary axis with thrust bearing - Three-stage gearbox - Material feed (length 1000 mm) via ball screw with stepper motor and mobile feeding vise - Vise opening 190 mm - Saw head stroke programmable directly from the control panel, for adjustment to workpiece height - Pneumatic vertical vise - HSS DMO 5 saw blade Ø 370x32x3 for solid and profile material - Swarf removal brush - Machine designed for pallet truck transport, including tool kit and operator’s manual Electrical equipment: - Control panel - Up to 80 different cutting programs storable - Operation readiness indicator light - Main safety switch - Console for programming and control, LCD display with automatic diagnostics - LED check display panel for machine function monitoring - Emergency stop button - Speed selector switch - Thermomagnetic protection - Undervoltage release - IP 55 protected control handle - 24V low voltage system - Electric coolant device for saw blade lubrication and cooling (option for micro-mist system) - Motor 4.0 kW - 400 V --- MEP TIGER 372 CNC LR 4.0 RC with Automatic Mitre Item number: TI372CNC LR 4.0 RC Motor power: 4.0 kW Vise opening: 190 mm Blade dimensions: 370x32x3 Weight: 1,060 kg Cutting speed: 15-150 rpm Cutting capacity at 0°: 120 / 110 / 180x100 mm Cutting capacity at 45° right: 115 / 100 / 120x100 mm Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description Automatic electromechanical vertical circular saw for use with HSS saw blades, for series cutting with automatic mitre adjustment from -45° to +45° on steel. In semi-automatic cycle, mitre cuts can be made between -45° and +60°. Equipped with multi-microprocessors and dual-axis control, allowing programming of up to 80 different cutting programs, each with individual cut length and quantity, for the same material cross section. Standard equipment: - Saw head slides on linear recirculating ball double-guides - Saw head feed with electromechanical cylinder - Rotary axis with thrust bearing - Three-stage gearbox - Material feed (length 1000 mm) via ball screw with stepper motor and mobile feeding vise - Vise opening 190 mm - Saw head stroke programmable directly from the control panel, for adjustment to workpiece height - Pneumatic vertical vise - HSS DMO 5 saw blade Ø 370x32x3 for solid and profile material - Swarf removal brush Electrical equipment: - Control panel - Up to 80 different cutting programs storable - Operation ready indicator - Main safety switch - Console for programming and control, LCD display with autodiagnostics - LED indicator panel for machine function monitoring

Sąlyga: naujas, MEP SHARK 350 NC HS 5.0 Fully Automatic Twin-Column Metal Band Saw Article Number: MEP SHARK 350 NC HS 5.0 Motor Power: 4.0 kW Vise Opening: 355 mm Blade Dimensions: 4640x34x1.1 mm Itsdpfx Aji Hmcdjf Ieb Weight: 2,800 kg Cutting Speed: 15 - 115 m/min, infinitely variable Cutting Capacity 0°: 350 / 350x350 mm Cutting Capacity 45° right: Cutting Capacity 45° left: Cutting Capacity 60° right: Cutting Capacity 60° left: Description: Automatic hydraulic band saw featuring a twin-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Numerically controlled bandsaw, also capable of semi-automatic operation, equipped with the new MEP 50 control system, specifically developed by MEP for automatic machines, based on Windows-2 "CE". Standard features include: Powered swarf conveyor, can be installed on either the right or left side of the machine. Vise pressure regulation for the clamping jaws. Material feeder with vertical rollers for side support. Clamping pressure regulation. Storage capacity for 100 programs. The machine can be supplied with either a 34 mm or 41 mm band at no additional cost.

Sąlyga: naujas, MEP SHARK 282 SXI evo [Semi-Automatic] All MEP models available on request! Motor power: 1.5 / 1.8 kW Jaw opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36 / 72 m/min Cutting capacity at 0°: 250 / 220x220 / 280x220 mm Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm Cutting capacity at 60° left: Description The SHARK 282 SXI EVO is an electro-hydraulic, semi-automatic bandsaw with both semi-automatic dynamic and manual modes, equipped with MEP-28 control for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - The vice closes and the motor starts – Saw head descends for cutting – Motor switches off – Saw head returns – Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button). Key features: • New centralized control console on a pivoting arm, allowing operator access from any working position • Low-voltage control panel: – Polyester membrane keypad with thermoformed raised buttons and actuation control signal – Display shows: * Diagnostics (messages in user’s language) * Alarms (causes description) * Status of inputs and outputs * Cut counter * Time used for each cut * Saw blade motor current draw * Saw blade tension * Saw blade speed * Numeric display of saw head position – Manual 24V operation switch, IP55-rated • Complete program for all special cutting cycles • Identification of additional special cutting cycles for unique applications • New generation hydraulic control system: powerful and energy-efficient • Large working surface with turntable on roller bearings, 265 mm diameter with preloaded thrust bearings • Dual blade speeds (36/72 m/min) with control • Prepared for optional electronic inverter for stepless blade speed regulation from 20 to 90 m/min • Saw bow stroke programmable directly from the control panel, allowing adaptation to the workpiece height • Movable clamping device to the left and right, with quick-release vice • Manual blade tensioning control with electronic readout on display • Base frame with pull-out coolant tray • Electric coolant pump for blade cooling and lubrication • Prepared for installation of minimum quantity lubrication system for the saw blade (optional), as well as standard emulsion oil lubricating system • Chip removal brush • Designed for forklift transport • Length stop for repeat cuts • Material support arm with roller for mounting a loading table Isdpfxjcgbq Ie Af Ietb • Bi-metal saw blade for solid and profile materials • Tool kit and operating instructions in the user’s language For further technical data, please refer to the attached PDF document.

Sąlyga: naujas, MEP Bandsaw SHARK 331-1 NC 5.0 Spider All MEP models available on request! Itedochhdispfx Af Ieb Motor power: 2.2 kW Vice opening: 340 mm Blade dimensions: 3650x27x0.9 mm Weight: 1,240 kg Cutting speed: 15 – 100 m/min, stepless Cutting capacity at 0°: 280 / 260x260 / 330x260 mm Cutting capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting capacity at 45° left: — Cutting capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting capacity at 60° left: — Description - Fully automatic hydraulic bandsaw - Mitre cuts up to 60° to the left possible - Blade length: 3650x27x0.9 mm - Single stroke: 600 mm (programmable up to 10 m) - Intuitive touchscreen control - Saw arm made of spheroidal cast iron – robust and stable - Required floor space: 3.4 m² - Dimensions: 1,900 mm width x 1,800 mm depth For further technical data, please refer to the attached PDF document.

Sąlyga: naujas, MEP COBRA 352 MA Article Number: CB352MA Motor Power: 2.2 kW Table Opening: 180 mm Blade Dimensions: 350x32x3.4 Weight: 210 kg Speed: 1700/3400 rpm Cutting Capacity at 0°: 120 / 105 / 180x70 mm Cutting Capacity at 45° right: 120 / 100 / 135x60 mm Cutting Capacity at 45° left: Cutting Capacity at 60° right: Cutting Capacity at 60° left: Description Manual circular saw for cutting aluminum, with miter cuts from 45° right to 45° left and the saw head tilting from 0° to 45° to the left. On the Cobra 352 MA (automatic vice), the vices close automatically when the saw head is lowered. Standard Equipment: - Roller-bearing mounted turntable for quick and precise miter adjustment - Clamping system for locking the saw head in any position - Automatic blade lubrication - Clamping system consisting of two vices - Saw head lock in the upper position - Adjustable length stop for repeat cuts of the same length - Vice opening 180 mm - Includes tools and user manual Electrical Equipment: - Control panel - Labeled cable connections - Operation-ready indicator light - Main safety switch - Emergency stop button - Speed selector switch - Thermal-magnetic protection Itodpfechku Ssx Af Ieb - Undervoltage release - Trigger handle protection type IP 55 - Low voltage circuit 24 Volt - Motor 1.5/2.2 kW – 400 Volt For further technical details, please refer to the attached PDF document.

Sąlyga: naujas, MEP COBRA 352 NC 5.0 [Fully Automatic] Article number: CB352NC 5.0 Motor power: 2.6/3.5 kW Vice opening: 180 mm Blade dimensions: 350x32x3.4 Weight: 600 kg Speed: 1700/3400 rpm Cutting area 0°: 120 / 105 / 180x70 Cutting area 45° right: 120 / 100 / 135x60 Cutting area 45° left: Cutting area 60° right: Cutting area 60° left: Description Automatic mitre saw with semi-automatic function for the cutting of aluminum and light metal alloys. Mitre cuts from 45° right to 45° left, with the saw head swiveling 0°-45° to the left. Control is managed via multi-microprocessors, with two NC-controlled axes enabling programming of up to 1,000 different cutting programs per material, each with different quantities and lengths. -New centralized control console on an articulated arm, allowing easy operation from any working position with immediate access to the emergency-stop switch. -Fieldbus communication system with dual microprocessor and serial interface. -Display with 20 characters x 4 lines, showing technical parameters such as: number of programmed and completed cuts, saw blade thickness, feed length, cutting time, ammeter, and indications for over 100 diagnostic messages and warnings. -New – Display and recording of alarm and error messages, with the option to view incidents that have occurred. New – Material feed of 600 mm with cutting motor and ball screw mounted on opposed bearings. -New – Low-voltage control panel: Polyester membrane keypad with thermoformed and raised keys and actuation signal. Iedpschkwhsfx Af Iotb -Lifting stroke of the saw bow programmable directly from the control panel, allowing adaptation to the cutting material. -Ball-bearing rotary table for smooth and precise rotation. -Clamping system using two front-positioned vices, which can be freely positioned along the longitudinal axis of the workpiece. -Adjustable mechanical stops for quick positioning of the saw head at angles of 0 and 45 degrees left and right. For further technical data, please refer to the attached PDF document (page 3 of catalog excerpt).

Sąlyga: naujas, Saw blade diameter 350 mm Cutting capacity at 90 degrees: round 115 mm Cutting capacity at 90 degrees: square 95 mm Cutting capacity at 90 degrees: rectangle 180 x 95 mm Working height 925 mm Saw blade speeds 15/30/45/90 rpm Total power requirement 1.8/2.5 kW Machine weight approx. 0.41 t Space requirement approx. 0.8 x 1.0 x 1.85 m Isdefg Rlbjpfx Af Ietb Electropneumatic - semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. With linear guidance of the saw head. - New system with head gliding vertically on linear guides with ball bearing slide rails at the front. - Double gearbox drive for high transmission power - 4 cutting speeds: 15/30/45/90 rpm - Vice opening 190 mm - Stroke movement of the saw head programmable directly from the control panel, allowing adjustment to the material being cut - Pneumatic vertical vice - Saw blade HSS DMO 5 ø 350x32x2.5 for solid and profile material - Vice with counter-clamping device for double workpiece clamping - Base frame with removable coolant tray - Swarf removal brush - Length stop for repeat cuts - Material support arm, with connection option for roller conveyor/loading side - Rotary table with additional central axis

Sąlyga: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15/30/45/90 rpm Total power requirement: 1.8/2.5 kW Machine weight: approx. 0.38 t Itodpfsfgpdljx Af Ieb Space requirements: approx. 0.8 x 1.0 x 1.85 m Manual vertical circular saw for mitre cuts from 60° left to 45° right.

Sąlyga: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Iedpfxefg Rlco Af Ijtb Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle mode. CNC automatic machine with multiprocessor and two axes controlled by MEP control system of the latest generation, allowing the programming of up to 1000 different cutting programs on the same material thickness, each with different cutting lengths and quantities.

Sąlyga: geras (naudotas), Gamybos metai: 1998, pjūklo disko skersmuo: 300 mm, For sale is a MEP Tiger 300, a high-quality circular saw for metalworking applications. This machine was built in 1998 but remains in good condition. It is perfectly suited for workshops and production environments requiring a reliable and precise sawing solution. Machine features: Manufacturer: MEP (Mecchia Eredi Pio) Model: Tiger 300 Year of manufacture: 1998 Saw type: Semi-automatic/manual circular saw Blade diameter: 300 mm Cutting capacity: Suitable for round materials, square profiles, and mitre cuts Cutting angles: 90° and 45°, with mitre cuts possible in both directions Materials: Ideal for cutting iron, steel, and other metals Itjdev Tlcrepfx Af Isb Condition: Good condition Coolant supply: Integrated cooling system for improved cut quality and extended blade life

Gamybos metai: 2016, Sąlyga: naudotas, MEP pjaustymo ir lenkimo staklės, SYNTAX 28 Vienguba strypas: Ø10 - Ø28 mm (#3 - #8) Dvigubi strypai: iki Ø20 mm (#6) • Strypo buvimo detektorius • Daugiafunkcinis padavimas: spaustuvas ir transportavimo volai • Dvigubi žirklės • Lenkimo kaiščiai pagal tarptautinius standartus Isdpfxjxl Avvs Af Ietb Pastaba: Šis vaizdo įrašas yra gamintojo reklaminė demonstracija apie modelį SYNTAX 28. Jame nerodoma konkreti šiuo metu parduodama linija. Vienguba strypas: ∅10 - ∅28 mm (#3 - #8) Dvigubi strypai: Iki ∅20 mm (#6)

Sąlyga: naudotas, MEP 40 Straightening and Cutting Bench Bar Capacity: - n.1 Ø 40 mm - n.2 Ø 32 mm - n.3 Ø 26 mm - n.4 Ø 20 mm - n.5 Ø 16 mm Ijdpfsvtx Eyex Af Ijtb 22 Fy = 600 N/mm² – ft = 650 N/mm² Minimum cutting length: 800 mm Maximum length: 12,000 mm Measurement tolerance: +/- 1 mm/m Maximum positioning speed: 2 m/s Measurement evacuation speed: 2.2 m/s Number of compartments: 5 + 5

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11900715/C, pjūklo disko skersmuo: 350 mm, padavimo ilgis X ašis: 180 mm, padavimo ilgis Z ašis: 170 mm, bendras ilgis: 2 210 mm, bendras plotis: 1 100 mm, bendras aukštis: 1 550 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 120 mm, Apvalaus plieno pjovimo diapazonas ties 45°: 120 mm, įvesties srovės tipas: trifazis, sukimosi greitis (min.): 15 aps./min, sukimosi greitis (maks.): 90 aps./min, pjovimo aukštis (maks.): 170 mm, bendras svoris: 530 kg, pjūklo disko greitis: 90 aps./min, įėjimo įtampa: 400 V, Kvadratinio plieno pjovimo diapazonas 45° kampu: 100 mm, Kvadratinio plieno pjovimo diapazonas prie 90°: 105 mm, pjūklo pavara: 2 200 W, pjovimo skersmuo: 120 mm, pjūklų disko skylė: 32 mm, 2000 MEP Cobra 350AX Automatischer Kreissägen-Kaltkreissäge – Effizientes Metallschneiden für die industrielle Produktion Jetzt verfügbar: MEP Cobra 350AX, eine robuste automatische Abläng-Kreissäge, ideal für industrielle Metallbearbeitung. Baujahr 2000, in gutem Betriebszustand. Diese Maschine vereint manuelle und automatische Betriebsmodi, individuell einstellbare Schnittparameter sowie ein 350 mm Sägeblatt für konstant hochwertige Schnittergebnisse. 🔧 Hauptmerkmale: • Sägeblattgröße: 350 × 32 × 2,5 mm • Motorleistung: 2,2 kW • Sägeblattdrehzahlen: 15 / 30 / 45 / 90 U/min • Spannweiten Schraubstock: 160 mm • Spannsystem: Pneumatisch • Stromversorgung: 400V / 3~ / 50 Hz • Manueller & Automatikbetrieb: Ja • Schnitttiefe & Endanschlag: Voll einstellbar • Maschinengewicht: 530 kg • Abmessungen (L×B×H): 2.210 × 1.100 × 1.550 mm 📏 Schnittkapazitäten: Bei 0°: • Rundmaterial: 120 mm • Rechteck: 180 × 170 mm • Quadrat: 105 × 105 mm Bei 45° links: • Rundmaterial: 120 mm • Rechteck: 135 × 60 mm • Quadrat: 100 × 100 mm Bei 45° rechts: • Rundmaterial: 110 mm • Rechteck: 135 × 60 mm • Quadrat: 95 × 95 mm ⚙️ Ideale Einsatzgebiete: • Schneiden von Stahlprofilen, Rohren und Stangen • Für leichte bis mittlere industrielle Fertigungsanwendungen geeignet • Optimal für Schlossereien, Stahlhändler und produzierende Betriebe ✅ Warum die MEP Cobra 350AX? • Flexible Schnittwinkel und Profilgrößen Iedpfx Aowtr Iyef Istb • Automatik- und manueller Betrieb • Kompakt, leistungsstark und einfach in bestehende Abläufe integrierbar • Pneumatische Spanntechnik für Sicherheit und Wiederholgenauigkeit • Geringe Investitionskosten bei überzeugendem Nutzwert MEP Cobra 350AX gebraucht verkaufen Gebrauchte automatische Kreissäge Kaltkreissäge für Metallbearbeitung Pneumatische Spann-Kaltkreissäge 350mm Kreissägemaschine Industrielle Metalltrennsäge MEP Säge Baujahr 2000 Automatische Metallsäge Irland Kreissäge für Stahlprofile 400V Industrie-Kaltkreissäge

Sąlyga: geras (naudotas), Gamybos metai: 2012, Naudota MEP juostinė pjovimo staklė Tipas: Shark 452 Hydr. Dvigubas kampo pjovimas Talpa: 450 x 320 mm Pagaminimo metai: 2012 Itjdex Uq Smjpfx Af Ijb Įskaitant papildomas pjūklus

Sąlyga: geras (naudotas), Šaltinis diskinis pjūklas, metalo diskinis pjūklas, kampinis pjūklas, diskinis pjūklas, pjovimo įrenginys, metalo pjūklas Isdpfx Afjxlzyte Ijtb -Gamintojas: MEP, šaltinis metalo diskinis pjūklas TRL 300 modelis, pasukamas į abi puses -Variklis: C 112 M tipas -Galia: 2,2 / 3,0 kW -Apsisukimai: 720 / 1450 aps./min -Pjūklo diskas: Ø 315 mm -Pjovimo sritis esant 90°: 110 x 70 mm -Pjovimo sritis esant 45°: 100 mm -Priedai: įskaitant 2 pjūklo diskus, žr. nuotraukas -Išmatavimai: 1230/630/H1800 mm -Svoris: 273 kg

Sąlyga: naudotas, Gamybos metai: 1995, Saw blade diameter: 350 mm Saw blade dimensions: 350 x 32 x 2.5 mm Cutting diameter: 115 mm Stroke: 100 mm Ijdpfx Asvxlpvsf Ietb Cutting capacity at 90° – square: 95 mm Cutting capacity at 90° – flat: 180 x 95 mm Cutting capacity at 45° – round, right & left: 110 mm Cutting capacity at 45° – square, right & left: 95 mm Cutting capacity at 45° – flat, right & left: 125 x 95 mm Cutting capacity at 60° – round: 90 mm Cutting capacity at 60° – square: 80 mm Cutting capacity at 60° – flat: 90 x 95 mm Cutting speed: 15 - 90 m/min Total power requirement: 2.6 kW Machine weight approx.: 375 kg Space requirements approx.: 1000 x 950 x 1800 mm Features: - Mitre adjustment: 60° left / 45° right - Coolant system - 2 speeds - Machine base - Operating manual

Sąlyga: naujas, Cutting diameter: 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: -- mm Cutting diameter: 350 mm Cutting speed: 15 - 100 m/min Total power requirement: 4.0 kW Machine weight approx.: 2800 kg Space requirement approx.: 2200 x 3200 x 2200 mm Fully automatic bandsaw with dual-column guidance system for series cutting, especially in hard-to-machine materials and solid stock. With this machine, MEP offers you a technologically advanced system built from first-class materials, resulting in an exceptionally robust and torsion-resistant structure. The extremely solid saw frame made of cast iron ensures the necessary stability for impressive cutting results, while the powerful cast iron columns, along which the saw frame glides on pre-tensioned linear guides, guarantee the highest cutting precision, even under maximum load. The modern machine control unit (MEP NC 5.0) offers maximum user convenience and ensures trouble-free operation (monitoring/evaluation/correction in real-time). MAXIMUM PERFORMANCE > The two operating modes (semi-automatic and automatic) enable efficient cutting under any conditions. > The control system allows storage of up to 100 cutting programs, each with different quantities and lengths, minimizing programming time for frequently repeated jobs. > The automatically detected start position of the saw head reduces setup time. > The saw head feed, via linear guides driven by hydraulic cylinders with pre-tensioned ball bushings, reduces mechanical vibrations during cutting and provides increased stability. > The automatic alignment of the front saw blade guide head, based on the dimensions of the bars to be cut, reduces processing time. > Saw blade tension is effected by the brushless motor and constantly monitored and automatically maintained at the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and can cut any length. > The vertical roller pair holds and aligns any type of bar or bundle being fed. > The vector inverter enables stepless adjustment of the blade speed from 15 to 100 m/min, allowing cuts on any material. > The motorized chip conveyor can be mounted on either the right or left of the cutting area. FEATURES: Fully automatic control - NC 5.0 -Innovative (Windows CE-based) touch-screen control with additional soft-touch keys for frequent operating functions -USB port Itodpfolf Tu Uex Af Iob -Joystick for manual axis (X-Y) control -Controlled blade descent with automatic compensation via a servo valve mounted in the cylinder, continuous monitoring of preset torque, and precise feed adjustment in mm/min -Adjustment/preselection of continuously variable band speed (m/min) -Saw band tension with band tension monitoring and display on-screen via electronic transducer -Automatic detection of cut start -Large 7" color touchscreen for display and selection of all machine functions and parameter settings, enabling programming within seconds. Detailed display of alarm and error messages -Numerous...

Sąlyga: naudotas, Gamybos metai: 2000, Saw blade diameter: 350 mm Saw blade dimensions: 350 x 32 x 2.5 mm Cutting diameter: 115 mm Stroke: 100 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (flat): 180 x 95 mm Cutting capacity at 45 degrees (round, left & right): 110 mm Cutting capacity at 45 degrees (square, left & right): 95 mm Cutting capacity at 45 degrees (flat, left & right): 125 x 95 mm Cutting capacity at 60 degrees (round): 90 mm Cutting capacity at 60 degrees (square): 80 mm Cutting capacity at 60 degrees (flat): 90 x 95 mm Cutting speed: 15 / 30 / 45 / 90 m/min Total power requirement: 2.6 kW Iodpfx Ajv Rrruef Ijtb Machine weight: approx. 375 kg Space requirement: approx. 1000 x 950 x 1800 mm Equipment: - with mitre adjustment 60° left / 45° right - coolant system - 2 speeds - machine base - operating manual

Sąlyga: naudotas, Gamybos metai: 1990, Saw blade diameter: 350 mm Saw blade dimensions: 350 x 32 x 2.5 mm Cutting diameter: 115 mm Cutting range at 90°: square 95 mm Cutting range at 90°: flat 180 x 95 mm Cutting range at 45°: round (right & left) 110 mm Cutting range at 45°: square (right & left) 95 mm Cutting range at 45°: flat (right & left) 125 x 95 mm Cutting range at 60°: round 90 mm Cutting range at 60°: square 80 mm Cutting range at 60°: flat 90 x 95 mm Cutting speed: 15 - 90 m/min Total power requirement: 2.5 kW Isdpfxewvl E Ro Af Iotb Machine weight: approx. 400 kg Space requirement: approx. 1000 x 950 x 1800 mm Equipment: - with mitre adjustment 60° left / 45° right - machine base

Sąlyga: naujas, Cutting diameter: 250 mm Saw band length: 2950 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.4 t High-performance mitre band saw for cutting from 0° to 60° to the left CCS (CutControlSystem) for automatic cutting (infinitely variable feed control and automatic shutdown at end of cut) Description: - Manual cutting cycle Ijdpfxjxz Hhze Af Iotb - AUTOMATIC CUTTING: (via selector switch) with infinitely variable adjustment of lowering speed and setting the cutting pressure via compensating spring - Sturdy, torsion-resistant, and low-vibration saw frame made of cast steel - Quick-release vice - Carbide band guides for maximum cutting precision - Large dimension, adjustable idler wheels made of cast steel - Hydraulic unit for saw band tensioning and monitoring with display on manometer (band tension: 900 kg) - Clearly arranged control panel with all control elements - Electric coolant pump for band cooling and lubrication - Swarf cleaning brush for cleaning the saw band

Sąlyga: naujas, Model designation Shark 282 CCS Ijdpfx Asgvkbcef Iotb

Sąlyga: naujas, Model designation Itjdjgvkglepfx Af Iob Shark 281 SXI evo

Sąlyga: naujas, Model designation Iedpfxsgvkchj Af Ietb Shark 281 CCS