Lazerinio pjovimo sistema

DNE - member of Bystronic group D-Power 1530 - 12000 Watt

Būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, aušinimo tipas: vanduo, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) Ffedpfjwbh Ifsx Ac How ➤ Fronius FK 4000 ➤ Fronius wire feeder case VR 4000 ➤ Fronius standard intermediate hose package from 1.5 m ➤ Fronius trolley ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator This unit can weld almost all materials, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. For this, you only need an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and load characteristic curves to further expand the functions of the TPS device. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, 1230 Vienna! ✔ Insured pallet shipping available! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For your information, we purchase used devices in excellent condition, disassemble them, check everything thoroughly, replace any worn parts if necessary, and only after a successful test weld do we approve them for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn holes or dents scattered on the device! When you buy from us, you get an item that is worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and the requirements for intra-community supply within the EU are met, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no margin to offer a warranty. However, the devices can be tested and paid for in cash on site. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these devices and only sell what we understand.

Būklė: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve Fjdpfxjfg E Hls Ac Hofw - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 30 h, Įranga: apsaugos šviesos užtvara, avarinis stabdymas, centralizuota tepimo sistema, dulkių šalinimas, dūmų ištraukimas, Tube Laser Cutting System – Ideal Entry-Level Solution. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for workshops, metal fabricators, and similar businesses looking to step into tube laser processing, this laser offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your production with precise cuts and user-friendly technology, adding value to your operation. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild steel: 12 mm - Stainless steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Max. tube diameter: Ø250 mm - Max. square profile dimensions: 160x160 mm - Max. rectangular profile dimensions: 200x150 mm - Min. tube diameter: 16 mm - Max. material length: 6000 mm - Min. remnant length: 65 mm - Discharge length: 3000 mm - Semi-automatic unloading unit: Option (6 m) - Max. material weight: 58 kg/m - Max. total workpiece weight: 350 kg - Profile types that can be cut: round, square, rectangular, elliptical - Open profile types that can be cut: I, C, L - Max. open profile dimensions: 240x240 mm Dynamics: - X-axis: 40 m/min - Y-axis: 94 m/min - Z-axis: 30 m/min - A-axis: 510 °/s Accuracy: - Positioning accuracy: ±0.2 mm - Repeatability: ±0.05 mm Fjdpfx Acerkntcj Hefw - Pipe center detection with capacitive sensor: Yes Additional Options Available for Configuration: Laser Power: - Upgrade to DURMA BRILASE 4 kW ADVANCED Fiber Laser Source (incl. chiller) + Durma head - Upgrade to DURMA BRILASE 6 kW ADVANCED Fiber Laser Source (incl. chiller) + Durma head Options: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar air) - CNC bevel head (+/- 45°) - Semi-automatic front loading system - Unloading table (6 m) with conveyor belt - Unloading table (3 m) with conveyor belt - Additional dongle software - Transformer 220, 440, 575 V Software Options: - Durma Cloud License + D-Mobile + Smart Watch - STEP file importer

Gamybos metai: 2004, būklė: naudotas, Ottevanger C5 Containerized Feed Mill Automated grinding and mixing line with a capacity of approx. 5 t/h. Including, among others, the following components: Fsdpfsq Hr Rzox Ac Hjfw - 55 kW Hammer Mill 650-375 - 11 kW 1000L Mixer PM1000 - Silos - Batch Weigher - Dosing Screws - Elevators - Hoppers - Control Cabinets

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. Fodpfx Aefz U S Esc Hjfw It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: naujas, Gamybos metai: 2025, Automatische Dachpaneelmaschine mit Schnappverschluss SL-1 auto wurde von unserem Unternehmen für die automatische Produktion von selbstverriegelnden Dachpaneelen entwickelt. Diese Maschine formt den Dachverschluss durch Walzen mithilfe spezieller Formwalzen. Gleichzeitig werden beim Profilieren Befestigungslöcher in die Paneele eingestanzt, um deren Fixierung zu ermöglichen. Die automatische Dachpaneelmaschine mit Schnappverschluss SL-1 auto besteht aus: - Walzprofilierstation, die mithilfe von zehn Walzenpaaren direkt das gewünschte Paneelprofil mit Klickfalzverschluss formt. Die Maschine verfügt über ein einfach verstellbares System zur Breitenanpassung: Zum Ändern der Breite genügt es, an einem speziellen Einstellrad zu drehen. Ein spezielles Werkzeug schneidet dabei Befestigungslöcher in die Paneele. Ffsdpfx Acjn Hqmme Hjw - Automatisierungssystem der Maschine mit den Hauptelementen: automatische Steuerung, manuelles Bedienfeld, Schaltschrank und Messrad. Über dieses System kann der Bediener das Walzen und Schneiden der Paneele im Automatikbetrieb programmieren. Die Stückzahl und Länge der zu produzierenden Paneele lassen sich einfach einstellen, danach muss nur noch das Blech eingelegt werden. Die Maschine produziert dann vollautomatisch Dachpaneele mit Klickfalz in gewünschter Länge und Stückzahl. Mehrfachoperationen (Multitasking) sind möglich. Mit der manuellen Steuerung lässt sich jeder Arbeitsschritt vorab testen, bevor die Maschine auf Automatikbetrieb geschaltet wird. - Tafelblechschere (Guillotineschere), speziell zum Schneiden von Klickfalzpaneelen verschiedener Breiten entwickelt. Die Spezialklingen ermöglichen präzise Schnitte und sorgen für eine hochwertige Endverarbeitung. Der Antrieb der Schere erfolgt elektrisch und erleichtert so das Schneiden. Als Zusatzausstattung bieten wir an: - Blechabwickler für die komfortable Zuführung des Coilblechs. - Vollautomatischer Abwickler für maximalen Automatisierungsgrad im Profilierprozess. - Sickenwalzen zur Herstellung zusätzlicher Querrippen für ein interessantes Design und erhöhte Steifigkeit der Paneele. - Sickenprofiliermaschine RPFM (Mikrowellenmaschinen) zur Ausformung von Mikrowellen auf den Dachpaneelen. Dank ihres geringen Gewichts kann die automatische Profiliermaschine SL-1 auto für selbstverriegelnde Paneele sowohl beim Bau von zivilen oder industriellen Objekten, in Fabrikhallen als auch direkt an der Baustelle eingesetzt werden. Die Nutzung direkt am Montageort spart Transportkosten und vermeidet Transportrisiken für die Dachbleche. Die Profilhöhe des installierten Schnappverschluss-Dachpaneels beträgt 26 mm. Als Option können wir die Maschine auch für eine Profilhöhe von 31 mm liefern. Die maximale Blechbreite beträgt 700 mm, die minimale Blechbreite 250 mm. Die automatische Dachpaneelmaschine SL-1 auto verfügt über eine spezielle Schutzverkleidung, die verhindert, dass Fremdkörper in den Arbeitsbereich der Maschine gelangen. Die automatische Rollformanlage mit Schnappverschluss SL-1 auto ist durch den Automatikmodus äußerst bedienungsfreundlich, reduziert den Arbeitsaufwand für den Bediener und sorgt für qualitativ hochwertige Dachpaneele bei hoher Produktivität.

Būklė: naudotas, Number of spindles: 4 Drilling capacity in steel (diameter): 23 mm Drilling stroke: 150 mm Fsdpfxot Hw U Ne Ac Hofw Total power requirement: kW Machine weight approx.: t Space requirements approx.: m

Būklė: naujas, Gamybos metai: 2026, Table length (raw material length): 6500 mm Table width (max. pipe diameter): 230 mm Cutting heads: 1 Control: CNC Workpiece weight: 300 kg Travel speed: 91 m/min Weight: 5750 kg Required space approx.: 12900 x 2370 x 2650 mm Tube laser with T-Loader Configuration: 1. Bodor Power laser source 6 kW 2. Bodor Genius premium laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Pneumatic chuck 5. Adaptive adjustment of jaw clamping force 6. Follow-servo blanking clamp 7. Support for compound clamping rollers 8. Active collision avoidance 9. Automatic tube inspection 10. Automatic tube edge detection and positioning 11. Automatic adjustment of cutting gas 12. Laser cutting process database 13. Air-saving continuous flow nozzle 14. Intelligent maintenance reminders 15. WIFI Internet connection 16. Water chiller 17. Extraction unit 18. Wear parts kit 19. Auxiliary feeding device T-Loader: - One-click setup - Material shortage alarm - Automatic loading Ffjdpswh Uldsfx Ac Hsw - Scratch-resistant pipe handling - Host safety lock - Pipe size range: Round pipes: 20 - 220 mm Square pipes: 20 - 220 mm Rectangular pipe: 220 mm ≥ side length ≥ 20 mm - Max. pipe weight: 300 kg - Tube loading length range: 4500 mm - 6500 mm - Maximum loading weight: 1800 kg Cutting capacity: Mild steel: 16 mm Stainless steel: 12 mm Aluminium: 10 mm Wall thickness for mild steel* (mm): If OD < 50: WT = 1.2 If OD = 50: WT = 2.5% × OD Max. finished part length: 4500 mm OPTIONAL: LANTEK FLEX3D TUBES PLUS

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, veikimo valandos: 55 771 h, lazero valandos: 35 157 h, lazerio galia: 3 200 W, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, aliuminio lakšto storis (maks.): 8 mm, stalo ilgis: 3 000 mm, stalo plotis: 1 500 mm, X ašies eiga: 3 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 150 mm, pozicionavimo greitis: 140 m/min, pozicionavimo tikslumas: 0,02 mm, paskutinio kapitalinio remonto metai: 2024, padavimo ilgis X ašis: 3 000 mm, padavimo eiga Y ašimi: 1 500 mm, padavimo ilgis Z ašis: 150 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, dokumentacija / vadovas, Lazeris veikia, galima apžiūra ir išbandymas. Reguliariai prižiūrėtas, geros techninės būklės. Visi veidrodžiai buvo pakeisti 2024 metais. Fodev Hxbbopfx Ac Hjfw

Būklė: naujas, Fastech Horizontal Band Saw Semi-Automatic BMSY 360 DGH ECO Round cutting capacity mm: 360 Flat cutting capacity mm: 510 x 360 Square cutting capacity mm: 360 +30° round cutting capacity mm: 360 +30° flat cutting capacity mm: 440 x 360 +30° square cutting capacity mm: 360 +45° round cutting capacity mm: 360 +45° flat cutting capacity mm: 390 x 360 +45° square cutting capacity mm: 360 +60° round cutting capacity mm: 200 +60° flat cutting capacity mm: 200 x 360 +60° square cutting capacity mm: 200 -30° round cutting capacity mm: 360 -30° flat cutting capacity mm: 440 x 360 -30° square cutting capacity mm: 360 -45° round cutting capacity mm: 360 -45° flat cutting capacity mm: 390 x 360 -45° square cutting capacity mm: 360 -60° round cutting capacity mm: 260 -60° flat cutting capacity mm: 260 x 360 -60° square cutting capacity mm: 260 Main drive motor power kW: 3 Hydraulic pump power kW: 0.37 Coolant pump motor power kW: 0.12 Infinitely variable band speed: m/min 20 - 100 Saw blade dimensions mm: 4800 x 34 x 1.1 Worktable height mm: 860 Weight kg: 1450 Length / Depth / Height mm: 2650 / 1210 / 1870 Ffsdpsg Ekttofx Ac Hew Double miter saw Infinitely variable band speed Hydraulic vice Heavy-duty gearbox Hydromechanical saw blade tensioning Saw blade cleaning brush Digital miter angle display