Mep Cobra 350 Sx pirkti naudotą (117)

Gamybos metai: 2003, Sąlyga: naudotas, Cutting capacity – Round: 300 mm Saw blade dimensions: 3320 x 27 x 0.9 mm Itodpora Rrljfx Abkor Cutting capacity – Rectangle: 330 x 260 mm Cutting capacity – Square: 260 mm Control system: Evolution Working height: 870 mm Saw blade speed: 40 / 80 m/min Machine weight: approx. 1050 kg

Sąlyga: naudotas, Radial fan, chip extraction blower, ventilator, extraction system, dust extraction unit, chip blower, extraction unit -Manufacturer: MEP, extraction unit with transport frame -Type: unfortunately without type designation -Motor: Cantoni 0.75 kW / 2840 rpm -Base frame: on castors -Dimensions: 950/480/H1860 mm Itodpfxoh Szarj Abkjr -Weight: 40 kg

Sąlyga: labai geros būklės (naudotas), veikimo valandos: 1 170 h, MEP automatic bandsaw Model: Shark 310 AX Round capacity: 230 mm Rectangular capacity: 310 x 220 mm Isdpfsw Hy Hkjx Abkjtr Blade size: 2850 x 27 x 0.9 mm Operating hours: 1,170 Very good condition

Gamybos metai: 1997, Sąlyga: paruoštas naudoti (naudotas), Single wire diameter: 6mm-14mm, double wire diameter: 6mm-10mm, max. bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank capacity: 300l. Machine dimensions (L/W/H): approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection possible. Itjdpfeuwrv Dox Abksr

Sąlyga: geras (naudotas), Apvalaus plieno pjovimo diapazonas ties 45°: 250 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 280 mm, pjovimo aukštis (maks.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity at 45º: 250 mm round 250 mm square Saw speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Mitre angle: 0 - 60º Equipped with: - Cooling system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Ijdpfx Astt Nd Rsbkstr Machine dimensions (LxWxH): 190 x 120 x 135 cm

Sąlyga: geras (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 750 mm, bendras ilgis: 450 mm, bendras plotis: 450 mm, Band saw machines - base frame with front flap the colour RAL 6011 reseda green Itsdsvzak Hepfx Abkor

Sąlyga: naujas, MEP SHARK 281 CCS Metal Band Saw with Semi-Automatic Descent. Item number: SH281CCS Motor Power: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 375 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 230x230 / 280x200 mm Cutting Capacity at 45° right: 190 / 180x180 / 180x180 mm Cutting Capacity at 45° left: — Cutting Capacity at 60° right: — Cutting Capacity at 60° left: — Description: - Saw bow, vice assembly, and base made of high-strength cast iron - Precision angle marking on the cast iron frame - Electrical system (with fully identifiable wiring and 24 V low voltage system) - IP 55 switch lever for manual cycles (if equipped) - Rotating chip brush for the saw blade - Rapid-approach closing device with quick-action vice - Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left - Bi-metal saw band 2950 x 27 x 0.9 mm - Includes service tools, operating manuals, and spare parts ordering instructions in the user’s language - SHARK 281 available with manual function; SHARK 281 CCS with manual mode and automatic descent by gravity - CCS (Cut Control System) with: (A) Selector switch for manual and automatic cutting, (B) Adjustable cutting speed, (C) Hydraulic brake with reservoir, (D) End stop for blade stopping; also retrofittable to existing machines - Quick-release vice adjustment - Hydraulic sensor for blade tension display - Electric coolant pump for blade cooling and lubrication, with accessible coolant tray above the base - Pneumatic vice versions (MA): vice opens and closes via manual valve (optional pedal control available) MEP SHARK 281 SXI evo [Semi-Automatic] Item number: SH281SXI Motor Power: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 435 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 230x230 / 280x200 mm Cutting Capacity at 45° right: 190 / 180x180 / 180x180 mm Cutting Capacity at 45° left: — Cutting Capacity at 60° right: — Cutting Capacity at 60° left: — Description Semi-automatic operation: The vice closes and the motor starts, the saw head lowers for the cut, the motor stops, the saw head rises, and the vice opens. Key Features: - New centralized control console on an articulated arm - Latest-generation hydraulic control unit: highly efficient and energy-saving - Base with extendable coolant tray Iodpfx Abjcgbp Iekjtr The machine is fully compliant with all CE standards! For additional technical details, please refer to the attached PDF document.

Gamybos metai: 2002, Sąlyga: geras (naudotas), MEP CONDOR 90 CNC MR automatic disc saw for aluminum profiles with controlled feed. Used, in excellent condition. Itedpfx Aeikztpsbksr

Sąlyga: geras (naudotas), Gamybos metai: 1998, pjūklo disko skersmuo: 300 mm, For sale is a MEP Tiger 300, a high-quality circular saw for metalworking applications. This machine was built in 1998 but remains in good condition. It is perfectly suited for workshops and production environments requiring a reliable and precise sawing solution. Machine features: Manufacturer: MEP (Mecchia Eredi Pio) Model: Tiger 300 Year of manufacture: 1998 Saw type: Semi-automatic/manual circular saw Blade diameter: 300 mm Cutting capacity: Suitable for round materials, square profiles, and mitre cuts Cutting angles: 90° and 45°, with mitre cuts possible in both directions Materials: Ideal for cutting iron, steel, and other metals Itjdpfx Abov Tlcroker Condition: Good condition Coolant supply: Integrated cooling system for improved cut quality and extended blade life

Gamybos metai: 2016, Sąlyga: naudotas, MEP pjaustymo ir lenkimo staklės, SYNTAX 28 Vienguba strypas: Ø10 - Ø28 mm (#3 - #8) Dvigubi strypai: iki Ø20 mm (#6) • Strypo buvimo detektorius • Daugiafunkcinis padavimas: spaustuvas ir transportavimo volai • Dvigubi žirklės • Lenkimo kaiščiai pagal tarptautinius standartus Itedoxl Avvepfx Abkjr Pastaba: Šis vaizdo įrašas yra gamintojo reklaminė demonstracija apie modelį SYNTAX 28. Jame nerodoma konkreti šiuo metu parduodama linija. Vienguba strypas: ∅10 - ∅28 mm (#3 - #8) Dvigubi strypai: Iki ∅20 mm (#6)

Sąlyga: naujas, MEP Bandsaw SHARK 331-1 NC 5.0 Spider All MEP models available on request! Motor power: 2.2 kW Vice opening: 340 mm Blade dimensions: 3650x27x0.9 mm Weight: 1,240 kg Cutting speed: 15 – 100 m/min, stepless Cutting capacity at 0°: 280 / 260x260 / 330x260 mm Iodpfx Abochhdiokstr Cutting capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting capacity at 45° left: — Cutting capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting capacity at 60° left: — Description - Fully automatic hydraulic bandsaw - Mitre cuts up to 60° to the left possible - Blade length: 3650x27x0.9 mm - Single stroke: 600 mm (programmable up to 10 m) - Intuitive touchscreen control - Saw arm made of spheroidal cast iron – robust and stable - Required floor space: 3.4 m² - Dimensions: 1,900 mm width x 1,800 mm depth For further technical data, please refer to the attached PDF document.

Sąlyga: naudotas, MEP 40 Straightening and Cutting Bench Bar Capacity: - n.1 Ø 40 mm - n.2 Ø 32 mm - n.3 Ø 26 mm - n.4 Ø 20 mm - n.5 Ø 16 mm 22 Fy = 600 N/mm² – ft = 650 N/mm² Minimum cutting length: 800 mm Iedovtx Eyepfx Abketr Maximum length: 12,000 mm Measurement tolerance: +/- 1 mm/m Maximum positioning speed: 2 m/s Measurement evacuation speed: 2.2 m/s Number of compartments: 5 + 5

Sąlyga: naujas, MEP SHARK 230-1 NC HS 5.0 Double-Column Metal Band Saw Article Number: SH230-1NCHS Motor Power: 2.2 kW Vice Opening: 235 mm Blade Dimensions: 2950x27x0.9 mm Itodpfxechhfuj Abkor Weight: 1,000 kg Cutting Speed: 15 - 100 m/min (stepless) Cutting Capacity 0°: 230 / 230x230 mm Cutting Capacity 45° right: Cutting Capacity 45° left: Cutting Capacity 60° right: Cutting Capacity 60° left: Description: SHARK 230-1 NC 5.0, electro-hydraulic double-column fully automatic band saw with both semi-automatic and fully automatic operating modes. Max. remnant length: 70 mm. Bundle cutting: 230 x 230 mm. Numerically controlled band saw with the new MEP 50 – Windows-based control system. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke: 500 mm, repeatable to saw any length. Simple programming – enter cutting length and quantity, then press "START". Electronic blade tension control. Automatic cutting load monitoring through a servo valve mounted directly on the cylinder. Rotation control of the blade with instant stop in the event of a jammed saw blade.

Sąlyga: naujas, Motor power: 1.1/2.2 kW Vise opening: 130 mm Blade dimensions: 350x32x2.5 mm Weight: 220 kg Speed: 30/60 rpm Cutting capacity at 0°: 115 / 100 / 130x80 mm Cutting capacity at 45° right: 100 / 85 / 90x80 mm Cutting capacity at 45° left: 75 / 75 / 90x65 mm Cutting capacity at 60° right: Cutting capacity at 60° left: Description: Manual crosscut saw for mitre cuts from 45° right to 45° left, featuring high cutting performance. Robust cast iron construction, practical and safe for every cut. The FALCON 352 is available as a workbench version or on a stand (accessory). The machine is equipped with a two-speed three-phase motor. Upon request, the machine is supplied with a pneumatic vice (FALCON 352 MA; when the head is lowered, the vice closes automatically). This version is always delivered with a stand. Standard features: - Externally adjustable clutch - Locking mechanism with vice - Slidable on prismatic guide with adjustable strip - Fixed vice jaws with axial adjustment for clamping the workpiece close to the cutting line - Adjustable steel swarf remover - 48 V electric coolant pump for blade cooling and lubrication - Double return spring for securing the loading table - Machine can be lifted - Worm shaft mounted on bearing pair - Saw blade shaft mounted on offset stamp - 2 speeds: 30 and 60 rpm Isdpfxjcgrkyj Abkstr - Vice opening: 130 mm - Machine supplied without saw blade Electrical equipment: - Electrical control panel - Marked cable connections - Main safety switch lockable with padlock - Emergency stop device - Phase failure protection - Speed selector switch - Thermal magnetic protection - Undervoltage release - Motor with protection class IP 54 - Low-voltage control unit 24 V - Electric coolant pump 48 V - Motor 1.1/2.2 kW – 400 Volt For further technical data, please refer to the attached PDF document.

Sąlyga: naujas, MEP TIGER 372 CNC LR 4.0 Itedpfx Aschkyrebksr Item number: TI372CNCLR Motor power: 4.0 kW Vise opening: 190 mm Blade dimensions: 370x32x3 Weight: 1,060 kg Cutting speed: 15-150 rpm Cutting capacity at 0°: 120 / 110 / 180x100 mm Cutting capacity at 45° right: 115 / 100 / 120x100 mm Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description Electromechanical automatic vertical circular saw with semi-automatic function for use with HSS saw blades, designed for precision cuts from 45° right to 60° left. Equipped with multi-microprocessors and dual-axis control, allowing programming of up to 80 different cutting programs, each with individual cut length and quantity, for the same material cross section. Standard equipment: - Saw head slides on linear recirculating ball double-guides - Saw head feed with electromechanical cylinder - Rotary axis with thrust bearing - Three-stage gearbox - Material feed (length 1000 mm) via ball screw with stepper motor and mobile feeding vise - Vise opening 190 mm - Saw head stroke programmable directly from the control panel, for adjustment to workpiece height - Pneumatic vertical vise - HSS DMO 5 saw blade Ø 370x32x3 for solid and profile material - Swarf removal brush - Machine designed for pallet truck transport, including tool kit and operator’s manual Electrical equipment: - Control panel - Up to 80 different cutting programs storable - Operation readiness indicator light - Main safety switch - Console for programming and control, LCD display with automatic diagnostics - LED check display panel for machine function monitoring - Emergency stop button - Speed selector switch - Thermomagnetic protection - Undervoltage release - IP 55 protected control handle - 24V low voltage system - Electric coolant device for saw blade lubrication and cooling (option for micro-mist system) - Motor 4.0 kW - 400 V --- MEP TIGER 372 CNC LR 4.0 RC with Automatic Mitre Item number: TI372CNC LR 4.0 RC Motor power: 4.0 kW Vise opening: 190 mm Blade dimensions: 370x32x3 Weight: 1,060 kg Cutting speed: 15-150 rpm Cutting capacity at 0°: 120 / 110 / 180x100 mm Cutting capacity at 45° right: 115 / 100 / 120x100 mm Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description Automatic electromechanical vertical circular saw for use with HSS saw blades, for series cutting with automatic mitre adjustment from -45° to +45° on steel. In semi-automatic cycle, mitre cuts can be made between -45° and +60°. Equipped with multi-microprocessors and dual-axis control, allowing programming of up to 80 different cutting programs, each with individual cut length and quantity, for the same material cross section. Standard equipment: - Saw head slides on linear recirculating ball double-guides - Saw head feed with electromechanical cylinder - Rotary axis with thrust bearing - Three-stage gearbox - Material feed (length 1000 mm) via ball screw with stepper motor and mobile feeding vise - Vise opening 190 mm - Saw head stroke programmable directly from the control panel, for adjustment to workpiece height - Pneumatic vertical vise - HSS DMO 5 saw blade Ø 370x32x3 for solid and profile material - Swarf removal brush Electrical equipment: - Control panel - Up to 80 different cutting programs storable - Operation ready indicator - Main safety switch - Console for programming and control, LCD display with autodiagnostics - LED indicator panel for machine function monitoring

Sąlyga: naujas, MEP TIGER 352 NC 5.0 [Fully Automatic] Article Number: TI352NC Motor Power: 3.0 kW Vice Opening: 190 mm Blade Dimensions: 350x32x2.5 mm Weight: 680 kg Blade Speed: 15 - 90 m/min. Cutting Capacity 0°: 115 / 95 / 180x95 mm Cutting Capacity 45° Right: 110 / 95 / 125x95 mm Cutting Capacity 45° Left: Cutting Capacity 60° Right: Cutting Capacity 60° Left: Description Electropneumatic, vertical, linear-guided automatic saw for the use of HSS saw blades, suitable for series cuts from 60° left to 45° right on steel. The machine also operates in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by MEP’s latest-generation CNC system, enabling programming of up to 1,000 different cutting programs—each with different lengths and quantities—for the same material thickness. FEATURES: - New centralized control console on an articulated arm for easy emergency stop access from any working position. - NEW: Fieldbus communication system (Modbus protocol) with dual microprocessor and serial connection. - Display with 20 characters x 4 lines showing technical parameters: + Blade speed + Number of programmed and completed cuts + Blade thickness + Feed length + Cutting time + Ammeter + Indication of over 100 diagnostic and warning messages. - NEW: Display and logging of alarm and fault messages with incident review capability. - NEW: 600 mm material feed with stepper motor and ball screw mounted on opposing bearings. Iodpechhhdofx Abkjtr - NEW: Electronic inverter for continuous regulation of blade speed from 15 – 90 rpm (optional 30 to 150 rpm). - NEW: Low-voltage control panel: Polyurethane membrane keypad with thermoformed, raised buttons and actuation confirmation signal. - Double gear set for high cutting performance. - Saw head glides on dual linear guideways with recirculating ball bearings. - Coaxial cylinder with bypass valve for rapid approach and potentiometric linear transducer for head position detection. - Programmable saw arm stroke from the control panel for adaptation to material size. - Adaptive cutting pressure control. - Rotating table with central pin and axial bearing for precise miter cuts. - Pneumatic vertical vice. - Electric coolant pump for blade cooling and lubrication. - Chip removal brush. - Signal lamp for program end or emergency stop. - HSS saw blade Ø 350 x 32 x 2.5 mm, suitable for solid and profile material. - Prepared for installation of a minimum quantity lubrication system (OPTIONAL), in addition to the standard emulsion oil lubrication system. For further technical data, please refer to the attached PDF document.

Sąlyga: naujas, MEP SHARK 332-1 CCS Metal Band Saw with Semi-Automatic Descent. Authorized MEP Dealer – Please send us your inquiry! Motor power: 1.5/1.8 kW Vice opening: 335 mm Blade dimensions: 3650x27x0.9 mm Weight: 640 kg Cutting speed: 40/80 m/min Cutting capacity at 0°: 300 mm / 260x260 mm / 330x260 mm Cutting capacity at 45° right: 260 mm / 250x250 mm / 270x200 mm Cutting capacity at 45° left: 200 mm / 180x180 mm / 200x160 mm Cutting capacity at 60° right: 180 mm / 170x170 mm / 170x170 mm Cutting capacity at 60° left: -- Description – MEP Metal Cutting Saw: CCS version operating principle: Once the material is positioned and the vices are closed, the cutting process is initiated. The arm lowers by gravity, counterbalanced by a spring and regulated by a hydraulic brake cylinder. After the cut is completed, the saw arm is manually returned to the loading position for material feed. Iodpfjcgbt Rex Abkotr Electrical control panel (labeled wiring, operating status indicator, safety main switch lockable via padlock, selector or speed switch, emergency stop, thermal-magnetic protection, 24V low voltage system) Electronic bandsaw blade tension converter with on-screen display. Manual vice with rapid clamping. Base frame with integrated coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for band cooling and lubrication. Chip removal brush. Adjustable precision stops for consistent cut lengths. Machine designed for pallet truck handling. Bimetal saw blade for solid and structural steel. Toolkit and operating instructions included. Motor: 1.5/1.8 kW 2 speeds: 40/80 m/min Vice opening: 335 mm Bandsaw blade: 3650 x 27 x 0.9 mm Weight: 640 kg Refer to image for cutting data. Further technical details can be found in the attached PDF document.