Juostinis pjūklas

MEP SHARK PH 262 HB

Sąlyga: naujas, Table length 2400 mm Table width 1200 mm Table height (side panel) 200 mm Weight 981 kg Space required approx. 2400 x 1200 mm SIEGMUND authorized dealer – all items available! !! SPECIAL PROMOTION !! SIEGMUND Welding Table Retro 2400x1200x200 incl. accessories SIEGMUND Welding Table like 25 years ago with plasma nitriding and modern table legs Product description - High-quality steel S355J2+N + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Bore diameter Ø 28 mm - Surface borehole grid: 100x100 mm - Corners, edges, and bores rounded - Side panel height 200 mm - Side panel bores in a diagonal grid - Ribbed reinforcement - Grid lines allow for precise setups Welding tables are fitted with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Features: - 28 mm bore pattern / dimensions 2400 x 1200 x 200 mm Kedpexflftsfx Af Iowt - plasma nitrided version with scale - includes 4x standard legs - includes accessory kit (see picture 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Sąlyga: naujas, Electric voltage: 400 V Frequency: 50 Hz Number of phases: 3 / 3 Ph Weight: 486 kg Blade dimensions: 2700 x 27 x 0.9 mm Kwsdpfx Asd R Uz Tjf Iet

Sąlyga: naujas, Quantity: 70 items Weight: 90 kg Condition: New Hole diameter: 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe Screw Clamp D28 90° – Art. No. 4028397 3x Pipe Screw Clamp D28 180° – Art. No. 4028396 3x Pipe Screw Clamp D28 45° – Art. No. 4028398 3x Pipe Screw Clamp D28 300x150 – Art. No. 4028399 3x Pipe Screw Clamp D28 300x200 – Art. No. 4028400 15x Ball Lock Pin D28x50 – Art. No. 4027663 10x Locking Pin D28x80 – Art. No. 4028876 4x Universal Stop D28 100x50x25 mm – Art. No. 4028469 4x Universal Stop D28 150x50x25 mm – Art. No. 4028470 4x Universal Stop D28 225x50x25 mm – Art. No. 4027657 2x Universal Stop D28 300x50x25 mm – Art. No. 4027659 2x Clamp Stop Angle D28 75x50x75x25 mm – Art. No. 4028657 2x Clamp Stop Angle D28 175x50x75x25 mm – Art. No. 4028658 2x Clamp Stop Angle D28 175x50x175x25 mm – Art. No. 4028649 2x Clamp Stop Angle D28 175x50x75x25 mm – Art. No. 4028652 2x Clamp Stop Angle D28 175x50x175x25 mm – Art. No. 4028653 Kwjdpfx Aewth N Tof Iet 2x Clamp Stop Angle D28 275x50x175x25 mm – Art. No. 4028654 1x Clamp and Stop Angle Set D28 300 x 275 x 100 mm (1x left, 1x right) – Art. No. 4028847 2x Flat Angle D28 175x175x25 mm, 1x elongated hole + 3x round holes – Art. No. 4028655

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, aušinimo tipas: vanduo, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feeder case VR 4000 ➤ Fronius standard intermediate hose package from 1.5 m ➤ Fronius trolley ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator This unit can weld almost all materials, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. For this, you only need an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and load characteristic curves to further expand the functions of the TPS device. ----- Kwodpewbh Ifsfx Af Ijt IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, 1230 Vienna! ✔ Insured pallet shipping available! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For your information, we purchase used devices in excellent condition, disassemble them, check everything thoroughly, replace any worn parts if necessary, and only after a successful test weld do we approve them for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn holes or dents scattered on the device! When you buy from us, you get an item that is worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and the requirements for intra-community supply within the EU are met, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no margin to offer a warranty. However, the devices can be tested and paid for in cash on site. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these devices and only sell what we understand.

Gamybos metai: 2007, Sąlyga: paruoštas naudoti (naudotas), A CNC turret punching machine by Amada for medium-format sheets, including an MP300 M loading unit, a Wilson X-Sharp grinding machine, and numerous standard and special punching tools, is available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300 kN, max. sheet size X/Y: 3000 mm / 1500 mm, max. sheet thickness: 6.35 mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128 m/min, repeatability: +/-0.1 mm, machine dimensions X/Y/Z: approx. 5100 mm / 3200 mm / 2300 mm, weight: approx. 18,000 kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet size X/Y: 3000 mm / 1500 mm, min. sheet size X/Y: 1000 mm / 300 mm, sheet thickness range: 0.8 mm – 6 mm, max. load capacity per pallet: 3,000 kg, max. stack height: 400 mm, max. sheet weight: 170 kg, max. pallets: 9, pallet change time: 25 s, sheet loading time: 18 s, weight: approx. 4,900 kg. 3) Tool grinding machine Wilson X-Sharp. Documentation available. Inspection on site is possible. Kwodewhp N Depfx Af Ijt

Gamybos metai: 1995, Sąlyga: paruoštas naudoti (naudotas), A Promecam (Amada) APX 103 CNC press brake is available. Press force: 1000 kN, working width: 3000 mm, distance between uprights: 2550 mm, gap opening: 370 mm, stroke: 100 mm, throat depth: 400 mm, approach speed: 70 mm/s, bending speed: 9 mm/s, return speed: 85 mm/s, drive power: 10.5 kW. Machine dimensions (L/W/H): approx. 3500 mm / 2200 mm / 2300 mm, weight: approx. 6400 kg, control: Amada Operateur, operating hours: 36,261 h. The machine is still in operation, thus the operating hours are increasing. Documentation is available. An on-site inspection is possible. Ksdswm Nn Repfx Af Ijwt

Sąlyga: naudotas, Number of spindles: 4 Drilling capacity in steel (diameter): 23 mm Drilling stroke: 150 mm Total power requirement: kW Machine weight approx.: t Space requirements approx.: m Kwodpjt Hw U Nsfx Af Ist

Sąlyga: naudotas, Gamybos metai: 2007, Sheet width: 3050 mm Sheet thickness: 6.35 mm Sheet thickness for stainless steel: 4.00 mm Sheet thickness for aluminium: 8.00 mm Hold-downs: 10 units Cutting angle: 0°40’ to 2°20’ degrees Distance between machine frames: 3340 mm Working height: 860 mm Table depth: 575 mm Control: GP 37W2 Strokes per minute: 13 - 33 Max. pressure: 315 bar Oil capacity: 100 litres Total power requirement: 6.0 kW Machine weight approx. 6030 + 1850 kg Well-maintained condition (!!) Current new price incl. accessories: approx. €110,000 Special price on request - Checked condition - Machine video - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control incl. information display * Main display with 4x operator panels * Operation/control of all functions * Up to 50 cutting programmes, each with 15 sequences Kwjdsxaaghspfx Af Iot - CNC electro-motorised backgauge * Travel speed up to 100 mm/sec - CNC electro-hydraulic adjustment of cutting angle - CNC electro-hydraulic blade clearance adjustment - Line lighting and sighting device to view scribe line (optical alignment) * Shearing according to optical marking - Manually adjustable table supports incl. ball transfers * Recessed handgrips in the front support table - 2x free-moving foot pedals - Operating manual and circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations & separate controls: * STATION 1 – AMADA conveyor belt with pneumatic sheet lifting device * STATION 2 – AMADA conveyor belt with pneumatic scrap diverter * STATION 3 – AMADA stacking device with scissor lift table - Wooden box with spare blades - 1x AMADA extra-long side gauge with support leg (length approx. 3,000 mm) - 2x AMADA extra-long front support arms

Sąlyga: naudotas, Gamybos metai: 2015, Operating hours machine: 31,888 (as of 17.01.2024) h Operating hours laser on: 19,090 (as of 17.01.2024) h Operating hours beam on: 6,475 (as of 17.01.2024) h Laser power: 4,000 watts Max. punching force: 300 kN Control unit: AMNC 3i Working area laser operation: 2,500 x 1,170 mm Working area punching operation: 3,050 x 1,525 mm Length: 7,870 mm Width: 5,880 mm Height: 2,666 mm Total connected load: 85 kVA X-axis: 100 m/min Y-axis: 80 m/min Machine weight approx.: 30,000 kg Kwsdpfjvb Ubyex Af Iet Standard equipment - Patented servo-electric twin drive - Punching force 300 kN - 32 tool stations (4 indexable stations) - Max. stroke rate: 400 - Max. material thickness: 6 mm - Automatic focus adjustment - Automatic gas pressure regulation - HS sensor cutting head - Nozzle cleaning - Splash guard - Good part flap Additional equipment - TSU Tool changer 300 Automation

Sąlyga: beveik kaip naujas (parodų įrenginys), FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package, standard from 1.5 m ➤ Fronius carriage ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator With this unit, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It features filler wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in bodywork applications. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further expanding the functions of the TPS unit. ----- IMMEDIATE DELIVERY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For clarification: we purchase nearly new used units, disassemble them, check everything thoroughly, replace any wear parts if necessary, and only after successful test welding do we release them for sale. "All" units are clean and have neither burn marks on the displays nor numerous burn holes or dents distributed over the unit! You buy from us an item that is presentable and does not look completely worn out! ►►►Will we receive an invoice when purchasing from you? Kwsdswbknbepfx Af Iet Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash upon personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the units on site and pay in cash. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – Fronius only, no other brands! We are experts with these units and never sell anything we are not familiar with.