Mep Italien pirkti naudotą (136)

Būklė: naujas, Saw blade dimensions: 3650 x 27 x 0.9 mm Cutting speed: 15 – 100 m/min Vice opening: 335 mm Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 45°: round 260 / 200 mm Cutting capacity at 45°: square 250 / 180 mm Cutting capacity at 45°: flat 270 x 200 / 200 x 160 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170 x 170 mm Total connected load: 2.2 kW Weight: 1,105 kg Dimensions: 2700 x 2300 x 1800 mm Redpfx Akoyv Nyljzjt Electrohydraulic fully automatic band saw with multi-microprocessor control and additional semi-automatic, semi-automatic dynamic, and manual operation modes. - Automatic cycle (cuts from 0° to 60° left). CNC automatic operation with two controlled axes, allowing the programming of up to 1000 different cutting programs for materials of identical thickness, each with separate cutting lengths and quantities. - Semi-automatic, semi-automatic dynamic, and manual cycles (cuts from 45° right to 60° left) - Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand control button) - Manual or semi-automatic dynamic cycle for direct cutting operations without programming. Selected features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines for showing technical parameters such as: blade speed, programmed and completed cut quantities, blade thickness, feed length, cutting time, ammeter, blade tension, and display of approximately 100 diagnostic messages and warnings — available in the user’s selected language. - Logging and display of alarm and error messages, with the possibility to review past incidents. - Automatic parameter setting via control system when a new drive or inverter is installed. - Electronic inverter for infinitely variable blade speed adjustment from 15 to 100 m/min. - Latest generation hydraulic control unit, offering high performance and low energy consumption. - New 600 mm material feed with stepper motor and ball screw mounted on opposing ball bearings. - Saw bow stroke programmable directly from the control panel for adaptation to the workpiece. - Electronic blade tension monitoring. - Automatic cutting force monitoring via a servo valve mounted directly on the cylinder. - Coolant tank (equipped with 2 electric pumps for band lubrication and cooling) built into the machine base. - Chip drawer (can be replaced by a chip conveyor — see special accessories) - Prepared for installation of a minimum quantity lubrication system for the blade (optional), alongside the standard emulsion oil lubrication. - Chip removal brush. - Machine is configured for pallet truck transport. - Bi-metal band saw blade suitable for solid and profile material.

Būklė: naujas, Cutting capacity at 90 degrees: round 300 mm Cutting capacity at 90 degrees: square 250 mm Cutting capacity at 90 degrees: flat 380x250 mm Cutting capacity at 45 degrees left: round 260 mm Cutting capacity at 45 degrees left: square 250 mm Cutting capacity at 45 degrees left: flat 300x200 mm Cutting capacity at 60 degrees left: round 180 mm Cutting capacity at 60 degrees left: square 170 mm Cutting capacity at 60 degrees left: flat 200x170 mm Cutting capacity at 45 degrees right: round 240 mm Cutting capacity at 45 degrees right: square 210 mm Cutting capacity at 45 degrees right: flat 280x160 mm Bandsaw blade dimensions: 3770x27x0.9 mm Vise opening: 385 mm Cutting speed: 40/80 m/min Total power: 1.5/1.8 kW Weight: 695 kg Electrohydraulic, semi-automatic bandsaw with semi-automatic dynamic/manual function. Equipped with MEP-30 control for mitre cuts from 45° right to 60° left. MEP 30 represents the latest generation of control systems. Semi-automatic function: - Vise closes and motor starts - Saw head lowers for cutting Rjdsyv Ntrjpfx Akzjt - Motor switches off - Saw head raises - Vise opens Semi-automatic dynamic system: - Manual lowering of the saw bow to the desired position - Cycle start via hand button - Upper position is automatically memorized Main features: - Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar) - Electronic machine monitoring with next-generation microcontroller - Electrical system centralized in main control cabinet - Display of alarms, diagnostics and machine functions (cutting time, number of pieces cut, drive current of saw motor, saw head position, blade speed, blade tension) - Manual/semi-automatic/dynamic operation as standard Additional features: - Low-voltage control panel: polyester membrane keypad with thermoformed, raised keys and confirmation signal - Manual cycle selector lever, IP55, 24V - Complete program for all special cutting cycles - New hydraulic control unit with low energy consumption and stand-by mode - Rotary table with roller bearing, 420 mm, fitted with preloaded thrust bearing and interchangeable steel work table - Saw bow stroke programmable directly from the control panel to match cutting material - Clamping device, laterally adjustable left and right, with quick-action vise - Manual blade tension control with display on screen via electronic transducer

Būklė: naujas, Diskinio pjūklo matmenys: 350 x 32 x 3,4 mm 2 greičiai: 1700/3400 aps./min Pjovimo sritis 90° kampu: apvalus 120 mm Pjovimo sritis 90° kampu: kvadratinis 105 mm Pjovimo sritis 90° kampu: plokščias 180x70 mm Pjovimo sritis 45° kampu: apvalus 120/110 mm Rjdpfx Akoyv Nqqjzot Pjovimo sritis 45° kampu: kvadratinis 100/95 mm Pjovimo sritis 45° kampu: plokščias 135x60 mm Galia: 1,5/2,2 kW Svoris: 280 kg

Būklė: naujas, Pjūklo juostos matmenys: 2950x27x0,9 mm 2 greičiai: 36/72 m/min Veržlės atidarymas: 285 mm Pjovimo sritis prie 90 laipsnių: apvali 250 mm Pjovimo sritis prie 90 laipsnių: kvadratinė 220 mm Pjovimo sritis prie 90 laipsnių: plokščia 280x220 mm Pjovimo sritis prie 45 laipsnių: apvali 230/200 mm Pjovimo sritis prie 45 laipsnių: kvadratinė 200/170 mm Pjovimo sritis prie 45 laipsnių: plokščia 220x200/200x140 mm Pjovimo sritis prie 60 laipsnių: apvali 120 mm Pjovimo sritis prie 60 laipsnių: kvadratinė 80 mm Pjovimo sritis prie 60 laipsnių: plokščia 140x100 mm Redpfxjyv Npte Akzet Galia: 1,5 / 1,8 kW Svoris: 440 kg Matmenys: 1700x1000x1650 mm - Su pusiau automatiniu nusileidimu - CUT CONTROL SYSTEM leidžia pusiau automatinį pjūklo lanko nusileidimą pagal pjūklo galvos svorį - Nusileidimo greitis reguliuojamas be pakopų, todėl vienkartiniai pjūviai gali būti atliekami tolygiai stumiant - SHARK 282 CCS turi pasukamą stalą kampiniam pjovimui iš abiejų pusių. Pjovimas visada vyksta toje pačioje griovelyje

Būklė: naujas, 2 speeds: 36/72 m/min Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330x260 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170x170 mm Cutting capacity at 45°: round 260/200 mm Cutting capacity at 45°: square 250/180 mm Cutting capacity at 45°: flat 270x200/200x160 mm Saw blade dimensions: 3650x27x0.9 mm Total power requirement: 1.5/1.8 kW Machine dimensions: 2130x1400x1950 mm Weight: 670 kg Electro-hydraulic, semi-automatic bandsaw with semi-automatic dynamic/manual operation. Equipped with an MEP-30 controller for mitre cuts from 45° right to 60° left. MEP 30 is the latest generation of controller. Semi-automatic function: - Vice closes and motor starts - Saw head lowers to perform the cut - Motor switches off Rsdpfxoyv Nmle Akzjt - Saw head rises - Vice opens Semi-automatic dynamic system: - Manual lowering of the saw bow to the desired position - Cycle start via hand button - Upper position is stored automatically Main features: - Hydraulic unit with high-efficiency electric valve and high-pressure hydraulic pump (200 bar) - Electronic machine control with new generation micro-controller - Electrical system centralised in the main switch cabinet - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, saw blade motor current draw, saw head position, blade speed, blade tension) - Manual/semi-automatic/dynamic function included as standard Some features: - Operating panel with low voltage: polyester membrane keypad with thermoformed, raised push buttons and acknowledgment control signal - IP55 manual cycle lever, 24 V - Complete program for all special cutting cycles - New hydraulic controller with low energy consumption, standby operation - Turntable on 420 mm roller bearing with preloaded thrust bearing and replaceable steel work table - Saw bow lift travel programmable directly from the control panel for adapting to different cutting materials - Clamping device adjustable laterally to the left and right, with quick-action vice - Manual blade tension control with on-screen display via electronic converter

Būklė: naujas, Pjūklo disko skersmuo: 350 x 32 x 2,5 mm 4 greičiai: 15/30/45/90 aps/min Spaustuvas: 190 mm Pjovimo diapazonas ties 90°: apvalus – 115 mm Pjovimo diapazonas ties 90°: kvadratinis – 95 mm Pjovimo diapazonas ties 90°: plokščias – 180x95 mm Pjovimo diapazonas ties 60° kairėje: apvalus – 90 mm Pjovimo diapazonas ties 60° kairėje: kvadratinis – 90 mm Pjovimo diapazonas ties 45° kairėje: apvalus – 110 mm Pjovimo diapazonas ties 45° kairėje: kvadratinis – 95 mm Pjovimo diapazonas ties 45° kairėje: plokščias – 125x95 mm Pjovimo diapazonas ties 45° dešinėje: apvalus – 110 mm Pjovimo diapazonas ties 45° dešinėje: kvadratinis – 95 mm Pjovimo diapazonas ties 45° dešinėje: plokščias – 125x95 mm Bendra galia: 1,8/2,5 kW Svoris: 410 kg Priedai/Įranga: Elektropneumatinis pusiau automatinis vertikalus skersinio pjovimo įrenginys su mikroprocesoriniu valdymu, skirta kampiniams pjūviams nuo 60° kairėje iki 45° dešinėje - Pasukamas stalas su papildoma vidurio ašimi Rsdpfx Akjyv Nl Iozjt - Dviguba linijinė kreiptuvė

Būklė: naujas, Bandsaw blade dimensions: 4640x34x1.1 mm 2 speeds: 15–100 m/min Vice opening: 515 mm Cutting capacity at 90 degrees: square 320 mm Cutting capacity at 90 degrees: round 330 mm Cutting capacity at 90 degrees: flat 510x320 mm Cutting capacity at 45 degrees left: round 320 mm Cutting capacity at 45 degrees left: square 320 mm Cutting capacity at 45 degrees left: flat 350x320 mm Cutting capacity at 60 degrees left: round 230 mm Cutting capacity at 60 degrees left: square 230 mm Cutting capacity at 60 degrees left: flat 230x310 mm Cutting capacity at 45 degrees right: round 320 mm Cutting capacity at 45 degrees right: square 320 mm Cutting capacity at 45 degrees right: flat 380x320 mm Cutting capacity at 60 degrees right: round 250 mm Cutting capacity at 60 degrees right: square 250 mm Cutting capacity at 60 degrees right: flat 250x320 mm Total power requirement: 4 kW Weight: 1190 kg Machine dimensions: 2000x1200x1800 mm Electro-hydraulic semi-automatic bandsaw with MEP 30 controller for miter cuts from 0° to 60° left. The MEP 30 represents the latest generation of control units. Semi-automatic operation: - Vice closes and motor starts - Saw head lowers for cutting - Motor switches off - Saw head raises and vice opens Rsdpfx Aeyv Nkkekzjt Main features: - Hydraulic unit with high-performance solenoid valve and high-pressure hydraulic pump (200 bar) - Electronic machine control with new-generation microcontroller - Centralized electrical system in the main control cabinet - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, saw blade motor power consumption, saw head position, bandsaw speed, blade tension)

Būklė: naujas, Pjūklo disko skersmuo: 350 x 32 x 2,5 mm 2 greičiai: 30/60 aps./min Spaustuvas: 130 mm Pjovimo sritis prie 90° apvaliems: 115 mm Pjovimo sritis prie 90° kvadratiniams: 110 mm Pjovimo sritis prie 90° plokštiems: 130x80 mm Pjovimo sritis prie 45° į kairę apvaliems: 100 mm Pjovimo sritis prie 45° į kairę kvadratiniams: 85 mm Pjovimo sritis prie 45° į kairę plokštiems: 90x80 mm Pjovimo sritis prie 45° į dešinę apvaliems: 75 mm Pjovimo sritis prie 45° į dešinę kvadratiniams: 75 mm Pjovimo sritis prie 45° į dešinę plokštiems: 90x65 mm Bendras galios poreikis: 1,1/2,2 kW Svoris: 220 kg Priedai: Rodpfx Aoyv Ni Tekzjt - įskaitant staklių stovą

Būklė: naujas, 2 greičiai: 36/72 m/min Spaustuvo atidarymo plotis: 285 mm Pjovimo sritis 90° kampu: apvalus 250 mm Redpfsyv Nfuox Akzot Pjovimo sritis 90° kampu: kvadratinis 230 mm Pjovimo sritis 90° kampu: plokščias 280x200 mm Pjovimo sritis 45° kampu: apvalus 190 mm Pjovimo sritis 45° kampu: kvadratinis 180 mm Pjovimo sritis 45° kampu: plokščias 180x180 mm Pjovimo sritis 60° kampu: apvalus 120 mm Pjovimo sritis 60° kampu: kvadratinis 110 mm Pjovimo sritis 60° kampu: plokščias 110x110 mm Pjūklinės juostos matmenys: 2950 x 27 x 0,9 mm Galia: 1,5 / 1,8 kW Svoris: 435 kg Matmenys: 1700x1000x1840 mm Pusiau automatinė funkcija: - Spaustuvas uždaromas, variklis įsijungia - Pjūklo galva nuleidžiama pjovimui - Variklis išjungiamas - Pjūklo galva pakeliama – spaustuvas atidaromas

Būklė: naujas, Cutting range at 90°: round 350 mm Cutting range at 90°: square 350 mm Saw blade dimensions: 4640x34x1.1 mm Vise opening: 355 mm Saw blade speed: 15–115 m/min Machine weight: approx. 2,800 kg Space requirement: approx. 3050x2190x2200 mm Shark 350 NC HS 5.0 – automatic hydraulic band saw machine in a double-column design for 0° cuts on solid materials and profiles of steel, stainless steel, and steel alloys up to max. 350x350 mm. Rsdpoyv Nd Rsfx Akzst Standard equipment includes: + Powered chip conveyor, installable on either the right or left side of the machine. + Adjustable clamping pressure for the vices. + Feed unit with vertical rollers for lateral material support. - Numerically controlled band saw machine, also operable in semi-automatic mode, equipped with the new MEP 50 control unit (Windows CE-based, developed by MEP for automatic machines). - "Clean cut" cycle: The feeder pushes the workpiece backwards to avoid scoring on the cut surface when the blade returns at the end of the cut. - Fieldbus communication system with dual microprocessor and serial connection. - User interface with 7" touchscreen display and mechanical buttons for band saw operating functions, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters. - Automatic determination of the starting cutting position. - CNC machine for storing up to 100 cutting programs with different quantities and cut lengths. It is also possible to select up to 100 programs as a sequence. - Sturdy cast iron construction to absorb vibrations, ensuring stable cutting precision and long saw blade life. - Hydraulic feed of the saw frame via linear guides with preloaded ball bearing rails. - Hydraulic control unit for opening/closing the feed and front vices. - Continuously variable saw blade speed from 15 to 110 m/min via vector inverter. - Material feed via stepper motor and recirculating ball screw mounted on opposing bearings with a 600 mm stroke, repeatable for cutting any length. - Maximum remnant length 120 mm + cut length (OPTIONAL: special feeder jaws to minimize remnant to 25 mm + cut length). - Cut monitoring system (OPTIONAL). - Material feeder with self-aligning feeder vice for feeding slightly bent material. - Saw blade drive wheel secured by a conical clamping ring for optimal fastening and simultaneous axial adjustment. - Management software for real-time control/evaluation/correction of: - Cutting force - Cutting torque and saw blade tension compared to programmed values. - Adjustable saw blade guide heads made of steel with combined roller and hard metal guides, including control valves for traditional circulation lubrication. - Prepared for installation of OPTIONAL minimal quantity lubrication system. - Adjustment of the saw blade drive wheel for blade change directly from the operator console. - Automatic adjustment of the front saw blade guide head to match material size. - Machines...

Būklė: naujas, Juostinio pjūklo matmenys: 3320x27x0,9 mm 2 greičiai: 40/80 m/min Vise atidarymo plotis: 335 mm Pjovimo sritis 90° kampu: apvalus 300 mm Pjovimo sritis 90° kampu: kvadratinis 260 mm Pjovimo sritis 90° kampu: plokščias 330x260 mm Pjovimo sritis 45° į kairę: apvalus 260 mm Pjovimo sritis 45° į kairę: kvadratinis 250 mm Pjovimo sritis 45° į kairę: plokščias 270x200 mm Pjovimo sritis 60° kampu: apvalus 180 mm Pjovimo sritis 60° kampu: kvadratinis 170 mm Pjovimo sritis 60° kampu: plokščias 170x170 mm Pjovimo sritis 45° į dešinę: apvalus 200 mm Redpfeyv Na Sox Akzot Pjovimo sritis 45° į dešinę: kvadratinis 180 mm Pjovimo sritis 45° į dešinę: plokščias 200x160 mm Staklių svoris apie 640 kg Užimamas plotas apie 2140x1300x1950 mm

Būklė: naujas, 2 greičiai 36/72 m/min Spaustuvo atidarymas 285 mm Juostinio pjūklo matmenys 2950 x 27 x 0,9 mm Pjovimo sritis esant 90 laipsnių: kvadratas 220 mm Pjovimo sritis esant 90 laipsnių: apvalus 250 mm Pjovimo sritis esant 90 laipsnių: plokščias 280x220 mm Pjovimo sritis esant 60 laipsnių: apvalus 120 mm Pjovimo sritis esant 60 laipsnių: kvadratas 80 mm Pjovimo sritis esant 60 laipsnių: plokščias 140x100 mm Pjovimo sritis esant 45 laipsnių: apvalus 230/200 mm Pjovimo sritis esant 45 laipsnių: kvadratas 200/170 mm Pjovimo sritis esant 45 laipsnių: plokščias 220x200/200x140 mm Bendras galios poreikis 1,5/1,8 kW Svoris 485 kg Redpfxoyv Narj Akzet Staklių matmenys 1970x1150x1840 mm Pusiau automatinė funkcija: - Spaustuvas užsidaro ir variklis įsijungia - Pjūklo galva nusileidžia pjovimui - Variklis išsijungia - Pjūklo galva pakyla, spaustuvas atsidaro Pusiau automatinė dinaminė sistema: Rankinis pjūklo lanko nuleidimas iki norimos padėties ir ciklo paleidimas rankiniu mygtuku. Viršutinė padėtis įsimenama automatiškai.

Būklė: naujas, Saw band dimensions: 3650x27x0.9 mm Cutting speed: 15/100 m/min Cutting capacity at 90° (round): 280 mm Cutting capacity at 90° (square): 260 mm Cutting capacity at 90° (flat): 330x260 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (square): 250 mm Cutting capacity at 45° (flat): 270x200 mm Cutting capacity at 60° (round): 180 mm Cutting capacity at 60° (square): 170 mm Cutting capacity at 60° (flat): 170x170 mm Total power requirement: 2.2 kW Vise opening: 340 mm Weight: 1240 kg Dimensions: 2020x2040x1740 mm Electrohydraulic fully automatic bandsaw with additional semi-automatic function, for cutting angles from 0° to 60° to the left. Redpjyv I Sysfx Akzjt Compact machine equipped with the new Windows "CE"-based MEP-50 controller and a 7" touch screen display for managing all machine parameters. Simple operation and real-time monitoring of all cutting parameters. Material feed is operated by stepper motor via ball screw spindle mounted on opposing ball bearings; single stroke 600 mm – repeatable for any cutting length. Easy programming – just enter the cut length and quantity, then press "START". - Electronic blade tension control - Automatic monitoring of cutting load by servo valve mounted directly on the cylinder - Blade rotation monitoring with instant stop in case of saw blade blockage Chip removal brush and emulsion coolant pump included as standard.

Būklė: naujas, Juostos pjūklo matmenys 2950x27x0,9 mm 2 greičiai 36/72 m/min Spaustuvo atidarymas 285 mm Pjovimo sritis prie 90°: apvalus 250 mm Pjovimo sritis prie 90°: kvadratinis 230 mm Pjovimo sritis prie 90°: plokščias 280x200 mm Pjovimo sritis prie 45°: apvalus 190 mm Pjovimo sritis prie 45°: kvadratinis 180 mm Rodpfx Akoyvvqkezot Pjovimo sritis prie 45°: plokščias 180x180 mm Pjovimo sritis prie 60°: apvalus 120 mm Pjovimo sritis prie 60°: kvadratinis 110 mm Pjovimo sritis prie 60°: plokščias 110x110 mm Bendras galios poreikis 1,5/1,8 kW Svoris 375 kg Matmenys 1700x1000x1650 mm Įranga: - su pusiau automatiniu nuleidimu - CUT CONTROL SYSTEM leidžia pjūklo lanko pusiau automatinį nuleidimą dėl pjūklo galvos svorio - Nuleidimo greitis yra stepless reguliuojamas. Taip galima atlikti pavienius pjūvius su tolygiu padavimu.

Būklė: geras (naudotas), Gamybos metai: 1998, pjūklo disko skersmuo: 300 mm, For sale is a MEP Tiger 300, a high-quality circular saw for metalworking applications. This machine was built in 1998 but remains in good condition. It is perfectly suited for workshops and production environments requiring a reliable and precise sawing solution. Machine features: Manufacturer: MEP (Mecchia Eredi Pio) Model: Tiger 300 Year of manufacture: 1998 Saw type: Semi-automatic/manual circular saw Blade diameter: 300 mm Cutting capacity: Suitable for round materials, square profiles, and mitre cuts Cutting angles: 90° and 45°, with mitre cuts possible in both directions Rodpsv Tlcrofx Akzot Materials: Ideal for cutting iron, steel, and other metals Condition: Good condition Coolant supply: Integrated cooling system for improved cut quality and extended blade life

Būklė: naudotas, Gamybos metai: 1997, Juostinio pjūklo juostos matmenys: 3150 x 25,4 x 0,9 mm 2 greičiai: 20/40 m/min Pjovimo sritis ties 90°: apvalus 260 mm Pjovimo sritis ties 90°: kvadratinis 250 mm Pjovimo sritis ties 90°: plokščias 320 x 200 mm Pjovimo sritis ties 45°: apvalus 230 mm Pjovimo sritis ties 45°: kvadratinis 210 mm Rodpfx Aoyyc A Ijkzjt Pjovimo sritis ties 45°: plokščias 240 x 200 mm Priedai: – juostinių pjūklų juostų rinkinys

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Naudota automatinė juostinė pjovimo staklės MEP SHARK 310 CNC HS Pjūklo matmenys: 4640x34x1,1 mm Kintamas pjovimo greitis: 15-115 m/min Pjovimo galia: apvalus 310 mm, kvadratinis 310x310 mm Automatinis juostos įtempiklis Automatinis drožlių šalintuvas Papildoma įranga: vertikalus spaustuvas Staklių svoris: 2200 kg Rsdpoyyuxnsfx Akzot Staklės puikios būklės, bus visiškai patikrintos ir aptarnautos.

Būklė: dilaminuotas dirbtuvėje (naudotas), Naudota pusiau automatinė juostinė pjovimo staklės MEP Shark 281 sxi evo Trys darbo režimai: pusiau automatinis, rankinis ir rankinis dinaminis (gravitacinis) Juostos matmenys: 2950 x 27 x 0,9 mm Dvi pjovimo juostos greičiai: 36/72 m/min Maks. spaustuvo atidarymas: 285 mm Pjovimo talpa: prie 0° apvalus 250 mm, stačiakampis 280x200 mm prie 45° apvalus 190 mm, stačiakampis 180x180 mm prie 60° apvalus 120 mm, stačiakampis 110x110 mm Rsdpfx Aksyyn Sujzet Pagaminimo metai: 2006 Svoris: 435 kg Pilnai aptarnauta.

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 275 mm, Apvalaus plieno pjovimo diapazonas ties 45°: 70 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 80 mm, pjovimo greitis: 4 590 mm/min, bendras svoris: 110 kg, Kvadratinio plieno pjovimo diapazonas 45° kampu: 6 060 mm, Kvadratinio plieno pjovimo diapazonas prie 90°: 7 070 mm, sukimosi greitis (min.): 45 aps./min, sukimosi greitis (maks.): 90 aps./min, Diskinio diametras: ø275 mm 2 sukimos greičiai: 45 ir 90 aps./min. Tinka: plienui, aliuminiui ir spalvotiesiems metalams Kampinis pjovimo diapazonas: -45° ir +45° Redpfoyplwlex Akzst Pjovimo plotis 90° apvalus: ø80 mm Pjovimo plotis 90° kvadratas: 70 x 70 mm Pjovimo plotis 90° stačiakampis: 100 x 60 mm Pjovimo plotis 45° apvalus: ø70 mm Pjovimo plotis 45° kvadratas: 60 x 60 mm Pjovimo plotis 45° stačiakampis: 70 x 60 mm Pilnai su: aušinimo sistema Kilmės šalis: Italija Variklio galia: 1,9 kW Staklių matmenys (I×P×A): 900 x 700 x 1650 mm Staklių svoris: 110 kg

Būklė: beveik kaip naujas (naudotas), Overall length: 1500 mm Width: 500 mm Rsdpfjfn Thhsx Akzet Height adjustable with leveling feet: +/- 900 mm 6 rollers, diameter: 60 mm Roller width: 430 mm

Būklė: naujas, Length: 1500 mm 6 rollers made of steel tube, width: 185 mm Diameter: 20 mm Rodpfx Ajfxu Tkokzst Height adjustable continuously: 650 - 1030 mm Required space: 1500 x 250 x 650/1030 mm

Būklė: naujas, Pjovimo skersmuo 250 mm Juostinio pjūklo juostos ilgis 2950x27x0,9 mm Juostos greitis 36/72 m/min Bendras galios poreikis 1,8 kW Staklių svoris apie 440 kg Absoli speciali kaina!! 7170,-EUR (Dabartinė kaina nuo 2024 m. – 9425,-EUR) Bazinis komplektas: Spaustuvai su greito reguliavimo ir reguliuojamais kreipiančiaisiais Rjdefg E H Nspfx Akzjt Hidraulinė juostos įtempimo sistema su slėgio indikatoriumi Stovas su nuimama aušinimo skysčio talpa Drožlių šepetys Nustatyti preciziniai sustojimai pjovimui: 0°, 45° ir 60° kairėje bei 45° dešinėje Sukamasis stalas dvigubiems kampiniams pjūviams Elektrinė aušinimo sistema 48 V (Galima sumontuoti mikro-purškimo įrenginį)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, Naudotas automatinis juostinis pjūklas MEP Shark 332 nc 5.0 Juostos matmenys: 3320x27x0,9mm Pjovimo kampas: nuo -45° iki +60° Juostos pjovimo greitis: nuo 15 iki 100 m/min Pjovimo galia ties 0°: - apvalus 300mm - kvadratinis 260mm - stačiakampis 330x260mm Keturi darbo režimai: rankinis, pusiau automatinis dinaminis, pusiau automatinis ir automatinis Pagaminimo metai: 2017 Įrenginio svoris: 1150kg Papildoma įranga: - Speciali spaustuvė likučių sumažinimui Rodexz Ulbspfx Akzst - Komplektas IoT Industry 4.0 Ready Įrenginys kaip naujas. Tik 515 darbo valandų.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Naudotas automatinis juostinis metalo pjūklas MEP SHARK 282 nc evo Pagaminimo metai: 2011 Pjūklo juostos matmenys: 2950x27x0,9 mm Rsdeykvg Hepfx Akzst Pjovimo kampas: nuo -45° iki +60° Keturi darbo režimai: rankinis, pusiau automatinis dinaminis, pusiau automatinis ir automatinis Pjūklo greitis: nuo 15 iki 100 m/min Pjovimo galimybės 0°: - apvalus 250 mm - kvadratinis 220 mm - stačiakampis 280x220 mm Staklių svoris: 980 kg Staklės pilnai atnaujintos.

Būklė: naudotas, Gamybos metai: 2003, Pjūklo diskas: 300x32x2,5 mm Pjovimo sritis prie 90°: apvalus – 10-90 mm Pjovimo sritis prie 90°: plokščias – 80x10-80 mm Pjovimo sritis prie 90°: kvadratinis – 10-80 mm Pjovimo sritis prie 90°: apvalus (vientisas) – 10-40 mm Pjovimo sritis prie 90°: plokščias (vientisas) – 40x10-40 mm Pjovimo sritis prie 90°: kvadratinis (vientisas) – 10-40 mm Sūkių dažnis: 1700/3400 aps./min Rjdpfxsyv Nvte Akzst Staklių svoris apie 600 kg Užimamas plotas apie 2590x1910x1910 mm Priedai: - Kojinis jungiklis su avariniu stabdymu - Mikro purškimo įranga - HM diskinis pjūklas 350 mm